X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap2%2Fboard-overo.c;h=f357de9681c7308d43af80837f70c2c608a108e7;hb=ed2a95f3ce60fe24fea59633d19e8f6d993ec4ea;hp=f9cc015d36d869b3c84f3a46a6cbeaaffff216dc;hpb=24449b49ec00d239c737dd93e76b198d5c0f9312;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f9cc015d36d..f357de9681c 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -63,6 +63,65 @@
 #define OVERO_SMSC911X_CS	5
 #define OVERO_SMSC911X_GPIO	176
 
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#include <mach/mcspi.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OVERO_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+static void __init overo_ads7846_init(void)
+{
+	if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+	    (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
+		gpio_export(OVERO_GPIO_PENDOWN, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+		return;
+	}
+
+	spi_register_board_info(overo_spi_board_info,
+			ARRAY_SIZE(overo_spi_board_info));
+}
+
+#else
+static inline void __init overo_ads7846_init(void) { return; }
+#endif
+
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
 #include <linux/smsc911x.h>
@@ -124,65 +183,7 @@ static inline void __init overo_init_smsc911x(void)
 static inline void __init overo_init_smsc911x(void) { return; }
 #endif
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-#include <mach/mcspi.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
-	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
-};
-
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(OVERO_GPIO_PENDOWN);
-}
 
-static struct ads7846_platform_data ads7846_config = {
-	.x_max			= 0x0fff,
-	.y_max			= 0x0fff,
-	.x_plate_ohms		= 180,
-	.pressure_max		= 255,
-	.debounce_max		= 10,
-	.debounce_tol		= 3,
-	.debounce_rep		= 1,
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info overo_spi_board_info[] __initdata = {
-	{
-		.modalias		= "ads7846",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 1500000,
-		.controller_data	= &ads7846_mcspi_config,
-		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
-		.platform_data		= &ads7846_config,
-	}
-};
-
-static void __init overo_ads7846_init(void)
-{
-	if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
-	    (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
-		gpio_export(OVERO_GPIO_PENDOWN, 0);
-	} else {
-		printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
-		return;
-	}
-
-	spi_register_board_info(overo_spi_board_info,
-			ARRAY_SIZE(overo_spi_board_info));
-}
-
-#else
-static inline void __init overo_ads7846_init(void) { return; }
-#endif
 
 static struct mtd_partition overo_nand_partitions[] = {
 	{
@@ -398,6 +399,7 @@ static void __init overo_init(void)
 	overo_flash_init();
 	overo_init_smsc911x();
 	overo_ads7846_init();
+	overo_init_smsc911x();
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&