X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fscsi%2Fqla1280.c;h=e0230249fa0fb55cb9cda06f399b2c8ee0318e9f;hb=d11d9b2dd2c43dd99a491df8a83ae28401db0044;hp=637fb6565d2845dc32a81606f93d09f263b01921;hpb=32983696a48a6c41d99f3eca82ba7510a552d843;p=linux-2.6-omap-h63xx.git diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 637fb6565d2..e0230249fa0 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -17,9 +17,11 @@ * General Public License for more details. * ******************************************************************************/ -#define QLA1280_VERSION "3.25" +#define QLA1280_VERSION "3.26" /***************************************************************************** Revision History: + Rev 3.26, January 16, 2006 Jes Sorensen + - Ditch all < 2.6 support Rev 3.25.1, February 10, 2005 Christoph Hellwig - use pci_map_single to map non-S/G requests - remove qla1280_proc_info @@ -356,25 +358,18 @@ #include #include -#if LINUX_VERSION_CODE >= 0x020545 #include #include #include #include #include -#else -#include -#include "scsi.h" -#include -#include "sd.h" -#endif #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) #include #endif -#if LINUX_VERSION_CODE < 0x020407 -#error "Kernels older than 2.4.7 are no longer supported" +#if LINUX_VERSION_CODE < 0x020600 +#error "Kernels older than 2.6.0 are no longer supported" #endif @@ -441,52 +436,6 @@ #define NVRAM_DELAY() udelay(500) /* 2 microseconds */ -#if LINUX_VERSION_CODE < 0x020500 -#define HOST_LOCK &io_request_lock -#define irqreturn_t void -#define IRQ_RETVAL(foo) -#define MSG_ORDERED_TAG 1 - -#define DMA_BIDIRECTIONAL SCSI_DATA_UNKNOWN -#define DMA_TO_DEVICE SCSI_DATA_WRITE -#define DMA_FROM_DEVICE SCSI_DATA_READ -#define DMA_NONE SCSI_DATA_NONE - -#ifndef HAVE_SECTOR_T -typedef unsigned int sector_t; -#endif - -static inline void -scsi_adjust_queue_depth(struct scsi_device *device, int tag, int depth) -{ - if (tag) { - device->tagged_queue = tag; - device->current_tag = 0; - } - device->queue_depth = depth; -} -static inline struct Scsi_Host *scsi_host_alloc(Scsi_Host_Template *t, size_t s) -{ - return scsi_register(t, s); -} -static inline void scsi_host_put(struct Scsi_Host *h) -{ - scsi_unregister(h); -} -#else -#define HOST_LOCK ha->host->host_lock -#endif -#if LINUX_VERSION_CODE < 0x020600 -#define DEV_SIMPLE_TAGS(device) device->tagged_queue -/* - * Hack around that qla1280_remove_one is called from - * qla1280_release in 2.4 - */ -#undef __devexit -#define __devexit -#else -#define DEV_SIMPLE_TAGS(device) device->simple_tags -#endif #if defined(__ia64__) && !defined(ia64_platform_is) #define ia64_platform_is(foo) (!strcmp(x, platform_name)) #endif @@ -506,9 +455,6 @@ static void qla1280_remove_one(struct pci_dev *); * QLogic Driver Support Function Prototypes. */ static void qla1280_done(struct scsi_qla_host *); -#if LINUX_VERSION_CODE < 0x020545 -static void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *); -#endif static int qla1280_get_token(char *); static int qla1280_setup(char *s) __init; @@ -610,11 +556,7 @@ __setup("qla1280=", qla1280_setup); #define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer) #define CMD_RESULT(Cmnd) Cmnd->result #define CMD_HANDLE(Cmnd) Cmnd->host_scribble -#if LINUX_VERSION_CODE < 0x020545 -#define CMD_REQUEST(Cmnd) Cmnd->request.cmd -#else #define CMD_REQUEST(Cmnd) Cmnd->request->cmd -#endif #define CMD_HOST(Cmnd) Cmnd->device->host #define SCSI_BUS_32(Cmnd) Cmnd->device->channel @@ -639,10 +581,8 @@ struct qla_boards { static struct pci_device_id qla1280_pci_tbl[] = { {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, -#ifdef CONFIG_SCSI_QLOGIC_1280_1040 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, -#endif {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240, @@ -1066,10 +1006,10 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action) add_timer(&timer); /* wait for the action to complete (or the timer to expire) */ - spin_unlock_irq(HOST_LOCK); + spin_unlock_irq(ha->host->host_lock); wait_for_completion(&wait); del_timer_sync(&timer); - spin_lock_irq(HOST_LOCK); + spin_lock_irq(ha->host->host_lock); sp->wait = NULL; /* the only action we might get a fail for is abort */ @@ -1175,96 +1115,6 @@ qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev, return 0; } -#if LINUX_VERSION_CODE < 0x020600 -static int -qla1280_detect(Scsi_Host_Template *template) -{ - struct pci_device_id *id = &qla1280_pci_tbl[0]; - struct pci_dev *pdev = NULL; - int num_hosts = 0; - - if (sizeof(struct srb) > sizeof(Scsi_Pointer)) { - printk(KERN_WARNING - "qla1280: struct srb too big, aborting\n"); - return 0; - } - - if ((DMA_BIDIRECTIONAL != PCI_DMA_BIDIRECTIONAL) || - (DMA_TO_DEVICE != PCI_DMA_TODEVICE) || - (DMA_FROM_DEVICE != PCI_DMA_FROMDEVICE) || - (DMA_NONE != PCI_DMA_NONE)) { - printk(KERN_WARNING - "qla1280: dma direction bits don't match\n"); - return 0; - } - -#ifdef MODULE - /* - * If we are called as a module, the qla1280 pointer may not be null - * and it would point to our bootup string, just like on the lilo - * command line. IF not NULL, then process this config string with - * qla1280_setup - * - * Boot time Options - * To add options at boot time add a line to your lilo.conf file like: - * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}" - * which will result in the first four devices on the first two - * controllers being set to a tagged queue depth of 32. - */ - if (qla1280) - qla1280_setup(qla1280); -#endif - - /* First Initialize QLA12160 on PCI Bus 1 Dev 2 */ - while ((pdev = pci_find_device(id->vendor, id->device, pdev))) { - if (pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) { - if (!qla1280_probe_one(pdev, id)) - num_hosts++; - } - } - - pdev = NULL; - /* Try and find each different type of adapter we support */ - for (id = &qla1280_pci_tbl[0]; id->device; id++) { - while ((pdev = pci_find_device(id->vendor, id->device, pdev))) { - /* - * skip QLA12160 already initialized on - * PCI Bus 1 Dev 2 since we already initialized - * and presented it - */ - if (id->device == PCI_DEVICE_ID_QLOGIC_ISP12160 && - pdev->bus->number == 1 && - PCI_SLOT(pdev->devfn) == 2) - continue; - - if (!qla1280_probe_one(pdev, id)) - num_hosts++; - } - } - - return num_hosts; -} - -/* - * This looks a bit ugly as we could just pass down host to - * qla1280_remove_one, but I want to keep qla1280_release purely a wrapper - * around pci_driver::remove as used from 2.6 onwards. - */ -static int -qla1280_release(struct Scsi_Host *host) -{ - struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; - - qla1280_remove_one(ha->pdev); - return 0; -} - -static int -qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[]) -{ - return qla1280_biosparam(disk->device, NULL, disk->capacity, geom); -} -#endif /* disable risc and host interrupts */ static inline void @@ -1297,7 +1147,7 @@ qla1280_intr_handler(int irq, void *dev_id, struct pt_regs *regs) ENTER_INTR ("qla1280_intr_handler"); ha = (struct scsi_qla_host *)dev_id; - spin_lock(HOST_LOCK); + spin_lock(ha->host->host_lock); ha->isr_count++; reg = ha->iobase; @@ -1313,7 +1163,7 @@ qla1280_intr_handler(int irq, void *dev_id, struct pt_regs *regs) if (!list_empty(&ha->done_q)) qla1280_done(ha); - spin_unlock(HOST_LOCK); + spin_unlock(ha->host->host_lock); qla1280_enable_intrs(ha); @@ -1413,11 +1263,9 @@ qla1280_slave_configure(struct scsi_device *device) scsi_adjust_queue_depth(device, 0, default_depth); } -#if LINUX_VERSION_CODE > 0x020500 nv->bus[bus].target[target].parameter.enable_sync = device->sdtr; nv->bus[bus].target[target].parameter.enable_wide = device->wdtr; nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr; -#endif if (driver_setup.no_sync || (driver_setup.sync_mask && @@ -1434,38 +1282,14 @@ qla1280_slave_configure(struct scsi_device *device) nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0; } - spin_lock_irqsave(HOST_LOCK, flags); + spin_lock_irqsave(ha->host->host_lock, flags); if (nv->bus[bus].target[target].parameter.enable_sync) status = qla1280_set_target_parameters(ha, bus, target); qla1280_get_target_parameters(ha, device); - spin_unlock_irqrestore(HOST_LOCK, flags); + spin_unlock_irqrestore(ha->host->host_lock, flags); return status; } -#if LINUX_VERSION_CODE < 0x020545 -/************************************************************************** - * qla1280_select_queue_depth - * - * Sets the queue depth for each SCSI device hanging off the input - * host adapter. We use a queue depth of 2 for devices that do not - * support tagged queueing. - **************************************************************************/ -static void -qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q) -{ - struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; - struct scsi_device *sdev; - - ENTER("qla1280_select_queue_depth"); - for (sdev = sdev_q; sdev; sdev = sdev->next) - if (sdev->host == host) - qla1280_slave_configure(sdev); - - if (sdev_q) - qla1280_check_for_dead_scsi_bus(ha, sdev_q->channel); - LEAVE("qla1280_select_queue_depth"); -} -#endif /* * qla1280_done @@ -1525,10 +1349,6 @@ qla1280_done(struct scsi_qla_host *ha) CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE; ha->actthreads--; -#if LINUX_VERSION_CODE < 0x020500 - if (cmd->cmnd[0] == INQUIRY) - qla1280_get_target_options(cmd, ha); -#endif (*(cmd)->scsi_done)(cmd); if(sp->wait != NULL) @@ -1657,9 +1477,7 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha) struct device_reg __iomem *reg; int status; int bus; -#if LINUX_VERSION_CODE > 0x020500 unsigned long flags; -#endif ENTER("qla1280_initialize_adapter"); @@ -1697,15 +1515,12 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha) "NVRAM\n"); } -#if LINUX_VERSION_CODE >= 0x020500 /* * It's necessary to grab the spin here as qla1280_mailbox_command * needs to be able to drop the lock unconditionally to wait * for completion. - * In 2.4 ->detect is called with the io_request_lock held. */ - spin_lock_irqsave(HOST_LOCK, flags); -#endif + spin_lock_irqsave(ha->host->host_lock, flags); status = qla1280_load_firmware(ha); if (status) { @@ -1737,9 +1552,8 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha) ha->flags.online = 1; out: -#if LINUX_VERSION_CODE >= 0x020500 - spin_unlock_irqrestore(HOST_LOCK, flags); -#endif + spin_unlock_irqrestore(ha->host->host_lock, flags); + if (status) dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n"); @@ -2652,14 +2466,14 @@ qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb) timer.function = qla1280_mailbox_timeout; add_timer(&timer); - spin_unlock_irq(HOST_LOCK); + spin_unlock_irq(ha->host->host_lock); WRT_REG_WORD(®->host_cmd, HC_SET_HOST_INT); data = qla1280_debounce_register(®->istatus); wait_for_completion(&wait); del_timer_sync(&timer); - spin_lock_irq(HOST_LOCK); + spin_lock_irq(ha->host->host_lock); ha->mailbox_wait = NULL; @@ -2772,9 +2586,9 @@ qla1280_bus_reset(struct scsi_qla_host *ha, int bus) ha->bus_settings[bus].scsi_bus_dead = 1; ha->bus_settings[bus].failed_reset_count++; } else { - spin_unlock_irq(HOST_LOCK); + spin_unlock_irq(ha->host->host_lock); ssleep(reset_delay); - spin_lock_irq(HOST_LOCK); + spin_lock_irq(ha->host->host_lock); ha->bus_settings[bus].scsi_bus_dead = 0; ha->bus_settings[bus].failed_reset_count = 0; @@ -3080,7 +2894,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd); /* Enable simple tag queuing if device supports it. */ - if (DEV_SIMPLE_TAGS(cmd->device)) + if (cmd->device->simple_tags) pkt->control_flags |= cpu_to_le16(BIT_3); /* Load SCSI command packet. */ @@ -3379,7 +3193,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd); /* Enable simple tag queuing if device supports it. */ - if (DEV_SIMPLE_TAGS(cmd->device)) + if (cmd->device->simple_tags) pkt->control_flags |= cpu_to_le16(BIT_3); /* Load SCSI command packet. */ @@ -3891,50 +3705,6 @@ qla1280_rst_aen(struct scsi_qla_host *ha) } -#if LINUX_VERSION_CODE < 0x020500 -/* - * - */ -static void -qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha) -{ - unsigned char *result; - struct nvram *n; - int bus, target, lun; - - bus = SCSI_BUS_32(cmd); - target = SCSI_TCN_32(cmd); - lun = SCSI_LUN_32(cmd); - - /* - * Make sure to not touch anything if someone is using the - * sg interface. - */ - if (cmd->use_sg || (CMD_RESULT(cmd) >> 16) != DID_OK || lun) - return; - - result = cmd->request_buffer; - n = &ha->nvram; - - n->bus[bus].target[target].parameter.enable_wide = 0; - n->bus[bus].target[target].parameter.enable_sync = 0; - n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0; - - if (result[7] & 0x60) - n->bus[bus].target[target].parameter.enable_wide = 1; - if (result[7] & 0x10) - n->bus[bus].target[target].parameter.enable_sync = 1; - if ((result[2] >= 3) && (result[4] + 5 > 56) && - (result[56] & 0x4)) - n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1; - - dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n", - n->bus[bus].target[target].parameter.enable_wide, - n->bus[bus].target[target].parameter.enable_sync, - n->bus[bus].target[target].ppr_1x160.flags.enable_ppr); -} -#endif - /* * qla1280_status_entry * Processes received ISP status entry. @@ -4273,7 +4043,7 @@ qla1280_get_target_parameters(struct scsi_qla_host *ha, } else printk(" Async"); - if (DEV_SIMPLE_TAGS(device)) + if (device->simple_tags) printk(", Tagged queuing: depth %d", device->queue_depth); printk("\n"); } @@ -4487,7 +4257,7 @@ qla1280_get_token(char *str) return ret; } -#if LINUX_VERSION_CODE >= 0x020600 + static struct scsi_host_template qla1280_driver_template = { .module = THIS_MODULE, .proc_name = "qla1280", @@ -4506,27 +4276,7 @@ static struct scsi_host_template qla1280_driver_template = { .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, }; -#else -static Scsi_Host_Template qla1280_driver_template = { - .proc_name = "qla1280", - .name = "Qlogic ISP 1280/12160", - .detect = qla1280_detect, - .release = qla1280_release, - .info = qla1280_info, - .queuecommand = qla1280_queuecommand, - .eh_abort_handler = qla1280_eh_abort, - .eh_device_reset_handler= qla1280_eh_device_reset, - .eh_bus_reset_handler = qla1280_eh_bus_reset, - .eh_host_reset_handler = qla1280_eh_adapter_reset, - .bios_param = qla1280_biosparam_old, - .can_queue = 0xfffff, - .this_id = -1, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING, - .use_new_eh_code = 1, -}; -#endif + static int __devinit qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -4617,10 +4367,6 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) host->max_sectors = 1024; host->unique_id = host->host_no; -#if LINUX_VERSION_CODE < 0x020545 - host->select_queue_depths = qla1280_select_queue_depth; -#endif - error = -ENODEV; #if MEMORY_MAPPED_IO @@ -4668,21 +4414,15 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, host); -#if LINUX_VERSION_CODE >= 0x020600 error = scsi_add_host(host, &pdev->dev); if (error) goto error_disable_adapter; scsi_scan_host(host); -#else - scsi_set_pci_device(host, pdev); -#endif return 0; -#if LINUX_VERSION_CODE >= 0x020600 error_disable_adapter: qla1280_disable_intrs(ha); -#endif error_free_irq: free_irq(pdev->irq, ha); error_release_region: @@ -4714,9 +4454,7 @@ qla1280_remove_one(struct pci_dev *pdev) struct Scsi_Host *host = pci_get_drvdata(pdev); struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; -#if LINUX_VERSION_CODE >= 0x020600 scsi_remove_host(host); -#endif qla1280_disable_intrs(ha); @@ -4740,7 +4478,6 @@ qla1280_remove_one(struct pci_dev *pdev) scsi_host_put(host); } -#if LINUX_VERSION_CODE >= 0x020600 static struct pci_driver qla1280_pci_driver = { .name = "qla1280", .id_table = qla1280_pci_tbl, @@ -4786,10 +4523,6 @@ qla1280_exit(void) module_init(qla1280_init); module_exit(qla1280_exit); -#else -# define driver_template qla1280_driver_template -# include "scsi_module.c" -#endif MODULE_AUTHOR("Qlogic & Jes Sorensen"); MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");