X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=include%2Flinux%2Fusb.h;h=5fc8ff73b7bbcd445ff7425f0cf459d94f08802e;hb=57d3ae847d4403c5e4a35ae5f38665fff1a94c02;hp=105e3e9362d04482c23c7d7d2206b518354f2814;hpb=5b653c79c04c6b152b8dc7d18f8c8a7f77f4b235;p=linux-2.6-omap-h63xx.git

diff --git a/include/linux/usb.h b/include/linux/usb.h
index 105e3e9362d..5fc8ff73b7b 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -52,6 +52,7 @@ struct ep_device;
  * @ep_dev: ep_device for sysfs info
  * @extra: descriptors following this endpoint in the configuration
  * @extralen: how many bytes of "extra" are valid
+ * @enabled: URBs may be submitted to this endpoint
  *
  * USB requests are always queued to a given endpoint, identified by a
  * descriptor within an active interface in a given USB configuration.
@@ -64,6 +65,7 @@ struct usb_host_endpoint {
 
 	unsigned char *extra;   /* Extra descriptors */
 	int extralen;
+	int enabled;
 };
 
 /* host-side wrapper for one interface setting's parsed descriptors */
@@ -105,6 +107,7 @@ enum usb_interface_condition {
  * @condition: binding state of the interface: not bound, binding
  *	(in probe()), bound to a driver, or unbinding (in disconnect())
  * @is_active: flag set when the interface is bound and not suspended.
+ * @sysfs_files_created: sysfs attributes exist
  * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
  *	capability during autosuspend.
  * @dev: driver model's view of this device
@@ -155,6 +158,7 @@ struct usb_interface {
 					 * bound to */
 	enum usb_interface_condition condition;		/* state of binding */
 	unsigned is_active:1;		/* the interface is not suspended */
+	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
 	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
 
 	struct device dev;		/* interface specific device info */
@@ -344,6 +348,11 @@ struct usb_tt;
  *
  * Usbcore drivers should not set usbdev->state directly.  Instead use
  * usb_set_device_state().
+ *
+ * @authorized: (user space) policy determines if we authorize this
+ *              device to be used or not. By default, wired USB
+ *              devices are authorized. WUSB devices are not, until we
+ *              authorize them from user space. FIXME -- complete doc
  */
 struct usb_device {
 	int		devnum;		/* Address on USB bus */
@@ -376,8 +385,11 @@ struct usb_device {
 	u8 portnum;			/* Parent port number (origin 1) */
 	u8 level;			/* Number of USB hub ancestors */
 
+	unsigned can_submit:1;		/* URBs may be submitted */
 	unsigned discon_suspended:1;	/* Disconnected while suspended */
 	unsigned have_langid:1;		/* whether string_langid is valid */
+	unsigned authorized:1;		/* Policy has determined we can use it */
+	unsigned wusb:1;		/* Device is Wireless USB */
 	int string_langid;		/* language ID for strings */
 
 	/* static strings from the device */
@@ -405,6 +417,7 @@ struct usb_device {
 
 	int pm_usage_cnt;		/* usage counter for autosuspend */
 	u32 quirks;			/* quirks of the whole device */
+	atomic_t urbnum;		/* number of URBs submitted for the whole device */
 
 #ifdef CONFIG_PM
 	struct delayed_work autosuspend; /* for delayed autosuspends */
@@ -419,6 +432,7 @@ struct usb_device {
 	unsigned persist_enabled:1;	/* USB_PERSIST enabled for this dev */
 	unsigned autosuspend_disabled:1; /* autosuspend and autoresume */
 	unsigned autoresume_disabled:1;  /*  disabled by the user */
+	unsigned skip_sys_resume:1;	/* skip the next system resume */
 #endif
 };
 #define	to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -1019,6 +1033,8 @@ extern int usb_disabled(void);
 
 /*
  * urb->transfer_flags:
+ *
+ * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
  */
 #define URB_SHORT_NOT_OK	0x0001	/* report short reads as errors */
 #define URB_ISO_ASAP		0x0002	/* iso-only, urb->start_frame
@@ -1031,6 +1047,10 @@ extern int usb_disabled(void);
 					 * needed */
 #define URB_FREE_BUFFER		0x0100	/* Free transfer buffer with the URB */
 
+#define URB_DIR_IN		0x0200	/* Transfer from device to host */
+#define URB_DIR_OUT		0
+#define URB_DIR_MASK		URB_DIR_IN
+
 struct usb_iso_packet_descriptor {
 	unsigned int offset;
 	unsigned int length;		/* expected length */
@@ -1226,10 +1246,10 @@ struct urb
 {
 	/* private: usb core and host controller only fields in the urb */
 	struct kref kref;		/* reference count of the URB */
-	spinlock_t lock;		/* lock for the URB */
 	void *hcpriv;			/* private data for host controller */
 	atomic_t use_count;		/* concurrent submissions counter */
 	u8 reject;			/* submissions will fail */
+	int unlinked;			/* unlink error code */
 
 	/* public: documented fields in the urb that can be used by drivers */
 	struct list_head urb_list;	/* list head for use by the urb's
@@ -1283,7 +1303,6 @@ static inline void usb_fill_control_urb (struct urb *urb,
 					 usb_complete_t complete_fn,
 					 void *context)
 {
-	spin_lock_init(&urb->lock);
 	urb->dev = dev;
 	urb->pipe = pipe;
 	urb->setup_packet = setup_packet;
@@ -1314,7 +1333,6 @@ static inline void usb_fill_bulk_urb (struct urb *urb,
 				      usb_complete_t complete_fn,
 				      void *context)
 {
-	spin_lock_init(&urb->lock);
 	urb->dev = dev;
 	urb->pipe = pipe;
 	urb->transfer_buffer = transfer_buffer;
@@ -1350,7 +1368,6 @@ static inline void usb_fill_int_urb (struct urb *urb,
 				     void *context,
 				     int interval)
 {
-	spin_lock_init(&urb->lock);
 	urb->dev = dev;
 	urb->pipe = pipe;
 	urb->transfer_buffer = transfer_buffer;
@@ -1378,6 +1395,30 @@ extern void usb_unanchor_urb(struct urb *urb);
 extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
 					 unsigned int timeout);
 
+/**
+ * usb_urb_dir_in - check if an URB describes an IN transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an IN transfer (device-to-host),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_in(struct urb *urb)
+{
+	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN;
+}
+
+/**
+ * usb_urb_dir_out - check if an URB describes an OUT transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an OUT transfer (host-to-device),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_out(struct urb *urb)
+{
+	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
+}
+
 void *usb_buffer_alloc (struct usb_device *dev, size_t size,
 	gfp_t mem_flags, dma_addr_t *dma);
 void usb_buffer_free (struct usb_device *dev, size_t size,
@@ -1390,13 +1431,13 @@ void usb_buffer_unmap (struct urb *urb);
 #endif
 
 struct scatterlist;
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
 		      struct scatterlist *sg, int nents);
 #if 0
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
 			   struct scatterlist *sg, int n_hw_ents);
 #endif
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
 			 struct scatterlist *sg, int n_hw_ents);
 
 /*-------------------------------------------------------------------*