X-Git-Url: http://pilppa.org/gitweb/?a=blobdiff_plain;f=net%2Fwireless%2Freg.c;h=592b2e391d42085686dc3a461b7bae61c05cc5d2;hb=b8295acdc323e6e383ec822fc1e95edeb9148513;hp=855bff4b3250a0eb04b094b5fca6c5512ecb35b1;hpb=1b8ba39a3fad9c58532f6dad12c94d6e675be656;p=linux-2.6-omap-h63xx.git diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 855bff4b325..845e2d32663 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2,179 +2,936 @@ * Copyright 2002-2005, Instant802 Networks, Inc. * Copyright 2005-2006, Devicescape Software, Inc. * Copyright 2007 Johannes Berg + * Copyright 2008 Luis R. Rodriguez * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/* - * This regulatory domain control implementation is highly incomplete, it - * only exists for the purpose of not regressing mac80211. - * - * For now, drivers can restrict the set of allowed channels by either - * not registering those channels or setting the IEEE80211_CHAN_DISABLED - * flag; that flag will only be *set* by this code, never *cleared. +/** + * DOC: Wireless regulatory infrastructure * * The usual implementation is for a driver to read a device EEPROM to * determine which regulatory domain it should be operating under, then * looking up the allowable channels in a driver-local table and finally * registering those channels in the wiphy structure. * - * Alternatively, drivers that trust the regulatory domain control here - * will register a complete set of capabilities and the control code - * will restrict the set by setting the IEEE80211_CHAN_* flags. + * Another set of compliance enforcement is for drivers to use their + * own compliance limits which can be stored on the EEPROM. The host + * driver or firmware may ensure these are used. + * + * In addition to all this we provide an extra layer of regulatory + * conformance. For drivers which do not have any regulatory + * information CRDA provides the complete regulatory solution. + * For others it provides a community effort on further restrictions + * to enhance compliance. + * + * Note: When number of rules --> infinity we will not be able to + * index on alpha2 any more, instead we'll probably have to + * rely on some SHA1 checksum of the regdomain for example. + * */ #include +#include +#include +#include +#include #include +#include #include "core.h" +#include "reg.h" -static char *ieee80211_regdom = "US"; -module_param(ieee80211_regdom, charp, 0444); -MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); +/** + * struct regulatory_request - receipt of last regulatory request + * + * @wiphy: this is set if this request's initiator is + * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This + * can be used by the wireless core to deal with conflicts + * and potentially inform users of which devices specifically + * cased the conflicts. + * @initiator: indicates who sent this request, could be any of + * of those set in reg_set_by, %REGDOM_SET_BY_* + * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested + * regulatory domain. We have a few special codes: + * 00 - World regulatory domain + * 99 - built by driver but a specific alpha2 cannot be determined + * 98 - result of an intersection between two regulatory domains + * @intersect: indicates whether the wireless core should intersect + * the requested regulatory domain with the presently set regulatory + * domain. + */ +struct regulatory_request { + struct wiphy *wiphy; + enum reg_set_by initiator; + char alpha2[2]; + bool intersect; +}; + +/* Receipt of information from last regulatory request */ +static struct regulatory_request *last_request; -struct ieee80211_channel_range { - short start_freq; - short end_freq; - int max_power; - int max_antenna_gain; - u32 flags; +/* To trigger userspace events */ +static struct platform_device *reg_pdev; + +/* Keep the ordering from large to small */ +static u32 supported_bandwidths[] = { + MHZ_TO_KHZ(40), + MHZ_TO_KHZ(20), }; -struct ieee80211_regdomain { - const char *code; - const struct ieee80211_channel_range *ranges; - int n_ranges; +/* Central wireless core regulatory domains, we only need two, + * the current one and a world regulatory domain in case we have no + * information to give us an alpha2 */ +static const struct ieee80211_regdomain *cfg80211_regdomain; + +/* We keep a static world regulatory domain in case of the absence of CRDA */ +static const struct ieee80211_regdomain world_regdom = { + .n_reg_rules = 1, + .alpha2 = "00", + .reg_rules = { + REG_RULE(2412-10, 2462+10, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN | + NL80211_RRF_NO_IBSS), + } }; -#define RANGE_PWR(_start, _end, _pwr, _ag, _flags) \ - { _start, _end, _pwr, _ag, _flags } +static const struct ieee80211_regdomain *cfg80211_world_regdom = + &world_regdom; +#ifdef CONFIG_WIRELESS_OLD_REGULATORY +static char *ieee80211_regdom = "US"; +module_param(ieee80211_regdom, charp, 0444); +MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); -/* - * Ideally, in the future, these definitions will be loaded from a - * userspace table via some daemon. - */ -static const struct ieee80211_channel_range ieee80211_US_channels[] = { - /* IEEE 802.11b/g, channels 1..11 */ - RANGE_PWR(2412, 2462, 27, 6, 0), - /* IEEE 802.11a, channel 36*/ - RANGE_PWR(5180, 5180, 23, 6, 0), - /* IEEE 802.11a, channel 40*/ - RANGE_PWR(5200, 5200, 23, 6, 0), - /* IEEE 802.11a, channel 44*/ - RANGE_PWR(5220, 5220, 23, 6, 0), - /* IEEE 802.11a, channels 48..64 */ - RANGE_PWR(5240, 5320, 23, 6, 0), - /* IEEE 802.11a, channels 149..165, outdoor */ - RANGE_PWR(5745, 5825, 30, 6, 0), -}; +/* We assume 40 MHz bandwidth for the old regulatory work. + * We make emphasis we are using the exact same frequencies + * as before */ -static const struct ieee80211_channel_range ieee80211_JP_channels[] = { - /* IEEE 802.11b/g, channels 1..14 */ - RANGE_PWR(2412, 2484, 20, 6, 0), - /* IEEE 802.11a, channels 34..48 */ - RANGE_PWR(5170, 5240, 20, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channels 52..64 */ - RANGE_PWR(5260, 5320, 20, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), +static const struct ieee80211_regdomain us_regdom = { + .n_reg_rules = 6, + .alpha2 = "US", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..11 */ + REG_RULE(2412-10, 2462+10, 40, 6, 27, 0), + /* IEEE 802.11a, channel 36 */ + REG_RULE(5180-10, 5180+10, 40, 6, 23, 0), + /* IEEE 802.11a, channel 40 */ + REG_RULE(5200-10, 5200+10, 40, 6, 23, 0), + /* IEEE 802.11a, channel 44 */ + REG_RULE(5220-10, 5220+10, 40, 6, 23, 0), + /* IEEE 802.11a, channels 48..64 */ + REG_RULE(5240-10, 5320+10, 40, 6, 23, 0), + /* IEEE 802.11a, channels 149..165, outdoor */ + REG_RULE(5745-10, 5825+10, 40, 6, 30, 0), + } }; -static const struct ieee80211_channel_range ieee80211_EU_channels[] = { - /* IEEE 802.11b/g, channels 1..13 */ - RANGE_PWR(2412, 2472, 20, 6, 0), - /* IEEE 802.11a, channel 36*/ - RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channel 40*/ - RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channel 44*/ - RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), - /* IEEE 802.11a, channels 48..64 */ - RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), - /* IEEE 802.11a, channels 100..140 */ - RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_RADAR), +static const struct ieee80211_regdomain jp_regdom = { + .n_reg_rules = 3, + .alpha2 = "JP", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..14 */ + REG_RULE(2412-10, 2484+10, 40, 6, 20, 0), + /* IEEE 802.11a, channels 34..48 */ + REG_RULE(5170-10, 5240+10, 40, 6, 20, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channels 52..64 */ + REG_RULE(5260-10, 5320+10, 40, 6, 20, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + } }; -#define REGDOM(_code) \ - { \ - .code = __stringify(_code), \ - .ranges = ieee80211_ ##_code## _channels, \ - .n_ranges = ARRAY_SIZE(ieee80211_ ##_code## _channels), \ +static const struct ieee80211_regdomain eu_regdom = { + .n_reg_rules = 6, + /* This alpha2 is bogus, we leave it here just for stupid + * backward compatibility */ + .alpha2 = "EU", + .reg_rules = { + /* IEEE 802.11b/g, channels 1..13 */ + REG_RULE(2412-10, 2472+10, 40, 6, 20, 0), + /* IEEE 802.11a, channel 36 */ + REG_RULE(5180-10, 5180+10, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channel 40 */ + REG_RULE(5200-10, 5200+10, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channel 44 */ + REG_RULE(5220-10, 5220+10, 40, 6, 23, + NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11a, channels 48..64 */ + REG_RULE(5240-10, 5320+10, 40, 6, 20, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), + /* IEEE 802.11a, channels 100..140 */ + REG_RULE(5500-10, 5700+10, 40, 6, 30, + NL80211_RRF_NO_IBSS | + NL80211_RRF_DFS), } - -static const struct ieee80211_regdomain ieee80211_regdoms[] = { - REGDOM(US), - REGDOM(JP), - REGDOM(EU), }; +static const struct ieee80211_regdomain *static_regdom(char *alpha2) +{ + if (alpha2[0] == 'U' && alpha2[1] == 'S') + return &us_regdom; + if (alpha2[0] == 'J' && alpha2[1] == 'P') + return &jp_regdom; + if (alpha2[0] == 'E' && alpha2[1] == 'U') + return &eu_regdom; + /* Default, as per the old rules */ + return &us_regdom; +} -static const struct ieee80211_regdomain *get_regdom(void) +static bool is_old_static_regdom(const struct ieee80211_regdomain *rd) { - static const struct ieee80211_channel_range - ieee80211_world_channels[] = { - /* IEEE 802.11b/g, channels 1..11 */ - RANGE_PWR(2412, 2462, 27, 6, 0), + if (rd == &us_regdom || rd == &jp_regdom || rd == &eu_regdom) + return true; + return false; +} +#else +static inline bool is_old_static_regdom(const struct ieee80211_regdomain *rd) +{ + return false; +} +#endif + +static void reset_regdomains(void) +{ + /* avoid freeing static information or freeing something twice */ + if (cfg80211_regdomain == cfg80211_world_regdom) + cfg80211_regdomain = NULL; + if (cfg80211_world_regdom == &world_regdom) + cfg80211_world_regdom = NULL; + if (cfg80211_regdomain == &world_regdom) + cfg80211_regdomain = NULL; + if (is_old_static_regdom(cfg80211_regdomain)) + cfg80211_regdomain = NULL; + + kfree(cfg80211_regdomain); + kfree(cfg80211_world_regdom); + + cfg80211_world_regdom = &world_regdom; + cfg80211_regdomain = NULL; +} + +/* Dynamic world regulatory domain requested by the wireless + * core upon initialization */ +static void update_world_regdomain(const struct ieee80211_regdomain *rd) +{ + BUG_ON(!last_request); + + reset_regdomains(); + + cfg80211_world_regdom = rd; + cfg80211_regdomain = rd; +} + +bool is_world_regdom(const char *alpha2) +{ + if (!alpha2) + return false; + if (alpha2[0] == '0' && alpha2[1] == '0') + return true; + return false; +} + +static bool is_alpha2_set(const char *alpha2) +{ + if (!alpha2) + return false; + if (alpha2[0] != 0 && alpha2[1] != 0) + return true; + return false; +} + +static bool is_alpha_upper(char letter) +{ + /* ASCII A - Z */ + if (letter >= 65 && letter <= 90) + return true; + return false; +} + +static bool is_unknown_alpha2(const char *alpha2) +{ + if (!alpha2) + return false; + /* Special case where regulatory domain was built by driver + * but a specific alpha2 cannot be determined */ + if (alpha2[0] == '9' && alpha2[1] == '9') + return true; + return false; +} + +static bool is_an_alpha2(const char *alpha2) +{ + if (!alpha2) + return false; + if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1])) + return true; + return false; +} + +static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) +{ + if (!alpha2_x || !alpha2_y) + return false; + if (alpha2_x[0] == alpha2_y[0] && + alpha2_x[1] == alpha2_y[1]) + return true; + return false; +} + +static bool regdom_changed(const char *alpha2) +{ + if (!cfg80211_regdomain) + return true; + if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + return false; + return true; +} + +/* This lets us keep regulatory code which is updated on a regulatory + * basis in userspace. */ +static int call_crda(const char *alpha2) +{ + char country_env[9 + 2] = "COUNTRY="; + char *envp[] = { + country_env, + NULL }; - static const struct ieee80211_regdomain regdom_world = REGDOM(world); - int i; - for (i = 0; i < ARRAY_SIZE(ieee80211_regdoms); i++) - if (strcmp(ieee80211_regdom, ieee80211_regdoms[i].code) == 0) - return &ieee80211_regdoms[i]; + if (!is_world_regdom((char *) alpha2)) + printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n", + alpha2[0], alpha2[1]); + else + printk(KERN_INFO "cfg80211: Calling CRDA to update world " + "regulatory domain\n"); + + country_env[8] = alpha2[0]; + country_env[9] = alpha2[1]; + + return kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, envp); +} + +/* Used by nl80211 before kmalloc'ing our regulatory domain */ +bool reg_is_valid_request(const char *alpha2) +{ + if (!last_request) + return false; + + return alpha2_equal(last_request->alpha2, alpha2); +} + +/* Sanity check on a regulatory rule */ +static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) +{ + const struct ieee80211_freq_range *freq_range = &rule->freq_range; + u32 freq_diff; + + if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0) + return false; + + if (freq_range->start_freq_khz > freq_range->end_freq_khz) + return false; + + freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; + + if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff) + return false; + + return true; +} + +static bool is_valid_rd(const struct ieee80211_regdomain *rd) +{ + const struct ieee80211_reg_rule *reg_rule = NULL; + unsigned int i; + + if (!rd->n_reg_rules) + return false; + + for (i = 0; i < rd->n_reg_rules; i++) { + reg_rule = &rd->reg_rules[i]; + if (!is_valid_reg_rule(reg_rule)) + return false; + } + + return true; +} + +/* Returns value in KHz */ +static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, + u32 freq) +{ + unsigned int i; + for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) { + u32 start_freq_khz = freq - supported_bandwidths[i]/2; + u32 end_freq_khz = freq + supported_bandwidths[i]/2; + if (start_freq_khz >= freq_range->start_freq_khz && + end_freq_khz <= freq_range->end_freq_khz) + return supported_bandwidths[i]; + } + return 0; +} + +/* Helper for regdom_intersect(), this does the real + * mathematical intersection fun */ +static int reg_rules_intersect( + const struct ieee80211_reg_rule *rule1, + const struct ieee80211_reg_rule *rule2, + struct ieee80211_reg_rule *intersected_rule) +{ + const struct ieee80211_freq_range *freq_range1, *freq_range2; + struct ieee80211_freq_range *freq_range; + const struct ieee80211_power_rule *power_rule1, *power_rule2; + struct ieee80211_power_rule *power_rule; + u32 freq_diff; + + freq_range1 = &rule1->freq_range; + freq_range2 = &rule2->freq_range; + freq_range = &intersected_rule->freq_range; + + power_rule1 = &rule1->power_rule; + power_rule2 = &rule2->power_rule; + power_rule = &intersected_rule->power_rule; + + freq_range->start_freq_khz = max(freq_range1->start_freq_khz, + freq_range2->start_freq_khz); + freq_range->end_freq_khz = min(freq_range1->end_freq_khz, + freq_range2->end_freq_khz); + freq_range->max_bandwidth_khz = min(freq_range1->max_bandwidth_khz, + freq_range2->max_bandwidth_khz); + + freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; + if (freq_range->max_bandwidth_khz > freq_diff) + freq_range->max_bandwidth_khz = freq_diff; + + power_rule->max_eirp = min(power_rule1->max_eirp, + power_rule2->max_eirp); + power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain, + power_rule2->max_antenna_gain); + + intersected_rule->flags = (rule1->flags | rule2->flags); + + if (!is_valid_reg_rule(intersected_rule)) + return -EINVAL; + + return 0; +} + +/** + * regdom_intersect - do the intersection between two regulatory domains + * @rd1: first regulatory domain + * @rd2: second regulatory domain + * + * Use this function to get the intersection between two regulatory domains. + * Once completed we will mark the alpha2 for the rd as intersected, "98", + * as no one single alpha2 can represent this regulatory domain. + * + * Returns a pointer to the regulatory domain structure which will hold the + * resulting intersection of rules between rd1 and rd2. We will + * kzalloc() this structure for you. + */ +static struct ieee80211_regdomain *regdom_intersect( + const struct ieee80211_regdomain *rd1, + const struct ieee80211_regdomain *rd2) +{ + int r, size_of_regd; + unsigned int x, y; + unsigned int num_rules = 0, rule_idx = 0; + const struct ieee80211_reg_rule *rule1, *rule2; + struct ieee80211_reg_rule *intersected_rule; + struct ieee80211_regdomain *rd; + /* This is just a dummy holder to help us count */ + struct ieee80211_reg_rule irule; + + /* Uses the stack temporarily for counter arithmetic */ + intersected_rule = &irule; + + memset(intersected_rule, 0, sizeof(struct ieee80211_reg_rule)); + + if (!rd1 || !rd2) + return NULL; + + /* First we get a count of the rules we'll need, then we actually + * build them. This is to so we can malloc() and free() a + * regdomain once. The reason we use reg_rules_intersect() here + * is it will return -EINVAL if the rule computed makes no sense. + * All rules that do check out OK are valid. */ + + for (x = 0; x < rd1->n_reg_rules; x++) { + rule1 = &rd1->reg_rules[x]; + for (y = 0; y < rd2->n_reg_rules; y++) { + rule2 = &rd2->reg_rules[y]; + if (!reg_rules_intersect(rule1, rule2, + intersected_rule)) + num_rules++; + memset(intersected_rule, 0, + sizeof(struct ieee80211_reg_rule)); + } + } + + if (!num_rules) + return NULL; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + ((num_rules + 1) * sizeof(struct ieee80211_reg_rule)); + + rd = kzalloc(size_of_regd, GFP_KERNEL); + if (!rd) + return NULL; + + for (x = 0; x < rd1->n_reg_rules; x++) { + rule1 = &rd1->reg_rules[x]; + for (y = 0; y < rd2->n_reg_rules; y++) { + rule2 = &rd2->reg_rules[y]; + /* This time around instead of using the stack lets + * write to the target rule directly saving ourselves + * a memcpy() */ + intersected_rule = &rd->reg_rules[rule_idx]; + r = reg_rules_intersect(rule1, rule2, + intersected_rule); + /* No need to memset here the intersected rule here as + * we're not using the stack anymore */ + if (r) + continue; + rule_idx++; + } + } + + if (rule_idx != num_rules) { + kfree(rd); + return NULL; + } - return ®dom_world; + rd->n_reg_rules = num_rules; + rd->alpha2[0] = '9'; + rd->alpha2[1] = '8'; + + return rd; } +/* XXX: add support for the rest of enum nl80211_reg_rule_flags, we may + * want to just have the channel structure use these */ +static u32 map_regdom_flags(u32 rd_flags) +{ + u32 channel_flags = 0; + if (rd_flags & NL80211_RRF_PASSIVE_SCAN) + channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN; + if (rd_flags & NL80211_RRF_NO_IBSS) + channel_flags |= IEEE80211_CHAN_NO_IBSS; + if (rd_flags & NL80211_RRF_DFS) + channel_flags |= IEEE80211_CHAN_RADAR; + return channel_flags; +} -static void handle_channel(struct ieee80211_channel *chan, - const struct ieee80211_regdomain *rd) +/** + * freq_reg_info - get regulatory information for the given frequency + * @center_freq: Frequency in KHz for which we want regulatory information for + * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one + * you can set this to 0. If this frequency is allowed we then set + * this value to the maximum allowed bandwidth. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency. + */ +static int freq_reg_info(u32 center_freq, u32 *bandwidth, + const struct ieee80211_reg_rule **reg_rule) { int i; - u32 flags = chan->orig_flags; - const struct ieee80211_channel_range *rg = NULL; + u32 max_bandwidth = 0; + + if (!cfg80211_regdomain) + return -EINVAL; - for (i = 0; i < rd->n_ranges; i++) { - if (rd->ranges[i].start_freq <= chan->center_freq && - chan->center_freq <= rd->ranges[i].end_freq) { - rg = &rd->ranges[i]; + for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) { + const struct ieee80211_reg_rule *rr; + const struct ieee80211_freq_range *fr = NULL; + const struct ieee80211_power_rule *pr = NULL; + + rr = &cfg80211_regdomain->reg_rules[i]; + fr = &rr->freq_range; + pr = &rr->power_rule; + max_bandwidth = freq_max_bandwidth(fr, center_freq); + if (max_bandwidth && *bandwidth <= max_bandwidth) { + *reg_rule = rr; + *bandwidth = max_bandwidth; break; } } - if (!rg) { - /* not found */ + return !max_bandwidth; +} + +static void handle_channel(struct ieee80211_channel *chan) +{ + int r; + u32 flags = chan->orig_flags; + u32 max_bandwidth = 0; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + + r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq), + &max_bandwidth, ®_rule); + + if (r) { flags |= IEEE80211_CHAN_DISABLED; chan->flags = flags; return; } - chan->flags = flags; + power_rule = ®_rule->power_rule; + + chan->flags = flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, - rg->max_antenna_gain); + (int) MBI_TO_DBI(power_rule->max_antenna_gain)); + chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth); if (chan->orig_mpwr) - chan->max_power = min(chan->orig_mpwr, rg->max_power); + chan->max_power = min(chan->orig_mpwr, + (int) MBM_TO_DBM(power_rule->max_eirp)); else - chan->max_power = rg->max_power; + chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); } -static void handle_band(struct ieee80211_supported_band *sband, - const struct ieee80211_regdomain *rd) +static void handle_band(struct ieee80211_supported_band *sband) { int i; for (i = 0; i < sband->n_channels; i++) - handle_channel(&sband->channels[i], rd); + handle_channel(&sband->channels[i]); } -void wiphy_update_regulatory(struct wiphy *wiphy) +static void update_all_wiphy_regulatory(enum reg_set_by setby) { - enum ieee80211_band band; - const struct ieee80211_regdomain *rd = get_regdom(); + struct cfg80211_registered_device *drv; + + list_for_each_entry(drv, &cfg80211_drv_list, list) + wiphy_update_regulatory(&drv->wiphy, setby); +} - for (band = 0; band < IEEE80211_NUM_BANDS; band++) +void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) +{ + enum ieee80211_band band; + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (wiphy->bands[band]) - handle_band(wiphy->bands[band], rd); + handle_band(wiphy->bands[band]); + if (wiphy->reg_notifier) + wiphy->reg_notifier(wiphy, setby); + } +} + +/* Return value which can be used by ignore_request() to indicate + * it has been determined we should intersect two regulatory domains */ +#define REG_INTERSECT 1 + +/* This has the logic which determines when a new request + * should be ignored. */ +static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2) +{ + /* All initial requests are respected */ + if (!last_request) + return 0; + + switch (set_by) { + case REGDOM_SET_BY_INIT: + return -EINVAL; + case REGDOM_SET_BY_CORE: + /* + * Always respect new wireless core hints, should only happen + * when updating the world regulatory domain at init. + */ + return 0; + case REGDOM_SET_BY_COUNTRY_IE: + if (unlikely(!is_an_alpha2(alpha2))) + return -EINVAL; + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) { + if (last_request->wiphy != wiphy) { + /* + * Two cards with two APs claiming different + * different Country IE alpha2s. We could + * intersect them, but that seems unlikely + * to be correct. Reject second one for now. + */ + if (!alpha2_equal(alpha2, + cfg80211_regdomain->alpha2)) + return -EOPNOTSUPP; + return -EALREADY; + } + /* Two consecutive Country IE hints on the same wiphy */ + if (!alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + return 0; + return -EALREADY; + } + /* + * Ignore Country IE hints for now, need to think about + * what we need to do to support multi-domain operation. + */ + return -EOPNOTSUPP; + case REGDOM_SET_BY_DRIVER: + if (last_request->initiator == REGDOM_SET_BY_DRIVER) + return -EALREADY; + return 0; + case REGDOM_SET_BY_USER: + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) + return REG_INTERSECT; + return 0; + } + + return -EINVAL; +} + +/* Caller must hold &cfg80211_drv_mutex */ +int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, + const char *alpha2) +{ + struct regulatory_request *request; + bool intersect = false; + int r = 0; + + r = ignore_request(wiphy, set_by, alpha2); + + if (r == REG_INTERSECT) + intersect = true; + else if (r) + return r; + + request = kzalloc(sizeof(struct regulatory_request), + GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; + request->initiator = set_by; + request->wiphy = wiphy; + request->intersect = intersect; + + kfree(last_request); + last_request = request; + r = call_crda(alpha2); + +#ifndef CONFIG_WIRELESS_OLD_REGULATORY + if (r) + printk(KERN_ERR "cfg80211: Failed calling CRDA\n"); +#endif + + return r; +} + +void regulatory_hint(struct wiphy *wiphy, const char *alpha2) +{ + BUG_ON(!alpha2); + + mutex_lock(&cfg80211_drv_mutex); + __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2); + mutex_unlock(&cfg80211_drv_mutex); +} +EXPORT_SYMBOL(regulatory_hint); + + +static void print_rd_rules(const struct ieee80211_regdomain *rd) +{ + unsigned int i; + const struct ieee80211_reg_rule *reg_rule = NULL; + const struct ieee80211_freq_range *freq_range = NULL; + const struct ieee80211_power_rule *power_rule = NULL; + + printk(KERN_INFO "\t(start_freq - end_freq @ bandwidth), " + "(max_antenna_gain, max_eirp)\n"); + + for (i = 0; i < rd->n_reg_rules; i++) { + reg_rule = &rd->reg_rules[i]; + freq_range = ®_rule->freq_range; + power_rule = ®_rule->power_rule; + + /* There may not be documentation for max antenna gain + * in certain regions */ + if (power_rule->max_antenna_gain) + printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), " + "(%d mBi, %d mBm)\n", + freq_range->start_freq_khz, + freq_range->end_freq_khz, + freq_range->max_bandwidth_khz, + power_rule->max_antenna_gain, + power_rule->max_eirp); + else + printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), " + "(N/A, %d mBm)\n", + freq_range->start_freq_khz, + freq_range->end_freq_khz, + freq_range->max_bandwidth_khz, + power_rule->max_eirp); + } +} + +static void print_regdomain(const struct ieee80211_regdomain *rd) +{ + + if (is_world_regdom(rd->alpha2)) + printk(KERN_INFO "cfg80211: World regulatory " + "domain updated:\n"); + else { + if (is_unknown_alpha2(rd->alpha2)) + printk(KERN_INFO "cfg80211: Regulatory domain " + "changed to driver built-in settings " + "(unknown country)\n"); + else + printk(KERN_INFO "cfg80211: Regulatory domain " + "changed to country: %c%c\n", + rd->alpha2[0], rd->alpha2[1]); + } + print_rd_rules(rd); +} + +static void print_regdomain_info(const struct ieee80211_regdomain *rd) +{ + printk(KERN_INFO "cfg80211: Regulatory domain: %c%c\n", + rd->alpha2[0], rd->alpha2[1]); + print_rd_rules(rd); +} + +/* Takes ownership of rd only if it doesn't fail */ +static int __set_regdom(const struct ieee80211_regdomain *rd) +{ + const struct ieee80211_regdomain *intersected_rd = NULL; + /* Some basic sanity checks first */ + + if (is_world_regdom(rd->alpha2)) { + if (WARN_ON(!reg_is_valid_request(rd->alpha2))) + return -EINVAL; + update_world_regdomain(rd); + return 0; + } + + if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && + !is_unknown_alpha2(rd->alpha2)) + return -EINVAL; + + if (!last_request) + return -EINVAL; + + /* allow overriding the static definitions if CRDA is present */ + if (!is_old_static_regdom(cfg80211_regdomain) && + !regdom_changed(rd->alpha2)) + return -EINVAL; + + /* Now lets set the regulatory domain, update all driver channels + * and finally inform them of what we have done, in case they want + * to review or adjust their own settings based on their own + * internal EEPROM data */ + + if (WARN_ON(!reg_is_valid_request(rd->alpha2))) + return -EINVAL; + + if (!is_valid_rd(rd)) { + printk(KERN_ERR "cfg80211: Invalid " + "regulatory domain detected:\n"); + print_regdomain_info(rd); + return -EINVAL; + } + + if (!last_request->intersect) { + reset_regdomains(); + cfg80211_regdomain = rd; + return 0; + } + + /* Intersection requires a bit more work */ + + if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE) { + + intersected_rd = regdom_intersect(rd, cfg80211_regdomain); + if (!intersected_rd) + return -EINVAL; + + /* We can trash what CRDA provided now */ + kfree(rd); + rd = NULL; + + reset_regdomains(); + cfg80211_regdomain = intersected_rd; + + return 0; + } + + /* Country IE parsing coming soon */ + reset_regdomains(); + WARN_ON(1); + + return 0; +} + + +/* Use this call to set the current regulatory domain. Conflicts with + * multiple drivers can be ironed out later. Caller must've already + * kmalloc'd the rd structure. Caller must hold cfg80211_drv_mutex */ +int set_regdom(const struct ieee80211_regdomain *rd) +{ + int r; + + /* Note that this doesn't update the wiphys, this is done below */ + r = __set_regdom(rd); + if (r) { + kfree(rd); + return r; + } + + /* This would make this whole thing pointless */ + BUG_ON(rd != cfg80211_regdomain); + + /* update all wiphys now with the new established regulatory domain */ + update_all_wiphy_regulatory(last_request->initiator); + + print_regdomain(rd); + + return r; +} + +int regulatory_init(void) +{ + int err; + + reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0); + if (IS_ERR(reg_pdev)) + return PTR_ERR(reg_pdev); + +#ifdef CONFIG_WIRELESS_OLD_REGULATORY + cfg80211_regdomain = static_regdom(ieee80211_regdom); + + printk(KERN_INFO "cfg80211: Using static regulatory domain info\n"); + print_regdomain_info(cfg80211_regdomain); + /* The old code still requests for a new regdomain and if + * you have CRDA you get it updated, otherwise you get + * stuck with the static values. We ignore "EU" code as + * that is not a valid ISO / IEC 3166 alpha2 */ + if (ieee80211_regdom[0] != 'E' || ieee80211_regdom[1] != 'U') + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, + ieee80211_regdom); +#else + cfg80211_regdomain = cfg80211_world_regdom; + + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00"); + if (err) + printk(KERN_ERR "cfg80211: calling CRDA failed - " + "unable to update world regulatory domain, " + "using static definition\n"); +#endif + + return 0; +} + +void regulatory_exit(void) +{ + mutex_lock(&cfg80211_drv_mutex); + + reset_regdomains(); + + kfree(last_request); + + platform_device_unregister(reg_pdev); + + mutex_unlock(&cfg80211_drv_mutex); }