X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=Documentation%2Fusb%2Ferror-codes.txt;h=9cf83e8c27b8f94208d7ad0ebc4587d82430164d;hb=e339ad31f59925b48a92ee3947692fdf9758b8c7;hp=39c68f8c4e6c7cd8969fa1f0ae03a1afd1bcc424;hpb=38e2bfc94e95dd6005fdaf40dfec0157396741da;p=linux-2.6-omap-h63xx.git

diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 39c68f8c4e6..9cf83e8c27b 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -126,7 +126,7 @@ one or more packets could finish before an error stops further endpoint I/O.
 			urb->transfer_flags.
 
 -ENODEV			Device was removed.  Often preceded by a burst of
-			other errors, since the hub driver does't detect
+			other errors, since the hub driver doesn't detect
 			device removal events immediately.
 
 -EXDEV			ISO transfer only partially completed
@@ -145,7 +145,7 @@ one or more packets could finish before an error stops further endpoint I/O.
 hardware problems such as bad devices (including firmware) or cables.
 
 (**) This is also one of several codes that different kinds of host
-controller use to to indicate a transfer has failed because of device
+controller use to indicate a transfer has failed because of device
 disconnect.  In the interval before the hub driver starts disconnect
 processing, devices may receive such fault reports for every request.