X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=include%2Fmedia%2Fv4l2-common.h;h=181a40c46a52d866f5c1d3cb83cdbfeeea0387c1;hb=10d226722c1a627512704e3f57e952b2f73b3fe4;hp=91b19921f958af283e5fc78521847c5b7785ca3c;hpb=659dba34807692a6ebd55e7859dff2c7cb1b005d;p=linux-2.6-omap-h63xx.git

diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 91b19921f95..181a40c46a5 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -64,9 +64,6 @@
 /* Prints the ioctl in a human-readable format */
 extern void v4l_printk_ioctl(unsigned int cmd);
 
-/* Prints the ioctl and arg in a human-readable format */
-extern void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg);
-
 /* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
 #define v4l_print_ioctl(name, cmd)  		 \
 	do {  					 \
@@ -97,14 +94,17 @@ u32 v4l2_ctrl_next(const u32 * const *ctrl_classes, u32 id);
 
 /* ------------------------------------------------------------------------- */
 
-/* Internal ioctls */
+/* Register/chip ident helper function */
 
-/* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */
-struct v4l2_register {
-	u32 i2c_id; 		/* I2C driver ID of the I2C chip. 0 for the I2C adapter. */
-	unsigned long reg;
-	u32 val;
-};
+struct i2c_client; /* forward reference */
+int v4l2_chip_match_i2c_client(struct i2c_client *c, u32 id_type, u32 chip_id);
+int v4l2_chip_ident_i2c_client(struct i2c_client *c, struct v4l2_chip_ident *chip,
+		u32 ident, u32 revision);
+int v4l2_chip_match_host(u32 id_type, u32 chip_id);
+
+/* ------------------------------------------------------------------------- */
+
+/* Internal ioctls */
 
 /* VIDIOC_INT_DECODE_VBI_LINE */
 struct v4l2_decode_vbi_line {
@@ -116,39 +116,6 @@ struct v4l2_decode_vbi_line {
 	u32 type;		/* VBI service type (V4L2_SLICED_*). 0 if no service found */
 };
 
-/* VIDIOC_INT_G_CHIP_IDENT: identifies the actual chip installed on the board */
-enum v4l2_chip_ident {
-	/* general idents: reserved range 0-49 */
-	V4L2_IDENT_UNKNOWN = 0,
-
-	/* module saa7110: just ident= 100 */
-	V4L2_IDENT_SAA7110 = 100,
-
-	/* module saa7111: just ident= 101 */
-	V4L2_IDENT_SAA7111 = 101,
-
-	/* module saa7115: reserved range 102-149 */
-	V4L2_IDENT_SAA7113 = 103,
-	V4L2_IDENT_SAA7114 = 104,
-	V4L2_IDENT_SAA7115 = 105,
-	V4L2_IDENT_SAA7118 = 108,
-
-	/* module saa7127: reserved range 150-199 */
-	V4L2_IDENT_SAA7127 = 157,
-	V4L2_IDENT_SAA7129 = 159,
-
-	/* module cx25840: reserved range 200-249 */
-	V4L2_IDENT_CX25836 = 236,
-	V4L2_IDENT_CX25837 = 237,
-	V4L2_IDENT_CX25840 = 240,
-	V4L2_IDENT_CX25841 = 241,
-	V4L2_IDENT_CX25842 = 242,
-	V4L2_IDENT_CX25843 = 243,
-
-	/* OmniVision sensors - range 250-299 */
-	V4L2_IDENT_OV7670 = 250,
-};
-
 /* audio ioctls */
 
 /* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */
@@ -175,9 +142,7 @@ enum v4l2_chip_ident {
    Replacement of TUNER_SET_STANDBY. */
 #define VIDIOC_INT_S_STANDBY 	     _IOW('d', 94, u32)
 
-/* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
-#define	VIDIOC_INT_S_REGISTER 		_IOW ('d', 100, struct v4l2_register)
-#define	VIDIOC_INT_G_REGISTER 		_IOWR('d', 101, struct v4l2_register)
+/* 100, 101 used by  VIDIOC_DBG_[SG]_REGISTER */
 
 /* Generic reset command. The argument selects which subsystems to reset.
    Passing 0 will always reset the whole chip. */
@@ -212,10 +177,6 @@ enum v4l2_chip_ident {
    whether CC data from the first or second field should be obtained). */
 #define VIDIOC_INT_G_VBI_DATA 		_IOWR('d', 106, struct v4l2_sliced_vbi_data)
 
-/* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can
-   be made. */
-#define VIDIOC_INT_G_CHIP_IDENT		_IOR ('d', 107, enum v4l2_chip_ident)
-
 /* Sets I2S speed in bps. This is used to provide a standard way to select I2S
    clock used by driving digital audio streams at some board designs.
    Usual values for the frequency are 1024000 and 2048000.
@@ -258,4 +219,12 @@ struct v4l2_crystal_freq {
    default values. */
 #define VIDIOC_INT_INIT			_IOW ('d', 114, u32)
 
+/* Set v4l2_std_id for video OUTPUT devices. This is ignored by
+   video input devices. */
+#define VIDIOC_INT_S_STD_OUTPUT		_IOW  ('d', 115, v4l2_std_id)
+
+/* Get v4l2_std_id for video OUTPUT devices. This is ignored by
+   video input devices. */
+#define VIDIOC_INT_G_STD_OUTPUT		_IOW  ('d', 116, v4l2_std_id)
+
 #endif /* V4L2_COMMON_H_ */