x86: unify ack_apic_edge

use code in 64 to replace
	move_native_irq(irq, desc);
in 32 bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 099696109ca80f6cd80c91b660f15d4cbac70d2c..a466b04ad5a42272c4c4d2ffbeb93bf3d5bbdb99 100644 (file)
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -389,7 +389,6 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
        writel(value, &io_apic->data);
 }
 
-#ifdef CONFIG_X86_64
 static bool io_apic_level_ack_pending(unsigned int irq)
 {
        struct irq_pin_list *entry;
@@ -419,7 +418,6 @@ static bool io_apic_level_ack_pending(unsigned int irq)
 
        return false;
 }
-#endif
 
 union entry_union {
        struct { u32 w1, w2; };
@@ -2398,9 +2396,16 @@ static void ack_apic_edge(unsigned int irq)
        ack_APIC_irq();
 }
 
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_32
+atomic_t irq_mis_count;
+#endif
+
 static void ack_apic_level(unsigned int irq)
 {
+#ifdef CONFIG_X86_32
+       unsigned long v;
+       int i;
+#endif
        int do_unmask_irq = 0;
 
        irq_complete_move(irq);
@@ -2412,6 +2417,31 @@ static void ack_apic_level(unsigned int irq)
        }
 #endif
 
+#ifdef CONFIG_X86_32
+       /*
+       * It appears there is an erratum which affects at least version 0x11
+       * of I/O APIC (that's the 82093AA and cores integrated into various
+       * chipsets).  Under certain conditions a level-triggered interrupt is
+       * erroneously delivered as edge-triggered one but the respective IRR
+       * bit gets set nevertheless.  As a result the I/O unit expects an EOI
+       * message but it will never arrive and further interrupts are blocked
+       * from the source.  The exact reason is so far unknown, but the
+       * phenomenon was observed when two consecutive interrupt requests
+       * from a given source get delivered to the same CPU and the source is
+       * temporarily disabled in between.
+       *
+       * A workaround is to simulate an EOI message manually.  We achieve it
+       * by setting the trigger mode to edge and then to level when the edge
+       * trigger mode gets detected in the TMR of a local APIC for a
+       * level-triggered interrupt.  We mask the source for the time of the
+       * operation to prevent an edge-triggered interrupt escaping meanwhile.
+       * The idea is from Manfred Spraul.  --macro
+       */
+       i = irq_cfg(irq)->vector;
+
+       v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
+#endif
+
        /*
         * We must acknowledge the irq before we move it or the acknowledge will
         * not propagate properly.
@@ -2450,41 +2480,8 @@ static void ack_apic_level(unsigned int irq)
                        move_masked_irq(irq);
                unmask_IO_APIC_irq(irq);
        }
-}
-#else
-atomic_t irq_mis_count;
-static void ack_apic_level(unsigned int irq)
-{
-       unsigned long v;
-       int i;
-
-       irq_complete_move(irq);
-       move_native_irq(irq);
-       /*
-       * It appears there is an erratum which affects at least version 0x11
-       * of I/O APIC (that's the 82093AA and cores integrated into various
-       * chipsets).  Under certain conditions a level-triggered interrupt is
-       * erroneously delivered as edge-triggered one but the respective IRR
-       * bit gets set nevertheless.  As a result the I/O unit expects an EOI
-       * message but it will never arrive and further interrupts are blocked
-       * from the source.  The exact reason is so far unknown, but the
-       * phenomenon was observed when two consecutive interrupt requests
-       * from a given source get delivered to the same CPU and the source is
-       * temporarily disabled in between.
-       *
-       * A workaround is to simulate an EOI message manually.  We achieve it
-       * by setting the trigger mode to edge and then to level when the edge
-       * trigger mode gets detected in the TMR of a local APIC for a
-       * level-triggered interrupt.  We mask the source for the time of the
-       * operation to prevent an edge-triggered interrupt escaping meanwhile.
-       * The idea is from Manfred Spraul.  --macro
-       */
-       i = irq_cfg(irq)->vector;
-
-       v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-
-       ack_APIC_irq();
 
+#ifdef CONFIG_X86_32
        if (!(v & (1 << (i & 0x1f)))) {
                atomic_inc(&irq_mis_count);
                spin_lock(&ioapic_lock);
@@ -2492,8 +2489,8 @@ static void ack_apic_level(unsigned int irq)
                __unmask_and_level_IO_APIC_irq(irq);
                spin_unlock(&ioapic_lock);
        }
-}
 #endif
+}
 
 static struct irq_chip ioapic_chip __read_mostly = {
        .name           = "IO-APIC",