X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fide%2FKconfig;h=04d9c4d459d00f61e77efcee48ea91797dc0e0a0;hb=5554b35933245e95710d709175e14c02cbc956a4;hp=1607536ff5fb3ec7da44b500157c1631703b3604;hpb=5b1a4bf220a8f6f2650fdfdfebfda0f22f674d97;p=linux-2.6-omap-h63xx.git diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1607536ff5f..04d9c4d459d 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -98,6 +98,12 @@ if BLK_DEV_IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_TIMINGS + bool + +config IDE_ATAPI + bool + config BLK_DEV_IDE_SATA bool "Support for SATA (deprecated; conflicts with libata SATA driver)" default n @@ -201,6 +207,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS config BLK_DEV_IDETAPE tristate "Include IDE/ATAPI TAPE support" + select IDE_ATAPI help If you have an IDE tape drive using the ATAPI protocol, say Y. ATAPI is a newer protocol used by IDE tape and CD-ROM drives, @@ -223,6 +230,7 @@ config BLK_DEV_IDETAPE config BLK_DEV_IDEFLOPPY tristate "Include IDE/ATAPI FLOPPY support" + select IDE_ATAPI ---help--- If you have an IDE floppy drive which uses the ATAPI protocol, answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy @@ -246,6 +254,7 @@ config BLK_DEV_IDEFLOPPY config BLK_DEV_IDESCSI tristate "SCSI emulation support" depends on SCSI + select IDE_ATAPI ---help--- WARNING: ide-scsi is no longer needed for cd writing applications! The 2.6 kernel supports direct writing to ide-cd, which eliminates @@ -320,6 +329,7 @@ config BLK_DEV_PLATFORM config BLK_DEV_CMD640 tristate "CMD640 chipset bugfix/support" depends on X86 + select IDE_TIMINGS ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and Pentium motherboards, usually in combination with a "Neptune" or @@ -449,6 +459,7 @@ config BLK_DEV_AEC62XX config BLK_DEV_ALI15X3 tristate "ALI M15x3 chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C @@ -463,6 +474,7 @@ config BLK_DEV_ALI15X3 config BLK_DEV_AMD74XX tristate "AMD and nVidia IDE support" depends on !ARM + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for AMD-7xx and AMD-8111 chips @@ -483,6 +495,7 @@ config BLK_DEV_ATIIXP config BLK_DEV_CMD64X tristate "CMD64{3|6|8|9} chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help Say Y here if you have an IDE controller which uses any of these @@ -497,6 +510,8 @@ config BLK_DEV_TRIFLEX config BLK_DEV_CY82C693 tristate "CY82C693 chipset support" + depends on ALPHA + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds detection and support for the CY82C693 chipset @@ -534,6 +549,7 @@ config BLK_DEV_CS5535 config BLK_DEV_HPT34X tristate "HPT34X chipset support" + depends on BROKEN select BLK_DEV_IDEDMA_PCI help This driver adds up to 4 more EIDE devices sharing a single @@ -689,6 +705,7 @@ config BLK_DEV_SIS5513 config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" depends on (PPC || ARM) + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help If you have a Winbond SL82c105 IDE controller, say Y here to enable @@ -719,6 +736,7 @@ config BLK_DEV_TRM290 config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for VIA BusMastering IDE chips. @@ -745,6 +763,7 @@ endif config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y + select IDE_TIMINGS help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -823,13 +842,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config BLK_DEV_IDE_BAST - tristate "Simtec BAST / Thorcom VR1000 IDE support" - depends on ARM && (ARCH_BAST || MACH_VR1000) - help - Say Y here if you want to support the onboard IDE channels on the - Simtec BAST or the Thorcom VR1000 - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 @@ -913,51 +925,12 @@ config BLK_DEV_Q40IDE config BLK_DEV_PALMCHIP_BK3710 tristate "Palmchip bk3710 IDE controller support" depends on ARCH_DAVINCI + select IDE_TIMINGS select BLK_DEV_IDEDMA_SFF help Say Y here if you want to support the onchip IDE controller on the TI DaVinci SoC - -config BLK_DEV_MPC8xx_IDE - tristate "MPC8xx IDE support" - depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE - help - This option provides support for IDE on Motorola MPC8xx Systems. - Please see 'Type of MPC8xx IDE interface' for details. - - If unsure, say N. - -choice - prompt "Type of MPC8xx IDE interface" - depends on BLK_DEV_MPC8xx_IDE - default IDE_8xx_PCCARD - -config IDE_8xx_PCCARD - bool "8xx_PCCARD" - ---help--- - Select how the IDE devices are connected to the MPC8xx system: - - 8xx_PCCARD uses the 8xx internal PCMCIA interface in combination - with a PC Card (e.g. ARGOSY portable Hard Disk Adapter), - ATA PC Card HDDs or ATA PC Flash Cards (example: TQM8xxL - systems) - - 8xx_DIRECT is used for directly connected IDE devices using the 8xx - internal PCMCIA interface (example: IVMS8 systems) - - EXT_DIRECT is used for IDE devices directly connected to the 8xx - bus using some glue logic, but _not_ the 8xx internal - PCMCIA interface (example: IDIF860 systems) - -config IDE_8xx_DIRECT - bool "8xx_DIRECT" - -config IDE_EXT_DIRECT - bool "EXT_DIRECT" - -endchoice - # no isa -> no vlb if ISA && (ALPHA || X86 || MIPS) @@ -975,6 +948,7 @@ config BLK_DEV_4DRIVES config BLK_DEV_ALI14XX tristate "ALI M14xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ali14xx.probe" kernel boot parameter. It enables support for the secondary IDE interface @@ -994,6 +968,7 @@ config BLK_DEV_DTC2278 config BLK_DEV_HT6560B tristate "Holtek HT6560B support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ht6560b.probe" kernel boot parameter. It enables support for the secondary IDE interface @@ -1003,6 +978,7 @@ config BLK_DEV_HT6560B config BLK_DEV_QD65XX tristate "QDI QD65xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the @@ -1026,30 +1002,4 @@ config BLK_DEV_IDEDMA endif -config BLK_DEV_HD_ONLY - bool "Old hard disk (MFM/RLL/IDE) driver" - depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN - help - There are two drivers for MFM/RLL/IDE hard disks. Most people use - the newer enhanced driver, but this old one is still around for two - reasons. Some older systems have strange timing problems and seem to - work only with the old driver (which itself does not work with some - newer systems). The other reason is that the old driver is smaller, - since it lacks the enhanced functionality of the new one. This makes - it a good choice for systems with very tight memory restrictions, or - for systems with only older MFM/RLL/ESDI drives. Choosing the old - driver can save 13 KB or so of kernel memory. - - If you want to use this driver together with the new one you have - to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new - driver from probing the primary interface. - - If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver - instead of this one. For more detailed information, read the - Disk-HOWTO, available from - . - -config BLK_DEV_HD - def_bool BLK_DEV_HD_ONLY - endif # IDE