X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_cs5530.c;h=68f150a1e2f480b42d42ca88895563ba6a91fa16;hb=bac27d35cbbf7c641efcc75b5330df8717d6db65;hp=29642d5ee1891ee3d3aef8e40d51008f986b2fbc;hpb=d6454706c382ab74e2ecad7803c434cc6bd30343;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 29642d5ee18..68f150a1e2f 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"pata_cs5530"
-#define DRV_VERSION	"0.7.2"
+#define DRV_VERSION	"0.7.3"
 
 static void __iomem *cs5530_port_base(struct ata_port *ap)
 {
@@ -167,7 +167,7 @@ static struct scsi_host_template cs5530_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
+	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
@@ -176,10 +176,6 @@ static struct scsi_host_template cs5530_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations cs5530_port_ops = {
@@ -205,7 +201,7 @@ static struct ata_port_operations cs5530_port_ops = {
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.cable_detect	= ata_cable_40wire,
 
-	.qc_prep 	= ata_qc_prep,
+	.qc_prep 	= ata_dumb_qc_prep,
 	.qc_issue	= cs5530_qc_issue_prot,
 
 	.data_xfer	= ata_data_xfer,
@@ -270,7 +266,7 @@ static int cs5530_init_chip(void)
 	}
 
 	pci_set_master(cs5530_0);
-	pci_set_mwi(cs5530_0);
+	pci_try_set_mwi(cs5530_0);
 
 	/*
 	 * Set PCI CacheLineSize to 16-bytes:
@@ -339,32 +335,32 @@ fail_put:
 
 static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	static struct ata_port_info info = {
+	static const struct ata_port_info info = {
 		.sht = &cs5530_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x07,
 		.port_ops = &cs5530_port_ops
 	};
 	/* The docking connector doesn't do UDMA, and it seems not MWDMA */
-	static struct ata_port_info info_palmax_secondary = {
+	static const struct ata_port_info info_palmax_secondary = {
 		.sht = &cs5530_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &cs5530_port_ops
 	};
-	static struct ata_port_info *port_info[2] = { &info, &info };
+	const struct ata_port_info *ppi[] = { &info, NULL };
 
 	/* Chip initialisation */
 	if (cs5530_init_chip())
 		return -ENODEV;
 
 	if (cs5530_is_palmax())
-		port_info[1] = &info_palmax_secondary;
+		ppi[1] = &info_palmax_secondary;
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(pdev, port_info, 2);
+	return ata_pci_init_one(pdev, ppi);
 }
 
 #ifdef CONFIG_PM