X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fide%2Fpci%2Fcs5535.c;h=5404fe4f701d79cc4bc651c99548ce35da9d4c67;hb=7f9dce38378f0a4a298e885553d6bb7121376376;hp=d7b5ea992e94a25ee10b46eac7bb4237a9848764;hpb=d870ec7281d8429ab17d2e0324f4d8ca3f3de62d;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index d7b5ea992e9..5404fe4f701 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -26,8 +26,6 @@
 #include <linux/pci.h>
 #include <linux/ide.h>
 
-#include "ide-timing.h"
-
 #define MSR_ATAC_BASE		0x51300000
 #define ATAC_GLD_MSR_CAP	(MSR_ATAC_BASE+0)
 #define ATAC_GLD_MSR_CONFIG	(MSR_ATAC_BASE+0x01)
@@ -75,13 +73,11 @@ static unsigned int cs5535_udma_timings[5] =
  */
 static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
 {
-
 	u32 reg = 0, dummy;
 	int unit = drive->select.b.unit;
 
-
 	/* Set the PIO timings */
-	if ((speed & XFER_MODE) == XFER_PIO) {
+	if (speed < XFER_SW_DMA_0) {
 		ide_drive_t *pair = ide_get_paired_drive(drive);
 		u8 cmd, pioa;
 
@@ -166,27 +162,16 @@ static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif)
 	return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }
 
-/****
- *	init_hwif_cs5535        -       Initialize one ide cannel
- *	@hwif: Channel descriptor
- *
- *	This gets invoked by the IDE driver once for each channel. It
- *	performs channel-specific pre-initialization before drive probing.
- *
- */
-static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
-{
-	hwif->set_pio_mode = &cs5535_set_pio_mode;
-	hwif->set_dma_mode = &cs5535_set_dma_mode;
-
-	hwif->cable_detect = cs5535_cable_detect;
-}
+static const struct ide_port_ops cs5535_port_ops = {
+	.set_pio_mode		= cs5535_set_pio_mode,
+	.set_dma_mode		= cs5535_set_dma_mode,
+	.cable_detect		= cs5535_cable_detect,
+};
 
 static const struct ide_port_info cs5535_chipset __devinitdata = {
 	.name		= "CS5535",
-	.init_hwif	= init_hwif_cs5535,
-	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE |
-			  IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_BOOTABLE,
+	.port_ops	= &cs5535_port_ops,
+	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
 	.pio_mask	= ATA_PIO4,
 	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA4,