Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

[linux-2.6-omap-h63xx.git] / include / asm-arm / arch-pxa / irqs.h

diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index 67ed43674c635a66a3a947accb3a757810fdd260..b76ee6d1f5b44b7949a29504561086aa41ef6c92 100644 (file)
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -11,14 +11,9 @@
  */
 
 
-#ifdef CONFIG_PXA27x
-#define PXA_IRQ_SKIP   0
-#else
-#define PXA_IRQ_SKIP   7
-#endif
-
-#define PXA_IRQ(x)     ((x) - PXA_IRQ_SKIP)
+#define PXA_IRQ(x)     (x)
 
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_SSP3       PXA_IRQ(0)      /* SSP3 service request */
 #define IRQ_MSL                PXA_IRQ(1)      /* MSL Interface interrupt */
 #define IRQ_USBH2      PXA_IRQ(2)      /* USB Host interrupt 1 (OHCI) */
@@ -26,6 +21,8 @@
 #define IRQ_KEYPAD     PXA_IRQ(4)      /* Key pad controller */
 #define IRQ_MEMSTK     PXA_IRQ(5)      /* Memory Stick interrupt */
 #define IRQ_PWRI2C     PXA_IRQ(6)      /* Power I2C interrupt */
+#endif
+
 #define IRQ_HWUART     PXA_IRQ(7)      /* HWUART Transmit/Receive/Error (PXA26x) */
 #define IRQ_OST_4_11   PXA_IRQ(7)      /* OS timer 4-11 matches (PXA27x) */
 #define        IRQ_GPIO0       PXA_IRQ(8)      /* GPIO0 Edge Detect */
@@ -55,36 +52,43 @@
 #define        IRQ_RTC1Hz      PXA_IRQ(30)     /* RTC HZ Clock Tick */
 #define        IRQ_RTCAlrm     PXA_IRQ(31)     /* RTC Alarm */
 
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_TPM                PXA_IRQ(32)     /* TPM interrupt */
 #define IRQ_CAMERA     PXA_IRQ(33)     /* Camera Interface */
+#endif
 
-#define PXA_INTERNAL_IRQS 34
-#else
-#define PXA_INTERNAL_IRQS 32
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4       PXA_IRQ(13)     /* SSP4 service request */
+#define IRQ_CIR                PXA_IRQ(34)     /* Consumer IR */
+#define IRQ_TSI                PXA_IRQ(36)     /* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2      PXA_IRQ(38)     /* USIM2 Controller */
+#define IRQ_GRPHICS    PXA_IRQ(39)     /* Graphics Controller */
+#define IRQ_MMC2       PXA_IRQ(41)     /* MMC2 Controller */
+#define IRQ_1WIRE      PXA_IRQ(44)     /* 1-Wire Controller */
+#define IRQ_NAND       PXA_IRQ(45)     /* NAND Controller */
+#define IRQ_USB2       PXA_IRQ(46)     /* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0    PXA_IRQ(49)     /* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1    PXA_IRQ(50)     /* EXT_WAKEUP1 */
+#define IRQ_DMEMC      PXA_IRQ(51)     /* Dynamic Memory Controller */
+#define IRQ_MMC3       PXA_IRQ(55)     /* MMC3 Controller (PXA310) */
 #endif
 
-#define GPIO_2_x_TO_IRQ(x)     \
-                       PXA_IRQ((x) - 2 + PXA_INTERNAL_IRQS)
+#define PXA_GPIO_IRQ_BASE      (64)
+#define PXA_GPIO_IRQ_NUM       (128)
+
+#define GPIO_2_x_TO_IRQ(x)     (PXA_GPIO_IRQ_BASE + (x))
 #define IRQ_GPIO(x)    (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
 
-#define IRQ_TO_GPIO_2_x(i)     \
-                       ((i) - IRQ_GPIO(2) + 2)
+#define IRQ_TO_GPIO_2_x(i)     ((i) - PXA_GPIO_IRQ_BASE)
 #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
 
-#if defined(CONFIG_PXA25x)
-#define PXA_LAST_GPIO  84
-#elif defined(CONFIG_PXA27x)
-#define PXA_LAST_GPIO  127
-#endif
-
 /*
  * The next 16 interrupts are for board specific purposes.  Since
  * the kernel can only run on one machine at a time, we can re-use
  * these.  If you need more, increase IRQ_BOARD_END, but keep it
  * within sensible limits.
  */
-#define IRQ_BOARD_START                (IRQ_GPIO(PXA_LAST_GPIO) + 1)
+#define IRQ_BOARD_START                (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
 #define IRQ_BOARD_END          (IRQ_BOARD_START + 16)
 
 #define IRQ_SA1111_START       (IRQ_BOARD_END)
@@ -222,3 +226,24 @@
 #define IRQ_LOCOMO_GPIO_BASE   (IRQ_BOARD_START + 1)
 #define IRQ_LOCOMO_LT_BASE     (IRQ_BOARD_START + 2)
 #define IRQ_LOCOMO_SPI_BASE    (IRQ_BOARD_START + 3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_GPIO(IRQ_BOARD_END) + 1 + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif