Due to chip constraint MPC837x USB DR module can only use
ULPI and serial PHY interfaces.  The patch fixes the wrong
type in dts.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
                        mode = "cpu";
                };
 
-               /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
                usb@23000 {
                        compatible = "fsl-usb2-dr";
                        reg = <0x23000 0x1000>;
                        #size-cells = <0>;
                        interrupt-parent = <&ipic>;
                        interrupts = <38 0x8>;
-                       phy_type = "utmi_wide";
+                       dr_mode = "host";
+                       phy_type = "ulpi";
                };
 
                mdio@24520 {
 
                        mode = "cpu";
                };
 
-               /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
                usb@23000 {
                        compatible = "fsl-usb2-dr";
                        reg = <0x23000 0x1000>;
                        #size-cells = <0>;
                        interrupt-parent = <&ipic>;
                        interrupts = <38 0x8>;
-                       phy_type = "utmi_wide";
+                       dr_mode = "host";
+                       phy_type = "ulpi";
                };
 
                mdio@24520 {
 
                        mode = "cpu";
                };
 
-               /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
                usb@23000 {
                        compatible = "fsl-usb2-dr";
                        reg = <0x23000 0x1000>;
                        #size-cells = <0>;
                        interrupt-parent = <&ipic>;
                        interrupts = <38 0x8>;
-                       phy_type = "utmi_wide";
+                       dr_mode = "host";
+                       phy_type = "ulpi";
                };
 
                mdio@24520 {