X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fata%2Fata_generic.c;h=90329982bef760fe6a4cadead1f1d526943f4958;hb=417a1a6d3d7abad4c5288135f640e6e38e7a65c5;hp=92a491ddd03055555c2926ecf16f23c6a4526749;hpb=d29182534c5f39ff899763d1e0982d8f33791d6f;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 92a491ddd03..90329982bef 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.2.13"
 
 /*
  *	A generic parallel ATA driver using libata
@@ -34,7 +34,7 @@
 
 /**
  *	generic_set_mode	-	mode setting
- *	@ap: interface to set up
+ *	@link: link to set up
  *	@unused: returned device on error
  *
  *	Use a non standard set_mode function. We don't want to be tuned.
@@ -43,24 +43,24 @@
  *	and respect them.
  */
 
-static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 {
+	struct ata_port *ap = link->ap;
 	int dma_enabled = 0;
-	int i;
+	struct ata_device *dev;
 
 	/* Bits 5 and 6 indicate if DMA is active on master/slave */
 	if (ap->ioaddr.bmdma_addr)
-		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 
-	for (i = 0; i < ATA_MAX_DEVICES; i++) {
-		struct ata_device *dev = &ap->device[i];
-		if (ata_dev_ready(dev)) {
+	ata_link_for_each_dev(dev, link) {
+		if (ata_dev_enabled(dev)) {
 			/* We don't really care */
 			dev->pio_mode = XFER_PIO_0;
 			dev->dma_mode = XFER_MW_DMA_0;
 			/* We do need the right mode information for DMA or PIO
 			   and this comes from the current configuration flags */
-			if (dma_enabled & (1 << (5 + i))) {
+			if (dma_enabled & (1 << (5 + dev->devno))) {
 				ata_id_to_dma_mode(dev, XFER_MW_DMA_0);
 				dev->flags &= ~ATA_DFLAG_PIO;
 			} else {
@@ -90,16 +90,11 @@ static struct scsi_host_template generic_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations generic_port_ops = {
 	.set_mode	= generic_set_mode,
 
-	.port_disable	= ata_port_disable,
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
 	.check_status 	= ata_check_status,
@@ -125,9 +120,8 @@ static struct ata_port_operations generic_port_ops = {
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
-	.irq_ack	= ata_irq_ack,
 
-	.port_start	= ata_port_start,
+	.port_start	= ata_sff_port_start,
 };
 
 static int all_generic_ide;		/* Set to claim all devices */
@@ -145,15 +139,15 @@ static int all_generic_ide;		/* Set to claim all devices */
 static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	u16 command;
-	static struct ata_port_info info = {
+	static const struct ata_port_info info = {
 		.sht = &generic_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &generic_port_ops
 	};
-	static struct ata_port_info *port_info[2] = { &info, &info };
+	const struct ata_port_info *ppi[] = { &info, NULL };
 
 	/* Don't use the generic entry unless instructed to do so */
 	if (id->driver_data == 1 && all_generic_ide == 0)
@@ -179,7 +173,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	if (dev->vendor == PCI_VENDOR_ID_AL)
 	    	ata_pci_clear_simplex(dev);
 
-	return ata_pci_init_one(dev, port_info, 2);
+	return ata_pci_init_one(dev, ppi);
 }
 
 static struct pci_device_id ata_generic[] = {