* Authors: Ben Greear <greearb@candelatech.com>
* Please send support related email to: vlan@scry.wanfear.com
* VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
- *
+ *
* Fixes: Mar 22 2001: Martin Bokaemper <mbokaemper@unispherenetworks.com>
* - reset skb->pkt_type on incoming packets when MAC was changed
* - see that changed MAC is saddr for outgoing packets
* Oct 20, 2001: Ard van Breeman:
* - Fix MC-list, finally.
* - Flush MC-list on VLAN destroy.
- *
+ *
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* TODO: Confirm this will work with VLAN headers... */
return arp_find(veth->h_dest, skb);
-#endif
+#endif
default:
printk(VLAN_DBG
- "%s: unable to resolve type %X addresses.\n",
- dev->name, (int)veth->h_vlan_encapsulated_proto);
-
+ "%s: unable to resolve type %X addresses.\n",
+ dev->name, ntohs(veth->h_vlan_encapsulated_proto));
+
memcpy(veth->h_source, dev->dev_addr, ETH_ALEN);
break;
- };
+ }
return 0;
}
static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
{
- if (VLAN_DEV_INFO(skb->dev)->flags & 1) {
+ if (VLAN_DEV_INFO(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
if (skb_shared(skb) || skb_cloned(skb)) {
struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
kfree_skb(skb);
/* Lifted from Gleb's VLAN code... */
memmove(skb->data - ETH_HLEN,
skb->data - VLAN_ETH_HLEN, 12);
- skb->mac.raw += VLAN_HLEN;
+ skb->mac_header += VLAN_HLEN;
}
}
}
/*
- * Determine the packet's protocol ID. The rule here is that we
+ * Determine the packet's protocol ID. The rule here is that we
* assume 802.3 if the type field is short enough to be a length.
* This is normal practice and works for any 'now in use' protocol.
*
*
*/
int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type* ptype, struct net_device *orig_dev)
+ struct packet_type* ptype, struct net_device *orig_dev)
{
unsigned char *rawp = NULL;
- struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data);
+ struct vlan_hdr *vhdr;
unsigned short vid;
struct net_device_stats *stats;
unsigned short vlan_TCI;
__be16 proto;
+ if (dev->nd_net != &init_net) {
+ kfree_skb(skb);
+ return -1;
+ }
+
+ if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
+ return -1;
+
+ if (unlikely(!pskb_may_pull(skb, VLAN_HLEN))) {
+ kfree_skb(skb);
+ return -1;
+ }
+
+ vhdr = (struct vlan_hdr *)(skb->data);
+
/* vlan_TCI = ntohs(get_unaligned(&vhdr->h_vlan_TCI)); */
vlan_TCI = ntohs(vhdr->h_vlan_TCI);
stats->rx_packets++;
stats->rx_bytes += skb->len;
- skb_pull(skb, VLAN_HLEN); /* take off the VLAN header (4 bytes currently) */
-
- /* Need to correct hardware checksum */
- skb_postpull_rcsum(skb, vhdr, VLAN_HLEN);
+ /* Take off the VLAN header (4 bytes currently) */
+ skb_pull_rcsum(skb, VLAN_HLEN);
/* Ok, lets check to make sure the device (dev) we
* came in on is what this VLAN is attached to.
#ifdef VLAN_DEBUG
printk(VLAN_DBG "%s: dropping skb: %p because came in on wrong device, dev: %s real_dev: %s, skb_dev: %s\n",
- __FUNCTION__, skb, dev->name,
- VLAN_DEV_INFO(skb->dev)->real_dev->name,
+ __FUNCTION__, skb, dev->name,
+ VLAN_DEV_INFO(skb->dev)->real_dev->name,
skb->dev->name);
#endif
kfree_skb(skb);
#ifdef VLAN_DEBUG
printk(VLAN_DBG "%s: priority: %lu for TCI: %hu (hbo)\n",
- __FUNCTION__, (unsigned long)(skb->priority),
+ __FUNCTION__, (unsigned long)(skb->priority),
ntohs(vhdr->h_vlan_TCI));
#endif
stats->multicast++;
break;
- case PACKET_OTHERHOST:
+ case PACKET_OTHERHOST:
/* Our lower layer thinks this is not local, let's make sure.
* This allows the VLAN to have a different MAC than the underlying
* device, and still route correctly.
break;
default:
break;
- };
+ }
/* Was a VLAN packet, grab the encapsulated protocol, which the layer
* three protocols care about.
* won't work for fault tolerant netware but does for the rest.
*/
if (*(unsigned short *)rawp == 0xFFFF) {
- skb->protocol = __constant_htons(ETH_P_802_3);
+ skb->protocol = htons(ETH_P_802_3);
/* place it back on the queue to be handled by true layer 3 protocols.
*/
/*
* Real 802.2 LLC
*/
- skb->protocol = __constant_htons(ETH_P_802_2);
+ skb->protocol = htons(ETH_P_802_2);
/* place it back on the queue to be handled by upper layer protocols.
*/
}
/*
- * Create the VLAN header for an arbitrary protocol layer
+ * Create the VLAN header for an arbitrary protocol layer
*
* saddr=NULL means use device source address
* daddr=NULL means leave destination address (eg unresolved arp)
* physical devices.
*/
int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
- unsigned short type, void *daddr, void *saddr,
- unsigned len)
+ unsigned short type,
+ const void *daddr, const void *saddr, unsigned len)
{
struct vlan_hdr *vhdr;
unsigned short veth_TCI = 0;
* fixes some programs that get confused when they see a VLAN device
* sending a frame that is VLAN encoded (the consensus is that the VLAN
* device should look completely like an Ethernet device when the
- * REORDER_HEADER flag is set) The drawback to this is some extra
+ * REORDER_HEADER flag is set) The drawback to this is some extra
* header shuffling in the hard_start_xmit. Users can turn off this
* REORDER behaviour with the vconfig tool.
*/
- build_vlan_header = ((VLAN_DEV_INFO(dev)->flags & 1) == 0);
+ if (!(VLAN_DEV_INFO(dev)->flags & VLAN_FLAG_REORDER_HDR))
+ build_vlan_header = 1;
if (build_vlan_header) {
vhdr = (struct vlan_hdr *) skb_push(skb, VLAN_HLEN);
} else {
vhdr->h_vlan_encapsulated_proto = htons(len);
}
+
+ skb->protocol = htons(ETH_P_8021Q);
+ skb_reset_network_header(skb);
}
/* Before delegating work to the lower layer, enter our MAC-address */
if (build_vlan_header) {
/* Now make the underlying real hard header */
- rc = dev->hard_header(skb, dev, ETH_P_8021Q, daddr, saddr, len + VLAN_HLEN);
-
- if (rc > 0) {
+ rc = dev_hard_header(skb, dev, ETH_P_8021Q, daddr, saddr,
+ len + VLAN_HLEN);
+ if (rc > 0)
rc += VLAN_HLEN;
- } else if (rc < 0) {
+ else if (rc < 0)
rc -= VLAN_HLEN;
- }
- } else {
+ } else
/* If here, then we'll just make a normal looking ethernet frame,
* but, the hard_start_xmit method will insert the tag (it has to
* be able to do this for bridged and other skbs that don't come
* down the protocol stack in an orderly manner.
*/
- rc = dev->hard_header(skb, dev, type, daddr, saddr, len);
- }
+ rc = dev_hard_header(skb, dev, type, daddr, saddr, len);
return rc;
}
* OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs...
*/
- if (veth->h_vlan_proto != __constant_htons(ETH_P_8021Q)) {
+ if (veth->h_vlan_proto != htons(ETH_P_8021Q)) {
int orig_headroom = skb_headroom(skb);
unsigned short veth_TCI;
return 0;
}
-int vlan_dev_set_ingress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+void vlan_dev_set_ingress_priority(const struct net_device *dev,
+ u32 skb_prio, short vlan_prio)
{
- struct net_device *dev = dev_get_by_name(dev_name);
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- /* see if a priority mapping exists.. */
- VLAN_DEV_INFO(dev)->ingress_priority_map[vlan_prio & 0x7] = skb_prio;
- dev_put(dev);
- return 0;
- }
+ if (vlan->ingress_priority_map[vlan_prio & 0x7] && !skb_prio)
+ vlan->nr_ingress_mappings--;
+ else if (!vlan->ingress_priority_map[vlan_prio & 0x7] && skb_prio)
+ vlan->nr_ingress_mappings++;
- dev_put(dev);
- }
- return -EINVAL;
+ vlan->ingress_priority_map[vlan_prio & 0x7] = skb_prio;
}
-int vlan_dev_set_egress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+int vlan_dev_set_egress_priority(const struct net_device *dev,
+ u32 skb_prio, short vlan_prio)
{
- struct net_device *dev = dev_get_by_name(dev_name);
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
struct vlan_priority_tci_mapping *mp = NULL;
struct vlan_priority_tci_mapping *np;
-
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- /* See if a priority mapping exists.. */
- mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
- while (mp) {
- if (mp->priority == skb_prio) {
- mp->vlan_qos = ((vlan_prio << 13) & 0xE000);
- dev_put(dev);
- return 0;
- }
- mp = mp->next;
- }
-
- /* Create a new mapping then. */
- mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
- np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL);
- if (np) {
- np->next = mp;
- np->priority = skb_prio;
- np->vlan_qos = ((vlan_prio << 13) & 0xE000);
- VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF] = np;
- dev_put(dev);
- return 0;
- } else {
- dev_put(dev);
- return -ENOBUFS;
- }
- }
- dev_put(dev);
- }
- return -EINVAL;
-}
+ u32 vlan_qos = (vlan_prio << 13) & 0xE000;
-/* Flags are defined in the vlan_dev_info class in include/linux/if_vlan.h file. */
-int vlan_dev_set_vlan_flag(char *dev_name, __u32 flag, short flag_val)
-{
- struct net_device *dev = dev_get_by_name(dev_name);
-
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- /* verify flag is supported */
- if (flag == 1) {
- if (flag_val) {
- VLAN_DEV_INFO(dev)->flags |= 1;
- } else {
- VLAN_DEV_INFO(dev)->flags &= ~1;
- }
- dev_put(dev);
- return 0;
- } else {
- printk(KERN_ERR "%s: flag %i is not valid.\n",
- __FUNCTION__, (int)(flag));
- dev_put(dev);
- return -EINVAL;
- }
- } else {
- printk(KERN_ERR
- "%s: %s is not a vlan device, priv_flags: %hX.\n",
- __FUNCTION__, dev->name, dev->priv_flags);
- dev_put(dev);
+ /* See if a priority mapping exists.. */
+ mp = vlan->egress_priority_map[skb_prio & 0xF];
+ while (mp) {
+ if (mp->priority == skb_prio) {
+ if (mp->vlan_qos && !vlan_qos)
+ vlan->nr_egress_mappings--;
+ else if (!mp->vlan_qos && vlan_qos)
+ vlan->nr_egress_mappings++;
+ mp->vlan_qos = vlan_qos;
+ return 0;
}
- } else {
- printk(KERN_ERR "%s: Could not find device: %s\n",
- __FUNCTION__, dev_name);
+ mp = mp->next;
}
- return -EINVAL;
-}
-
-
-int vlan_dev_get_realdev_name(const char *dev_name, char* result)
-{
- struct net_device *dev = dev_get_by_name(dev_name);
- int rv = 0;
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23);
- rv = 0;
- } else {
- rv = -EINVAL;
- }
- dev_put(dev);
- } else {
- rv = -ENODEV;
- }
- return rv;
+ /* Create a new mapping then. */
+ mp = vlan->egress_priority_map[skb_prio & 0xF];
+ np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL);
+ if (!np)
+ return -ENOBUFS;
+
+ np->next = mp;
+ np->priority = skb_prio;
+ np->vlan_qos = vlan_qos;
+ vlan->egress_priority_map[skb_prio & 0xF] = np;
+ if (vlan_qos)
+ vlan->nr_egress_mappings++;
+ return 0;
}
-int vlan_dev_get_vid(const char *dev_name, unsigned short* result)
+/* Flags are defined in the vlan_flags enum in include/linux/if_vlan.h file. */
+int vlan_dev_set_vlan_flag(const struct net_device *dev,
+ u32 flag, short flag_val)
{
- struct net_device *dev = dev_get_by_name(dev_name);
- int rv = 0;
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- *result = VLAN_DEV_INFO(dev)->vlan_id;
- rv = 0;
+ /* verify flag is supported */
+ if (flag == VLAN_FLAG_REORDER_HDR) {
+ if (flag_val) {
+ VLAN_DEV_INFO(dev)->flags |= VLAN_FLAG_REORDER_HDR;
} else {
- rv = -EINVAL;
+ VLAN_DEV_INFO(dev)->flags &= ~VLAN_FLAG_REORDER_HDR;
}
- dev_put(dev);
- } else {
- rv = -ENODEV;
+ return 0;
}
- return rv;
+ printk(KERN_ERR "%s: flag %i is not valid.\n", __FUNCTION__, flag);
+ return -EINVAL;
}
-
-int vlan_dev_set_mac_address(struct net_device *dev, void *addr_struct_p)
+void vlan_dev_get_realdev_name(const struct net_device *dev, char *result)
{
- struct sockaddr *addr = (struct sockaddr *)(addr_struct_p);
- int i;
-
- if (netif_running(dev))
- return -EBUSY;
-
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
- printk("%s: Setting MAC address to ", dev->name);
- for (i = 0; i < 6; i++)
- printk(" %2.2x", dev->dev_addr[i]);
- printk(".\n");
-
- if (memcmp(VLAN_DEV_INFO(dev)->real_dev->dev_addr,
- dev->dev_addr,
- dev->addr_len) != 0) {
- if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_PROMISC)) {
- int flgs = VLAN_DEV_INFO(dev)->real_dev->flags;
-
- /* Increment our in-use promiscuity counter */
- dev_set_promiscuity(VLAN_DEV_INFO(dev)->real_dev, 1);
-
- /* Make PROMISC visible to the user. */
- flgs |= IFF_PROMISC;
- printk("VLAN (%s): Setting underlying device (%s) to promiscious mode.\n",
- dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
- dev_change_flags(VLAN_DEV_INFO(dev)->real_dev, flgs);
- }
- } else {
- printk("VLAN (%s): Underlying device (%s) has same MAC, not checking promiscious mode.\n",
- dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
- }
-
- return 0;
+ strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23);
}
-static inline int vlan_dmi_equals(struct dev_mc_list *dmi1,
- struct dev_mc_list *dmi2)
+void vlan_dev_get_vid(const struct net_device *dev, unsigned short *result)
{
- return ((dmi1->dmi_addrlen == dmi2->dmi_addrlen) &&
- (memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0));
+ *result = VLAN_DEV_INFO(dev)->vlan_id;
}
-/** dmi is a single entry into a dev_mc_list, a single node. mc_list is
- * an entire list, and we'll iterate through it.
- */
-static int vlan_should_add_mc(struct dev_mc_list *dmi, struct dev_mc_list *mc_list)
+int vlan_dev_open(struct net_device *dev)
{
- struct dev_mc_list *idmi;
-
- for (idmi = mc_list; idmi != NULL; ) {
- if (vlan_dmi_equals(dmi, idmi)) {
- if (dmi->dmi_users > idmi->dmi_users)
- return 1;
- else
- return 0;
- } else {
- idmi = idmi->next;
- }
- }
-
- return 1;
-}
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
+ struct net_device *real_dev = vlan->real_dev;
+ int err;
-static inline void vlan_destroy_mc_list(struct dev_mc_list *mc_list)
-{
- struct dev_mc_list *dmi = mc_list;
- struct dev_mc_list *next;
+ if (!(real_dev->flags & IFF_UP))
+ return -ENETDOWN;
- while(dmi) {
- next = dmi->next;
- kfree(dmi);
- dmi = next;
+ if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) {
+ err = dev_unicast_add(real_dev, dev->dev_addr, ETH_ALEN);
+ if (err < 0)
+ return err;
}
-}
+ memcpy(vlan->real_dev_addr, real_dev->dev_addr, ETH_ALEN);
-static void vlan_copy_mc_list(struct dev_mc_list *mc_list, struct vlan_dev_info *vlan_info)
-{
- struct dev_mc_list *dmi, *new_dmi;
+ if (dev->flags & IFF_ALLMULTI)
+ dev_set_allmulti(real_dev, 1);
+ if (dev->flags & IFF_PROMISC)
+ dev_set_promiscuity(real_dev, 1);
- vlan_destroy_mc_list(vlan_info->old_mc_list);
- vlan_info->old_mc_list = NULL;
-
- for (dmi = mc_list; dmi != NULL; dmi = dmi->next) {
- new_dmi = kmalloc(sizeof(*new_dmi), GFP_ATOMIC);
- if (new_dmi == NULL) {
- printk(KERN_ERR "vlan: cannot allocate memory. "
- "Multicast may not work properly from now.\n");
- return;
- }
-
- /* Copy whole structure, then make new 'next' pointer */
- *new_dmi = *dmi;
- new_dmi->next = vlan_info->old_mc_list;
- vlan_info->old_mc_list = new_dmi;
- }
+ return 0;
}
-static void vlan_flush_mc_list(struct net_device *dev)
+int vlan_dev_stop(struct net_device *dev)
{
- struct dev_mc_list *dmi = dev->mc_list;
-
- while (dmi) {
- printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from vlan interface\n",
- dev->name,
- dmi->dmi_addr[0],
- dmi->dmi_addr[1],
- dmi->dmi_addr[2],
- dmi->dmi_addr[3],
- dmi->dmi_addr[4],
- dmi->dmi_addr[5]);
- dev_mc_delete(dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
- dmi = dev->mc_list;
- }
+ struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
- /* dev->mc_list is NULL by the time we get here. */
- vlan_destroy_mc_list(VLAN_DEV_INFO(dev)->old_mc_list);
- VLAN_DEV_INFO(dev)->old_mc_list = NULL;
-}
+ dev_mc_unsync(real_dev, dev);
+ if (dev->flags & IFF_ALLMULTI)
+ dev_set_allmulti(real_dev, -1);
+ if (dev->flags & IFF_PROMISC)
+ dev_set_promiscuity(real_dev, -1);
-int vlan_dev_open(struct net_device *dev)
-{
- if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_UP))
- return -ENETDOWN;
+ if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
+ dev_unicast_delete(real_dev, dev->dev_addr, dev->addr_len);
return 0;
}
-int vlan_dev_stop(struct net_device *dev)
-{
- vlan_flush_mc_list(dev);
- return 0;
-}
-
int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
- if (real_dev->do_ioctl && netif_device_present(real_dev))
+ if (real_dev->do_ioctl && netif_device_present(real_dev))
err = real_dev->do_ioctl(real_dev, &ifrr, cmd);
break;
-
- case SIOCETHTOOL:
- err = dev_ethtool(&ifrr);
}
- if (!err)
+ if (!err)
ifr->ifr_ifru = ifrr.ifr_ifru;
return err;
}
-/** Taken from Gleb + Lennert's VLAN code, and modified... */
-void vlan_dev_set_multicast_list(struct net_device *vlan_dev)
+void vlan_change_rx_flags(struct net_device *dev, int change)
{
- struct dev_mc_list *dmi;
- struct net_device *real_dev;
- int inc;
-
- if (vlan_dev && (vlan_dev->priv_flags & IFF_802_1Q_VLAN)) {
- /* Then it's a real vlan device, as far as we can tell.. */
- real_dev = VLAN_DEV_INFO(vlan_dev)->real_dev;
-
- /* compare the current promiscuity to the last promisc we had.. */
- inc = vlan_dev->promiscuity - VLAN_DEV_INFO(vlan_dev)->old_promiscuity;
- if (inc) {
- printk(KERN_INFO "%s: dev_set_promiscuity(master, %d)\n",
- vlan_dev->name, inc);
- dev_set_promiscuity(real_dev, inc); /* found in dev.c */
- VLAN_DEV_INFO(vlan_dev)->old_promiscuity = vlan_dev->promiscuity;
- }
-
- inc = vlan_dev->allmulti - VLAN_DEV_INFO(vlan_dev)->old_allmulti;
- if (inc) {
- printk(KERN_INFO "%s: dev_set_allmulti(master, %d)\n",
- vlan_dev->name, inc);
- dev_set_allmulti(real_dev, inc); /* dev.c */
- VLAN_DEV_INFO(vlan_dev)->old_allmulti = vlan_dev->allmulti;
- }
-
- /* looking for addresses to add to master's list */
- for (dmi = vlan_dev->mc_list; dmi != NULL; dmi = dmi->next) {
- if (vlan_should_add_mc(dmi, VLAN_DEV_INFO(vlan_dev)->old_mc_list)) {
- dev_mc_add(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
- printk(KERN_DEBUG "%s: add %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address to master interface\n",
- vlan_dev->name,
- dmi->dmi_addr[0],
- dmi->dmi_addr[1],
- dmi->dmi_addr[2],
- dmi->dmi_addr[3],
- dmi->dmi_addr[4],
- dmi->dmi_addr[5]);
- }
- }
+ struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
- /* looking for addresses to delete from master's list */
- for (dmi = VLAN_DEV_INFO(vlan_dev)->old_mc_list; dmi != NULL; dmi = dmi->next) {
- if (vlan_should_add_mc(dmi, vlan_dev->mc_list)) {
- /* if we think we should add it to the new list, then we should really
- * delete it from the real list on the underlying device.
- */
- dev_mc_delete(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
- printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from master interface\n",
- vlan_dev->name,
- dmi->dmi_addr[0],
- dmi->dmi_addr[1],
- dmi->dmi_addr[2],
- dmi->dmi_addr[3],
- dmi->dmi_addr[4],
- dmi->dmi_addr[5]);
- }
- }
+ if (change & IFF_ALLMULTI)
+ dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
+ if (change & IFF_PROMISC)
+ dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
+}
- /* save multicast list */
- vlan_copy_mc_list(vlan_dev->mc_list, VLAN_DEV_INFO(vlan_dev));
- }
+/** Taken from Gleb + Lennert's VLAN code, and modified... */
+void vlan_dev_set_multicast_list(struct net_device *vlan_dev)
+{
+ dev_mc_sync(VLAN_DEV_INFO(vlan_dev)->real_dev, vlan_dev);
}
projects / linux-2.6-omap-h63xx.git / blobdiff