X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;ds=sidebyside;f=net%2Fmac80211%2Frc80211_pid_algo.c;h=a914ba73ccf56a3d828fa88a851dc44eebfd8fdb;hb=e1d7bf14999469b16e86889ac71c94a9d0d2f5f4;hp=a849b745bdb56b6f83b19a98e73f069f42341621;hpb=9a64388d83f6ef08dfff405a9d122e3dbcb6bf38;p=linux-2.6-omap-h63xx.git

diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index a849b745bdb..a914ba73ccf 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -237,8 +237,7 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo,
 }
 
 static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
-				       struct sk_buff *skb,
-				       struct ieee80211_tx_status *status)
+				       struct sk_buff *skb)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
@@ -248,6 +247,7 @@ static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
 	struct rc_pid_sta_info *spinfo;
 	unsigned long period;
 	struct ieee80211_supported_band *sband;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	rcu_read_lock();
 
@@ -259,35 +259,35 @@ static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
 
 	/* Don't update the state if we're not controlling the rate. */
 	sdata = sta->sdata;
-	if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
-		sta->txrate_idx = sdata->bss->max_ratectrl_rateidx;
+	if (sdata->force_unicast_rateidx > -1) {
+		sta->txrate_idx = sdata->max_ratectrl_rateidx;
 		goto unlock;
 	}
 
 	/* Ignore all frames that were sent with a different rate than the rate
 	 * we currently advise mac80211 to use. */
-	if (status->control.tx_rate != &sband->bitrates[sta->txrate_idx])
+	if (info->tx_rate_idx != sta->txrate_idx)
 		goto unlock;
 
 	spinfo = sta->rate_ctrl_priv;
 	spinfo->tx_num_xmit++;
 
 #ifdef CONFIG_MAC80211_DEBUGFS
-	rate_control_pid_event_tx_status(&spinfo->events, status);
+	rate_control_pid_event_tx_status(&spinfo->events, info);
 #endif
 
 	/* We count frames that totally failed to be transmitted as two bad
 	 * frames, those that made it out but had some retries as one good and
 	 * one bad frame. */
-	if (status->excessive_retries) {
+	if (info->status.excessive_retries) {
 		spinfo->tx_num_failed += 2;
 		spinfo->tx_num_xmit++;
-	} else if (status->retry_count) {
+	} else if (info->status.retry_count) {
 		spinfo->tx_num_failed++;
 		spinfo->tx_num_xmit++;
 	}
 
-	if (status->excessive_retries) {
+	if (info->status.excessive_retries) {
 		sta->tx_retry_failed++;
 		sta->tx_num_consecutive_failures++;
 		sta->tx_num_mpdu_fail++;
@@ -295,8 +295,8 @@ static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
 		sta->tx_num_consecutive_failures = 0;
 		sta->tx_num_mpdu_ok++;
 	}
-	sta->tx_retry_count += status->retry_count;
-	sta->tx_num_mpdu_fail += status->retry_count;
+	sta->tx_retry_count += info->status.retry_count;
+	sta->tx_num_mpdu_fail += info->status.retry_count;
 
 	/* Update PID controller state. */
 	period = (HZ * pinfo->sampling_period + 500) / 1000;
@@ -330,15 +330,15 @@ static void rate_control_pid_get_rate(void *priv, struct net_device *dev,
 	fc = le16_to_cpu(hdr->frame_control);
 	if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
 	    is_multicast_ether_addr(hdr->addr1) || !sta) {
-		sel->rate = rate_lowest(local, sband, sta);
+		sel->rate_idx = rate_lowest_index(local, sband, sta);
 		rcu_read_unlock();
 		return;
 	}
 
 	/* If a forced rate is in effect, select it. */
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	if (sdata->bss && sdata->bss->force_unicast_rateidx > -1)
-		sta->txrate_idx = sdata->bss->force_unicast_rateidx;
+	if (sdata->force_unicast_rateidx > -1)
+		sta->txrate_idx = sdata->force_unicast_rateidx;
 
 	rateidx = sta->txrate_idx;
 
@@ -349,7 +349,7 @@ static void rate_control_pid_get_rate(void *priv, struct net_device *dev,
 
 	rcu_read_unlock();
 
-	sel->rate = &sband->bitrates[rateidx];
+	sel->rate_idx = rateidx;
 
 #ifdef CONFIG_MAC80211_DEBUGFS
 	rate_control_pid_event_tx_rate(
@@ -398,13 +398,25 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local)
 		return NULL;
 	}
 
+	pinfo->target = RC_PID_TARGET_PF;
+	pinfo->sampling_period = RC_PID_INTERVAL;
+	pinfo->coeff_p = RC_PID_COEFF_P;
+	pinfo->coeff_i = RC_PID_COEFF_I;
+	pinfo->coeff_d = RC_PID_COEFF_D;
+	pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
+	pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
+	pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
+	pinfo->norm_offset = RC_PID_NORM_OFFSET;
+	pinfo->rinfo = rinfo;
+	pinfo->oldrate = 0;
+
 	/* Sort the rates. This is optimized for the most common case (i.e.
 	 * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
 	 * mapping too. */
 	for (i = 0; i < sband->n_bitrates; i++) {
 		rinfo[i].index = i;
 		rinfo[i].rev_index = i;
-		if (pinfo->fast_start)
+		if (RC_PID_FAST_START)
 			rinfo[i].diff = 0;
 		else
 			rinfo[i].diff = i * pinfo->norm_offset;
@@ -425,19 +437,6 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local)
 			break;
 	}
 
-	pinfo->target = RC_PID_TARGET_PF;
-	pinfo->sampling_period = RC_PID_INTERVAL;
-	pinfo->coeff_p = RC_PID_COEFF_P;
-	pinfo->coeff_i = RC_PID_COEFF_I;
-	pinfo->coeff_d = RC_PID_COEFF_D;
-	pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
-	pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
-	pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
-	pinfo->norm_offset = RC_PID_NORM_OFFSET;
-	pinfo->fast_start = RC_PID_FAST_START;
-	pinfo->rinfo = rinfo;
-	pinfo->oldrate = 0;
-
 #ifdef CONFIG_MAC80211_DEBUGFS
 	de = &pinfo->dentries;
 	de->dir = debugfs_create_dir("rc80211_pid",
@@ -465,9 +464,6 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local)
 	de->norm_offset = debugfs_create_u32("norm_offset",
 					     S_IRUSR | S_IWUSR, de->dir,
 					     &pinfo->norm_offset);
-	de->fast_start = debugfs_create_bool("fast_start",
-					     S_IRUSR | S_IWUSR, de->dir,
-					     &pinfo->fast_start);
 #endif
 
 	return pinfo;
@@ -479,7 +475,6 @@ static void rate_control_pid_free(void *priv)
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct rc_pid_debugfs_entries *de = &pinfo->dentries;
 
-	debugfs_remove(de->fast_start);
 	debugfs_remove(de->norm_offset);
 	debugfs_remove(de->sharpen_duration);
 	debugfs_remove(de->sharpen_factor);
@@ -540,11 +535,6 @@ static struct rate_control_ops mac80211_rcpid = {
 #endif
 };
 
-MODULE_DESCRIPTION("PID controller based rate control algorithm");
-MODULE_AUTHOR("Stefano Brivio");
-MODULE_AUTHOR("Mattias Nissler");
-MODULE_LICENSE("GPL");
-
 int __init rc80211_pid_init(void)
 {
 	return ieee80211_rate_control_register(&mac80211_rcpid);
@@ -554,8 +544,3 @@ void rc80211_pid_exit(void)
 {
 	ieee80211_rate_control_unregister(&mac80211_rcpid);
 }
-
-#ifdef CONFIG_MAC80211_RC_PID_MODULE
-module_init(rc80211_pid_init);
-module_exit(rc80211_pid_exit);
-#endif