#include <linux/kernel_stat.h>
#include <linux/ptrace.h>
#include <linux/hardirq.h>
-#include <asm/irq.h>
-#include <asm/thread_info.h>
+#include <linux/irq.h>
+#include <linux/thread_info.h>
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+#define DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val))
int main(void)
{
}
EXPORT_SYMBOL(set_bfin_dma_config);
-void set_dma_sg(unsigned int channel, struct dmasg * sg, int nr_sg)
+void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg)
{
BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
&& channel < MAX_BLACKFIN_DMA_CHANNEL));
if (size <= 0)
return NULL;
-
+
local_irq_save(flags);
if ((unsigned long)src < memory_end)
addr = __dma_memcpy(dest+bulk, src+bulk, rest);
return addr;
}
-
EXPORT_SYMBOL(dma_memcpy);
void *safe_dma_memcpy(void *dest, const void *src, size_t size)
void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
{
-
unsigned long flags;
-
+
local_irq_save(flags);
-
- blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len);
- bfin_write_MDMA_D0_START_ADDR(addr);
+ blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+
+ bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(0);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
- bfin_write_MDMA_D0_START_ADDR(buf);
+ bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(1);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len);
- bfin_write_MDMA_D0_START_ADDR(addr);
+ blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+
+ bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(0);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- bfin_write_MDMA_D0_START_ADDR(buf);
+
+ bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(2);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len);
- bfin_write_MDMA_D0_START_ADDR(addr);
+ blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+
+ bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(0);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_insl(const void __iomem *addr, void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- bfin_write_MDMA_D0_START_ADDR(buf);
+
+ bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(4);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
static void default_gpio(unsigned short gpio)
{
- unsigned short bank,bitmask;
+ unsigned short bank, bitmask;
bank = gpio_bank(gpio);
bitmask = gpio_bit(gpio);
printk(KERN_INFO "Blackfin GPIO Controller\n");
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE)
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
reserved_map[gpio_bank(i)] = 0;
#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
u32 sic_iwr = 0;
u16 bank, mask, i, gpio;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
return IWR_ENABLE_ALL;
}
-
void gpio_pm_restore(void)
{
u16 bank, mask, i;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
}
EXPORT_SYMBOL(gpio_request);
-
void gpio_free(unsigned short gpio)
{
unsigned long flags;
}
EXPORT_SYMBOL(gpio_free);
-
void gpio_direction_input(unsigned short gpio)
{
unsigned long flags;
*/
#include <linux/module.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+
#include <asm/checksum.h>
#include <asm/cacheflush.h>
-#include <asm/uaccess.h>
/* platform dependent support */
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/io.h>
#include <asm/bfin-global.h>
static spinlock_t dma_page_lock;
#include <linux/init.h>
#include <linux/module.h>
-static int *testarg = (int*)0xfeb00000;
+static int *testarg = (int *)0xfeb00000;
static int test_init(void)
{
*testarg = 1;
- printk("Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
+ printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
*testarg, testarg);
return 0;
}
static void test_exit(void)
{
- printk("Dual core test module removed: testarg = [%d]\n", *testarg);
+ printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
}
module_init(test_init);
* BF561 SMP).
*/
#include <linux/linkage.h>
+#include <linux/unistd.h>
#include <asm/entry.h>
-#include <asm/unistd.h>
.text
ENTRY(_fixed_code_start)
unsigned long val;
switch (type) {
- case FLAT_BFIN_RELOC_TYPE_16_BIT:
- case FLAT_BFIN_RELOC_TYPE_16H_BIT:
- usptr = (unsigned short *)ptr;
- pr_debug("*usptr = %x", get_unaligned(usptr));
- val = get_unaligned(usptr);
- val += *persistent;
- break;
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ usptr = (unsigned short *)ptr;
+ pr_debug("*usptr = %x", get_unaligned(usptr));
+ val = get_unaligned(usptr);
+ val += *persistent;
+ break;
- case FLAT_BFIN_RELOC_TYPE_32_BIT:
- pr_debug("*ptr = %lx", get_unaligned(ptr));
- val = get_unaligned(ptr);
- break;
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ pr_debug("*ptr = %lx", get_unaligned(ptr));
+ val = get_unaligned(ptr);
+ break;
- default:
- pr_debug("BINFMT_FLAT: Unknown relocation type %x\n",
- type);
-
- return 0;
+ default:
+ pr_debug("BINFMT_FLAT: Unknown relocation type %x\n", type);
+ return 0;
}
/*
int type = (relval >> 26) & 7;
switch (type) {
- case FLAT_BFIN_RELOC_TYPE_16_BIT:
- put_unaligned(addr, usptr);
- pr_debug("new value %x at %p", get_unaligned(usptr),
- usptr);
- break;
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ put_unaligned(addr, usptr);
+ pr_debug("new value %x at %p", get_unaligned(usptr), usptr);
+ break;
- case FLAT_BFIN_RELOC_TYPE_16H_BIT:
- put_unaligned(addr >> 16, usptr);
- pr_debug("new value %x", get_unaligned(usptr));
- break;
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ put_unaligned(addr >> 16, usptr);
+ pr_debug("new value %x", get_unaligned(usptr));
+ break;
- case FLAT_BFIN_RELOC_TYPE_32_BIT:
- put_unaligned(addr, ptr);
- pr_debug("new ptr =%lx", get_unaligned(ptr));
- break;
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ put_unaligned(addr, ptr);
+ pr_debug("new ptr =%lx", get_unaligned(ptr));
+ break;
}
}
EXPORT_SYMBOL(bfin_put_addr_at_rp);
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
- unlock:
+ unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
seq_printf(p, "Err: %10lu\n", irq_err_count);
for (s = sechdrs; s < sechdrs_end; ++s) {
if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
- ((strcmp(".text", secstrings + s->sh_name)==0) &&
- (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+ ((strcmp(".text", secstrings + s->sh_name) == 0) &&
+ (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
mod->arch.text_l1 = s;
dest = l1_inst_sram_alloc(s->sh_size);
if (dest == NULL) {
s->sh_flags &= ~SHF_ALLOC;
s->sh_addr = (unsigned long)dest;
}
- if ((strcmp(".l1.data", secstrings + s->sh_name) == 0)||
- ((strcmp(".data", secstrings + s->sh_name)==0) &&
- (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
+ ((strcmp(".data", secstrings + s->sh_name) == 0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
mod->arch.data_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
if (dest == NULL) {
s->sh_addr = (unsigned long)dest;
}
if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
- ((strcmp(".bss", secstrings + s->sh_name)==0) &&
- (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
mod->arch.bss_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
if (dest == NULL) {
pr_debug("before %x after %x\n", *location16,
(value & 0xffff));
tmp = (value & 0xffff);
- if((unsigned long)location16 >= L1_CODE_START) {
+ if ((unsigned long)location16 >= L1_CODE_START) {
dma_memcpy(location16, &tmp, 2);
} else
*location16 = tmp;
pr_debug("before %x after %x\n", *location16,
((value >> 16) & 0xffff));
tmp = ((value >> 16) & 0xffff);
- if((unsigned long)location16 >= L1_CODE_START) {
+ if ((unsigned long)location16 >= L1_CODE_START) {
dma_memcpy(location16, &tmp, 2);
} else
*location16 = tmp;
continue;
if ((sechdrs[i].sh_type == SHT_RELA) &&
- ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0)||
- ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
+ ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
+ ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
(hdr->e_flags & FLG_CODE_IN_L1)))) {
apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
symindex, i, mod);
void module_arch_cleanup(struct module *mod)
{
if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr))
- l1_inst_sram_free((void*)mod->arch.text_l1->sh_addr);
+ l1_inst_sram_free((void *)mod->arch.text_l1->sh_addr);
if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr))
- l1_data_sram_free((void*)mod->arch.data_a_l1->sh_addr);
+ l1_data_sram_free((void *)mod->arch.data_a_l1->sh_addr);
if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr))
- l1_data_sram_free((void*)mod->arch.bss_a_l1->sh_addr);
+ l1_data_sram_free((void *)mod->arch.bss_a_l1->sh_addr);
if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr))
- l1_data_B_sram_free((void*)mod->arch.data_b_l1->sh_addr);
+ l1_data_B_sram_free((void *)mod->arch.data_b_l1->sh_addr);
if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr))
- l1_data_B_sram_free((void*)mod->arch.bss_b_l1->sh_addr);
+ l1_data_B_sram_free((void *)mod->arch.bss_b_l1->sh_addr);
}
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/a.out.h>
+#include <linux/uaccess.h>
#include <asm/blackfin.h>
-#include <asm/uaccess.h>
#include <asm/fixed_code.h>
#define LED_ON 0
printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
regs->r4, regs->r5, regs->r6, regs->r7);
- if (!(regs->ipend))
- printk("USP: %08lx\n", rdusp());
+ if (!regs->ipend)
+ printk(KERN_NOTICE "USP: %08lx\n", rdusp());
}
/* Fill in the fpu structure for a core dump. */
goto out;
error = do_execve(filename, argv, envp, regs);
putname(filename);
- out:
+ out:
unlock_kernel();
return error;
}
if (addr > (addr + size))
return 0;
- if (segment_eq(get_fs(),KERNEL_DS))
+ if (segment_eq(get_fs(), KERNEL_DS))
return 1;
#ifdef CONFIG_MTD_UCLINUX
if (addr >= memory_start && (addr + size) <= memory_end)
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
static inline int
put_reg(struct task_struct *task, int regno, unsigned long data)
{
- char * reg_ptr;
+ char *reg_ptr;
struct pt_regs *regs =
(struct pt_regs *)((unsigned long)task_stack_page(task) +
break;
default:
if (regno <= 216)
- *(long *)(reg_ptr + regno) = data;
+ *(long *)(reg_ptr + regno) = data;
}
return 0;
}
, _stext, _etext,
__start_rodata, __end_rodata,
_sdata, _edata,
- (void*)&init_thread_union, (void*)((int)(&init_thread_union) + 0x2000),
+ (void *)&init_thread_union, (void *)((int)(&init_thread_union) + 0x2000),
__init_begin, __init_end,
__bss_start, __bss_stop,
- (void*)_ramstart, (void*)memory_end
+ (void *)_ramstart, (void *)memory_end
#ifdef CONFIG_MTD_UCLINUX
- , (void*)memory_mtd_start, (void*)(memory_mtd_start + mtd_size)
+ , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
#endif
#if DMA_UNCACHED_REGION > 0
- , (void*)(_ramend - DMA_UNCACHED_REGION), (void*)(_ramend)
+ , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
#endif
);
return get_vco() / ssel;
return get_vco() >> csel;
}
-
EXPORT_SYMBOL(get_cclk);
/* Get the System clock */
return get_vco() / ssel;
}
-
EXPORT_SYMBOL(get_sclk);
/*
seq_printf(m, "D-CACHE:\tOFF\n");
- switch(bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
- case ACACHE_BSRAM:
- seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
- dcache_size = 16;
- dsup_banks = 1;
- break;
- case ACACHE_BCACHE:
- seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
- dcache_size = 32;
- dsup_banks = 2;
- break;
- case ASRAM_BSRAM:
- seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
- dcache_size = 0;
- dsup_banks = 0;
- break;
- default:
+ switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
+ case ACACHE_BSRAM:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 16;
+ dsup_banks = 1;
+ break;
+ case ACACHE_BCACHE:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
+ dcache_size = 32;
+ dsup_banks = 2;
+ break;
+ case ASRAM_BSRAM:
+ seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 0;
+ dsup_banks = 0;
+ break;
+ default:
break;
}
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/freezer.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
return r0;
- badframe:
+ badframe:
force_sig(SIGSEGV, current);
return 0;
}
return 0;
- give_sigsegv:
+ give_sigsegv:
if (sig == SIGSEGV)
ka->sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, current);
}
/* fallthrough */
case -ERESTARTNOINTR:
- do_restart:
+ do_restart:
regs->p0 = regs->orig_p0;
regs->r0 = regs->orig_r0;
regs->pc -= 2;
return;
}
-no_signal:
+ no_signal:
/* Did we come from a system call? */
if (regs->orig_p0 >= 0)
/* Restart the system call - no handlers present */
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
+#include <linux/uaccess.h>
+#include <linux/ipc.h>
+#include <linux/unistd.h>
#include <asm/cacheflush.h>
-#include <asm/uaccess.h>
-#include <asm/ipc.h>
#include <asm/dma.h>
-#include <asm/unistd.h>
/*
* sys_pipe() is the normal C calling standard for creating
if (file)
fput(file);
- out:
+ out:
return error;
}
static inline void do_leds(void)
{
static unsigned int count = 50;
- static int flag = 0;
+ static int flag;
unsigned short tmp = 0;
if (--count == 0) {
irqreturn_t timer_interrupt(int irq, void *dummy)
{
/* last time the cmos clock got updated */
- static long last_rtc_update = 0;
+ static long last_rtc_update;
write_seqlock(&xtime_lock);
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
-#include <asm/uaccess.h>
#include <asm/irq_handler.h>
#include <asm/trace.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
#ifdef CONFIG_KGDB
# include <linux/debugger.h>
if (!modname)
modname = delim = "";
return printk("<0x%p> { %s%s%s%s + 0x%lx }",
- (void*)address, delim, modname, delim, symname,
+ (void *)address, delim, modname, delim, symname,
(unsigned long)offset);
}
write_unlock_irq(&tasklist_lock);
return printk("<0x%p> [ %s + 0x%lx ]",
- (void*)address, name, offset);
+ (void *)address, name, offset);
}
vml = vml->next;
write_unlock_irq(&tasklist_lock);
/* we were unable to find this address anywhere */
- return printk("[<0x%p>]", (void*)address);
+ return printk("[<0x%p>]", (void *)address);
}
asmlinkage void trap_c(struct pt_regs *fp)
printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
KERN_EMERG "\n",
- (void*)current->mm->start_code,
- (void*)current->mm->end_code,
- (void*)current->mm->start_data,
- (void*)current->mm->end_data,
- (void*)current->mm->end_data,
- (void*)current->mm->brk,
- (void*)current->mm->start_stack);
+ (void *)current->mm->start_code,
+ (void *)current->mm->end_code,
+ (void *)current->mm->start_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->brk,
+ (void *)current->mm->start_stack);
}
printk(KERN_EMERG "return address: [0x%p]; contents of:", retaddr);
- if (retaddr != 0 && retaddr <= (void*)physical_mem_end
+ if (retaddr != 0 && retaddr <= (void *)physical_mem_end
#if L1_CODE_LENGTH != 0
/* FIXME: Copy the code out of L1 Instruction SRAM through dma
memcpy. */
- && !(retaddr >= (void*)L1_CODE_START
- && retaddr < (void*)(L1_CODE_START + L1_CODE_LENGTH))
+ && !(retaddr >= (void *)L1_CODE_START
+ && retaddr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
#endif
) {
int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32;
unsigned short x = 0;
- for (; i < ((unsigned int)retaddr & 0xFFFFFFF0 ) + 32 ;
- i += 2) {
- if ( !(i & 0xF) )
+ for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
+ if (!(i & 0xF))
printk(KERN_EMERG "\n" KERN_EMERG
"0x%08x: ", i);
" The rest of this error"
" is meanless\n");
#endif
- if ( i == (unsigned int)retaddr )
+ if (i == (unsigned int)retaddr)
printk("[%04x]", x);
else
printk(" %04x ", x);
break;
}
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR());
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR());
+ printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
dump_bfin_regs(fp, (void *)fp->retx);
dump_stack();
panic("Unrecoverable event\n");
int strcmp(const char *dest, const char *src)
{
- return __inline_strcmp(dest, src);
+ return __inline_strcmp(dest, src);
}
-
char *strcpy(char *dest, const char *src)
{
- return __inline_strcpy(dest, src);
+ return __inline_strcpy(dest, src);
}
-
int strncmp(const char *cs, const char *ct, size_t count)
{
- return __inline_strncmp(cs, ct, count);
+ return __inline_strncmp(cs, ct, count);
}
-
char *strncpy(char *dest, const char *src, size_t n)
{
- return __inline_strncpy(dest, src, n);
+ return __inline_strncpy(dest, src, n);
}
-
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
- },{
+ }, {
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1, /* Framework bus number */
.start = 0x20200300,
.end = 0x20200300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF0,
.end = IRQ_PF0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20308000,
.end = 0x20308000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20308004,
.end = 0x20308004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ,
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.start = 0x20310300,
.end = 0x20310300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
/*
* Name the Board for the /proc/cpuinfo
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF10,
.end = IRQ_PF10,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
#if defined(CONFIG_PBX)
{
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
int i;
struct cpufreq_freqs freqs;
- if (cpufreq_frequency_table_target
- (policy, bf533_freq_table, target_freq, relation, &index))
+ if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index))
return -EINVAL;
cclk_mhz = bf533_freq_table[index].frequency;
vco_mhz = bf533_freq_table[index].index;
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.start = 0x20200300,
.end = 0x20200300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF14,
.end = IRQ_PF14,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20308000,
.end = 0x20308000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20308004,
.end = 0x20308004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PG15,
.end = IRQ_PG15,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20200000,
.end = 0x20200000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
#include <linux/module.h>
#include <asm/blackfin.h>
-#if defined(CONFIG_GENERIC_BOARD) \
- || defined(CONFIG_BFIN537_STAMP)
+#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP)
/*
* Currently the MAC address is saved in Flash by U-Boot
*/
void get_bf537_ether_addr(char *addr)
{
- printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n",__FILE__);
+ printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__);
}
#endif
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
-#include <asm/bfin5xx_spi.h>
+#include <linux/irq.h>
#include <linux/usb_sl811.h>
+#include <asm/bfin5xx_spi.h>
/*
* Name the Board for the /proc/cpuinfo
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTA,
.end = IRQ_PROG_INTA,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTA,
.end = IRQ_PROG_INTA,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
.start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
.end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTA,
.end = IRQ_PROG_INTA,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
.start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
.end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
.flags = IORESOURCE_IRQ,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
#include <linux/usb_sl811.h>
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_SL811_BFIN_IRQ,
.end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
};
#endif
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
- .ctl_reg = 0x4, /* send zero */
- .enable_dma = 0,
- .bits_per_word = 8,
- .cs_change_per_word = 1,
-};
-#endif
-
-
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.cs_change_per_word = 1,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_PBX)
- {
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
.modalias = "ad7877",
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/bfin5xx_spi.h>
#include <linux/usb_sl811.h>
-
+#include <asm/bfin5xx_spi.h>
#include <linux/spi/ad7877.h>
/*
int __init bfin_isp1761_init(void)
{
- unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_SL811_BFIN_IRQ,
.end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-// .cs_change_per_word = 1,
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_PBX)
{
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/bfin5xx_spi.h>
printk(KERN_INFO "Blackfin GPIO Controller\n");
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE)
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
reserved_map[gpio_bank(i)] = 0;
return 0;
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.start = 0x28000300,
.end = 0x28000300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF0,
.end = IRQ_PF0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x24008000,
.end = 0x24008000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x24008004,
.end = 0x24008004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF47,
.end = IRQ_PF47,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device bfin_uart_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
};
#endif
static struct platform_device *cm_bf561_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+ &bfin_uart_device,
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <asm/irq.h>
-#include <asm/bfin5xx_spi.h>
-#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/bfin5xx_spi.h>
/*
* Name the Board for the /proc/cpuinfo
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
static struct resource bfin_isp1761_resources[] = {
- [0] = {
+ {
.name = "isp1761-regs",
.start = ISP1761_BASE + 0x00000000,
.end = ISP1761_BASE + 0x000fffff,
.flags = IORESOURCE_MEM,
},
- [1] = {
+ {
.start = ISP1761_IRQ,
.end = ISP1761_IRQ,
.flags = IORESOURCE_IRQ,
int __init bfin_isp1761_init(void)
{
- unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
.start = 0x2C010300,
.end = 0x2C010300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF9,
.end = IRQ_PF9,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device bfin_uart_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
};
#endif
&spi_bfin_master_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+ &bfin_uart_device,
#endif
};
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
char *bfin_board_name = "UNKNOWN BOARD";
.start = 0x2C010300,
.end = 0x2C010300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
char *bfin_board_name = "Tepla-BF561";
.start = 0x2C000300,
.end = 0x2C000320,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/uaccess.h>
#include <asm/dma.h>
-#include <asm/uaccess.h>
#define MODULE_VER "v0.1"
spin_unlock_irq(&coreb_lock);
return 0;
- out_busy:
+ out_busy:
spin_unlock_irq(&coreb_lock);
return -EBUSY;
}
printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
return 0;
- release_dma_src:
+ release_dma_src:
free_dma(CH_MEM_STREAM2_SRC);
- release_dma_dest:
+ release_dma_dest:
free_dma(CH_MEM_STREAM2_DEST);
- release_data_a_sram:
+ release_data_a_sram:
release_mem_region(0xff400000, 0x8000);
- release_data_b_sram:
+ release_data_b_sram:
release_mem_region(0xff500000, 0x8000);
- release_instruction_b_sram:
+ release_instruction_b_sram:
release_mem_region(0xff610000, 0x4000);
- release_instruction_a_sram:
+ release_instruction_a_sram:
release_mem_region(0xff600000, 0x4000);
- exit:
+ exit:
return -ENOMEM;
}
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
#include <asm/current.h>
-#include <asm/uaccess.h>
#include <asm/system.h>
-
#include <asm/cplb.h>
#include <asm/blackfin.h>
} else
buf += sprintf(buf, "Data CPLB entry:\n");
- buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\
-\tiCount\toCount\n");
+ buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\n\tiCount\toCount\n");
while (*p_addr != 0xffffffff) {
entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data);
p = buf;
- p += sprintf(p,
- "------------------ CPLB Information ------------------\n\n");
+ p += sprintf(p, "------------------ CPLB Information ------------------\n\n");
if (bfin_read_IMEM_CONTROL() & ENICPLB)
p = cplb_print_entry(p, CPLB_I);
{
struct proc_dir_entry *entry;
- if ((entry = create_proc_entry("cplbinfo", 0, NULL)) == NULL) {
+ entry = create_proc_entry("cplbinfo", 0, NULL);
+ if (!entry)
return -ENOMEM;
- }
entry->read_proc = cplbinfo_read_proc;
entry->write_proc = cplbinfo_write_proc;
#include <linux/linkage.h>
+#include <linux/unistd.h>
#include <asm/blackfin.h>
-#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/thread_info.h> /* TIF_NEED_RESCHED */
#include <asm/asm-offsets.h>
{
u16 gpionr = irq - IRQ_PF0;
- if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
set_gpio_data(gpionr, 0);
SSYNC();
}
{
u16 gpionr = irq - IRQ_PF0;
- if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
set_gpio_data(gpionr, 0);
SSYNC();
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
ret = gpio_request(gpionr, NULL);
- if(ret)
+ if (ret)
return ret;
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
ret = gpio_request(gpionr, NULL);
- if(ret)
+ if (ret)
return ret;
}
~(1 << (irq - (IRQ_CORETMR + 1))));
#else
unsigned mask_bank, mask_bit;
- mask_bank = (irq - (IRQ_CORETMR +1))/32;
- mask_bit = (irq - (IRQ_CORETMR + 1))%32;
+ mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
+ mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
bfin_write_SIC_IMASK( mask_bank, bfin_read_SIC_IMASK(mask_bank) & \
~(1 << mask_bit));
#endif
(1 << (irq - (IRQ_CORETMR + 1))));
#else
unsigned mask_bank, mask_bit;
- mask_bank = (irq - (IRQ_CORETMR +1))/32;
+ mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
mask_bit = (irq - (IRQ_CORETMR + 1))%32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | \
( 1 << mask_bit));
{
u16 i;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=16) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
int irq = IRQ_PF0 + i;
int flag_d = get_gpiop_data(i);
int mask =
sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1);
sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2);
SSYNC();
- for(;; ivg++) {
+ for (;; ivg++) {
if (ivg >= ivg_stop) {
atomic_inc(&num_spurious);
return;
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
+#include <linux/io.h>
+#include <linux/irq.h>
-#include <asm/io.h>
#include <asm/dpmc.h>
-#include <asm/irq.h>
#include <asm/gpio.h>
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
L1_SCRATCH_LENGTH >> 10);
memset(&l1_ssram, 0x00, sizeof(l1_ssram));
- l1_ssram[0].paddr = (void*)L1_SCRATCH_START;
+ l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
l1_ssram[0].size = L1_SCRATCH_LENGTH;
l1_ssram[0].flag = SRAM_SLT_FREE;
{
#if L1_CODE_LENGTH != 0
memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
- l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1);
+ l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
l1_inst_sram[0].flag = SRAM_SLT_FREE;
#include <linux/swap.h>
#include <linux/bootmem.h>
+#include <linux/uaccess.h>
#include <asm/bfin-global.h>
-#include <asm/uaccess.h>
#include <asm/l1layout.h>
#include "blackfin_sram.h"
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/mutex.h>
+#include <linux/ptrace.h>
+#include <linux/irq.h>
+#include <linux/io.h>
-#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
-#include <asm/io.h>
#include "op_blackfin.h"
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
+#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
-#include <asm/io.h>
#include "op_blackfin.h"
#include <linux/smp.h>
#include <linux/irq.h>
#include <linux/oprofile.h>
-
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
static void enable_sys_timer0()
{
projects / linux-2.6-omap-h63xx.git / commitdiff