X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=Documentation%2FIPMI.txt;h=0e3924ecd76b4e9b197348d656712fee80a2691d;hb=699ddda6ecd5751fd05fd5128aa7f93438974468;hp=9f08d73d90bf12251770e0d22bd8cd1a2c18a70e;hpb=6ebfc0e20b409f13e62bbb84ce70102b49945cfd;p=linux-2.6-omap-h63xx.git

diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 9f08d73d90b..0e3924ecd76 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -468,12 +468,12 @@ BMCs specified on the smb_addr line will be detected.
 Setting smb_dbg_probe to 1 will enable debugging of the probing and
 detection process for BMCs on the SMBusses.
 
-Discovering the IPMI compilant BMC on the SMBus can cause devices
+Discovering the IPMI compliant BMC on the SMBus can cause devices
 on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI
 message as a block write to the I2C bus and waits for a response.
 This action can be detrimental to some I2C devices. It is highly recommended
 that the known I2c address be given to the SMBus driver in the smb_addr
-parameter. The default adrress range will not be used when a smb_addr
+parameter. The default address range will not be used when a smb_addr
 parameter is provided.
 
 When compiled into the kernel, the addresses can be specified on the