/* Prints the ioctl in a human-readable format */
extern void v4l_printk_ioctl(unsigned int cmd);
+/* Prints the ioctl and arg in a human-readable format */
+extern void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg);
+
/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
#define v4l_print_ioctl(name, cmd) \
do { \
V4L2_IDENT_UNKNOWN = 0,
/* module saa7115: reserved range 100-149 */
+ V4L2_IDENT_SAA7113 = 103,
V4L2_IDENT_SAA7114 = 104,
V4L2_IDENT_SAA7115 = 105,
/* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */
#define AUDC_SET_RADIO _IO('d',88)
-/* select from TV,radio,extern,MUTE, to be replaced with VIDIOC_INT_S_AUDIO_ROUTING */
-#define AUDC_SET_INPUT _IOW('d',89,int)
-
-/* msp3400 ioctl: will be removed in the near future, to be replaced by
- VIDIOC_INT_S_AUDIO_ROUTING. */
-struct msp_matrix {
- int input;
- int output;
-};
-#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix)
-
/* tuner ioctls */
/* Sets tuner type and its I2C addr */
register contains invalid or erroneous data -EIO is returned. Note that
you must fill in the 'id' member and the 'field' member (to determine
whether CC data from the first or second field should be obtained). */
-#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data *)
+#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data)
/* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can
be made. */
-#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident *)
+#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident)
/* Sets I2S speed in bps. This is used to provide a standard way to select I2S
clock used by driving digital audio streams at some board designs.
};
/* These internal commands should be used to define the inputs and outputs
- of an audio/video chip. They will replace AUDC_SET_INPUT.
- The v4l2 API commands VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT,
- VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT are meant to be used by the
- user. Internally these commands should be used to switch inputs/outputs
+ of an audio/video chip. They will replace the v4l2 API commands
+ VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT
+ that are meant to be used by the user.
+ The internal commands should be used to switch inputs/outputs
because only the driver knows how to map a 'Television' input to the precise
input/output routing of an A/D converter, or a DSP, or a video digitizer.
These four commands should only be sent directly to an i2c device, they
should not be broadcast as the routing is very device specific. */
#define VIDIOC_INT_S_AUDIO_ROUTING _IOW ('d', 109, struct v4l2_routing)
-#define VIDIOC_INT_G_AUDIO_ROUTING _IOR ('d', 110, struct v4l2_routing *)
+#define VIDIOC_INT_G_AUDIO_ROUTING _IOR ('d', 110, struct v4l2_routing)
#define VIDIOC_INT_S_VIDEO_ROUTING _IOW ('d', 111, struct v4l2_routing)
-#define VIDIOC_INT_G_VIDEO_ROUTING _IOR ('d', 112, struct v4l2_routing *)
+#define VIDIOC_INT_G_VIDEO_ROUTING _IOR ('d', 112, struct v4l2_routing)
#endif /* V4L2_COMMON_H_ */