X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_netcell.c;h=40eb574828bf759b1b8a103c8431305819197e2e;hb=46b2835771ad8ef19b8e081e8c90439408c7645f;hp=38f99b38a5ea97a861e1a8cb2d1d27f324ea38cc;hpb=5cb69bcacea70024252138a9cb4229a142a93389;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 38f99b38a5e..40eb574828b 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -16,33 +16,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_netcell"
-#define DRV_VERSION	"0.1.6"
-
-/**
- *	netcell_probe_init	-	check for 40/80 pin
- *	@ap: Port
- *
- *	Cables are handled by the RAID controller. Report 80 pin.
- */
-
-static int netcell_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	netcell_probe_reset - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void netcell_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION	"0.1.7"
 
 /* No PIO or DMA methods needed for this device */
 
@@ -63,10 +37,6 @@ static struct scsi_host_template netcell_sht = {
 	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations netcell_ops = {
@@ -81,8 +51,9 @@ static const struct ata_port_operations netcell_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= netcell_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_80wire,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,
@@ -121,17 +92,17 @@ static const struct ata_port_operations netcell_ops = {
 static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	static struct ata_port_info info = {
+	static const struct ata_port_info info = {
 		.sht		= &netcell_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		/* Actually we don't really care about these as the
 		   firmware deals with it */
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask 	= 0x3f, /* UDMA 133 */
+		.udma_mask 	= ATA_UDMA5, /* UDMA 133 */
 		.port_ops	= &netcell_ops,
 	};
-	static struct ata_port_info *port_info[2] = { &info, &info };
+	const struct ata_port_info *port_info[] = { &info, NULL };
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
@@ -141,7 +112,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	ata_pci_clear_simplex(pdev);
 
 	/* And let the library code do the work */
-	return ata_pci_init_one(pdev, port_info, 2);
+	return ata_pci_init_one(pdev, port_info);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {