X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fchar%2Fsynclink_gt.c;h=509c89ac5bd3292d5ac2a3f9da77902cc2a28280;hb=a7ef6a40f700496c60b8f7206fff74fecd67b3a2;hp=2c3e43bb2cc933184ea94cc6abd04a1b82c6b312;hpb=8725f25acc656c1522d48a6746055099efdaca4c;p=linux-2.6-omap-h63xx.git diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 2c3e43bb2cc..509c89ac5bd 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -128,17 +128,14 @@ static int slgt_device_count; static int ttymajor; static int debug_level; static int maxframe[MAX_DEVICES]; -static int dosyncppp[MAX_DEVICES]; module_param(ttymajor, int, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); -MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable"); /* * tty support and callbacks @@ -165,7 +162,7 @@ static int read_proc(char *page, char **start, off_t off, int count,int *eof, v static int chars_in_buffer(struct tty_struct *tty); static void throttle(struct tty_struct * tty); static void unthrottle(struct tty_struct * tty); -static void set_break(struct tty_struct *tty, int break_state); +static int set_break(struct tty_struct *tty, int break_state); /* * generic HDLC support and callbacks @@ -214,6 +211,7 @@ struct slgt_desc char *buf; /* virtual address of data buffer */ unsigned int pdesc; /* physical address of this descriptor */ dma_addr_t buf_dma_addr; + unsigned short buf_count; }; #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) @@ -302,7 +300,7 @@ struct slgt_info { u32 idle_mode; u32 max_frame_size; /* as set by device config */ - unsigned int raw_rx_size; + unsigned int rbuf_fill_level; unsigned int if_mode; /* device status */ @@ -348,7 +346,6 @@ struct slgt_info { /* SPPP/Cisco HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC struct net_device *netdev; @@ -466,6 +463,7 @@ static void tx_start(struct slgt_info *info); static void tx_stop(struct slgt_info *info); static void tx_set_idle(struct slgt_info *info); static unsigned int free_tbuf_count(struct slgt_info *info); +static unsigned int tbuf_bytes(struct slgt_info *info); static void reset_tbufs(struct slgt_info *info); static void tdma_reset(struct slgt_info *info); static void tdma_start(struct slgt_info *info); @@ -513,7 +511,7 @@ static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); static int tiocmget(struct tty_struct *tty, struct file *file); static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static void set_break(struct tty_struct *tty, int break_state); +static int set_break(struct tty_struct *tty, int break_state); static int get_interface(struct slgt_info *info, int __user *if_mode); static int set_interface(struct slgt_info *info, int if_mode); static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); @@ -849,6 +847,7 @@ static int write(struct tty_struct *tty, int ret = 0; struct slgt_info *info = tty->driver_data; unsigned long flags; + unsigned int bufs_needed; if (sanity_check(info, tty->name, "write")) goto cleanup; @@ -865,25 +864,16 @@ static int write(struct tty_struct *tty, if (!count) goto cleanup; - if (info->params.mode == MGSL_MODE_RAW || - info->params.mode == MGSL_MODE_MONOSYNC || - info->params.mode == MGSL_MODE_BISYNC) { - unsigned int bufs_needed = (count/DMABUFSIZE); - unsigned int bufs_free = free_tbuf_count(info); - if (count % DMABUFSIZE) - ++bufs_needed; - if (bufs_needed > bufs_free) - goto cleanup; - } else { - if (info->tx_active) - goto cleanup; - if (info->tx_count) { - /* send accumulated data from send_char() calls */ - /* as frame and wait before accepting more data. */ - tx_load(info, info->tx_buf, info->tx_count); - goto start; - } + if (!info->tx_active && info->tx_count) { + /* send accumulated data from send_char() */ + tx_load(info, info->tx_buf, info->tx_count); + goto start; } + bufs_needed = (count/DMABUFSIZE); + if (count % DMABUFSIZE) + ++bufs_needed; + if (bufs_needed > free_tbuf_count(info)) + goto cleanup; ret = info->tx_count = count; tx_load(info, buf, count); @@ -1396,10 +1386,12 @@ done: static int chars_in_buffer(struct tty_struct *tty) { struct slgt_info *info = tty->driver_data; + int count; if (sanity_check(info, tty->name, "chars_in_buffer")) return 0; - DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count)); - return info->tx_count; + count = tbuf_bytes(info); + DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count)); + return count; } /* @@ -1452,14 +1444,14 @@ static void unthrottle(struct tty_struct * tty) * set or clear transmit break condition * break_state -1=set break condition, 0=clear */ -static void set_break(struct tty_struct *tty, int break_state) +static int set_break(struct tty_struct *tty, int break_state) { struct slgt_info *info = tty->driver_data; unsigned short value; unsigned long flags; if (sanity_check(info, tty->name, "set_break")) - return; + return -EINVAL; DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); spin_lock_irqsave(&info->lock,flags); @@ -1470,6 +1462,7 @@ static void set_break(struct tty_struct *tty, int break_state) value &= ~BIT6; wr_reg16(info, TCR, value); spin_unlock_irqrestore(&info->lock,flags); + return 0; } #if SYNCLINK_GENERIC_HDLC @@ -2679,8 +2672,31 @@ static int tx_abort(struct slgt_info *info) static int rx_enable(struct slgt_info *info, int enable) { unsigned long flags; - DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable)); + unsigned int rbuf_fill_level; + DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable)); spin_lock_irqsave(&info->lock,flags); + /* + * enable[31..16] = receive DMA buffer fill level + * 0 = noop (leave fill level unchanged) + * fill level must be multiple of 4 and <= buffer size + */ + rbuf_fill_level = ((unsigned int)enable) >> 16; + if (rbuf_fill_level) { + if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) { + spin_unlock_irqrestore(&info->lock, flags); + return -EINVAL; + } + info->rbuf_fill_level = rbuf_fill_level; + rx_stop(info); /* restart receiver to use new fill level */ + } + + /* + * enable[1..0] = receiver enable command + * 0 = disable + * 1 = enable + * 2 = enable or force hunt mode if already enabled + */ + enable &= 3; if (enable) { if (!info->rx_enabled) rx_start(info); @@ -3385,7 +3401,6 @@ static void add_device(struct slgt_info *info) if (info->line < MAX_DEVICES) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; } slgt_device_count++; @@ -3447,7 +3462,7 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; - info->raw_rx_size = DMABUFSIZE; + info->rbuf_fill_level = DMABUFSIZE; info->port.close_delay = 5*HZ/10; info->port.closing_wait = 30*HZ; init_waitqueue_head(&info->status_event_wait_q); @@ -3934,15 +3949,7 @@ static void tdma_start(struct slgt_info *info) /* set 1st descriptor address */ wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); - switch(info->params.mode) { - case MGSL_MODE_RAW: - case MGSL_MODE_MONOSYNC: - case MGSL_MODE_BISYNC: - wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */ - break; - default: - wr_reg32(info, TDCSR, BIT0); /* DMA enable */ - } + wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */ } static void tx_stop(struct slgt_info *info) @@ -4145,7 +4152,7 @@ static void sync_mode(struct slgt_info *info) * 01 enable * 00 auto-CTS enable */ - val = 0; + val = BIT2; switch(info->params.mode) { case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; @@ -4418,6 +4425,8 @@ static void msc_set_vcr(struct slgt_info *info) break; } + if (info->if_mode & MGSL_INTERFACE_MSB_FIRST) + val |= BIT4; if (info->signals & SerialSignal_DTR) val |= BIT3; if (info->signals & SerialSignal_RTS) @@ -4456,16 +4465,7 @@ static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last while(!done) { /* reset current buffer for reuse */ info->rbufs[i].status = 0; - switch(info->params.mode) { - case MGSL_MODE_RAW: - case MGSL_MODE_MONOSYNC: - case MGSL_MODE_BISYNC: - set_desc_count(info->rbufs[i], info->raw_rx_size); - break; - default: - set_desc_count(info->rbufs[i], DMABUFSIZE); - } - + set_desc_count(info->rbufs[i], info->rbuf_fill_level); if (i == last) done = 1; if (++i == info->rbuf_count) @@ -4572,7 +4572,7 @@ check_again: DBGBH(("%s rx frame status=%04X size=%d\n", info->device_name, status, framesize)); - DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx"); + DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx"); if (framesize) { if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) { @@ -4592,7 +4592,7 @@ check_again: info->icount.rxok++; while(copy_count) { - int partial_count = min(copy_count, DMABUFSIZE); + int partial_count = min_t(int, copy_count, info->rbuf_fill_level); memcpy(p, info->rbufs[i].buf, partial_count); p += partial_count; copy_count -= partial_count; @@ -4683,6 +4683,56 @@ static unsigned int free_tbuf_count(struct slgt_info *info) return count; } +/* + * return number of bytes in unsent transmit DMA buffers + * and the serial controller tx FIFO + */ +static unsigned int tbuf_bytes(struct slgt_info *info) +{ + unsigned int total_count = 0; + unsigned int i = info->tbuf_current; + unsigned int reg_value; + unsigned int count; + unsigned int active_buf_count = 0; + + /* + * Add descriptor counts for all tx DMA buffers. + * If count is zero (cleared by DMA controller after read), + * the buffer is complete or is actively being read from. + * + * Record buf_count of last buffer with zero count starting + * from current ring position. buf_count is mirror + * copy of count and is not cleared by serial controller. + * If DMA controller is active, that buffer is actively + * being read so add to total. + */ + do { + count = desc_count(info->tbufs[i]); + if (count) + total_count += count; + else if (!total_count) + active_buf_count = info->tbufs[i].buf_count; + if (++i == info->tbuf_count) + i = 0; + } while (i != info->tbuf_current); + + /* read tx DMA status register */ + reg_value = rd_reg32(info, TDCSR); + + /* if tx DMA active, last zero count buffer is in use */ + if (reg_value & BIT0) + total_count += active_buf_count; + + /* add tx FIFO count = reg_value[15..8] */ + total_count += (reg_value >> 8) & 0xff; + + /* if transmitter active add one byte for shift register */ + if (info->tx_active) + total_count++; + + return total_count; +} + /* * load transmit DMA buffer(s) with data */ @@ -4721,6 +4771,7 @@ static void tx_load(struct slgt_info *info, const char *buf, unsigned int size) set_desc_eof(*d, 0); set_desc_count(*d, count); + d->buf_count = count; } info->tbuf_current = i;