#define MMCONFIG_APER_MIN      (2 * 1024*1024)
 #define MMCONFIG_APER_MAX      (256 * 1024*1024)
 
-/* Verify the first 16 busses. We assume that systems with more busses
-   get MCFG right. */
-#define PCI_MMCFG_MAX_CHECK_BUS 16
-
 DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
 
 /* K8 systems have some devices (typically in the builtin northbridge)
    and assigning suitable _SEGs, but this isn't implemented in some BIOS.
    Instead try to discover all devices on bus 0 that are unreachable using MM
    and fallback for them. */
-static __init void unreachable_devices(void)
+static void __init unreachable_devices(void)
 {
-       int i, k;
+       int i, bus;
        /* Use the max bus number from ACPI here? */
-       for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) {
+       for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) {
                for (i = 0; i < 32; i++) {
+                       unsigned int devfn = PCI_DEVFN(i, 0);
                        u32 val1, val2;
 
-                       pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
+                       pci_conf1_read(0, bus, devfn, 0, 4, &val1);
                        if (val1 == 0xffffffff)
                                continue;
 
-                       raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2);
+                       raw_pci_ops->read(0, bus, devfn, 0, 4, &val2);
                        if (val1 != val2) {
-                               set_bit(i + 32*k, pci_mmcfg_fallback_slots);
+                               set_bit(i + 32 * bus, pci_mmcfg_fallback_slots);
                                printk(KERN_NOTICE "PCI: No mmconfig possible"
-                                      " on device %02x:%02x\n", k, i);
+                                      " on device %02x:%02x\n", bus, i);
                        }
                }
        }
 }
 
-static __init const char *pci_mmcfg_e7520(void)
+static const char __init *pci_mmcfg_e7520(void)
 {
        u32 win;
        pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
        return "Intel Corporation E7520 Memory Controller Hub";
 }
 
-static __init const char *pci_mmcfg_intel_945(void)
+static const char __init *pci_mmcfg_intel_945(void)
 {
        u32 pciexbar, mask = 0, len = 0;
 
        const char *(*probe)(void);
 };
 
-static __initdata struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] = {
+static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
 };
        pci_mmcfg_config = NULL;
        name = NULL;
 
-       for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++)
-               if ((pci_mmcfg_probes[i].vendor == PCI_ANY_ID ||
-                    pci_mmcfg_probes[i].vendor == vendor) &&
-                   (pci_mmcfg_probes[i].device == PCI_ANY_ID ||
-                    pci_mmcfg_probes[i].device == device))
+       for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
+               if (pci_mmcfg_probes[i].vendor == vendor &&
+                   pci_mmcfg_probes[i].device == device)
                        name = pci_mmcfg_probes[i].probe();
+       }
 
        if (name) {
-               if (pci_mmcfg_config_num)
-                       printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", name);
-               else
-                       printk(KERN_INFO "PCI: Found %s without MMCONFIG support.\n",
-                              name);
+               printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n",
+                      name, pci_mmcfg_config_num ? "with" : "without");
        }
 
        return name != NULL;
 }
 
-static __init void pci_mmcfg_insert_resources(void)
+static void __init pci_mmcfg_insert_resources(void)
 {
 #define PCI_MMCFG_RESOURCE_NAME_LEN 19
        int i;
 
        res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
                        pci_mmcfg_config_num, GFP_KERNEL);
-
        if (!res) {
                printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
                return;
 
        names = (void *)&res[pci_mmcfg_config_num];
        for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
-               num_buses = pci_mmcfg_config[i].end_bus_number -
-                   pci_mmcfg_config[i].start_bus_number + 1;
+               struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i];
+               num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
                res->name = names;
                snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
-                       pci_mmcfg_config[i].pci_segment);
-               res->start = pci_mmcfg_config[i].address;
+                        cfg->pci_segment);
+               res->start = cfg->address;
                res->end = res->start + (num_buses << 20) - 1;
                res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
                insert_resource(&iomem_resource, res);