/*
* Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk>
* Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit
- * Version: 0.0.21
+ * Version: 0.0.22
*
* FEATURES currently supported:
* See ca0106_main.c for features.
* Added GPIO info for SB Live 24bit.
* 0.0.21
* Implement support for Line-in capture on SB Live 24bit.
+ * 0.0.22
+ * Add support for mute control on SB Live 24bit (cards w/ SPI DAC)
*
*
* This code was initally based on code from ALSA's emu10k1x.c which is:
#define SPCS_WORD_LENGTH_20A 0x0000000a /* Word Length 20 bit */
#define SPCS_WORD_LENGTH_20 0x00000009 /* Word Length 20 bit (both 0xa and 0x9 are 20 bit) */
#define SPCS_WORD_LENGTH_21 0x00000007 /* Word Length 21 bit */
-#define SPCS_WORD_LENGTH_21 0x00000007 /* Word Length 21 bit */
#define SPCS_WORD_LENGTH_22 0x00000005 /* Word Length 22 bit */
#define SPCS_WORD_LENGTH_23 0x00000003 /* Word Length 23 bit */
#define SPCS_WORD_LENGTH_24 0x0000000b /* Word Length 24 bit */
#define CONTROL_CENTER_LFE_CHANNEL 1
#define CONTROL_UNKNOWN_CHANNEL 2
+
+/* Based on WM8768 Datasheet Rev 4.2 page 32 */
+#define SPI_REG_MASK 0x1ff /* 16-bit SPI writes have a 7-bit address */
+#define SPI_REG_SHIFT 9 /* followed by 9 bits of data */
+
+#define SPI_LDA1_REG 0 /* digital attenuation */
+#define SPI_RDA1_REG 1
+#define SPI_LDA2_REG 4
+#define SPI_RDA2_REG 5
+#define SPI_LDA3_REG 6
+#define SPI_RDA3_REG 7
+#define SPI_LDA4_REG 13
+#define SPI_RDA4_REG 14
+#define SPI_MASTDA_REG 8
+
+#define SPI_DA_BIT_UPDATE (1<<8) /* update attenuation values */
+#define SPI_DA_BIT_0dB 0xff /* 0 dB */
+#define SPI_DA_BIT_infdB 0x00 /* inf dB attenuation (mute) */
+
+#define SPI_PL_REG 2
+#define SPI_PL_BIT_L_M (0<<5) /* left channel = mute */
+#define SPI_PL_BIT_L_L (1<<5) /* left channel = left */
+#define SPI_PL_BIT_L_R (2<<5) /* left channel = right */
+#define SPI_PL_BIT_L_C (3<<5) /* left channel = (L+R)/2 */
+#define SPI_PL_BIT_R_M (0<<7) /* right channel = mute */
+#define SPI_PL_BIT_R_L (1<<7) /* right channel = left */
+#define SPI_PL_BIT_R_R (2<<7) /* right channel = right */
+#define SPI_PL_BIT_R_C (3<<7) /* right channel = (L+R)/2 */
+#define SPI_IZD_REG 2
+#define SPI_IZD_BIT (1<<4) /* infinite zero detect */
+
+#define SPI_FMT_REG 3
+#define SPI_FMT_BIT_RJ (0<<0) /* right justified mode */
+#define SPI_FMT_BIT_LJ (1<<0) /* left justified mode */
+#define SPI_FMT_BIT_I2S (2<<0) /* I2S mode */
+#define SPI_FMT_BIT_DSP (3<<0) /* DSP Modes A or B */
+#define SPI_LRP_REG 3
+#define SPI_LRP_BIT (1<<2) /* invert LRCLK polarity */
+#define SPI_BCP_REG 3
+#define SPI_BCP_BIT (1<<3) /* invert BCLK polarity */
+#define SPI_IWL_REG 3
+#define SPI_IWL_BIT_16 (0<<4) /* 16-bit world length */
+#define SPI_IWL_BIT_20 (1<<4) /* 20-bit world length */
+#define SPI_IWL_BIT_24 (2<<4) /* 24-bit world length */
+#define SPI_IWL_BIT_32 (3<<4) /* 32-bit world length */
+
+#define SPI_MS_REG 10
+#define SPI_MS_BIT (1<<5) /* master mode */
+#define SPI_RATE_REG 10 /* only applies in master mode */
+#define SPI_RATE_BIT_128 (0<<6) /* MCLK = LRCLK * 128 */
+#define SPI_RATE_BIT_192 (1<<6)
+#define SPI_RATE_BIT_256 (2<<6)
+#define SPI_RATE_BIT_384 (3<<6)
+#define SPI_RATE_BIT_512 (4<<6)
+#define SPI_RATE_BIT_768 (5<<6)
+
+/* They really do label the bit for the 4th channel "4" and not "3" */
+#define SPI_DMUTE0_REG 9
+#define SPI_DMUTE1_REG 9
+#define SPI_DMUTE2_REG 9
+#define SPI_DMUTE4_REG 15
+#define SPI_DMUTE0_BIT (1<<3)
+#define SPI_DMUTE1_BIT (1<<4)
+#define SPI_DMUTE2_BIT (1<<5)
+#define SPI_DMUTE4_BIT (1<<2)
+
+#define SPI_PHASE0_REG 3
+#define SPI_PHASE1_REG 3
+#define SPI_PHASE2_REG 3
+#define SPI_PHASE4_REG 15
+#define SPI_PHASE0_BIT (1<<6)
+#define SPI_PHASE1_BIT (1<<7)
+#define SPI_PHASE2_BIT (1<<8)
+#define SPI_PHASE4_BIT (1<<3)
+
+#define SPI_PDWN_REG 2 /* power down all DACs */
+#define SPI_PDWN_BIT (1<<2)
+#define SPI_DACD0_REG 10 /* power down individual DACs */
+#define SPI_DACD1_REG 10
+#define SPI_DACD2_REG 10
+#define SPI_DACD4_REG 15
+#define SPI_DACD0_BIT (1<<1)
+#define SPI_DACD1_BIT (1<<2)
+#define SPI_DACD2_BIT (1<<3)
+#define SPI_DACD4_BIT (1<<0) /* datasheet error says it's 1 */
+
+#define SPI_PWRDNALL_REG 10 /* power down everything */
+#define SPI_PWRDNALL_BIT (1<<4)
+
#include "ca_midi.h"
struct snd_ca0106;
struct resource *res_port;
int irq;
- unsigned char revision; /* chip revision */
unsigned int serial; /* serial number */
unsigned short model; /* subsystem id */
struct snd_ca_midi midi;
struct snd_ca_midi midi2;
+
+ u16 spi_dac_reg[16];
};
int snd_ca0106_mixer(struct snd_ca0106 *emu);
int snd_ca0106_i2c_write(struct snd_ca0106 *emu, u32 reg, u32 value);
-
+int snd_ca0106_spi_write(struct snd_ca0106 * emu,
+ unsigned int data);
projects / linux-2.6-omap-h63xx.git / blobdiff