X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=init%2Fcalibrate.c;h=a379c9061199c64368936a88f91353992a4d5f92;hb=c59765042f53a79a7a65585042ff463b69cb248c;hp=2d3d73bd4ce13b18dcbe6d9ebd63efe1cd70c073;hpb=bfe8df3d314bddf30758bd738e0087e80964760c;p=linux-2.6-omap-h63xx.git

diff --git a/init/calibrate.c b/init/calibrate.c
index 2d3d73bd4ce..a379c906119 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -7,9 +7,10 @@
 #include <linux/jiffies.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/smp.h>
 
-#include <asm/timex.h>
-
+unsigned long lpj_fine;
 unsigned long preset_lpj;
 static int __init lpj_setup(char *str)
 {
@@ -29,14 +30,14 @@ __setup("lpj=", lpj_setup);
 #define DELAY_CALIBRATION_TICKS			((HZ < 100) ? 1 : (HZ/100))
 #define MAX_DIRECT_CALIBRATION_RETRIES		5
 
-static unsigned long __devinit calibrate_delay_direct(void)
+static unsigned long __cpuinit calibrate_delay_direct(void)
 {
 	unsigned long pre_start, start, post_start;
 	unsigned long pre_end, end, post_end;
 	unsigned long start_jiffies;
-	unsigned long tsc_rate_min, tsc_rate_max;
-	unsigned long good_tsc_sum = 0;
-	unsigned long good_tsc_count = 0;
+	unsigned long timer_rate_min, timer_rate_max;
+	unsigned long good_timer_sum = 0;
+	unsigned long good_timer_count = 0;
 	int i;
 
 	if (read_current_timer(&pre_start) < 0 )
@@ -80,59 +81,65 @@ static unsigned long __devinit calibrate_delay_direct(void)
 		}
 		read_current_timer(&post_end);
 
-		tsc_rate_max = (post_end - pre_start) / DELAY_CALIBRATION_TICKS;
-		tsc_rate_min = (pre_end - post_start) / DELAY_CALIBRATION_TICKS;
+		timer_rate_max = (post_end - pre_start) /
+					DELAY_CALIBRATION_TICKS;
+		timer_rate_min = (pre_end - post_start) /
+					DELAY_CALIBRATION_TICKS;
 
 		/*
-	 	 * If the upper limit and lower limit of the tsc_rate is
+		 * If the upper limit and lower limit of the timer_rate is
 		 * >= 12.5% apart, redo calibration.
 		 */
 		if (pre_start != 0 && pre_end != 0 &&
-		    (tsc_rate_max - tsc_rate_min) < (tsc_rate_max >> 3)) {
-			good_tsc_count++;
-			good_tsc_sum += tsc_rate_max;
+		    (timer_rate_max - timer_rate_min) < (timer_rate_max >> 3)) {
+			good_timer_count++;
+			good_timer_sum += timer_rate_max;
 		}
 	}
 
-	if (good_tsc_count)
-		return (good_tsc_sum/good_tsc_count);
+	if (good_timer_count)
+		return (good_timer_sum/good_timer_count);
 
 	printk(KERN_WARNING "calibrate_delay_direct() failed to get a good "
 	       "estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n");
 	return 0;
 }
 #else
-static unsigned long __devinit calibrate_delay_direct(void) {return 0;}
+static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;}
 #endif
 
 /*
  * This is the number of bits of precision for the loops_per_jiffy.  Each
  * bit takes on average 1.5/HZ seconds.  This (like the original) is a little
  * better than 1%
+ * For the boot cpu we can skip the delay calibration and assign it a value
+ * calculated based on the timer frequency.
+ * For the rest of the CPUs we cannot assume that the timer frequency is same as
+ * the cpu frequency, hence do the calibration for those.
  */
 #define LPS_PREC 8
 
-void __devinit calibrate_delay(void)
+void __cpuinit calibrate_delay(void)
 {
 	unsigned long ticks, loopbit;
 	int lps_precision = LPS_PREC;
 
 	if (preset_lpj) {
 		loops_per_jiffy = preset_lpj;
-		printk("Calibrating delay loop (skipped)... "
-			"%lu.%02lu BogoMIPS preset\n",
-			loops_per_jiffy/(500000/HZ),
-			(loops_per_jiffy/(5000/HZ)) % 100);
+		printk(KERN_INFO
+			"Calibrating delay loop (skipped) preset value.. ");
+	} else if ((smp_processor_id() == 0) && lpj_fine) {
+		loops_per_jiffy = lpj_fine;
+		printk(KERN_INFO
+			"Calibrating delay loop (skipped), "
+			"value calculated using timer frequency.. ");
 	} else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) {
-		printk("Calibrating delay using timer specific routine.. ");
-		printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
-			loops_per_jiffy/(500000/HZ),
-			(loops_per_jiffy/(5000/HZ)) % 100,
-			loops_per_jiffy);
+		printk(KERN_INFO
+			"Calibrating delay using timer specific routine.. ");
 	} else {
 		loops_per_jiffy = (1<<12);
 
-		printk(KERN_DEBUG "Calibrating delay loop... ");
+		printk(KERN_INFO "Calibrating delay loop... ");
 		while ((loops_per_jiffy <<= 1) != 0) {
 			/* wait for "start of" clock tick */
 			ticks = jiffies;
@@ -162,12 +169,8 @@ void __devinit calibrate_delay(void)
 			if (jiffies != ticks)	/* longer than 1 tick */
 				loops_per_jiffy &= ~loopbit;
 		}
-
-		/* Round the value and print it */
-		printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
-			loops_per_jiffy/(500000/HZ),
-			(loops_per_jiffy/(5000/HZ)) % 100,
-			loops_per_jiffy);
 	}
-
+	printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+			loops_per_jiffy/(500000/HZ),
+			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
 }