X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=arch%2Farm%2Fmach-sa1100%2Ftime.c;h=fdf7b016e7adeadfa5652ae9779803209eba3d91;hb=6d6a54d1e4c2c6fbccd128ab4e6c8817db124866;hp=416e277054c23958b286dfb674a24024b28a46b4;hpb=60c9b2746f589b0b809582b0471cf30ad3ae439f;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 416e277054c..fdf7b016e7a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -21,25 +21,6 @@
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM            0
 
-static unsigned long __init sa1100_get_rtc_time(void)
-{
-	/*
-	 * According to the manual we should be able to let RTTR be zero
-	 * and then a default diviser for a 32.768KHz clock is used.
-	 * Apparently this doesn't work, at least for my SA1110 rev 5.
-	 * If the clock divider is uninitialized then reset it to the
-	 * default value to get the 1Hz clock.
-	 */
-	if (RTTR == 0) {
-		RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
-		printk(KERN_WARNING "Warning: uninitialized Real Time Clock\n");
-		/* The current RTC value probably doesn't make sense either */
-		RCNR = 0;
-		return 0;
-	}
-	return RCNR;
-}
-
 static int sa1100_set_rtc(void)
 {
 	unsigned long current_time = xtime.tv_sec;
@@ -117,15 +98,10 @@ static struct irqaction sa1100_timer_irq = {
 
 static void __init sa1100_timer_init(void)
 {
-	struct timespec tv;
 	unsigned long flags;
 
 	set_rtc = sa1100_set_rtc;
 
-	tv.tv_nsec = 0;
-	tv.tv_sec = sa1100_get_rtc_time();
-	do_settimeofday(&tv);
-
 	OIER = 0;		/* disable any timer interrupts */
 	OSSR = 0xf;		/* clear status on all timers */
 	setup_irq(IRQ_OST0, &sa1100_timer_irq);