X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=drivers%2Fspi%2Fspi_s3c24xx.c;h=21661c7959c87cab171323d8dc1821046ee77604;hb=efc491814308f89d5ef6c4fe19ae4552a67d4132;hp=0885cc357a371552dc2190a6da682f98a652abdb;hpb=0d34aa4d5a3e5d141bb4d07ed5d4bf02d4d4998a;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 0885cc357a3..21661c7959c 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -236,6 +236,19 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
+{
+	/* for the moment, permanently enable the clock */
+
+	clk_enable(hw->clk);
+
+	/* program defaults into the registers */
+
+	writeb(0xff, hw->regs + S3C2410_SPPRE);
+	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+}
+
 static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 {
 	struct s3c2410_spi_info *pdata;
@@ -270,6 +283,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 	/* setup the master state. */
 
 	master->num_chipselect = hw->pdata->num_cs;
+	master->bus_num = pdata->bus_num;
 
 	/* setup the state for the bitbang driver */
 
@@ -326,15 +340,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 		goto err_no_clk;
 	}
 
-	/* for the moment, permanently enable the clock */
-
-	clk_enable(hw->clk);
-
-	/* program defaults into the registers */
-
-	writeb(0xff, hw->regs + S3C2410_SPPRE);
-	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
-	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+	s3c24xx_spi_initialsetup(hw);
 
 	/* setup any gpio we can */
 
@@ -414,7 +420,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 {
 	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
-	clk_enable(hw->clk);
+	s3c24xx_spi_initialsetup(hw);
 	return 0;
 }