X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fnet%2Fe1000e%2F82571.c;h=462351ca2c81ac991a088b971a0bc46b1f51c5a7;hb=bc84e0a160e383deb56568f4e03bc51b1ce16775;hp=7fe20310eb5f38514ae2affdb7bd00db7de2d35a;hpb=ae51801ba5ca27c2c571eb508daa99b392e79bd4;p=linux-2.6-omap-h63xx.git diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 7fe20310eb5..462351ca2c8 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -29,6 +29,9 @@ /* * 82571EB Gigabit Ethernet Controller * 82571EB Gigabit Ethernet Controller (Fiber) + * 82571EB Dual Port Gigabit Mezzanine Adapter + * 82571EB Quad Port Gigabit Mezzanine Adapter + * 82571PT Gigabit PT Quad Port Server ExpressModule * 82572EI Gigabit Ethernet Controller (Copper) * 82572EI Gigabit Ethernet Controller (Fiber) * 82572EI Gigabit Ethernet Controller @@ -72,7 +75,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - if (hw->media_type != e1000_media_type_copper) { + if (hw->phy.media_type != e1000_media_type_copper) { phy->type = e1000_phy_none; return 0; } @@ -150,7 +153,8 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) if (((eecd >> 15) & 0x3) == 0x3) { nvm->type = e1000_nvm_flash_hw; nvm->word_size = 2048; - /* Autonomous Flash update bit must be cleared due + /* + * Autonomous Flash update bit must be cleared due * to Flash update issue. */ eecd &= ~E1000_EECD_AUPDEN; @@ -159,13 +163,18 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) } /* Fall Through */ default: - nvm->type = e1000_nvm_eeprom_spi; + nvm->type = e1000_nvm_eeprom_spi; size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - /* Added to a constant, "size" becomes the left-shift value + /* + * Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; + + /* EEPROM access above 16k is unsupported */ + if (size > 14) + size = 14; nvm->word_size = 1 << size; break; } @@ -190,16 +199,16 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) case E1000_DEV_ID_82571EB_FIBER: case E1000_DEV_ID_82572EI_FIBER: case E1000_DEV_ID_82571EB_QUAD_FIBER: - hw->media_type = e1000_media_type_fiber; + hw->phy.media_type = e1000_media_type_fiber; break; case E1000_DEV_ID_82571EB_SERDES: case E1000_DEV_ID_82572EI_SERDES: case E1000_DEV_ID_82571EB_SERDES_DUAL: case E1000_DEV_ID_82571EB_SERDES_QUAD: - hw->media_type = e1000_media_type_internal_serdes; + hw->phy.media_type = e1000_media_type_internal_serdes; break; default: - hw->media_type = e1000_media_type_copper; + hw->phy.media_type = e1000_media_type_copper; break; } @@ -208,25 +217,28 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = - (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; /* check for link */ - switch (hw->media_type) { + switch (hw->phy.media_type) { case e1000_media_type_copper: func->setup_physical_interface = e1000_setup_copper_link_82571; func->check_for_link = e1000e_check_for_copper_link; func->get_link_up_info = e1000e_get_speed_and_duplex_copper; break; case e1000_media_type_fiber: - func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; + func->setup_physical_interface = + e1000_setup_fiber_serdes_link_82571; func->check_for_link = e1000e_check_for_fiber_link; - func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; + func->get_link_up_info = + e1000e_get_speed_and_duplex_fiber_serdes; break; case e1000_media_type_internal_serdes: - func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; + func->setup_physical_interface = + e1000_setup_fiber_serdes_link_82571; func->check_for_link = e1000e_check_for_serdes_link; - func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; + func->get_link_up_info = + e1000e_get_speed_and_duplex_fiber_serdes; break; default: return -E1000_ERR_CONFIG; @@ -236,7 +248,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) return 0; } -static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter) +static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; static int global_quad_port_a; /* global port a indication */ @@ -322,10 +334,12 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* The 82571 firmware may still be configuring the PHY. + /* + * The 82571 firmware may still be configuring the PHY. * In this case, we cannot access the PHY until the * configuration is done. So we explicitly set the - * PHY ID. */ + * PHY ID. + */ phy->id = IGP01E1000_I_PHY_ID; break; case e1000_82573: @@ -479,8 +493,10 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - /* If our nvm is an EEPROM, then we're done - * otherwise, commit the checksum to the flash NVM. */ + /* + * If our nvm is an EEPROM, then we're done + * otherwise, commit the checksum to the flash NVM. + */ if (hw->nvm.type != e1000_nvm_flash_hw) return ret_val; @@ -496,7 +512,8 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) /* Reset the firmware if using STM opcode. */ if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { - /* The enabling of and the actual reset must be done + /* + * The enabling of and the actual reset must be done * in two write cycles. */ ew32(HICR, E1000_HICR_FW_RESET_ENABLE); @@ -557,8 +574,10 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u32 eewr = 0; s32 ret_val = 0; - /* A check for invalid values: offset too large, too many words, - * and not enough words. */ + /* + * A check for invalid values: offset too large, too many words, + * and not enough words. + */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { hw_dbg(hw, "nvm parameter(s) out of bounds\n"); @@ -645,30 +664,32 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. */ + * SmartSpeed, so performance is maintained. + */ if (phy->smart_speed == e1000_smart_speed_on) { ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) return ret_val; data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); if (ret_val) return ret_val; } else if (phy->smart_speed == e1000_smart_speed_off) { ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); if (ret_val) return ret_val; } @@ -693,7 +714,8 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) s32 ret_val; u16 i = 0; - /* Prevent the PCI-E bus from sticking if there is no TLP connection + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -709,8 +731,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) msleep(10); - /* Must acquire the MDIO ownership before MAC reset. - * Ownership defaults to firmware after a reset. */ + /* + * Must acquire the MDIO ownership before MAC reset. + * Ownership defaults to firmware after a reset. + */ if (hw->mac.type == e1000_82573) { extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; @@ -747,7 +771,8 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) /* We don't want to continue accessing MAC registers. */ return ret_val; - /* Phy configuration from NVM just starts after EECD_AUTO_RD is set. + /* + * Phy configuration from NVM just starts after EECD_AUTO_RD is set. * Need to wait for Phy configuration completion before accessing * NVM and Phy. */ @@ -793,7 +818,8 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) e1000e_clear_vfta(hw); /* Setup the receive address. */ - /* If, however, a locally administered address was assigned to the + /* + * If, however, a locally administered address was assigned to the * 82571, we must reserve a RAR for it to work around an issue where * resetting one port will reload the MAC on the other port. */ @@ -810,19 +836,19 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) ret_val = e1000_setup_link_82571(hw); /* Set the transmit descriptor write-back policy */ - reg_data = er32(TXDCTL); + reg_data = er32(TXDCTL(0)); reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL, reg_data); + ew32(TXDCTL(0), reg_data); /* ...for both queues. */ if (mac->type != e1000_82573) { - reg_data = er32(TXDCTL1); + reg_data = er32(TXDCTL(1)); reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL1, reg_data); + ew32(TXDCTL(1), reg_data); } else { e1000e_enable_tx_pkt_filtering(hw); reg_data = er32(GCR); @@ -830,7 +856,8 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) ew32(GCR, reg_data); } - /* Clear all of the statistics registers (clear on read). It is + /* + * Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -851,17 +878,17 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) u32 reg; /* Transmit Descriptor Control 0 */ - reg = er32(TXDCTL); + reg = er32(TXDCTL(0)); reg |= (1 << 22); - ew32(TXDCTL, reg); + ew32(TXDCTL(0), reg); /* Transmit Descriptor Control 1 */ - reg = er32(TXDCTL1); + reg = er32(TXDCTL(1)); reg |= (1 << 22); - ew32(TXDCTL1, reg); + ew32(TXDCTL(1), reg); /* Transmit Arbitration Control 0 */ - reg = er32(TARC0); + reg = er32(TARC(0)); reg &= ~(0xF << 27); /* 30:27 */ switch (hw->mac.type) { case e1000_82571: @@ -871,10 +898,10 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) default: break; } - ew32(TARC0, reg); + ew32(TARC(0), reg); /* Transmit Arbitration Control 1 */ - reg = er32(TARC1); + reg = er32(TARC(1)); switch (hw->mac.type) { case e1000_82571: case e1000_82572: @@ -884,7 +911,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg &= ~(1 << 28); else reg |= (1 << 28); - ew32(TARC1, reg); + ew32(TARC(1), reg); break; default: break; @@ -922,7 +949,8 @@ void e1000e_clear_vfta(struct e1000_hw *hw) if (hw->mac.type == e1000_82573) { if (hw->mng_cookie.vlan_id != 0) { - /* The VFTA is a 4096b bit-field, each identifying + /* + * The VFTA is a 4096b bit-field, each identifying * a single VLAN ID. The following operations * determine which 32b entry (i.e. offset) into the * array we want to set the VLAN ID (i.e. bit) of @@ -936,7 +964,8 @@ void e1000e_clear_vfta(struct e1000_hw *hw) } } for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - /* If the offset we want to clear is the same offset of the + /* + * If the offset we want to clear is the same offset of the * manageability VLAN ID, then clear all bits except that of * the manageability unit. */ @@ -947,7 +976,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw) } /** - * e1000_mc_addr_list_update_82571 - Update Multicast addresses + * e1000_update_mc_addr_list_82571 - Update Multicast addresses * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program * @mc_addr_count: number of multicast addresses to program @@ -959,7 +988,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw) * The parameter rar_count will usually be hw->mac.rar_entry_count * unless there are workarounds that change this. **/ -static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw, +static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw, u8 *mc_addr_list, u32 mc_addr_count, u32 rar_used_count, @@ -968,8 +997,8 @@ static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw, if (e1000e_get_laa_state_82571(hw)) rar_count--; - e1000e_mc_addr_list_update_generic(hw, mc_addr_list, mc_addr_count, - rar_used_count, rar_count); + e1000e_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count, + rar_used_count, rar_count); } /** @@ -984,12 +1013,13 @@ static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw, **/ static s32 e1000_setup_link_82571(struct e1000_hw *hw) { - /* 82573 does not have a word in the NVM to determine + /* + * 82573 does not have a word in the NVM to determine * the default flow control setting, so we explicitly * set it to full. */ if (hw->mac.type == e1000_82573) - hw->mac.fc = e1000_fc_full; + hw->fc.type = e1000_fc_full; return e1000e_setup_link(hw); } @@ -1050,14 +1080,14 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* If SerDes loopback mode is entered, there is no form + /* + * If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback * mode. This prevents drivers from twiddling their thumbs * if another tool failed to take it out of loopback mode. */ - ew32(SCTL, - E1000_SCTL_DISABLE_SERDES_LOOPBACK); + ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); break; default: break; @@ -1124,7 +1154,8 @@ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) /* If workaround is activated... */ if (state) - /* Hold a copy of the LAA in RAR[14] This is done so that + /* + * Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed, the actual LAA is in one of the RARs and no * incoming packets directed to this port are dropped. @@ -1152,7 +1183,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_hw) return 0; - /* Check bit 4 of word 10h. If it is 0, firmware is done updating + /* + * Check bit 4 of word 10h. If it is 0, firmware is done updating * 10h-12h. Checksum may need to be fixed. */ ret_val = e1000_read_nvm(hw, 0x10, 1, &data); @@ -1160,7 +1192,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) return ret_val; if (!(data & 0x10)) { - /* Read 0x23 and check bit 15. This bit is a 1 + /* + * Read 0x23 and check bit 15. This bit is a 1 * when the checksum has already been fixed. If * the checksum is still wrong and this bit is a * 1, we need to return bad checksum. Otherwise, @@ -1240,7 +1273,7 @@ static struct e1000_mac_operations e82571_mac_ops = { /* .get_link_up_info: media type dependent */ .led_on = e1000e_led_on_generic, .led_off = e1000e_led_off_generic, - .mc_addr_list_update = e1000_mc_addr_list_update_82571, + .update_mc_addr_list = e1000_update_mc_addr_list_82571, .reset_hw = e1000_reset_hw_82571, .init_hw = e1000_init_hw_82571, .setup_link = e1000_setup_link_82571, @@ -1293,18 +1326,16 @@ struct e1000_info e1000_82571_info = { .mac = e1000_82571, .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_JUMBO_FRAMES - | FLAG_HAS_STATS_PTC_PRC | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3 | FLAG_RX_CSUM_ENABLED | FLAG_HAS_CTRLEXT_ON_LOAD - | FLAG_HAS_STATS_ICR_ICT | FLAG_HAS_SMART_POWER_DOWN | FLAG_RESET_OVERWRITES_LAA /* errata */ | FLAG_TARC_SPEED_MODE_BIT /* errata */ | FLAG_APME_CHECK_PORT_B, .pba = 38, - .get_invariants = e1000_get_invariants_82571, + .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_igp, .nvm_ops = &e82571_nvm_ops, @@ -1314,15 +1345,13 @@ struct e1000_info e1000_82572_info = { .mac = e1000_82572, .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_JUMBO_FRAMES - | FLAG_HAS_STATS_PTC_PRC | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3 | FLAG_RX_CSUM_ENABLED | FLAG_HAS_CTRLEXT_ON_LOAD - | FLAG_HAS_STATS_ICR_ICT | FLAG_TARC_SPEED_MODE_BIT, /* errata */ .pba = 38, - .get_invariants = e1000_get_invariants_82571, + .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_igp, .nvm_ops = &e82571_nvm_ops, @@ -1332,17 +1361,15 @@ struct e1000_info e1000_82573_info = { .mac = e1000_82573, .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_JUMBO_FRAMES - | FLAG_HAS_STATS_PTC_PRC | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3 | FLAG_RX_CSUM_ENABLED - | FLAG_HAS_STATS_ICR_ICT | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT | FLAG_HAS_ERT | FLAG_HAS_SWSM_ON_LOAD, .pba = 20, - .get_invariants = e1000_get_invariants_82571, + .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_m88, .nvm_ops = &e82571_nvm_ops,