#ifdef CONFIG_SUPERH
#include <asm/clock.h>
#include <asm/sh_bios.h>
-#include <asm/kgdb.h>
#endif
#include "sh-sci.h"
#endif
};
-#ifdef CONFIG_SH_KGDB
-static struct sci_port *kgdb_sci_port;
-#endif
-
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static struct sci_port *serial_console_port;
#endif
return container_of(uart, struct sci_port, port);
}
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
- defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
static inline void handle_error(struct uart_port *port)
{
/* Clear error flags */
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
}
-static int get_char(struct uart_port *port)
+static int sci_poll_get_char(struct uart_port *port)
{
- unsigned long flags;
unsigned short status;
int c;
- spin_lock_irqsave(&port->lock, flags);
do {
status = sci_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
continue;
}
} while (!(status & SCxSR_RDxF(port)));
+
c = sci_in(port, SCxRDR);
+
/* Dummy read */
sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
- spin_unlock_irqrestore(&port->lock, flags);
return c;
}
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
-static void put_char(struct uart_port *port, char c)
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
{
- unsigned long flags;
unsigned short status;
- spin_lock_irqsave(&port->lock, flags);
-
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
sci_out(port, SCxTDR, c);
-
- spin_unlock_irqrestore(&port->lock, flags);
}
-#endif
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static void put_string(struct sci_port *sci_port, const char *buffer, int count)
-{
- struct uart_port *port = &sci_port->port;
- const unsigned char *p = buffer;
- int i;
-
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
- int checksum;
- int usegdb = 0;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
- /* This call only does a trap the first time it is
- * called, and so is safe to do here unconditionally
- */
- usegdb |= sh_bios_in_gdb_mode();
-#endif
-#ifdef CONFIG_SH_KGDB
- usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
-#endif
-
- if (usegdb) {
- /* $<packet info>#<checksum>. */
- do {
- unsigned char c;
- put_char(port, '$');
- put_char(port, 'O'); /* 'O'utput to console */
- checksum = 'O';
-
- /* Don't use run length encoding */
- for (i = 0; i < count; i++) {
- int h, l;
-
- c = *p++;
- h = hex_asc_hi(c);
- l = hex_asc_lo(c);
- put_char(port, h);
- put_char(port, l);
- checksum += h + l;
- }
- put_char(port, '#');
- put_char(port, hex_asc_hi(checksum));
- put_char(port, hex_asc_lo(checksum));
- } while (get_char(port) != '+');
- } else
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
- for (i = 0; i < count; i++) {
- if (*p == 10)
- put_char(port, '\r');
- put_char(port, *p++);
- }
-}
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-
-#ifdef CONFIG_SH_KGDB
-static int kgdb_sci_getchar(void)
-{
- int c;
-
- /* Keep trying to read a character, this could be neater */
- while ((c = get_char(&kgdb_sci_port->port)) < 0)
- cpu_relax();
-
- return c;
-}
-
-static inline void kgdb_sci_putchar(int c)
-{
- put_char(&kgdb_sci_port->port, c);
-}
-#endif /* CONFIG_SH_KGDB */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
#if defined(__H8300S__)
enum { sci_disable, sci_enable };
.request_port = sci_request_port,
.config_port = sci_config_port,
.verify_port = sci_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = sci_poll_get_char,
+ .poll_put_char = sci_poll_put_char,
+#endif
};
static void __init sci_init_ports(void)
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
- put_string(serial_console_port, s, count);
+ struct uart_port *port = &serial_console_port->port;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (*s == 10)
+ sci_poll_put_char(port, '\r');
+
+ sci_poll_put_char(port, *s++);
+ }
}
static int __init serial_console_setup(struct console *co, char *options)
console_initcall(sci_console_init);
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-#ifdef CONFIG_SH_KGDB_CONSOLE
-/*
- * FIXME: Most of this can go away.. at the moment, we rely on
- * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
- * most of that can easily be done here instead.
- *
- * For the time being, just accept the values that were parsed earlier..
- */
-static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
- int *parity, int *bits)
-{
- *baud = kgdb_baud;
- *parity = tolower(kgdb_parity);
- *bits = kgdb_bits - '0';
-}
-
-/*
- * The naming here is somewhat misleading, since kgdb_console_setup() takes
- * care of the early-on initialization for kgdb, regardless of whether we
- * actually use kgdb as a console or not.
- *
- * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
- */
-int __init kgdb_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &sci_ports[kgdb_portnum].port;
- int baud = 38400;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index != kgdb_portnum)
- co->index = kgdb_portnum;
-
- kgdb_sci_port = &sci_ports[co->index];
- port = &kgdb_sci_port->port;
-
- /*
- * Also need to check port->type, we don't actually have any
- * UPIO_PORT ports, but uart_report_port() handily misreports
- * it anyways if we don't have a port available by the time this is
- * called.
- */
- if (!port->type)
- return -ENODEV;
- if (!port->membase || !port->mapbase)
- return -ENODEV;
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- kgdb_console_get_options(port, &baud, &parity, &bits);
-
- kgdb_getchar = kgdb_sci_getchar;
- kgdb_putchar = kgdb_sci_putchar;
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct console kgdb_console = {
- .name = "ttySC",
- .device = uart_console_device,
- .write = kgdb_console_write,
- .setup = kgdb_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &sci_uart_driver,
-};
-
-/* Register the KGDB console so we get messages (d'oh!) */
-static int __init kgdb_console_init(void)
-{
- sci_init_ports();
- register_console(&kgdb_console);
- return 0;
-}
-console_initcall(kgdb_console_init);
-#endif /* CONFIG_SH_KGDB_CONSOLE */
-
-#if defined(CONFIG_SH_KGDB_CONSOLE)
-#define SCI_CONSOLE (&kgdb_console)
-#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#define SCI_CONSOLE (&serial_console)
#else
#define SCI_CONSOLE 0
uart_add_one_port(&sci_uart_driver, &sciport->port);
}
-#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
- kgdb_sci_port = &sci_ports[kgdb_portnum];
- kgdb_getchar = kgdb_sci_getchar;
- kgdb_putchar = kgdb_sci_putchar;
-#endif
-
#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
dev_info(&dev->dev, "CPU frequency notifier registered\n");
projects / linux-2.6-omap-h63xx.git / commitdiff