X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_cypress.c;h=f69dde5f70665a37e2a019a23f7563177f1cbabf;hb=0a14fe6e5efd0af0f9c6c01e0433445d615d0110;hp=247b43608b14e0fb8fc26447a54fd1d2f57cfdea;hpb=7ff3e52cf2947ebd38c84159af68e5a29d228f6c;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 247b43608b1..f69dde5f706 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -18,7 +18,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cypress"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "0.1.4"
 
 /* here are the offset definitions for the registers */
 
@@ -128,14 +128,18 @@ static struct scsi_host_template cy82c693_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
@@ -163,14 +167,14 @@ static struct ata_port_operations cy82c693_port_ops = {
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
-	.data_xfer	= ata_pio_data_xfer,
+	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
 
 	.port_start	= ata_port_start,
-	.port_stop	= ata_port_stop,
-	.host_stop	= ata_host_stop
 };
 
 static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -203,7 +207,11 @@ static struct pci_driver cy82c693_pci_driver = {
 	.name 		= DRV_NAME,
 	.id_table	= cy82c693,
 	.probe 		= cy82c693_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
+#endif
 };
 
 static int __init cy82c693_init(void)