X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=arch%2Fmips%2FKconfig;h=cd5fbf6f07848c3c9778aae1e8be265a92f426c4;hb=4c7145a1ec1bb789d5f07e47510e8bda546a7c4a;hp=49896a2a1d722e0760a866487f8b80b7d8af8fb0;hpb=bcbc713470283bc82d043fd23b02e41a9eb8dee5;p=linux-2.6-omap-h63xx.git

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 49896a2a1d7..cd5fbf6f078 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -211,6 +211,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
@@ -567,7 +568,7 @@ config MIKROTIK_RB532
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SWAP_IO_SPACE
 	select BOOT_RAW
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support the Mikrotik(tm) RouterBoard 532 series,
 	  based on the IDT RC32434 SoC.
@@ -597,7 +598,7 @@ config WR_PPMC
 
 endchoice
 
-source "arch/mips/au1000/Kconfig"
+source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
@@ -609,11 +610,6 @@ source "arch/mips/vr41xx/Kconfig"
 
 endmenu
 
-config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -1272,6 +1268,13 @@ config CPU_SUPPORTS_32BIT_KERNEL
 config CPU_SUPPORTS_64BIT_KERNEL
 	bool
 
+#
+# Set to y for ptrace access to watch registers.
+#
+config HARDWARE_WATCHPOINTS
+       bool
+       default y if CPU_MIPS32 || CPU_MIPS64
+
 menu "Kernel type"
 
 choice
@@ -1403,7 +1406,6 @@ config MIPS_MT_SMTC
 	depends on CPU_MIPS32_R2
 	#depends on CPU_MIPS64_R2		# once there is hardware ...
 	depends on SYS_SUPPORTS_MULTITHREADING
-	select GENERIC_CLOCKEVENTS_BROADCAST
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -1451,32 +1453,17 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.
 
-config MIPS_MT_SMTC_INSTANT_REPLAY
-	bool "Low-latency Dispatch of Deferred SMTC IPIs"
-	depends on MIPS_MT_SMTC && !PREEMPT
-	default y
-	help
-	  SMTC pseudo-interrupts between TCs are deferred and queued
-	  if the target TC is interrupt-inhibited (IXMT). In the first
-	  SMTC prototypes, these queued IPIs were serviced on return
-	  to user mode, or on entry into the kernel idle loop. The
-	  INSTANT_REPLAY option dispatches them as part of local_irq_restore()
-	  processing, which adds runtime overhead (hence the option to turn
-	  it off), but ensures that IPIs are handled promptly even under
-	  heavy I/O interrupt load.
-
 config MIPS_MT_SMTC_IM_BACKSTOP
 	bool "Use per-TC register bits as backstop for inhibited IM bits"
 	depends on MIPS_MT_SMTC
-	default y
+	default n
 	help
 	  To support multiple TC microthreads acting as "CPUs" within
 	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
 	  during interrupt handling. To support legacy drivers and interrupt
 	  controller management code, SMTC has a "backstop" to track and
 	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead. Disable it only if you know
-	  what you are doing.
+	  impact on interrupt service overhead.
 
 config MIPS_MT_SMTC_IRQAFF
 	bool "Support IRQ affinity API"
@@ -1486,10 +1473,8 @@ config MIPS_MT_SMTC_IRQAFF
 	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
 	  for SMTC Linux kernel. Requires platform support, of which
 	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
-	  be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
-	  interrupt dispatch, and should be used only if you know what
-	  you are doing.
+	  platform code.  Adds some overhead to interrupt dispatch, and
+	  should be used only if you know what you are doing.
 
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
@@ -1517,6 +1502,18 @@ config MIPS_APSP_KSPD
 	  "exit" syscall notifying other kernel modules the SP program is
 	  exiting.  You probably want to say yes here.
 
+config MIPS_CMP
+	bool "MIPS CMP framework support"
+	depends on SYS_SUPPORTS_MIPS_CMP
+	select SYNC_R4K if BROKEN
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_SCHED_SMT if SMP
+	select WEAK_ORDERING
+	default n
+	help
+	  This is a placeholder option for the GCMP work. It will need to
+	  be handled differently...
+
 config SB1_PASS_1_WORKAROUNDS
 	bool
 	depends on CPU_SB1_PASS_1
@@ -1693,6 +1690,9 @@ config SMP
 config SMP_UP
 	bool
 
+config SYS_SUPPORTS_MIPS_CMP
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 
@@ -1740,17 +1740,6 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
-config MIPS_CMP
-	bool "MIPS CMP framework support"
-	depends on SMP
-	select SYNC_R4K
-	select SYS_SUPPORTS_SCHED_SMT
-	select WEAK_ORDERING
-	default n
-	help
-	  This is a placeholder option for the GCMP work. It will need to
-	  be handled differently...
-
 source "kernel/time/Kconfig"
 
 #