--- /dev/null
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Tomas Winkler <tomas.winkler@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-sta.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+
+/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
+ * sending probe req. This should be set long enough to hear probe responses
+ * from more than one AP. */
+#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
+#define IWL_ACTIVE_DWELL_TIME_52 (10)
+
+/* For faster active scanning, scan will move to the next channel if fewer than
+ * PLCP_QUIET_THRESH packets are heard on this channel within
+ * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
+ * time if it's a quiet channel (nothing responded to our probe, and there's
+ * no other traffic).
+ * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
+#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
+#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
+
+/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
+ * Must be set longer than active dwell time.
+ * For the most reliable scan, set > AP beacon interval (typically 100msec). */
+#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
+#define IWL_PASSIVE_DWELL_TIME_52 (10)
+#define IWL_PASSIVE_DWELL_BASE (100)
+#define IWL_CHANNEL_TUNE_TIME 5
+
+
+
+static int iwl_is_empty_essid(const char *essid, int essid_len)
+{
+ /* Single white space is for Linksys APs */
+ if (essid_len == 1 && essid[0] == ' ')
+ return 1;
+
+ /* Otherwise, if the entire essid is 0, we assume it is hidden */
+ while (essid_len) {
+ essid_len--;
+ if (essid[essid_len] != '\0')
+ return 0;
+ }
+
+ return 1;
+}
+
+
+
+const char *iwl_escape_essid(const char *essid, u8 essid_len)
+{
+ static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+ const char *s = essid;
+ char *d = escaped;
+
+ if (iwl_is_empty_essid(essid, essid_len)) {
+ memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+ return escaped;
+ }
+
+ essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
+ while (essid_len--) {
+ if (*s == '\0') {
+ *d++ = '\\';
+ *d++ = '0';
+ s++;
+ } else
+ *d++ = *s++;
+ }
+ *d = '\0';
+ return escaped;
+}
+EXPORT_SYMBOL(iwl_escape_essid);
+
+/**
+ * iwl_scan_cancel - Cancel any currently executing HW scan
+ *
+ * NOTE: priv->mutex is not required before calling this function
+ */
+int iwl_scan_cancel(struct iwl_priv *priv)
+{
+ if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
+ clear_bit(STATUS_SCANNING, &priv->status);
+ return 0;
+ }
+
+ if (test_bit(STATUS_SCANNING, &priv->status)) {
+ if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN("Queuing scan abort.\n");
+ set_bit(STATUS_SCAN_ABORTING, &priv->status);
+ queue_work(priv->workqueue, &priv->abort_scan);
+
+ } else
+ IWL_DEBUG_SCAN("Scan abort already in progress.\n");
+
+ return test_bit(STATUS_SCANNING, &priv->status);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_scan_cancel);
+/**
+ * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
+ * @ms: amount of time to wait (in milliseconds) for scan to abort
+ *
+ * NOTE: priv->mutex must be held before calling this function
+ */
+int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
+{
+ unsigned long now = jiffies;
+ int ret;
+
+ ret = iwl_scan_cancel(priv);
+ if (ret && ms) {
+ mutex_unlock(&priv->mutex);
+ while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
+ test_bit(STATUS_SCANNING, &priv->status))
+ msleep(1);
+ mutex_lock(&priv->mutex);
+
+ return test_bit(STATUS_SCANNING, &priv->status);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(iwl_scan_cancel_timeout);
+
+static int iwl_send_scan_abort(struct iwl_priv *priv)
+{
+ int ret = 0;
+ struct iwl_rx_packet *res;
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_ABORT_CMD,
+ .meta.flags = CMD_WANT_SKB,
+ };
+
+ /* If there isn't a scan actively going on in the hardware
+ * then we are in between scan bands and not actually
+ * actively scanning, so don't send the abort command */
+ if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ return 0;
+ }
+
+ ret = iwl_send_cmd_sync(priv, &cmd);
+ if (ret) {
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ return ret;
+ }
+
+ res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+ if (res->u.status != CAN_ABORT_STATUS) {
+ /* The scan abort will return 1 for success or
+ * 2 for "failure". A failure condition can be
+ * due to simply not being in an active scan which
+ * can occur if we send the scan abort before we
+ * the microcode has notified us that a scan is
+ * completed. */
+ IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ }
+
+ dev_kfree_skb_any(cmd.meta.u.skb);
+
+ return ret;
+}
+
+
+/* Service response to REPLY_SCAN_CMD (0x80) */
+static void iwl_rx_reply_scan(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scanreq_notification *notif =
+ (struct iwl_scanreq_notification *)pkt->u.raw;
+
+ IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
+#endif
+}
+
+/* Service SCAN_START_NOTIFICATION (0x82) */
+static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scanstart_notification *notif =
+ (struct iwl_scanstart_notification *)pkt->u.raw;
+ priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
+ IWL_DEBUG_SCAN("Scan start: "
+ "%d [802.11%s] "
+ "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ notif->tsf_high,
+ notif->tsf_low, notif->status, notif->beacon_timer);
+}
+
+/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
+static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scanresults_notification *notif =
+ (struct iwl_scanresults_notification *)pkt->u.raw;
+
+ IWL_DEBUG_SCAN("Scan ch.res: "
+ "%d [802.11%s] "
+ "(TSF: 0x%08X:%08X) - %d "
+ "elapsed=%lu usec (%dms since last)\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ le32_to_cpu(notif->tsf_high),
+ le32_to_cpu(notif->tsf_low),
+ le32_to_cpu(notif->statistics[0]),
+ le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
+ jiffies_to_msecs(elapsed_jiffies
+ (priv->last_scan_jiffies, jiffies)));
+#endif
+
+ priv->last_scan_jiffies = jiffies;
+ priv->next_scan_jiffies = 0;
+}
+
+/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
+static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
+
+ IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+ scan_notif->scanned_channels,
+ scan_notif->tsf_low,
+ scan_notif->tsf_high, scan_notif->status);
+
+ /* The HW is no longer scanning */
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+
+ /* The scan completion notification came in, so kill that timer... */
+ cancel_delayed_work(&priv->scan_check);
+
+ IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
+ (priv->scan_bands == 2) ? "2.4" : "5.2",
+ jiffies_to_msecs(elapsed_jiffies
+ (priv->scan_pass_start, jiffies)));
+
+ /* Remove this scanned band from the list
+ * of pending bands to scan */
+ priv->scan_bands--;
+
+ /* If a request to abort was given, or the scan did not succeed
+ * then we reset the scan state machine and terminate,
+ * re-queuing another scan if one has been requested */
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_INFO("Aborted scan completed.\n");
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ } else {
+ /* If there are more bands on this scan pass reschedule */
+ if (priv->scan_bands > 0)
+ goto reschedule;
+ }
+
+ priv->last_scan_jiffies = jiffies;
+ priv->next_scan_jiffies = 0;
+ IWL_DEBUG_INFO("Setting scan to off\n");
+
+ clear_bit(STATUS_SCANNING, &priv->status);
+
+ IWL_DEBUG_INFO("Scan took %dms\n",
+ jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
+
+ queue_work(priv->workqueue, &priv->scan_completed);
+
+ return;
+
+reschedule:
+ priv->scan_pass_start = jiffies;
+ queue_work(priv->workqueue, &priv->request_scan);
+}
+
+void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
+{
+ /* scan handlers */
+ priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
+ priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
+ priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
+ iwl_rx_scan_results_notif;
+ priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
+ iwl_rx_scan_complete_notif;
+}
+EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
+
+static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band)
+{
+ if (band == IEEE80211_BAND_5GHZ)
+ return IWL_ACTIVE_DWELL_TIME_52;
+ else
+ return IWL_ACTIVE_DWELL_TIME_24;
+}
+
+static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band)
+{
+ u16 active = iwl_get_active_dwell_time(priv, band);
+ u16 passive = (band != IEEE80211_BAND_5GHZ) ?
+ IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
+ IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
+
+ if (iwl_is_associated(priv)) {
+ /* If we're associated, we clamp the maximum passive
+ * dwell time to be 98% of the beacon interval (minus
+ * 2 * channel tune time) */
+ passive = priv->beacon_int;
+ if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
+ passive = IWL_PASSIVE_DWELL_BASE;
+ passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+ }
+
+ if (passive <= active)
+ passive = active + 1;
+
+ return passive;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ u8 is_active, u8 direct_mask,
+ struct iwl_scan_channel *scan_ch)
+{
+ const struct ieee80211_channel *channels = NULL;
+ const struct ieee80211_supported_band *sband;
+ const struct iwl_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband)
+ return 0;
+
+ channels = sband->channels;
+
+ active_dwell = iwl_get_active_dwell_time(priv, band);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+ for (i = 0, added = 0; i < sband->n_channels; i++) {
+ if (channels[i].flags & IEEE80211_CHAN_DISABLED)
+ continue;
+
+ scan_ch->channel =
+ ieee80211_frequency_to_channel(channels[i].center_freq);
+
+ ch_info = iwl_get_channel_info(priv, band,
+ scan_ch->channel);
+ if (!is_channel_valid(ch_info)) {
+ IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+ scan_ch->channel);
+ continue;
+ }
+
+ if (!is_active || is_channel_passive(ch_info) ||
+ (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ scan_ch->type = 0; /* passive */
+ else
+ scan_ch->type = 1; /* active */
+
+ if (scan_ch->type & 1)
+ scan_ch->type |= (direct_mask << 1);
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+ /* Set txpower levels to defaults */
+ scan_ch->tpc.dsp_atten = 110;
+ /* scan_pwr_info->tpc.dsp_atten; */
+
+ /*scan_pwr_info->tpc.tx_gain; */
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else {
+ scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ }
+
+ IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
+ scan_ch->channel,
+ (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
+ (scan_ch->type & 1) ?
+ active_dwell : passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ IWL_DEBUG_SCAN("total channels to scan %d \n", added);
+ return added;
+}
+
+int iwl_scan_initiate(struct iwl_priv *priv)
+{
+ if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
+ IWL_ERROR("APs don't scan.\n");
+ return 0;
+ }
+
+ if (!iwl_is_ready_rf(priv)) {
+ IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
+ return -EIO;
+ }
+
+ if (test_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_SCAN("Scan already in progress.\n");
+ return -EAGAIN;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN("Scan request while abort pending. "
+ "Queuing.\n");
+ return -EAGAIN;
+ }
+
+ IWL_DEBUG_INFO("Starting scan...\n");
+ priv->scan_bands = 2;
+ set_bit(STATUS_SCANNING, &priv->status);
+ priv->scan_start = jiffies;
+ priv->scan_pass_start = priv->scan_start;
+
+ queue_work(priv->workqueue, &priv->request_scan);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_scan_initiate);
+
+#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
+
+static void iwl_bg_scan_check(struct work_struct *data)
+{
+ struct iwl_priv *priv =
+ container_of(data, struct iwl_priv, scan_check.work);
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
+ "adapter (%dms)\n",
+ jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
+
+ if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
+ iwl_send_scan_abort(priv);
+ }
+ mutex_unlock(&priv->mutex);
+}
+/**
+ * iwl_supported_rate_to_ie - fill in the supported rate in IE field
+ *
+ * return : set the bit for each supported rate insert in ie
+ */
+static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
+ u16 basic_rate, int *left)
+{
+ u16 ret_rates = 0, bit;
+ int i;
+ u8 *cnt = ie;
+ u8 *rates = ie + 1;
+
+ for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
+ if (bit & supported_rate) {
+ ret_rates |= bit;
+ rates[*cnt] = iwl_rates[i].ieee |
+ ((bit & basic_rate) ? 0x80 : 0x00);
+ (*cnt)++;
+ (*left)--;
+ if ((*left <= 0) ||
+ (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
+ break;
+ }
+ }
+
+ return ret_rates;
+}
+
+
+static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
+ u8 *pos, int *left)
+{
+ struct ieee80211_ht_cap *ht_cap;
+
+ if (!sband || !sband->ht_info.ht_supported)
+ return;
+
+ if (*left < sizeof(struct ieee80211_ht_cap))
+ return;
+
+ *pos++ = sizeof(struct ieee80211_ht_cap);
+ ht_cap = (struct ieee80211_ht_cap *) pos;
+
+ ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
+ memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
+ ht_cap->ampdu_params_info =
+ (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
+ ((sband->ht_info.ampdu_density << 2) &
+ IEEE80211_HT_CAP_AMPDU_DENSITY);
+ *left -= sizeof(struct ieee80211_ht_cap);
+}
+
+/**
+ * iwl_fill_probe_req - fill in all required fields and IE for probe request
+ */
+static u16 iwl_fill_probe_req(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ struct ieee80211_mgmt *frame,
+ int left, int is_direct)
+{
+ int len = 0;
+ u8 *pos = NULL;
+ u16 active_rates, ret_rates, cck_rates, active_rate_basic;
+ const struct ieee80211_supported_band *sband =
+ iwl_get_hw_mode(priv, band);
+
+ /* Make sure there is enough space for the probe request,
+ * two mandatory IEs and the data */
+ left -= 24;
+ if (left < 0)
+ return 0;
+ len += 24;
+
+ frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+ memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
+ memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
+ memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
+ frame->seq_ctrl = 0;
+
+ /* fill in our indirect SSID IE */
+ /* ...next IE... */
+
+ left -= 2;
+ if (left < 0)
+ return 0;
+ len += 2;
+ pos = &(frame->u.probe_req.variable[0]);
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = 0;
+
+ /* fill in our direct SSID IE... */
+ if (is_direct) {
+ /* ...next IE... */
+ left -= 2 + priv->essid_len;
+ if (left < 0)
+ return 0;
+ /* ... fill it in... */
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = priv->essid_len;
+ memcpy(pos, priv->essid, priv->essid_len);
+ pos += priv->essid_len;
+ len += 2 + priv->essid_len;
+ }
+
+ /* fill in supported rate */
+ /* ...next IE... */
+ left -= 2;
+ if (left < 0)
+ return 0;
+
+ /* ... fill it in... */
+ *pos++ = WLAN_EID_SUPP_RATES;
+ *pos = 0;
+
+ /* exclude 60M rate */
+ active_rates = priv->rates_mask;
+ active_rates &= ~IWL_RATE_60M_MASK;
+
+ active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
+
+ cck_rates = IWL_CCK_RATES_MASK & active_rates;
+ ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
+ active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
+ ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
+ active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
+ len += 2 + *pos;
+ pos += (*pos) + 1;
+ if (active_rates == 0)
+ goto fill_end;
+
+ /* fill in supported extended rate */
+ /* ...next IE... */
+ left -= 2;
+ if (left < 0)
+ return 0;
+ /* ... fill it in... */
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos = 0;
+ iwl_supported_rate_to_ie(pos, active_rates,
+ active_rate_basic, &left);
+ if (*pos > 0)
+ len += 2 + *pos;
+
+ fill_end:
+ /* fill in HT IE */
+ left -= 2;
+ if (left < 0)
+ return 0;
+
+ *pos++ = WLAN_EID_HT_CAPABILITY;
+ *pos = 0;
+
+ iwl_ht_cap_to_ie(sband, pos, &left);
+
+ if (*pos > 0)
+ len += 2 + *pos;
+ return (u16)len;
+}
+
+static void iwl_bg_request_scan(struct work_struct *data)
+{
+ struct iwl_priv *priv =
+ container_of(data, struct iwl_priv, request_scan);
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_CMD,
+ .len = sizeof(struct iwl_scan_cmd),
+ .meta.flags = CMD_SIZE_HUGE,
+ };
+ struct iwl_scan_cmd *scan;
+ struct ieee80211_conf *conf = NULL;
+ u16 cmd_len;
+ enum ieee80211_band band;
+ u8 direct_mask;
+ int ret = 0;
+
+ conf = ieee80211_get_hw_conf(priv->hw);
+
+ mutex_lock(&priv->mutex);
+
+ if (!iwl_is_ready(priv)) {
+ IWL_WARNING("request scan called when driver not ready.\n");
+ goto done;
+ }
+
+ /* Make sure the scan wasn't cancelled before this queued work
+ * was given the chance to run... */
+ if (!test_bit(STATUS_SCANNING, &priv->status))
+ goto done;
+
+ /* This should never be called or scheduled if there is currently
+ * a scan active in the hardware. */
+ if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+ IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
+ "Ignoring second request.\n");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
+ goto done;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
+ goto done;
+ }
+
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
+ goto done;
+ }
+
+ if (!test_bit(STATUS_READY, &priv->status)) {
+ IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
+ goto done;
+ }
+
+ if (!priv->scan_bands) {
+ IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
+ goto done;
+ }
+
+ if (!priv->scan) {
+ priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) +
+ IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+ if (!priv->scan) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ }
+ scan = priv->scan;
+ memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+ scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+ if (iwl_is_associated(priv)) {
+ u16 interval = 0;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+ unsigned long flags;
+
+ IWL_DEBUG_INFO("Scanning while associated...\n");
+
+ spin_lock_irqsave(&priv->lock, flags);
+ interval = priv->beacon_int;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+
+ extra = (suspend_time / interval) << 22;
+ scan_suspend_time = (extra |
+ ((suspend_time % interval) * 1024));
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ /* We should add the ability for user to lock to PASSIVE ONLY */
+ if (priv->one_direct_scan) {
+ IWL_DEBUG_SCAN
+ ("Kicking off one direct scan for '%s'\n",
+ iwl_escape_essid(priv->direct_ssid,
+ priv->direct_ssid_len));
+ scan->direct_scan[0].id = WLAN_EID_SSID;
+ scan->direct_scan[0].len = priv->direct_ssid_len;
+ memcpy(scan->direct_scan[0].ssid,
+ priv->direct_ssid, priv->direct_ssid_len);
+ direct_mask = 1;
+ } else if (!iwl_is_associated(priv) && priv->essid_len) {
+ IWL_DEBUG_SCAN
+ ("Kicking off one direct scan for '%s' when not associated\n",
+ iwl_escape_essid(priv->essid, priv->essid_len));
+ scan->direct_scan[0].id = WLAN_EID_SSID;
+ scan->direct_scan[0].len = priv->essid_len;
+ memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
+ direct_mask = 1;
+ } else {
+ IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
+ direct_mask = 0;
+ }
+
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+
+ switch (priv->scan_bands) {
+ case 2:
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ scan->tx_cmd.rate_n_flags =
+ iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
+ RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK);
+
+ scan->good_CRC_th = 0;
+ band = IEEE80211_BAND_2GHZ;
+ break;
+
+ case 1:
+ scan->tx_cmd.rate_n_flags =
+ iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
+ RATE_MCS_ANT_B_MSK);
+ scan->good_CRC_th = IWL_GOOD_CRC_TH;
+ band = IEEE80211_BAND_5GHZ;
+ break;
+
+ default:
+ IWL_WARNING("Invalid scan band count\n");
+ goto done;
+ }
+
+ /* We don't build a direct scan probe request; the uCode will do
+ * that based on the direct_mask added to each channel entry */
+ cmd_len = iwl_fill_probe_req(priv, band,
+ (struct ieee80211_mgmt *)scan->data,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan), 0);
+
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
+ /* select Rx chains */
+
+ /* Force use of chains B and C (0x6) for scan Rx.
+ * Avoid A (0x1) because of its off-channel reception on A-band.
+ * MIMO is not used here, but value is required to make uCode happy. */
+ scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
+ cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
+ (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) |
+ (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
+
+ if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
+ scan->filter_flags = RXON_FILTER_PROMISC_MSK;
+
+ if (direct_mask)
+ scan->channel_count =
+ iwl_get_channels_for_scan(
+ priv, band, 1, /* active */
+ direct_mask,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+ else
+ scan->channel_count =
+ iwl_get_channels_for_scan(
+ priv, band, 0, /* passive */
+ direct_mask,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+
+ scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+ RXON_FILTER_BCON_AWARE_MSK);
+ cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct iwl_scan_channel);
+ cmd.data = scan;
+ scan->len = cpu_to_le16(cmd.len);
+
+ set_bit(STATUS_SCAN_HW, &priv->status);
+ ret = iwl_send_cmd_sync(priv, &cmd);
+ if (ret)
+ goto done;
+
+ queue_delayed_work(priv->workqueue, &priv->scan_check,
+ IWL_SCAN_CHECK_WATCHDOG);
+
+ mutex_unlock(&priv->mutex);
+ return;
+
+ done:
+ /* inform mac80211 scan aborted */
+ queue_work(priv->workqueue, &priv->scan_completed);
+ mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_abort_scan(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ mutex_lock(&priv->mutex);
+
+ set_bit(STATUS_SCAN_ABORTING, &priv->status);
+ iwl_send_scan_abort(priv);
+
+ mutex_unlock(&priv->mutex);
+}
+
+void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
+{
+ /* FIXME: move here when resolved PENDING
+ * INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); */
+ INIT_WORK(&priv->request_scan, iwl_bg_request_scan);
+ INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+ INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
+}
+EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
+
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
-static int iwl4965_is_empty_essid(const char *essid, int essid_len)
-{
- /* Single white space is for Linksys APs */
- if (essid_len == 1 && essid[0] == ' ')
- return 1;
-
- /* Otherwise, if the entire essid is 0, we assume it is hidden */
- while (essid_len) {
- essid_len--;
- if (essid[essid_len] != '\0')
- return 0;
- }
-
- return 1;
-}
-
-static const char *iwl4965_escape_essid(const char *essid, u8 essid_len)
-{
- static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
- const char *s = essid;
- char *d = escaped;
-
- if (iwl4965_is_empty_essid(essid, essid_len)) {
- memcpy(escaped, "<hidden>", sizeof("<hidden>"));
- return escaped;
- }
-
- essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
- while (essid_len--) {
- if (*s == '\0') {
- *d++ = '\\';
- *d++ = '0';
- s++;
- } else
- *d++ = *s++;
- }
- *d = '\0';
- return escaped;
-}
-
/*************** STATION TABLE MANAGEMENT ****
* mac80211 should be examined to determine if sta_info is duplicating
* the functionality provided here
sizeof(struct iwl4965_bt_cmd), &bt_cmd);
}
-static int iwl4965_send_scan_abort(struct iwl_priv *priv)
-{
- int ret = 0;
- struct iwl_rx_packet *res;
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_ABORT_CMD,
- .meta.flags = CMD_WANT_SKB,
- };
-
- /* If there isn't a scan actively going on in the hardware
- * then we are in between scan bands and not actually
- * actively scanning, so don't send the abort command */
- if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- return 0;
- }
-
- ret = iwl_send_cmd_sync(priv, &cmd);
- if (ret) {
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- return ret;
- }
-
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
- if (res->u.status != CAN_ABORT_STATUS) {
- /* The scan abort will return 1 for success or
- * 2 for "failure". A failure condition can be
- * due to simply not being in an active scan which
- * can occur if we send the scan abort before we
- * the microcode has notified us that a scan is
- * completed. */
- IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- clear_bit(STATUS_SCAN_HW, &priv->status);
- }
-
- dev_kfree_skb_any(cmd.meta.u.skb);
-
- return ret;
-}
-
/*
* CARD_STATE_CMD
*
*
******************************************************************************/
-/**
- * iwl4965_supported_rate_to_ie - fill in the supported rate in IE field
- *
- * return : set the bit for each supported rate insert in ie
- */
-static u16 iwl4965_supported_rate_to_ie(u8 *ie, u16 supported_rate,
- u16 basic_rate, int *left)
-{
- u16 ret_rates = 0, bit;
- int i;
- u8 *cnt = ie;
- u8 *rates = ie + 1;
-
- for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
- if (bit & supported_rate) {
- ret_rates |= bit;
- rates[*cnt] = iwl_rates[i].ieee |
- ((bit & basic_rate) ? 0x80 : 0x00);
- (*cnt)++;
- (*left)--;
- if ((*left <= 0) ||
- (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
- break;
- }
- }
-
- return ret_rates;
-}
-
static void iwl4965_ht_conf(struct iwl_priv *priv,
struct ieee80211_bss_conf *bss_conf)
{
IWL_DEBUG_MAC80211("leave\n");
}
-static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
- u8 *pos, int *left)
-{
- struct ieee80211_ht_cap *ht_cap;
-
- if (!sband || !sband->ht_info.ht_supported)
- return;
-
- if (*left < sizeof(struct ieee80211_ht_cap))
- return;
-
- *pos++ = sizeof(struct ieee80211_ht_cap);
- ht_cap = (struct ieee80211_ht_cap *) pos;
-
- ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
- memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
- ht_cap->ampdu_params_info =
- (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
- ((sband->ht_info.ampdu_density << 2) &
- IEEE80211_HT_CAP_AMPDU_DENSITY);
- *left -= sizeof(struct ieee80211_ht_cap);
-}
-
-/**
- * iwl4965_fill_probe_req - fill in all required fields and IE for probe request
- */
-static u16 iwl4965_fill_probe_req(struct iwl_priv *priv,
- enum ieee80211_band band,
- struct ieee80211_mgmt *frame,
- int left, int is_direct)
-{
- int len = 0;
- u8 *pos = NULL;
- u16 active_rates, ret_rates, cck_rates, active_rate_basic;
- const struct ieee80211_supported_band *sband =
- iwl_get_hw_mode(priv, band);
-
- /* Make sure there is enough space for the probe request,
- * two mandatory IEs and the data */
- left -= 24;
- if (left < 0)
- return 0;
- len += 24;
-
- frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
- memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
- memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
- memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
- frame->seq_ctrl = 0;
-
- /* fill in our indirect SSID IE */
- /* ...next IE... */
-
- left -= 2;
- if (left < 0)
- return 0;
- len += 2;
- pos = &(frame->u.probe_req.variable[0]);
- *pos++ = WLAN_EID_SSID;
- *pos++ = 0;
-
- /* fill in our direct SSID IE... */
- if (is_direct) {
- /* ...next IE... */
- left -= 2 + priv->essid_len;
- if (left < 0)
- return 0;
- /* ... fill it in... */
- *pos++ = WLAN_EID_SSID;
- *pos++ = priv->essid_len;
- memcpy(pos, priv->essid, priv->essid_len);
- pos += priv->essid_len;
- len += 2 + priv->essid_len;
- }
-
- /* fill in supported rate */
- /* ...next IE... */
- left -= 2;
- if (left < 0)
- return 0;
-
- /* ... fill it in... */
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos = 0;
-
- /* exclude 60M rate */
- active_rates = priv->rates_mask;
- active_rates &= ~IWL_RATE_60M_MASK;
-
- active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
-
- cck_rates = IWL_CCK_RATES_MASK & active_rates;
- ret_rates = iwl4965_supported_rate_to_ie(pos, cck_rates,
- active_rate_basic, &left);
- active_rates &= ~ret_rates;
-
- ret_rates = iwl4965_supported_rate_to_ie(pos, active_rates,
- active_rate_basic, &left);
- active_rates &= ~ret_rates;
-
- len += 2 + *pos;
- pos += (*pos) + 1;
- if (active_rates == 0)
- goto fill_end;
-
- /* fill in supported extended rate */
- /* ...next IE... */
- left -= 2;
- if (left < 0)
- return 0;
- /* ... fill it in... */
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos = 0;
- iwl4965_supported_rate_to_ie(pos, active_rates,
- active_rate_basic, &left);
- if (*pos > 0)
- len += 2 + *pos;
-
- fill_end:
- /* fill in HT IE */
- left -= 2;
- if (left < 0)
- return 0;
-
- *pos++ = WLAN_EID_HT_CAPABILITY;
- *pos = 0;
-
- iwl_ht_cap_to_ie(sband, pos, &left);
-
- if (*pos > 0)
- len += 2 + *pos;
- return (u16)len;
-}
-
/*
* QoS support
*/
return 1;
}
-
-
-/**
- * iwl4965_scan_cancel - Cancel any currently executing HW scan
- *
- * NOTE: priv->mutex is not required before calling this function
- */
-static int iwl4965_scan_cancel(struct iwl_priv *priv)
-{
- if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
- clear_bit(STATUS_SCANNING, &priv->status);
- return 0;
- }
-
- if (test_bit(STATUS_SCANNING, &priv->status)) {
- if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_SCAN("Queuing scan abort.\n");
- set_bit(STATUS_SCAN_ABORTING, &priv->status);
- queue_work(priv->workqueue, &priv->abort_scan);
-
- } else
- IWL_DEBUG_SCAN("Scan abort already in progress.\n");
-
- return test_bit(STATUS_SCANNING, &priv->status);
- }
-
- return 0;
-}
-
-/**
- * iwl4965_scan_cancel_timeout - Cancel any currently executing HW scan
- * @ms: amount of time to wait (in milliseconds) for scan to abort
- *
- * NOTE: priv->mutex must be held before calling this function
- */
-static int iwl4965_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
-{
- unsigned long now = jiffies;
- int ret;
-
- ret = iwl4965_scan_cancel(priv);
- if (ret && ms) {
- mutex_unlock(&priv->mutex);
- while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
- test_bit(STATUS_SCANNING, &priv->status))
- msleep(1);
- mutex_lock(&priv->mutex);
-
- return test_bit(STATUS_SCANNING, &priv->status);
- }
-
- return ret;
-}
-
static void iwl4965_sequence_reset(struct iwl_priv *priv)
{
/* Reset ieee stats */
priv->last_frag_num = -1;
priv->last_packet_time = 0;
- iwl4965_scan_cancel(priv);
+ iwl_scan_cancel(priv);
}
#define MAX_UCODE_BEACON_INTERVAL 4096
le16_to_cpu(priv->rxon_timing.atim_window));
}
-static int iwl4965_scan_initiate(struct iwl_priv *priv)
-{
- if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
- IWL_ERROR("APs don't scan.\n");
- return 0;
- }
-
- if (!iwl_is_ready_rf(priv)) {
- IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
- return -EIO;
- }
-
- if (test_bit(STATUS_SCANNING, &priv->status)) {
- IWL_DEBUG_SCAN("Scan already in progress.\n");
- return -EAGAIN;
- }
-
- if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_SCAN("Scan request while abort pending. "
- "Queuing.\n");
- return -EAGAIN;
- }
-
- IWL_DEBUG_INFO("Starting scan...\n");
- priv->scan_bands = 2;
- set_bit(STATUS_SCANNING, &priv->status);
- priv->scan_start = jiffies;
- priv->scan_pass_start = priv->scan_start;
-
- queue_work(priv->workqueue, &priv->request_scan);
-
- return 0;
-}
-
-
static void iwl_set_flags_for_band(struct iwl_priv *priv,
enum ieee80211_band band)
{
return -EAGAIN;
cancel_delayed_work(&priv->scan_check);
- if (iwl4965_scan_cancel_timeout(priv, 100)) {
+ if (iwl_scan_cancel_timeout(priv, 100)) {
IWL_WARNING("Aborted scan still in progress after 100ms\n");
IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
return -EAGAIN;
disable_radio ? "OFF" : "ON");
if (disable_radio) {
- iwl4965_scan_cancel(priv);
+ iwl_scan_cancel(priv);
/* FIXME: This is a workaround for AP */
if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
spin_lock_irqsave(&priv->lock, flags);
queue_work(priv->workqueue, &priv->beacon_update);
}
-/* Service response to REPLY_SCAN_CMD (0x80) */
-static void iwl4965_rx_reply_scan(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
- struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- struct iwl4965_scanreq_notification *notif =
- (struct iwl4965_scanreq_notification *)pkt->u.raw;
-
- IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
-#endif
-}
-
-/* Service SCAN_START_NOTIFICATION (0x82) */
-static void iwl4965_rx_scan_start_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- struct iwl4965_scanstart_notification *notif =
- (struct iwl4965_scanstart_notification *)pkt->u.raw;
- priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
- IWL_DEBUG_SCAN("Scan start: "
- "%d [802.11%s] "
- "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
- notif->channel,
- notif->band ? "bg" : "a",
- notif->tsf_high,
- notif->tsf_low, notif->status, notif->beacon_timer);
-}
-
-/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
-static void iwl4965_rx_scan_results_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- struct iwl4965_scanresults_notification *notif =
- (struct iwl4965_scanresults_notification *)pkt->u.raw;
-
- IWL_DEBUG_SCAN("Scan ch.res: "
- "%d [802.11%s] "
- "(TSF: 0x%08X:%08X) - %d "
- "elapsed=%lu usec (%dms since last)\n",
- notif->channel,
- notif->band ? "bg" : "a",
- le32_to_cpu(notif->tsf_high),
- le32_to_cpu(notif->tsf_low),
- le32_to_cpu(notif->statistics[0]),
- le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
- jiffies_to_msecs(elapsed_jiffies
- (priv->last_scan_jiffies, jiffies)));
-
- priv->last_scan_jiffies = jiffies;
- priv->next_scan_jiffies = 0;
-}
-
-/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
-static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- struct iwl4965_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
-
- IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
- scan_notif->scanned_channels,
- scan_notif->tsf_low,
- scan_notif->tsf_high, scan_notif->status);
-
- /* The HW is no longer scanning */
- clear_bit(STATUS_SCAN_HW, &priv->status);
-
- /* The scan completion notification came in, so kill that timer... */
- cancel_delayed_work(&priv->scan_check);
-
- IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
- (priv->scan_bands == 2) ? "2.4" : "5.2",
- jiffies_to_msecs(elapsed_jiffies
- (priv->scan_pass_start, jiffies)));
-
- /* Remove this scanned band from the list
- * of pending bands to scan */
- priv->scan_bands--;
-
- /* If a request to abort was given, or the scan did not succeed
- * then we reset the scan state machine and terminate,
- * re-queuing another scan if one has been requested */
- if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_INFO("Aborted scan completed.\n");
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- } else {
- /* If there are more bands on this scan pass reschedule */
- if (priv->scan_bands > 0)
- goto reschedule;
- }
-
- priv->last_scan_jiffies = jiffies;
- priv->next_scan_jiffies = 0;
- IWL_DEBUG_INFO("Setting scan to off\n");
-
- clear_bit(STATUS_SCANNING, &priv->status);
-
- IWL_DEBUG_INFO("Scan took %dms\n",
- jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
-
- queue_work(priv->workqueue, &priv->scan_completed);
-
- return;
-
-reschedule:
- priv->scan_pass_start = jiffies;
- queue_work(priv->workqueue, &priv->request_scan);
-}
-
/* Handle notification from uCode that card's power state is changing
* due to software, hardware, or critical temperature RFKILL */
static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
clear_bit(STATUS_RF_KILL_SW, &priv->status);
if (!(flags & RXON_CARD_DISABLED))
- iwl4965_scan_cancel(priv);
+ iwl_scan_cancel(priv);
if ((test_bit(STATUS_RF_KILL_HW, &status) !=
test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
*/
priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_hw_rx_statistics;
priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_hw_rx_statistics;
- /* scan handlers */
- priv->rx_handlers[REPLY_SCAN_CMD] = iwl4965_rx_reply_scan;
- priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl4965_rx_scan_start_notif;
- priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
- iwl4965_rx_scan_results_notif;
- priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
- iwl4965_rx_scan_complete_notif;
+
+ iwl_setup_rx_scan_handlers(priv);
+
/* status change handler */
priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif;
return IRQ_NONE;
}
-/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
- * sending probe req. This should be set long enough to hear probe responses
- * from more than one AP. */
-#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
-#define IWL_ACTIVE_DWELL_TIME_52 (10)
-
-/* For faster active scanning, scan will move to the next channel if fewer than
- * PLCP_QUIET_THRESH packets are heard on this channel within
- * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
- * time if it's a quiet channel (nothing responded to our probe, and there's
- * no other traffic).
- * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
-#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
-#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
-
-/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
- * Must be set longer than active dwell time.
- * For the most reliable scan, set > AP beacon interval (typically 100msec). */
-#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
-#define IWL_PASSIVE_DWELL_TIME_52 (10)
-#define IWL_PASSIVE_DWELL_BASE (100)
-#define IWL_CHANNEL_TUNE_TIME 5
-
-static inline u16 iwl4965_get_active_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band)
-{
- if (band == IEEE80211_BAND_5GHZ)
- return IWL_ACTIVE_DWELL_TIME_52;
- else
- return IWL_ACTIVE_DWELL_TIME_24;
-}
-
-static u16 iwl4965_get_passive_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band)
-{
- u16 active = iwl4965_get_active_dwell_time(priv, band);
- u16 passive = (band != IEEE80211_BAND_5GHZ) ?
- IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
- IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
-
- if (iwl_is_associated(priv)) {
- /* If we're associated, we clamp the maximum passive
- * dwell time to be 98% of the beacon interval (minus
- * 2 * channel tune time) */
- passive = priv->beacon_int;
- if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
- passive = IWL_PASSIVE_DWELL_BASE;
- passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
- }
-
- if (passive <= active)
- passive = active + 1;
-
- return passive;
-}
-
-static int iwl4965_get_channels_for_scan(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 is_active, u8 direct_mask,
- struct iwl4965_scan_channel *scan_ch)
-{
- const struct ieee80211_channel *channels = NULL;
- const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added, i;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband)
- return 0;
-
- channels = sband->channels;
-
- active_dwell = iwl4965_get_active_dwell_time(priv, band);
- passive_dwell = iwl4965_get_passive_dwell_time(priv, band);
-
- for (i = 0, added = 0; i < sband->n_channels; i++) {
- if (channels[i].flags & IEEE80211_CHAN_DISABLED)
- continue;
-
- scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq);
-
- ch_info = iwl_get_channel_info(priv, band,
- scan_ch->channel);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
- scan_ch->channel);
- continue;
- }
-
- if (!is_active || is_channel_passive(ch_info) ||
- (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
- scan_ch->type = 0; /* passive */
- else
- scan_ch->type = 1; /* active */
-
- if (scan_ch->type & 1)
- scan_ch->type |= (direct_mask << 1);
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-
- /* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- /* scan_pwr_info->tpc.dsp_atten; */
-
- /*scan_pwr_info->tpc.tx_gain; */
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else {
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
- /* NOTE: if we were doing 6Mb OFDM for scans we'd use
- * power level:
- * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
- */
- }
-
- IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
- scan_ch->channel,
- (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
- (scan_ch->type & 1) ?
- active_dwell : passive_dwell);
-
- scan_ch++;
- added++;
- }
-
- IWL_DEBUG_SCAN("total channels to scan %d \n", added);
- return added;
-}
-
/******************************************************************************
*
* uCode download functions
mutex_unlock(&priv->mutex);
}
-#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
-
-static void iwl4965_bg_scan_check(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, scan_check.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- if (test_bit(STATUS_SCANNING, &priv->status) ||
- test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
- "adapter (%dms)\n",
- jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
-
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- iwl4965_send_scan_abort(priv);
- }
- mutex_unlock(&priv->mutex);
-}
-
-static void iwl4965_bg_request_scan(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, request_scan);
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_CMD,
- .len = sizeof(struct iwl4965_scan_cmd),
- .meta.flags = CMD_SIZE_HUGE,
- };
- struct iwl4965_scan_cmd *scan;
- struct ieee80211_conf *conf = NULL;
- u16 cmd_len;
- enum ieee80211_band band;
- u8 direct_mask;
- int ret = 0;
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- mutex_lock(&priv->mutex);
-
- if (!iwl_is_ready(priv)) {
- IWL_WARNING("request scan called when driver not ready.\n");
- goto done;
- }
-
- /* Make sure the scan wasn't cancelled before this queued work
- * was given the chance to run... */
- if (!test_bit(STATUS_SCANNING, &priv->status))
- goto done;
-
- /* This should never be called or scheduled if there is currently
- * a scan active in the hardware. */
- if (test_bit(STATUS_SCAN_HW, &priv->status)) {
- IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
- "Ignoring second request.\n");
- ret = -EIO;
- goto done;
- }
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
- goto done;
- }
-
- if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
- goto done;
- }
-
- if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
- goto done;
- }
-
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
- goto done;
- }
-
- if (!priv->scan_bands) {
- IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
- goto done;
- }
-
- if (!priv->scan) {
- priv->scan = kmalloc(sizeof(struct iwl4965_scan_cmd) +
- IWL_MAX_SCAN_SIZE, GFP_KERNEL);
- if (!priv->scan) {
- ret = -ENOMEM;
- goto done;
- }
- }
- scan = priv->scan;
- memset(scan, 0, sizeof(struct iwl4965_scan_cmd) + IWL_MAX_SCAN_SIZE);
-
- scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
- scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
- if (iwl_is_associated(priv)) {
- u16 interval = 0;
- u32 extra;
- u32 suspend_time = 100;
- u32 scan_suspend_time = 100;
- unsigned long flags;
-
- IWL_DEBUG_INFO("Scanning while associated...\n");
-
- spin_lock_irqsave(&priv->lock, flags);
- interval = priv->beacon_int;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(200 * 1024);
- if (!interval)
- interval = suspend_time;
-
- extra = (suspend_time / interval) << 22;
- scan_suspend_time = (extra |
- ((suspend_time % interval) * 1024));
- scan->suspend_time = cpu_to_le32(scan_suspend_time);
- IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
- scan_suspend_time, interval);
- }
-
- /* We should add the ability for user to lock to PASSIVE ONLY */
- if (priv->one_direct_scan) {
- IWL_DEBUG_SCAN
- ("Kicking off one direct scan for '%s'\n",
- iwl4965_escape_essid(priv->direct_ssid,
- priv->direct_ssid_len));
- scan->direct_scan[0].id = WLAN_EID_SSID;
- scan->direct_scan[0].len = priv->direct_ssid_len;
- memcpy(scan->direct_scan[0].ssid,
- priv->direct_ssid, priv->direct_ssid_len);
- direct_mask = 1;
- } else if (!iwl_is_associated(priv) && priv->essid_len) {
- IWL_DEBUG_SCAN
- ("Kicking off one direct scan for '%s' when not associated\n",
- iwl4965_escape_essid(priv->essid, priv->essid_len));
- scan->direct_scan[0].id = WLAN_EID_SSID;
- scan->direct_scan[0].len = priv->essid_len;
- memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
- direct_mask = 1;
- } else {
- IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
- direct_mask = 0;
- }
-
- scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
- scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
- scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-
- switch (priv->scan_bands) {
- case 2:
- scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- scan->tx_cmd.rate_n_flags =
- iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
- RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK);
-
- scan->good_CRC_th = 0;
- band = IEEE80211_BAND_2GHZ;
- break;
-
- case 1:
- scan->tx_cmd.rate_n_flags =
- iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
- RATE_MCS_ANT_B_MSK);
- scan->good_CRC_th = IWL_GOOD_CRC_TH;
- band = IEEE80211_BAND_5GHZ;
- break;
-
- default:
- IWL_WARNING("Invalid scan band count\n");
- goto done;
- }
-
- /* We don't build a direct scan probe request; the uCode will do
- * that based on the direct_mask added to each channel entry */
- cmd_len = iwl4965_fill_probe_req(priv, band,
- (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(*scan), 0);
-
- scan->tx_cmd.len = cpu_to_le16(cmd_len);
- /* select Rx chains */
-
- /* Force use of chains B and C (0x6) for scan Rx.
- * Avoid A (0x1) because of its off-channel reception on A-band.
- * MIMO is not used here, but value is required to make uCode happy. */
- scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
- cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
- (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) |
- (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
-
- if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
- scan->filter_flags = RXON_FILTER_PROMISC_MSK;
-
- if (direct_mask)
- scan->channel_count =
- iwl4965_get_channels_for_scan(
- priv, band, 1, /* active */
- direct_mask,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
- else
- scan->channel_count =
- iwl4965_get_channels_for_scan(
- priv, band, 0, /* passive */
- direct_mask,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
-
- scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
- RXON_FILTER_BCON_AWARE_MSK);
- cmd.len += le16_to_cpu(scan->tx_cmd.len) +
- scan->channel_count * sizeof(struct iwl4965_scan_channel);
- cmd.data = scan;
- scan->len = cpu_to_le16(cmd.len);
-
- set_bit(STATUS_SCAN_HW, &priv->status);
- ret = iwl_send_cmd_sync(priv, &cmd);
- if (ret)
- goto done;
-
- queue_delayed_work(priv->workqueue, &priv->scan_check,
- IWL_SCAN_CHECK_WATCHDOG);
-
- mutex_unlock(&priv->mutex);
- return;
-
- done:
- /* inform mac80211 scan aborted */
- queue_work(priv->workqueue, &priv->scan_completed);
- mutex_unlock(&priv->mutex);
-}
-
static void iwl_bg_run_time_calib_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
if (!priv->vif || !priv->is_open)
return;
- iwl4965_scan_cancel_timeout(priv, 200);
+ iwl_scan_cancel_timeout(priv, 200);
conf = ieee80211_get_hw_conf(priv->hw);
}
-static void iwl4965_bg_abort_scan(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
-
- if (!iwl_is_ready(priv))
- return;
-
- mutex_lock(&priv->mutex);
-
- set_bit(STATUS_SCAN_ABORTING, &priv->status);
- iwl4965_send_scan_abort(priv);
-
- mutex_unlock(&priv->mutex);
-}
-
static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
-static void iwl4965_bg_scan_completed(struct work_struct *work)
+static void iwl_bg_scan_completed(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, scan_completed);
* RXON_FILTER_ASSOC_MSK BIT
*/
mutex_lock(&priv->mutex);
- iwl4965_scan_cancel_timeout(priv, 100);
+ iwl_scan_cancel_timeout(priv, 100);
cancel_delayed_work(&priv->post_associate);
mutex_unlock(&priv->mutex);
}
!is_multicast_ether_addr(conf->bssid)) {
/* If there is currently a HW scan going on in the background
* then we need to cancel it else the RXON below will fail. */
- if (iwl4965_scan_cancel_timeout(priv, 100)) {
+ if (iwl_scan_cancel_timeout(priv, 100)) {
IWL_WARNING("Aborted scan still in progress "
"after 100ms\n");
IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
}
} else {
- iwl4965_scan_cancel_timeout(priv, 100);
+ iwl_scan_cancel_timeout(priv, 100);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwl4965_commit_rxon(priv);
}
mutex_lock(&priv->mutex);
if (iwl_is_ready_rf(priv)) {
- iwl4965_scan_cancel_timeout(priv, 100);
+ iwl_scan_cancel_timeout(priv, 100);
cancel_delayed_work(&priv->post_associate);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwl4965_commit_rxon(priv);
}
if (len) {
IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
- iwl4965_escape_essid(ssid, len), (int)len);
+ iwl_escape_essid(ssid, len), (int)len);
priv->one_direct_scan = 1;
priv->direct_ssid_len = (u8)
} else
priv->one_direct_scan = 0;
- rc = iwl4965_scan_initiate(priv);
+ rc = iwl_scan_initiate(priv);
IWL_DEBUG_MAC80211("leave\n");
return;
}
- iwl4965_scan_cancel_timeout(priv, 100);
+ iwl_scan_cancel_timeout(priv, 100);
key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
}
mutex_lock(&priv->mutex);
- iwl4965_scan_cancel_timeout(priv, 100);
+ iwl_scan_cancel_timeout(priv, 100);
mutex_unlock(&priv->mutex);
/* If we are getting WEP group key and we didn't receive any key mapping
* clear RXON_FILTER_ASSOC_MSK bit
*/
if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
- iwl4965_scan_cancel_timeout(priv, 100);
+ iwl_scan_cancel_timeout(priv, 100);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwl4965_commit_rxon(priv);
}
mutex_lock(&priv->mutex);
if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
/* Cancel any currently running scans... */
- if (iwl4965_scan_cancel_timeout(priv, 100))
+ if (iwl_scan_cancel_timeout(priv, 100))
IWL_WARNING("Could not cancel scan.\n");
else {
IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
mutex_lock(&priv->mutex);
if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
/* Cancel any currently running scans... */
- if (iwl4965_scan_cancel_timeout(priv, 100))
+ if (iwl_scan_cancel_timeout(priv, 100))
IWL_WARNING("Could not cancel scan.\n");
else {
IWL_DEBUG_INFO("Committing rxon.filter_flags = "
INIT_WORK(&priv->up, iwl4965_bg_up);
INIT_WORK(&priv->restart, iwl4965_bg_restart);
INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish);
- INIT_WORK(&priv->scan_completed, iwl4965_bg_scan_completed);
- INIT_WORK(&priv->request_scan, iwl4965_bg_request_scan);
- INIT_WORK(&priv->abort_scan, iwl4965_bg_abort_scan);
INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill);
INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update);
INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor);
INIT_DELAYED_WORK(&priv->post_associate, iwl4965_bg_post_associate);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
- INIT_DELAYED_WORK(&priv->scan_check, iwl4965_bg_scan_check);
+
+ /* FIXME : remove when resolved PENDING */
+ INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
+ iwl_setup_scan_deferred_work(priv);
if (priv->cfg->ops->lib->setup_deferred_work)
priv->cfg->ops->lib->setup_deferred_work(priv);
projects / linux-2.6-omap-h63xx.git / commitdiff