+/*
+ * linux/arch/arm/mach-omap2/board-n800.c
+ *
+ * Copyright (C) 2005-2007 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tsc2301.h>
+#include <linux/spi/tsc2005.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/i2c/lm8323.h>
+#include <linux/i2c/menelaus.h>
+#include <linux/i2c/lp5521.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/lcd_mipid.h>
+#include <mach/clock.h>
+#include <mach/gpio-switch.h>
+#include <mach/omapfb.h>
+#include <mach/blizzard.h>
+#include <mach/board-nokia.h>
+
+#include <../drivers/cbus/tahvo.h>
+#include <../drivers/media/video/tcm825x.h>
+
+#define N800_BLIZZARD_POWERDOWN_GPIO 15
+#define N800_STI_GPIO 62
+#define N800_KEYB_IRQ_GPIO 109
+#define N800_DAV_IRQ_GPIO 103
+#define N800_TSC2301_RESET_GPIO 118
+
+#ifdef CONFIG_MACH_NOKIA_N810
+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
+ [0x01] = KEY_Q,
+ [0x02] = KEY_K,
+ [0x03] = KEY_O,
+ [0x04] = KEY_P,
+ [0x05] = KEY_BACKSPACE,
+ [0x06] = KEY_A,
+ [0x07] = KEY_S,
+ [0x08] = KEY_D,
+ [0x09] = KEY_F,
+ [0x0a] = KEY_G,
+ [0x0b] = KEY_H,
+ [0x0c] = KEY_J,
+
+ [0x11] = KEY_W,
+ [0x12] = KEY_F4,
+ [0x13] = KEY_L,
+ [0x14] = KEY_APOSTROPHE,
+ [0x16] = KEY_Z,
+ [0x17] = KEY_X,
+ [0x18] = KEY_C,
+ [0x19] = KEY_V,
+ [0x1a] = KEY_B,
+ [0x1b] = KEY_N,
+ [0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */
+ [0x1f] = KEY_F7,
+
+ [0x21] = KEY_E,
+ [0x22] = KEY_SEMICOLON,
+ [0x23] = KEY_MINUS,
+ [0x24] = KEY_EQUAL,
+ [0x2b] = KEY_FN,
+ [0x2c] = KEY_M,
+ [0x2f] = KEY_F8,
+
+ [0x31] = KEY_R,
+ [0x32] = KEY_RIGHTCTRL,
+ [0x34] = KEY_SPACE,
+ [0x35] = KEY_COMMA,
+ [0x37] = KEY_UP,
+ [0x3c] = KEY_COMPOSE,
+ [0x3f] = KEY_F6,
+
+ [0x41] = KEY_T,
+ [0x44] = KEY_DOT,
+ [0x46] = KEY_RIGHT,
+ [0x4f] = KEY_F5,
+ [0x51] = KEY_Y,
+ [0x53] = KEY_DOWN,
+ [0x55] = KEY_ENTER,
+ [0x5f] = KEY_ESC,
+
+ [0x61] = KEY_U,
+ [0x64] = KEY_LEFT,
+
+ [0x71] = KEY_I,
+ [0x75] = KEY_KPENTER,
+};
+
+static struct lm8323_platform_data lm8323_pdata = {
+ .repeat = 0, /* Repeat is handled in userspace for now. */
+ .keymap = rx44_keymap,
+ .size_x = 8,
+ .size_y = 8,
+ .debounce_time = 12,
+ .active_time = 500,
+
+ .name = "Internal keyboard",
+ .pwm1_name = "n810::keyboard",
+ .pwm2_name = "n810::cover",
+};
+#endif
+
+void __init nokia_n800_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+
+#ifdef CONFIG_OMAP_STI
+ if (gpio_request(N800_STI_GPIO, "STI") < 0) {
+ printk(KERN_ERR "Failed to request GPIO %d for STI\n",
+ N800_STI_GPIO);
+ return;
+ }
+
+ gpio_direction_output(N800_STI_GPIO, 0);
+#endif
+}
+
+#if defined(CONFIG_MENELAUS) && defined(CONFIG_SENSORS_TMP105)
+
+static int n800_tmp105_set_power(int enable)
+{
+ return menelaus_set_vaux(enable ? 2800 : 0);
+}
+
+#else
+
+#define n800_tmp105_set_power NULL
+
+#endif
+
+static struct omap_uart_config n800_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 2),
+};
+
+#include "../../../drivers/cbus/retu.h"
+
+static struct omap_fbmem_config n800_fbmem0_config __initdata = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config n800_fbmem1_config __initdata = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config n800_fbmem2_config __initdata = {
+ .size = 752 * 1024,
+};
+
+static struct omap_tmp105_config n800_tmp105_config __initdata = {
+ .tmp105_irq_pin = 125,
+ .set_power = n800_tmp105_set_power,
+};
+
+static void mipid_shutdown(struct mipid_platform_data *pdata)
+{
+ if (pdata->nreset_gpio != -1) {
+ pr_info("shutdown LCD\n");
+ gpio_set_value(pdata->nreset_gpio, 0);
+ msleep(120);
+ }
+}
+
+static struct mipid_platform_data n800_mipid_platform_data = {
+ .shutdown = mipid_shutdown,
+};
+
+static void __init mipid_dev_init(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL) {
+ n800_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
+ n800_mipid_platform_data.data_lines = conf->data_lines;
+ }
+}
+
+static struct {
+ struct clk *sys_ck;
+} blizzard;
+
+static int blizzard_get_clocks(void)
+{
+ blizzard.sys_ck = clk_get(0, "osc_ck");
+ if (IS_ERR(blizzard.sys_ck)) {
+ printk(KERN_ERR "can't get Blizzard clock\n");
+ return PTR_ERR(blizzard.sys_ck);
+ }
+ return 0;
+}
+
+static unsigned long blizzard_get_clock_rate(struct device *dev)
+{
+ return clk_get_rate(blizzard.sys_ck);
+}
+
+static void blizzard_enable_clocks(int enable)
+{
+ if (enable)
+ clk_enable(blizzard.sys_ck);
+ else
+ clk_disable(blizzard.sys_ck);
+}
+
+static void blizzard_power_up(struct device *dev)
+{
+ /* Vcore to 1.475V */
+ tahvo_set_clear_reg_bits(0x07, 0, 0xf);
+ msleep(10);
+
+ blizzard_enable_clocks(1);
+ gpio_set_value(N800_BLIZZARD_POWERDOWN_GPIO, 1);
+}
+
+static void blizzard_power_down(struct device *dev)
+{
+ gpio_set_value(N800_BLIZZARD_POWERDOWN_GPIO, 0);
+ blizzard_enable_clocks(0);
+
+ /* Vcore to 1.005V */
+ tahvo_set_clear_reg_bits(0x07, 0xf, 0);
+}
+
+static struct blizzard_platform_data n800_blizzard_data = {
+ .power_up = blizzard_power_up,
+ .power_down = blizzard_power_down,
+ .get_clock_rate = blizzard_get_clock_rate,
+ .te_connected = 1,
+};
+
+static void __init blizzard_dev_init(void)
+{
+ int r;
+
+ r = gpio_request(N800_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd");
+ if (r < 0)
+ return;
+ gpio_direction_output(N800_BLIZZARD_POWERDOWN_GPIO, 1);
+
+ blizzard_get_clocks();
+ omapfb_set_ctrl_platform_data(&n800_blizzard_data);
+}
+
+static struct omap_board_config_kernel n800_config[] __initdata = {
+ { OMAP_TAG_UART, &n800_uart_config },
+ { OMAP_TAG_FBMEM, &n800_fbmem0_config },
+ { OMAP_TAG_FBMEM, &n800_fbmem1_config },
+ { OMAP_TAG_FBMEM, &n800_fbmem2_config },
+ { OMAP_TAG_TMP105, &n800_tmp105_config },
+};
+
+static struct tsc2301_platform_data tsc2301_config = {
+ .reset_gpio = N800_TSC2301_RESET_GPIO,
+ .keymap = {
+ -1, /* Event for bit 0 */
+ KEY_UP, /* Event for bit 1 (up) */
+ KEY_F5, /* Event for bit 2 (home) */
+ -1, /* Event for bit 3 */
+ KEY_LEFT, /* Event for bit 4 (left) */
+ KEY_ENTER, /* Event for bit 5 (enter) */
+ KEY_RIGHT, /* Event for bit 6 (right) */
+ -1, /* Event for bit 7 */
+ KEY_ESC, /* Event for bit 8 (cycle) */
+ KEY_DOWN, /* Event for bit 9 (down) */
+ KEY_F4, /* Event for bit 10 (menu) */
+ -1, /* Event for bit 11 */
+ KEY_F8, /* Event for bit 12 (Zoom-) */
+ KEY_F6, /* Event for bit 13 (FS) */
+ KEY_F7, /* Event for bit 14 (Zoom+) */
+ -1, /* Event for bit 15 */
+ },
+ .kp_rep = 0,
+ .keyb_name = "Internal keypad",
+};
+
+static void tsc2301_dev_init(void)
+{
+ int r;
+ int gpio = N800_KEYB_IRQ_GPIO;
+
+ r = gpio_request(gpio, "tsc2301 KBD IRQ");
+ if (r >= 0) {
+ gpio_direction_input(gpio);
+ tsc2301_config.keyb_int = gpio_to_irq(gpio);
+ } else {
+ printk(KERN_ERR "unable to get KBD GPIO");
+ }
+
+ gpio = N800_DAV_IRQ_GPIO;
+ r = gpio_request(gpio, "tsc2301 DAV IRQ");
+ if (r >= 0) {
+ gpio_direction_input(gpio);
+ tsc2301_config.dav_int = gpio_to_irq(gpio);
+ } else {
+ printk(KERN_ERR "unable to get DAV GPIO");
+ }
+}
+
+static int __init tea5761_dev_init(void)
+{
+ const struct omap_tea5761_config *info;
+ int enable_gpio = 0;
+
+ info = omap_get_config(OMAP_TAG_TEA5761, struct omap_tea5761_config);
+ if (info)
+ enable_gpio = info->enable_gpio;
+
+ if (enable_gpio) {
+ pr_debug("Enabling tea5761 at GPIO %d\n",
+ enable_gpio);
+
+ if (gpio_request(enable_gpio, "TEA5761 enable") < 0) {
+ printk(KERN_ERR "Can't request GPIO %d\n",
+ enable_gpio);
+ return -ENODEV;
+ }
+
+ gpio_direction_output(enable_gpio, 0);
+ udelay(50);
+ gpio_set_value(enable_gpio, 1);
+ }
+
+ return 0;
+}
+
+static struct omap2_mcspi_device_config tsc2301_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+static struct omap2_mcspi_device_config cx3110x_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
+static struct tsc2005_platform_data tsc2005_config = {
+ .reset_gpio = 94,
+ .dav_gpio = 106
+};
+
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+#endif
+
+static struct spi_board_info n800_spi_board_info[] __initdata = {
+ {
+ .modalias = "lcd_mipid",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 4000000,
+ .controller_data= &mipid_mcspi_config,
+ .platform_data = &n800_mipid_platform_data,
+ }, {
+ .modalias = "cx3110x",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 48000000,
+ .controller_data= &cx3110x_mcspi_config,
+ },
+ {
+ .modalias = "tsc2301",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 6000000,
+ .controller_data= &tsc2301_mcspi_config,
+ .platform_data = &tsc2301_config,
+ },
+};
+
+static struct spi_board_info n810_spi_board_info[] __initdata = {
+ {
+ .modalias = "lcd_mipid",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 4000000,
+ .controller_data = &mipid_mcspi_config,
+ .platform_data = &n800_mipid_platform_data,
+ },
+ {
+ .modalias = "cx3110x",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 48000000,
+ .controller_data = &cx3110x_mcspi_config,
+ },
+ {
+ .modalias = "tsc2005",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 6000000,
+ .controller_data = &tsc2005_mcspi_config,
+ .platform_data = &tsc2005_config,
+ },
+};
+
+static void __init tsc2005_set_config(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL) {
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
+ if (strcmp(conf->panel_name, "lph8923") == 0) {
+ tsc2005_config.ts_x_plate_ohm = 180;
+ tsc2005_config.ts_hw_avg = 0;
+ tsc2005_config.ts_ignore_last = 0;
+ tsc2005_config.ts_touch_pressure = 1500;
+ tsc2005_config.ts_stab_time = 100;
+ tsc2005_config.ts_pressure_max = 2048;
+ tsc2005_config.ts_pressure_fudge = 2;
+ tsc2005_config.ts_x_max = 4096;
+ tsc2005_config.ts_x_fudge = 4;
+ tsc2005_config.ts_y_max = 4096;
+ tsc2005_config.ts_y_fudge = 7;
+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
+ tsc2005_config.ts_x_plate_ohm = 280;
+ tsc2005_config.ts_hw_avg = 0;
+ tsc2005_config.ts_ignore_last = 0;
+ tsc2005_config.ts_touch_pressure = 1500;
+ tsc2005_config.ts_stab_time = 1000;
+ tsc2005_config.ts_pressure_max = 2048;
+ tsc2005_config.ts_pressure_fudge = 2;
+ tsc2005_config.ts_x_max = 4096;
+ tsc2005_config.ts_x_fudge = 4;
+ tsc2005_config.ts_y_max = 4096;
+ tsc2005_config.ts_y_fudge = 7;
+ } else {
+ printk(KERN_ERR "Unknown panel type, set default "
+ "touchscreen configuration\n");
+ tsc2005_config.ts_x_plate_ohm = 200;
+ tsc2005_config.ts_stab_time = 100;
+ }
+#endif
+ }
+}
+
+#if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM)
+
+void retu_keypad_led_set_power(struct omap_pwm_led_platform_data *self,
+ int on_off)
+{
+ if (on_off) {
+ retu_write_reg(RETU_REG_CTRL_SET, 1 << 6);
+ msleep(2);
+ retu_write_reg(RETU_REG_CTRL_SET, 1 << 3);
+ } else {
+ retu_write_reg(RETU_REG_CTRL_CLR, (1 << 6) | (1 << 3));
+ }
+}
+
+static struct omap_pwm_led_platform_data n800_keypad_led_data = {
+ .name = "keypad",
+ .intensity_timer = 10,
+ .blink_timer = 9,
+ .set_power = retu_keypad_led_set_power,
+};
+
+static struct platform_device n800_keypad_led_device = {
+ .name = "omap_pwm_led",
+ .id = -1,
+ .dev = {
+ .platform_data = &n800_keypad_led_data,
+ },
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_TSC2301)
+static void __init n800_ts_set_config(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL) {
+ if (strcmp(conf->panel_name, "lph8923") == 0) {
+ tsc2301_config.ts_x_plate_ohm = 180;
+ tsc2301_config.ts_hw_avg = 8;
+ tsc2301_config.ts_max_pressure = 2048;
+ tsc2301_config.ts_touch_pressure = 400;
+ tsc2301_config.ts_stab_time = 100;
+ tsc2301_config.ts_pressure_fudge = 2;
+ tsc2301_config.ts_x_max = 4096;
+ tsc2301_config.ts_x_fudge = 4;
+ tsc2301_config.ts_y_max = 4096;
+ tsc2301_config.ts_y_fudge = 7;
+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
+ tsc2301_config.ts_x_plate_ohm = 280;
+ tsc2301_config.ts_hw_avg = 8;
+ tsc2301_config.ts_touch_pressure = 400;
+ tsc2301_config.ts_max_pressure = 2048;
+ tsc2301_config.ts_stab_time = 1000;
+ tsc2301_config.ts_pressure_fudge = 2;
+ tsc2301_config.ts_x_max = 4096;
+ tsc2301_config.ts_x_fudge = 4;
+ tsc2301_config.ts_y_max = 4096;
+ tsc2301_config.ts_y_fudge = 7;
+ } else {
+ printk(KERN_ERR "Unknown panel type, set default "
+ "touchscreen configuration\n");
+ tsc2301_config.ts_x_plate_ohm = 200;
+ tsc2301_config.ts_stab_time = 100;
+ }
+ }
+}
+#else
+static inline void n800_ts_set_config(void)
+{
+}
+#endif
+
+static struct omap_gpio_switch n800_gpio_switches[] __initdata = {
+ {
+ .name = "bat_cover",
+ .gpio = -1,
+ .debounce_rising = 100,
+ .debounce_falling = 0,
+ .notify = n800_mmc_slot1_cover_handler,
+ .notify_data = NULL,
+ }, {
+ .name = "headphone",
+ .gpio = -1,
+ .debounce_rising = 200,
+ .debounce_falling = 200,
+ }, {
+ .name = "cam_act",
+ .gpio = -1,
+ .debounce_rising = 200,
+ .debounce_falling = 200,
+ }, {
+ .name = "cam_turn",
+ .gpio = -1,
+ .debounce_rising = 100,
+ .debounce_falling = 100,
+ },
+};
+
+#if defined(CONFIG_CBUS_RETU_HEADSET)
+static struct platform_device retu_headset_device = {
+ .name = "retu-headset",
+ .id = -1,
+};
+#endif
+
+static struct platform_device *n800_devices[] __initdata = {
+#if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM)
+ &n800_keypad_led_device,
+#endif
+#if defined(CONFIG_CBUS_RETU_HEADSET)
+ &retu_headset_device,
+#endif
+};
+
+#ifdef CONFIG_MENELAUS
+static int n800_auto_sleep_regulators(void)
+{
+ u32 val;
+ int ret;
+
+ val = EN_VPLL_SLEEP | EN_VMMC_SLEEP \
+ | EN_VAUX_SLEEP | EN_VIO_SLEEP \
+ | EN_VMEM_SLEEP | EN_DC3_SLEEP \
+ | EN_VC_SLEEP | EN_DC2_SLEEP;
+
+ ret = menelaus_set_regulator_sleep(1, val);
+ if (ret < 0) {
+ printk(KERN_ERR "Could not set regulators to sleep on "
+ "menelaus: %u\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int n800_auto_voltage_scale(void)
+{
+ int ret;
+
+ ret = menelaus_set_vcore_hw(1400, 1050);
+ if (ret < 0) {
+ printk(KERN_ERR "Could not set VCORE voltage on "
+ "menelaus: %u\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int n800_menelaus_init(struct device *dev)
+{
+ int ret;
+
+ ret = n800_auto_voltage_scale();
+ if (ret < 0)
+ return ret;
+ ret = n800_auto_sleep_regulators();
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static struct menelaus_platform_data n800_menelaus_platform_data = {
+ .late_init = n800_menelaus_init,
+};
+#endif
+
+static struct i2c_board_info __initdata n800_i2c_board_info_1[] = {
+ {
+ I2C_BOARD_INFO("menelaus", 0x72),
+ .irq = INT_24XX_SYS_NIRQ,
+ .platform_data = &n800_menelaus_platform_data,
+ },
+};
+
+static struct lp5521_platform_data n810_lp5521_platform_data = {
+ .mode = LP5521_MODE_DIRECT_CONTROL,
+ .label = "n810",
+ .red_present = true,
+ .green_present = true,
+ .blue_present = true,
+};
+
+extern struct tcm825x_platform_data n800_tcm825x_platform_data;
+
+static struct i2c_board_info __initdata_or_module n8x0_i2c_board_info_2[] = {
+ {
+ I2C_BOARD_INFO(TCM825X_NAME, TCM825X_I2C_ADDR),
+#if defined (CONFIG_VIDEO_TCM825X) || defined (CONFIG_VIDEO_TCM825X_MODULE)
+ .platform_data = &n800_tcm825x_platform_data,
+#endif
+ },
+};
+
+
+static struct i2c_board_info __initdata_or_module n800_i2c_board_info_2[] = {
+ {
+ I2C_BOARD_INFO("tea5761", 0x10),
+ },
+};
+
+static struct i2c_board_info __initdata_or_module n810_i2c_board_info_2[] = {
+ {
+ I2C_BOARD_INFO("lm8323", 0x45),
+ .irq = OMAP_GPIO_IRQ(109),
+ .platform_data = &lm8323_pdata,
+ },
+ {
+ I2C_BOARD_INFO("tsl2563", 0x29),
+ },
+ {
+ I2C_BOARD_INFO("lp5521", 0x32),
+ .platform_data = &n810_lp5521_platform_data,
+ },
+};
+
+void __init nokia_n800_common_init(void)
+{
+ platform_add_devices(n800_devices, ARRAY_SIZE(n800_devices));
+
+ n800_flash_init();
+ n800_mmc_init();
+ n800_bt_init();
+ n800_dsp_init();
+ n800_usb_init();
+ n800_cam_init();
+ if (machine_is_nokia_n800())
+ spi_register_board_info(n800_spi_board_info,
+ ARRAY_SIZE(n800_spi_board_info));
+ if (machine_is_nokia_n810()) {
+ tsc2005_set_config();
+ spi_register_board_info(n810_spi_board_info,
+ ARRAY_SIZE(n810_spi_board_info));
+ }
+ omap_serial_init();
+ omap_register_i2c_bus(1, 400, n800_i2c_board_info_1,
+ ARRAY_SIZE(n800_i2c_board_info_1));
+ omap_register_i2c_bus(2, 400, n8x0_i2c_board_info_2,
+ ARRAY_SIZE(n8x0_i2c_board_info_2));
+ if (machine_is_nokia_n800())
+ i2c_register_board_info(2, n800_i2c_board_info_2,
+ ARRAY_SIZE(n800_i2c_board_info_2));
+ if (machine_is_nokia_n810())
+ i2c_register_board_info(2, n810_i2c_board_info_2,
+ ARRAY_SIZE(n810_i2c_board_info_2));
+
+ mipid_dev_init();
+ blizzard_dev_init();
+}
+
+static void __init nokia_n800_init(void)
+{
+ nokia_n800_common_init();
+
+ n800_ts_set_config();
+ tsc2301_dev_init();
+ tea5761_dev_init();
+ omap_register_gpio_switches(n800_gpio_switches,
+ ARRAY_SIZE(n800_gpio_switches));
+}
+
+void __init nokia_n800_map_io(void)
+{
+ omap_board_config = n800_config;
+ omap_board_config_size = ARRAY_SIZE(n800_config);
+
+ omap2_set_globals_242x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(NOKIA_N800, "Nokia N800")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = nokia_n800_map_io,
+ .init_irq = nokia_n800_init_irq,
+ .init_machine = nokia_n800_init,
+ .timer = &omap_timer,
+MACHINE_END