#
# Prompt user for primary drivers.
-config OSS_OBSOLETE
- bool "Obsolete OSS drivers"
- depends on SOUND_PRIME
- help
- This option enables support for obsolete OSS drivers that
- are scheduled for removal in the near future.
-
- Please contact Adrian Bunk <bunk@stusta.de> if you had to
- say Y here because your hardware is not properly supported
- by ALSA.
-
- If unsure, say N.
-
-config SOUND_BT878
- tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI && OSS_OBSOLETE
- ---help---
- Audio DMA support for bt878 based grabber boards. As you might have
- already noticed, bt878 is listed with two functions in /proc/pci.
- Function 0 does the video stuff (bt848 compatible), function 1 does
- the same for audio data. This is a driver for the audio part of
- the chip. If you say 'Y' here you get a oss-compatible dsp device
- where you can record from. If you want just watch TV you probably
- don't need this driver as most TV cards handle sound with a short
- cable from the TV card to your sound card's line-in.
-
- To compile this driver as a module, choose M here: the module will
- be called btaudio.
-
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
-config SOUND_ICH
- tristate "Intel ICH (i8xx) audio support"
- depends on SOUND_PRIME && PCI && OSS_OBSOLETE
- help
- Support for integral audio in Intel's I/O Controller Hub (ICH)
- chipset, as used on the 810/820/840 motherboards.
-
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
use its on-board A2 audio system.
-config SOUND_VRC5477
- tristate "NEC Vrc5477 AC97 sound"
- depends on SOUND_PRIME && DDB5477
- help
- Say Y here to enable sound support for the NEC Vrc5477 chip, an
- integrated, multi-function controller chip for MIPS CPUs. Works
- with the AC97 codec.
-
config SOUND_AU1550_AC97
tristate "Au1550/Au1200 AC97 Sound"
select SND_AC97_CODEC
This driver differs slightly from OSS/Free, so PLEASE READ the
- comments at the top of <file:drivers/sound/trident.c>.
+ comments at the top of <file:sound/oss/trident.c>.
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
and Pinnacle). Larger values reduce the chance of data overruns at
the expense of overall latency. If unsure, use the default.
-config SOUND_VIA82CXXX
- tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI && OSS_OBSOLETE
- help
- Say Y here to include support for the audio codec found on VIA
- 82Cxxx-based chips. Typically these are built into a motherboard.
-
- DO NOT select Sound Blaster or Adlib with this driver, unless
- you have a Sound Blaster or Adlib card in addition to your VIA
- audio chip.
-
-config MIDI_VIA82CXXX
- bool "VIA 82C686 MIDI"
- depends on SOUND_VIA82CXXX && ISA_DMA_API
- help
- Answer Y to use the MIDI interface of the Via686. You may need to
- enable this in the BIOS before it will work. This is for connection
- to external MIDI hardware, and is not required for software playback
- of MIDI files.
-
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME && ISA_DMA_API
+ depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
Say Y unless you have 16MB or more RAM or a PCI sound card.
-config SOUND_CS4232
- tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS && OSS_OBSOLETE
- help
- Say Y here if you have a card based on the Crystal CS4232 chip set,
- which uses its own Plug and Play protocol.
-
- If you compile the driver into the kernel, you have to add
- "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
- See <file:Documentation/sound/oss/CS4232> for more information on
- configuring this card.
-
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
depends on SOUND_OSS
+ depends on VIRT_TO_BUS
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
questions.
Read the <file:Documentation/sound/oss/README.OSS> file and the head of
- <file:drivers/sound/aedsp16.c> as well as
+ <file:sound/oss/aedsp16.c> as well as
<file:Documentation/sound/oss/AudioExcelDSP16> to get more information
about this driver and its configuration.
Say Y here to include support for the Rockwell WaveArtist sound
system. This driver is mainly for the NetWinder.
-config SOUND_TVMIXER
- tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME && I2C && VIDEO_V4L1 && OSS_OBSOLETE
- help
- Support for audio mixer facilities on the BT848 TV frame-grabber
- card.
-
config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
projects / linux-2.6-omap-h63xx.git / blobdiff