X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fide%2Fide-iops.c;h=e17a9ee120ead8182c24cdc8fca7b81a043ed288;hb=2ad1e0558f369f11d180b7448d97164a0c5f07e2;hp=f5e73e2950d433664e82d387675dda5f5bd62f50;hpb=88b2b32babd46cd54d2de4d17eb869aea3383e11;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index f5e73e2950d..e17a9ee120e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -403,8 +403,12 @@ void ide_fix_driveid (struct hd_driveid *id)
 #endif
 }
 
-/* FIXME: exported for use by the USB storage (isd200.c) code only */
-EXPORT_SYMBOL(ide_fix_driveid);
+/*
+ * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
+ * removing leading/trailing blanks and compressing internal blanks.
+ * It is primarily used to tidy up the model name/number fields as
+ * returned by the WIN_[P]IDENTIFY commands.
+ */
 
 void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
 {
@@ -582,9 +586,12 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
 /*
  * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
  * We list them here and depend on the device side cable detection for them.
+ *
+ * Some optical devices with the buggy firmwares have the same problem.
  */
 static const struct drive_list_entry ivb_list[] = {
 	{ "QUANTUM FIREBALLlct10 05"	, "A03.0900"	},
+	{ "TSSTcorp CDDVDW SH-S202J"	, "SB00"	},
 	{ NULL				, NULL		}
 };
 
@@ -613,15 +620,10 @@ u8 eighty_ninty_three (ide_drive_t *drive)
 
 	/*
 	 * FIXME:
-	 * - change master/slave IDENTIFY order
 	 * - force bit13 (80c cable present) check also for !ivb devices
 	 *   (unless the slave device is pre-ATA3)
 	 */
-#ifndef CONFIG_IDEDMA_IVB
 	if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000)))
-#else
-	if (id->hw_config & 0x6000)
-#endif
 		return 1;
 
 no_80w:
@@ -698,35 +700,16 @@ static u8 ide_auto_reduce_xfer (ide_drive_t *drive)
 }
 #endif /* CONFIG_BLK_DEV_IDEDMA */
 
-/*
- * Update the 
- */
-int ide_driveid_update (ide_drive_t *drive)
+int ide_driveid_update(ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
+	ide_hwif_t *hwif = drive->hwif;
 	struct hd_driveid *id;
-#if 0
-	id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC);
-	if (!id)
-		return 0;
-
-	taskfile_lib_get_identify(drive, (char *)&id);
+	unsigned long timeout, flags;
 
-	ide_fix_driveid(id);
-	if (id) {
-		drive->id->dma_ultra = id->dma_ultra;
-		drive->id->dma_mword = id->dma_mword;
-		drive->id->dma_1word = id->dma_1word;
-		/* anything more ? */
-		kfree(id);
-	}
-	return 1;
-#else
 	/*
 	 * Re-read drive->id for possible DMA mode
 	 * change (copied from ide-probe.c)
 	 */
-	unsigned long timeout, flags;
 
 	SELECT_MASK(drive, 1);
 	if (IDE_CONTROL_REG)
@@ -768,7 +751,6 @@ int ide_driveid_update (ide_drive_t *drive)
 	}
 
 	return 1;
-#endif
 }
 
 int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
@@ -781,7 +763,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 //		msleep(50);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
-	if (hwif->ide_dma_check)	 /* check if host supports DMA */
+	if (hwif->ide_dma_on)	/* check if host supports DMA */
 		hwif->dma_host_off(drive);
 #endif
 
@@ -835,7 +817,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	if (speed >= XFER_SW_DMA_0)
 		hwif->dma_host_on(drive);
-	else if (hwif->ide_dma_check)	/* check if host supports DMA */
+	else if (hwif->ide_dma_on)	/* check if host supports DMA */
 		hwif->dma_off_quietly(drive);
 #endif