X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=arch%2Fblackfin%2Fmach-bf533%2Fboards%2Fcm_bf533.c;h=e8974878d8c2807dc34bb2baa4b5822959558a5c;hb=12e87e36e0141c08dbc8b2177c93c75fb18ad7e5;hp=575843f6d9ef37c1c144213a2bcc033af368f021;hpb=616ad8c44281c0c6711a72b560e01ec335ff27e0;p=linux-2.6-omap-h63xx.git

diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 575843f6d9e..e8974878d8c 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
@@ -219,6 +209,19 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
@@ -237,23 +240,33 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
 #ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
 	{
 		.start = 0xFFC00400,
 		.end = 0xFFC004FF,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir0_device = {
 	.name = "bfin_sir",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir_resources),
-	.resource = bfin_sir_resources,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
 };
 #endif
+#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -342,7 +355,9 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-	&bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -365,6 +380,8 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
+
+	&bfin_gpios_device,
 };
 
 static int __init cm_bf533_init(void)