X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fserial%2Fcrisv10.c;h=7ba7d70f04d6caaa8d8e5ce0cb31aa37bfc1168b;hb=6fd1af4cf98936f4034caf8f132c7826a6ffd0fa;hp=e642c22c80e230f8ad5da30a69b9512838cc34b9;hpb=f786ddd285b4100909a013041d3eee1be9fac4db;p=linux-2.6-omap-h63xx.git diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index e642c22c80e..7ba7d70f04d 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -1391,7 +1391,7 @@ static inline void e100_disable_rx_irq(struct e100_serial *info) #if defined(CONFIG_ETRAX_RS485) /* Enable RS-485 mode on selected port. This is UGLY. */ static int -e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r) +e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) { struct e100_serial * info = (struct e100_serial *)tty->driver_data; @@ -1409,13 +1409,11 @@ e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r) CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); #endif - info->rs485.rts_on_send = 0x01 & r->rts_on_send; - info->rs485.rts_after_sent = 0x01 & r->rts_after_sent; + info->rs485.flags = r->flags; if (r->delay_rts_before_send >= 1000) info->rs485.delay_rts_before_send = 1000; else info->rs485.delay_rts_before_send = r->delay_rts_before_send; - info->rs485.enabled = r->enabled; /* printk("rts: on send = %i, after = %i, enabled = %i", info->rs485.rts_on_send, info->rs485.rts_after_sent, @@ -1430,17 +1428,18 @@ e100_write_rs485(struct tty_struct *tty, const unsigned char *buf, int count) { struct e100_serial * info = (struct e100_serial *)tty->driver_data; - int old_enabled = info->rs485.enabled; + int old_value = (info->rs485.flags) & SER_RS485_ENABLED; /* rs485 is always implicitly enabled if we're using the ioctl() - * but it doesn't have to be set in the rs485_control + * but it doesn't have to be set in the serial_rs485 * (to be backward compatible with old apps) * So we store, set and restore it. */ - info->rs485.enabled = 1; + info->rs485.flags |= SER_RS485_ENABLED; /* rs_write now deals with RS485 if enabled */ count = rs_write(tty, buf, count); - info->rs485.enabled = old_enabled; + if (!old_value) + info->rs485.flags &= ~(SER_RS485_ENABLED); return count; } @@ -1451,7 +1450,7 @@ static void rs485_toggle_rts_timer_function(unsigned long data) struct e100_serial *info = (struct e100_serial *)data; fast_timers_rs485[info->line].function = NULL; - e100_rts(info, info->rs485.rts_after_sent); + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) e100_enable_rx(info); e100_enable_rx_irq(info); @@ -1647,7 +1646,7 @@ transmit_chars_dma(struct e100_serial *info) info->tr_running = 0; #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.enabled) { + if (info->rs485.flags & SER_RS485_ENABLED) { /* Set a short timer to toggle RTS */ start_one_shot_timer(&fast_timers_rs485[info->line], rs485_toggle_rts_timer_function, @@ -2577,7 +2576,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) info->icount.tx++; if (info->xmit.head == info->xmit.tail) { #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.enabled) { + if (info->rs485.flags & SER_RS485_ENABLED) { /* Set a short timer to toggle RTS */ start_one_shot_timer(&fast_timers_rs485[info->line], rs485_toggle_rts_timer_function, @@ -3218,7 +3217,7 @@ rs_write(struct tty_struct *tty, #if defined(CONFIG_ETRAX_RS485) struct e100_serial *info = (struct e100_serial *)tty->driver_data; - if (info->rs485.enabled) + if (info->rs485.flags & SER_RS485_ENABLED) { /* If we are in RS-485 mode, we need to toggle RTS and disable * the receiver before initiating a DMA transfer @@ -3228,7 +3227,7 @@ rs_write(struct tty_struct *tty, fast_timers_rs485[info->line].function = NULL; del_fast_timer(&fast_timers_rs485[info->line]); #endif - e100_rts(info, info->rs485.rts_on_send); + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND)); #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) e100_disable_rx(info); e100_enable_rx_irq(info); @@ -3242,7 +3241,7 @@ rs_write(struct tty_struct *tty, count = rs_raw_write(tty, buf, count); #if defined(CONFIG_ETRAX_RS485) - if (info->rs485.enabled) + if (info->rs485.flags & SER_RS485_ENABLED) { unsigned int val; /* If we are in RS-485 mode the following has to be done: @@ -3263,7 +3262,7 @@ rs_write(struct tty_struct *tty, get_lsr_info(info, &val); }while (!(val & TIOCSER_TEMT)); - e100_rts(info, info->rs485.rts_after_sent); + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) e100_enable_rx(info); @@ -3678,14 +3677,52 @@ rs_ioctl(struct tty_struct *tty, struct file * file, #if defined(CONFIG_ETRAX_RS485) case TIOCSERSETRS485: { + /* In this ioctl we still use the old structure + * rs485_control for backward compatibility + * (if we use serial_rs485, then old user-level code + * wouldn't work anymore...). + * The use of this ioctl is deprecated: use TIOCSRS485 + * instead.*/ struct rs485_control rs485ctrl; + struct serial_rs485 rs485data; + printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n"); if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, sizeof(rs485ctrl))) return -EFAULT; - return e100_enable_rs485(tty, &rs485ctrl); + rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; + rs485data.flags = 0; + if (rs485ctrl.enabled) + rs485data.flags |= SER_RS485_ENABLED; + else + rs485data.flags &= ~(SER_RS485_ENABLED); + + if (rs485ctrl.rts_on_send) + rs485data.flags |= SER_RS485_RTS_ON_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_ON_SEND); + + if (rs485ctrl.rts_after_sent) + rs485data.flags |= SER_RS485_RTS_AFTER_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND); + + return e100_enable_rs485(tty, &rs485data); } + case TIOCSRS485: + { + /* This is the new version of TIOCSRS485, with new + * data structure serial_rs485 */ + struct serial_rs485 rs485data; + if (copy_from_user(&rs485data, (struct rs485_control *)arg, + sizeof(rs485data))) + return -EFAULT; + + return e100_enable_rs485(tty, &rs485data); + } + + case TIOCSERWRRS485: { struct rs485_write rs485wr; @@ -3827,8 +3864,8 @@ rs_close(struct tty_struct *tty, struct file * filp) /* port closed */ #if defined(CONFIG_ETRAX_RS485) - if (info->rs485.enabled) { - info->rs485.enabled = 0; + if (info->rs485.flags & SER_RS485_ENABLED) { + info->rs485.flags &= ~(SER_RS485_ENABLED); #if defined(CONFIG_ETRAX_RS485_ON_PA) *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); #endif @@ -4493,10 +4530,10 @@ rs_init(void) #if defined(CONFIG_ETRAX_RS485) /* Set sane defaults */ - info->rs485.rts_on_send = 0; - info->rs485.rts_after_sent = 1; + info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); + info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; info->rs485.delay_rts_before_send = 0; - info->rs485.enabled = 0; + info->rs485.flags &= ~(SER_RS485_ENABLED); #endif INIT_WORK(&info->work, do_softint);