X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fnet%2Fsmc91x.h;h=22209b6f14057e0fadadebe9d441e5b33172d334;hb=d92bc318547507a944a22e7ef936793dc0fe167f;hp=8606818653f88601fb63896b3aa0fcf19e169dae;hpb=8bbd54d69e9c66adbf544e21d8dcfb15fb9198f7;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 8606818653f..22209b6f140 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -40,23 +40,46 @@
  * Define your architecture specific bus configuration parameters here.
  */
 
-#if	defined(CONFIG_ARCH_LUBBOCK)
+#if defined(CONFIG_ARCH_LUBBOCK) ||\
+    defined(CONFIG_MACH_MAINSTONE) ||\
+    defined(CONFIG_MACH_ZYLONITE) ||\
+    defined(CONFIG_MACH_LITTLETON)
 
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	0
+#include <asm/mach-types.h>
+
+/* Now the bus width is specified in the platform data
+ * pretend here to support all I/O access types
+ */
+#define SMC_CAN_USE_8BIT	1
 #define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
+#define SMC_CAN_USE_32BIT	1
 #define SMC_NOWAIT		1
 
-/* The first two address lines aren't connected... */
-#define SMC_IO_SHIFT		2
+#define SMC_IO_SHIFT		(lp->io_shift)
 
+#define SMC_inb(a, r)		readb((a) + (r))
 #define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_inl(a, r)		readl((a) + (r))
+#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
+#define SMC_outl(v, a, r)	writel(v, (a) + (r))
 #define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
+#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
 #define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
+/* We actually can't write halfwords properly if not word aligned */
+static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
+{
+	if (machine_is_mainstone() && reg & 2) {
+		unsigned int v = val << 16;
+		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
+		writel(v, ioaddr + (reg & ~2));
+	} else {
+		writew(val, ioaddr + reg);
+	}
+}
+
 #elif defined(CONFIG_BLACKFIN)
 
 #define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
@@ -195,7 +218,6 @@
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
 
 #elif	defined(CONFIG_ARCH_INNOKOM) || \
-	defined(CONFIG_MACH_MAINSTONE) || \
 	defined(CONFIG_ARCH_PXA_IDP) || \
 	defined(CONFIG_ARCH_RAMSES) || \
 	defined(CONFIG_ARCH_PCM027)
@@ -229,22 +251,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 	}
 }
 
-#elif defined(CONFIG_MACH_ZYLONITE)
-
-#define SMC_CAN_USE_8BIT        1
-#define SMC_CAN_USE_16BIT       1
-#define SMC_CAN_USE_32BIT       0
-#define SMC_IO_SHIFT            0
-#define SMC_NOWAIT              1
-#define SMC_USE_PXA_DMA		1
-#define SMC_inb(a, r)           readb((a) + (r))
-#define SMC_inw(a, r)           readw((a) + (r))
-#define SMC_insw(a, r, p, l)    insw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)   outsw((a) + (r), p, l)
-#define SMC_outb(v, a, r)       writeb(v, (a) + (r))
-#define SMC_outw(v, a, r)       writew(v, (a) + (r))
-#define SMC_IRQ_FLAGS		(-1)	/* from resource */
-
 #elif	defined(CONFIG_ARCH_OMAP)
 
 /* We can only do 16-bit reads and writes in the static memory space. */
@@ -454,7 +460,6 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 #define RPC_LSA_DEFAULT		RPC_LED_100_10
 #define RPC_LSB_DEFAULT		RPC_LED_TX_RX
 
-#define SMC_DYNAMIC_BUS_CONFIG
 #endif
 
 
@@ -493,7 +498,7 @@ struct smc_local {
 
 	spinlock_t lock;
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	/* DMA needs the physical address of the chip */
 	u_long physaddr;
 	struct device *device;
@@ -501,20 +506,17 @@ struct smc_local {
 	void __iomem *base;
 	void __iomem *datacs;
 
+	/* the low address lines on some platforms aren't connected... */
+	int	io_shift;
+
 	struct smc91x_platdata cfg;
 };
 
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-#define SMC_8BIT(p) (((p)->cfg.flags & SMC91X_USE_8BIT) && SMC_CAN_USE_8BIT)
-#define SMC_16BIT(p) (((p)->cfg.flags & SMC91X_USE_16BIT) && SMC_CAN_USE_16BIT)
-#define SMC_32BIT(p) (((p)->cfg.flags & SMC91X_USE_32BIT) && SMC_CAN_USE_32BIT)
-#else
-#define SMC_8BIT(p) SMC_CAN_USE_8BIT
-#define SMC_16BIT(p) SMC_CAN_USE_16BIT
-#define SMC_32BIT(p) SMC_CAN_USE_32BIT
-#endif
+#define SMC_8BIT(p)	((p)->cfg.flags & SMC91X_USE_8BIT)
+#define SMC_16BIT(p)	((p)->cfg.flags & SMC91X_USE_16BIT)
+#define SMC_32BIT(p)	((p)->cfg.flags & SMC91X_USE_32BIT)
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 /*
  * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
  * always happening in irq context so no need to worry about races.  TX is
@@ -608,7 +610,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 {
 	DCSR(dma) = 0;
 }
-#endif  /* SMC_USE_PXA_DMA */
+#endif  /* CONFIG_ARCH_PXA */
 
 
 /*