X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=include%2Flinux%2Fnl80211.h;h=cbe8ce3bf486121ca2cbaa49d9a1b022a766ff28;hb=be99ca4dd45b5ffc3ff30b2c80d7103aa1451afc;hp=7501acfcfdc436acbac15275c3a31348ac38ca6e;hpb=420e7fabd9c6d907280ed6b3e40eef425c5d8d8d;p=linux-2.6-omap-h63xx.git diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 7501acfcfdc..cbe8ce3bf48 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -47,7 +47,7 @@ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or - * %NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET. + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -72,8 +72,8 @@ * * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. - * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or - * %NL80211_ATTR_KEY_THRESHOLD. + * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, + * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER * attributes. @@ -84,7 +84,7 @@ * %NL80222_CMD_NEW_BEACON message) * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, - * %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes. + * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -113,6 +113,8 @@ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by * %NL80211_ATTR_IFINDEX. * + * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set + * regulatory domain. * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command * after being queried by the kernel. CRDA replies by sending a regulatory * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our @@ -133,6 +135,70 @@ * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX * + * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The + * interface is identified with %NL80211_ATTR_IFINDEX and the management + * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be + * added to the end of the specified management frame is specified with + * %NL80211_ATTR_IE. If the command succeeds, the requested data will be + * added to all specified management frames generated by + * kernel/firmware/driver. + * Note: This command has been removed and it is only reserved at this + * point to avoid re-using existing command number. The functionality this + * command was planned for has been provided with cleaner design with the + * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, + * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. + * + * @NL80211_CMD_GET_SCAN: get scan results + * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to + * NL80211_CMD_GET_SCAN and on the "scan" multicast group) + * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, + * partial scan results may be available + * + * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). + * + * @NL80211_CMD_AUTHENTICATE: authentication request and notification. + * This command is used both as a command (request to authenticate) and + * as an event on the "mlme" multicast group indicating completion of the + * authentication process. + * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used + * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE + * is used to specify the authentication type. %NL80211_ATTR_IE is used to + * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) + * to be added to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct + * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the + * MLME SAP interface (kernel providing MLME, userspace SME). The + * included NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication + * primitives). + * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like + * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to + * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -178,6 +244,22 @@ enum nl80211_commands { NL80211_CMD_GET_MESH_PARAMS, NL80211_CMD_SET_MESH_PARAMS, + NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, + + NL80211_CMD_GET_REG, + + NL80211_CMD_GET_SCAN, + NL80211_CMD_TRIGGER_SCAN, + NL80211_CMD_NEW_SCAN_RESULTS, + NL80211_CMD_SCAN_ABORTED, + + NL80211_CMD_REG_CHANGE, + + NL80211_CMD_AUTHENTICATE, + NL80211_CMD_ASSOCIATE, + NL80211_CMD_DEAUTHENTICATE, + NL80211_CMD_DISASSOCIATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -190,6 +272,12 @@ enum nl80211_commands { * here */ #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS +#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE +#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE +#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE +#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE +#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE +#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE /** * enum nl80211_attrs - nl80211 netlink attributes @@ -201,13 +289,13 @@ enum nl80211_commands { * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz - * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ + * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): - * NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including + * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including * this attribute) - * NL80211_SEC_CHAN_DISABLED = HT20 only - * NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel - * NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel + * NL80211_CHAN_HT20 = HT20 only + * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel + * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel * * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on * @NL80211_ATTR_IFNAME: network interface name @@ -284,6 +372,42 @@ enum nl80211_commands { * supported interface types, each a flag attribute with the number * of the interface mode. * + * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for + * %NL80211_CMD_SET_MGMT_EXTRA_IE. + * + * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with + * %NL80211_CMD_SET_MGMT_EXTRA_IE). + * + * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with + * a single scan request, a wiphy attribute. + * + * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) + * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive + * scanning and include a zero-length SSID (wildcard) for wildcard scan + * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the + * scan result list changes (BSS expired or added) so that applications + * can verify that they got a single, consistent snapshot (when all dump + * messages carried the same generation number) + * @NL80211_ATTR_BSS: scan result BSS + * + * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * + * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies + * an array of command numbers (i.e. a mapping index to command number) + * that the driver for the given wiphy supports. + * + * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header + * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and + * NL80211_CMD_ASSOCIATE events + * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, + * represented as a u32 + * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and + * %NL80211_CMD_DISASSOCIATE, u16 + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -344,7 +468,29 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_TXQ_PARAMS, NL80211_ATTR_WIPHY_FREQ, - NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, + + NL80211_ATTR_KEY_DEFAULT_MGMT, + + NL80211_ATTR_MGMT_SUBTYPE, + NL80211_ATTR_IE, + + NL80211_ATTR_MAX_NUM_SCAN_SSIDS, + + NL80211_ATTR_SCAN_FREQUENCIES, + NL80211_ATTR_SCAN_SSIDS, + NL80211_ATTR_SCAN_GENERATION, + NL80211_ATTR_BSS, + + NL80211_ATTR_REG_INITIATOR, + NL80211_ATTR_REG_TYPE, + + NL80211_ATTR_SUPPORTED_COMMANDS, + + NL80211_ATTR_FRAME, + NL80211_ATTR_SSID, + NL80211_ATTR_AUTH_TYPE, + NL80211_ATTR_REASON_CODE, /* add attributes here, update the policy in nl80211.c */ @@ -360,7 +506,15 @@ enum nl80211_attrs { #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ -#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET +#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE +#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE +#define NL80211_ATTR_IE NL80211_ATTR_IE +#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR +#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE +#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME +#define NL80211_ATTR_SSID NL80211_ATTR_SSID +#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE +#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -412,12 +566,14 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames * with short barker preamble * @NL80211_STA_FLAG_WME: station is WME/QoS capable + * @NL80211_STA_FLAG_MFP: station uses management frame protection */ enum nl80211_sta_flags { __NL80211_STA_FLAG_INVALID, NL80211_STA_FLAG_AUTHORIZED, NL80211_STA_FLAG_SHORT_PREAMBLE, NL80211_STA_FLAG_WME, + NL80211_STA_FLAG_MFP, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -465,6 +621,9 @@ enum nl80211_rate_info { * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_sta_info_txrate. + * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this + * station) */ enum nl80211_sta_info { __NL80211_STA_INFO_INVALID, @@ -476,6 +635,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_PLINK_STATE, NL80211_STA_INFO_SIGNAL, NL80211_STA_INFO_TX_BITRATE, + NL80211_STA_INFO_RX_PACKETS, + NL80211_STA_INFO_TX_PACKETS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -606,6 +767,48 @@ enum nl80211_bitrate_attr { NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 }; +/** + * enum nl80211_initiator - Indicates the initiator of a reg domain request + * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world + * regulatory domain. + * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the + * regulatory domain. + * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the + * wireless core it thinks its knows the regulatory domain we should be in. + * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an + * 802.11 country information element with regulatory information it + * thinks we should consider. + */ +enum nl80211_reg_initiator { + NL80211_REGDOM_SET_BY_CORE, + NL80211_REGDOM_SET_BY_USER, + NL80211_REGDOM_SET_BY_DRIVER, + NL80211_REGDOM_SET_BY_COUNTRY_IE, +}; + +/** + * enum nl80211_reg_type - specifies the type of regulatory domain + * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains + * to a specific country. When this is set you can count on the + * ISO / IEC 3166 alpha2 country code being valid. + * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory + * domain. + * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. + * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product + * of an intersection between two regulatory domains -- the previously + * set regulatory domain on the system and the last accepted regulatory + * domain request to be processed. + */ +enum nl80211_reg_type { + NL80211_REGDOM_TYPE_COUNTRY, + NL80211_REGDOM_TYPE_WORLD, + NL80211_REGDOM_TYPE_CUSTOM_WORLD, + NL80211_REGDOM_TYPE_INTERSECTION, +}; + /** * enum nl80211_reg_rule_attr - regulatory rule attributes * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional @@ -805,10 +1008,58 @@ enum nl80211_txq_q { NL80211_TXQ_Q_BK }; -enum nl80211_sec_chan_offset { - NL80211_SEC_CHAN_NO_HT /* No HT */, - NL80211_SEC_CHAN_DISABLED /* HT20 only */, - NL80211_SEC_CHAN_BELOW /* HT40- */, - NL80211_SEC_CHAN_ABOVE /* HT40+ */ +enum nl80211_channel_type { + NL80211_CHAN_NO_HT, + NL80211_CHAN_HT20, + NL80211_CHAN_HT40MINUS, + NL80211_CHAN_HT40PLUS +}; + +/** + * enum nl80211_bss - netlink attributes for a BSS + * + * @__NL80211_BSS_INVALID: invalid + * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) + * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) + * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) + * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) + * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the + * raw information elements from the probe response/beacon (bin) + * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon + * in mBm (100 * dBm) (s32) + * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon + * in unspecified units, scaled to 0..100 (u8) + * @__NL80211_BSS_AFTER_LAST: internal + * @NL80211_BSS_MAX: highest BSS attribute + */ +enum nl80211_bss { + __NL80211_BSS_INVALID, + NL80211_BSS_BSSID, + NL80211_BSS_FREQUENCY, + NL80211_BSS_TSF, + NL80211_BSS_BEACON_INTERVAL, + NL80211_BSS_CAPABILITY, + NL80211_BSS_INFORMATION_ELEMENTS, + NL80211_BSS_SIGNAL_MBM, + NL80211_BSS_SIGNAL_UNSPEC, + + /* keep last */ + __NL80211_BSS_AFTER_LAST, + NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_auth_type - AuthenticationType + * + * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication + * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) + * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) + * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + */ +enum nl80211_auth_type { + NL80211_AUTHTYPE_OPEN_SYSTEM, + NL80211_AUTHTYPE_SHARED_KEY, + NL80211_AUTHTYPE_FT, + NL80211_AUTHTYPE_NETWORK_EAP, }; #endif /* __LINUX_NL80211_H */