#
# Prompt user for primary drivers.
-config OBSOLETE_OSS
- bool "Obsolete OSS drivers"
- depends on SOUND_PRIME
- help
- This option enables support for obsolete OSS drivers that
- are scheduled for removal in the near future since there
- are ALSA drivers for the same hardware.
-
- Please contact Adrian Bunk <bunk@stusta.de> if you had to
- say Y here because your soundcard is not properly supported
- by ALSA.
-
- If unsure, say N.
-
-config SOUND_BT878
- tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI
- ---help---
- Audio DMA support for bt878 based grabber boards. As you might have
- already noticed, bt878 is listed with two functions in /proc/pci.
- Function 0 does the video stuff (bt848 compatible), function 1 does
- the same for audio data. This is a driver for the audio part of
- the chip. If you say 'Y' here you get a oss-compatible dsp device
- where you can record from. If you want just watch TV you probably
- don't need this driver as most TV cards handle sound with a short
- cable from the TV card to your sound card's line-in.
-
- To compile this driver as a module, choose M here: the module will
- be called btaudio.
-
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
-config SOUND_ES1371
- tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS
- help
- Say Y or M if you have a PCI sound card utilizing the Ensoniq
- ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
- your sound card uses an ES1371 without removing your computer's
- cover, use lspci -n and look for the PCI ID 1274:1371. Since
- Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
- models are either ES1370 or ES1371 based. This driver differs
- slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/es1371>.
-
-config SOUND_ICH
- tristate "Intel ICH (i8xx) audio support"
- depends on SOUND_PRIME && PCI
- help
- Support for integral audio in Intel's I/O Controller Hub (ICH)
- chipset, as used on the 810/820/840 motherboards.
-
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
use its on-board A2 audio system.
-config SOUND_VRC5477
- tristate "NEC Vrc5477 AC97 sound"
- depends on SOUND_PRIME && DDB5477
- help
- Say Y here to enable sound support for the NEC Vrc5477 chip, an
- integrated, multi-function controller chip for MIPS CPUs. Works
- with the AC97 codec.
-
config SOUND_AU1550_AC97
tristate "Au1550/Au1200 AC97 Sound"
select SND_AC97_CODEC
and Pinnacle). Larger values reduce the chance of data overruns at
the expense of overall latency. If unsure, use the default.
-config SOUND_VIA82CXXX
- tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI
- help
- Say Y here to include support for the audio codec found on VIA
- 82Cxxx-based chips. Typically these are built into a motherboard.
-
- DO NOT select Sound Blaster or Adlib with this driver, unless
- you have a Sound Blaster or Adlib card in addition to your VIA
- audio chip.
-
-config MIDI_VIA82CXXX
- bool "VIA 82C686 MIDI"
- depends on SOUND_VIA82CXXX && ISA_DMA_API
- help
- Answer Y to use the MIDI interface of the Via686. You may need to
- enable this in the BIOS before it will work. This is for connection
- to external MIDI hardware, and is not required for software playback
- of MIDI files.
-
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME && ISA_DMA_API
+ depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
Say Y unless you have 16MB or more RAM or a PCI sound card.
-config SOUND_CS4232
- tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS
- help
- Say Y here if you have a card based on the Crystal CS4232 chip set,
- which uses its own Plug and Play protocol.
-
- If you compile the driver into the kernel, you have to add
- "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
- See <file:Documentation/sound/oss/CS4232> for more information on
- configuring this card.
-
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
depends on SOUND_OSS
+ depends on VIRT_TO_BUS
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
Say Y here to include support for the Rockwell WaveArtist sound
system. This driver is mainly for the NetWinder.
-config SOUND_TVMIXER
- tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME && I2C && VIDEO_V4L1
- help
- Support for audio mixer facilities on the BT848 TV frame-grabber
- card.
-
config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
projects / linux-2.6-omap-h63xx.git / blobdiff