--- /dev/null
+/*
+ comedi/drivers/pcl818.c
+
+ Author: Michal Dobes <dobes@tesnet.cz>
+
+ hardware driver for Advantech cards:
+ card: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718
+ driver: pcl818l, pcl818h, pcl818hd, pcl818hg, pcl818, pcl718
+*/
+/*
+Driver: pcl818
+Description: Advantech PCL-818 cards, PCL-718
+Author: Michal Dobes <dobes@tesnet.cz>
+Devices: [Advantech] PCL-818L (pcl818l), PCL-818H (pcl818h),
+ PCL-818HD (pcl818hd), PCL-818HG (pcl818hg), PCL-818 (pcl818),
+ PCL-718 (pcl718)
+Status: works
+
+All cards have 16 SE/8 DIFF ADCs, one or two DACs, 16 DI and 16 DO.
+Differences are only at maximal sample speed, range list and FIFO
+support.
+The driver support AI mode 0, 1, 3 other subdevices (AO, DI, DO) support
+only mode 0. If DMA/FIFO/INT are disabled then AI support only mode 0.
+PCL-818HD and PCL-818HG support 1kword FIFO. Driver support this FIFO
+but this code is untested.
+A word or two about DMA. Driver support DMA operations at two ways:
+1) DMA uses two buffers and after one is filled then is generated
+ INT and DMA restart with second buffer. With this mode I'm unable run
+ more that 80Ksamples/secs without data dropouts on K6/233.
+2) DMA uses one buffer and run in autoinit mode and the data are
+ from DMA buffer moved on the fly with 2kHz interrupts from RTC.
+ This mode is used if the interrupt 8 is available for allocation.
+ If not, then first DMA mode is used. With this I can run at
+ full speed one card (100ksamples/secs) or two cards with
+ 60ksamples/secs each (more is problem on account of ISA limitations).
+ To use this mode you must have compiled kernel with disabled
+ "Enhanced Real Time Clock Support".
+ Maybe you can have problems if you use xntpd or similar.
+ If you've data dropouts with DMA mode 2 then:
+ a) disable IDE DMA
+ b) switch text mode console to fb.
+
+ Options for PCL-818L:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA (0=disable, 1, 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0, 5=A/D input -5V.. +5V
+ 1, 10=A/D input -10V..+10V
+ [5] - 0, 5=D/A output 0-5V (internal reference -5V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
+ 2 =D/A output unknow (external reference)
+
+ Options for PCL-818, PCL-818H:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA (0=disable, 1, 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0, 5=D/A output 0-5V (internal reference -5V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
+ 2 =D/A output unknow (external reference)
+
+ Options for PCL-818HD, PCL-818HG:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA/FIFO (-1=use FIFO, 0=disable both FIFO and DMA,
+ 1=use DMA ch 1, 3=use DMA ch 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0, 5=D/A output 0-5V (internal reference -5V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
+ 2 =D/A output unknow (external reference)
+
+ Options for PCL-718:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA (0=disable, 1, 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0=A/D Range is +/-10V
+ 1= +/-5V
+ 2= +/-2.5V
+ 3= +/-1V
+ 4= +/-0.5V
+ 5= user defined bipolar
+ 6= 0-10V
+ 7= 0-5V
+ 8= 0-2V
+ 9= 0-1V
+ 10= user defined unipolar
+ [5] - 0, 5=D/A outputs 0-5V (internal reference -5V)
+ 1, 10=D/A outputs 0-10V (internal reference -10V)
+ 2=D/A outputs unknow (external reference)
+ [6] - 0, 60=max 60kHz A/D sampling
+ 1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed)
+
+*/
+
+#include "../comedidev.h"
+
+#include <linux/ioport.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+#include <asm/dma.h>
+
+#include "8253.h"
+
+// #define PCL818_MODE13_AO 1
+
+// boards constants
+
+#define boardPCL818L 0
+#define boardPCL818H 1
+#define boardPCL818HD 2
+#define boardPCL818HG 3
+#define boardPCL818 4
+#define boardPCL718 5
+
+// IO space len
+#define PCLx1x_RANGE 16
+// IO space len if we use FIFO
+#define PCLx1xFIFO_RANGE 32
+
+// W: clear INT request
+#define PCL818_CLRINT 8
+// R: return status byte
+#define PCL818_STATUS 8
+// R: A/D high byte W: A/D range control
+#define PCL818_RANGE 1
+// R: next mux scan channel W: mux scan channel & range control pointer
+#define PCL818_MUX 2
+// R/W: operation control register
+#define PCL818_CONTROL 9
+// W: counter enable
+#define PCL818_CNTENABLE 10
+
+// R: low byte of A/D W: soft A/D trigger
+#define PCL818_AD_LO 0
+// R: high byte of A/D W: A/D range control
+#define PCL818_AD_HI 1
+// W: D/A low&high byte
+#define PCL818_DA_LO 4
+#define PCL818_DA_HI 5
+// R: low&high byte of DI
+#define PCL818_DI_LO 3
+#define PCL818_DI_HI 11
+// W: low&high byte of DO
+#define PCL818_DO_LO 3
+#define PCL818_DO_HI 11
+// W: PCL718 second D/A
+#define PCL718_DA2_LO 6
+#define PCL718_DA2_HI 7
+// counters
+#define PCL818_CTR0 12
+#define PCL818_CTR1 13
+#define PCL818_CTR2 14
+// W: counter control
+#define PCL818_CTRCTL 15
+
+// W: fifo enable/disable
+#define PCL818_FI_ENABLE 6
+// W: fifo interrupt clear
+#define PCL818_FI_INTCLR 20
+// W: fifo interrupt clear
+#define PCL818_FI_FLUSH 25
+// R: fifo status
+#define PCL818_FI_STATUS 25
+// R: one record from FIFO
+#define PCL818_FI_DATALO 23
+#define PCL818_FI_DATAHI 23
+
+// type of interrupt handler
+#define INT_TYPE_AI1_INT 1
+#define INT_TYPE_AI1_DMA 2
+#define INT_TYPE_AI1_FIFO 3
+#define INT_TYPE_AI3_INT 4
+#define INT_TYPE_AI3_DMA 5
+#define INT_TYPE_AI3_FIFO 6
+#ifdef PCL818_MODE13_AO
+#define INT_TYPE_AO1_INT 7
+#define INT_TYPE_AO3_INT 8
+#endif
+
+#ifdef unused
+// RTC stuff...
+#define INT_TYPE_AI1_DMA_RTC 9
+#define INT_TYPE_AI3_DMA_RTC 10
+
+#define RTC_IRQ 8
+#define RTC_IO_EXTENT 0x10
+#endif
+
+#define MAGIC_DMA_WORD 0x5a5a
+
+static const comedi_lrange range_pcl818h_ai = { 9, {
+ BIP_RANGE(5),
+ BIP_RANGE(2.5),
+ BIP_RANGE(1.25),
+ BIP_RANGE(0.625),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2.5),
+ UNI_RANGE(1.25),
+ BIP_RANGE(10),
+ }
+};
+
+static const comedi_lrange range_pcl818hg_ai = { 10, {
+ BIP_RANGE(5),
+ BIP_RANGE(0.5),
+ BIP_RANGE(0.05),
+ BIP_RANGE(0.005),
+ UNI_RANGE(10),
+ UNI_RANGE(1),
+ UNI_RANGE(0.1),
+ UNI_RANGE(0.01),
+ BIP_RANGE(10),
+ BIP_RANGE(1),
+ BIP_RANGE(0.1),
+ BIP_RANGE(0.01),
+ }
+};
+
+static const comedi_lrange range_pcl818l_l_ai = { 4, {
+ BIP_RANGE(5),
+ BIP_RANGE(2.5),
+ BIP_RANGE(1.25),
+ BIP_RANGE(0.625),
+ }
+};
+
+static const comedi_lrange range_pcl818l_h_ai = { 4, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2.5),
+ BIP_RANGE(1.25),
+ }
+};
+
+static const comedi_lrange range718_bipolar1 = { 1, {BIP_RANGE(1),} };
+static const comedi_lrange range718_bipolar0_5 = { 1, {BIP_RANGE(0.5),} };
+static const comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} };
+static const comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} };
+
+static int pcl818_attach(comedi_device * dev, comedi_devconfig * it);
+static int pcl818_detach(comedi_device * dev);
+
+#ifdef unused
+static int RTC_lock = 0; /* RTC lock */
+static int RTC_timer_lock = 0; /* RTC int lock */
+#endif
+
+typedef struct {
+ const char *name; // driver name
+ int n_ranges; // len of range list
+ int n_aichan_se; // num of A/D chans in single ended mode
+ int n_aichan_diff; // num of A/D chans in diferencial mode
+ unsigned int ns_min; // minimal alllowed delay between samples (in ns)
+ int n_aochan; // num of D/A chans
+ int n_dichan; // num of DI chans
+ int n_dochan; // num of DO chans
+ const comedi_lrange *ai_range_type; // default A/D rangelist
+ const comedi_lrange *ao_range_type; // default D/A rangelist
+ unsigned int io_range; // len of IO space
+ unsigned int IRQbits; // allowed interrupts
+ unsigned int DMAbits; // allowed DMA chans
+ int ai_maxdata; // maxdata for A/D
+ int ao_maxdata; // maxdata for D/A
+ unsigned char fifo; // 1=board has FIFO
+ int is_818;
+} boardtype;
+
+static const boardtype boardtypes[] = {
+ {"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai,
+ &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+ 0x0a, 0xfff, 0xfff, 0, 1},
+ {"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
+ &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+ 0x0a, 0xfff, 0xfff, 0, 1},
+ {"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
+ &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+ 0x0a, 0xfff, 0xfff, 1, 1},
+ {"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai,
+ &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+ 0x0a, 0xfff, 0xfff, 1, 1},
+ {"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai,
+ &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+ 0x0a, 0xfff, 0xfff, 0, 1},
+ {"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5,
+ &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+ 0x0a, 0xfff, 0xfff, 0, 0},
+ /* pcm3718 */
+ {"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai,
+ &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+ 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ },
+};
+
+#define n_boardtypes (sizeof(boardtypes)/sizeof(boardtype))
+
+static comedi_driver driver_pcl818 = {
+ driver_name:"pcl818",
+ module:THIS_MODULE,
+ attach:pcl818_attach,
+ detach:pcl818_detach,
+ board_name:&boardtypes[0].name,
+ num_names:n_boardtypes,
+ offset:sizeof(boardtype),
+};
+
+COMEDI_INITCLEANUP(driver_pcl818);
+
+typedef struct {
+ unsigned int dma; // used DMA, 0=don't use DMA
+ int dma_rtc; // 1=RTC used with DMA, 0=no RTC alloc
+ unsigned int io_range;
+#ifdef unused
+ unsigned long rtc_iobase; // RTC port region
+ unsigned int rtc_iosize;
+ unsigned int rtc_irq;
+ struct timer_list rtc_irq_timer; // timer for RTC sanity check
+ unsigned long rtc_freq; // RTC int freq
+ int rtc_irq_blocked; // 1=we now do AI with DMA&RTC
+#endif
+ unsigned long dmabuf[2]; // pointers to begin of DMA buffers
+ unsigned int dmapages[2]; // len of DMA buffers in PAGE_SIZEs
+ unsigned int hwdmaptr[2]; // hardware address of DMA buffers
+ unsigned int hwdmasize[2]; // len of DMA buffers in Bytes
+ unsigned int dmasamplsize; // size in samples hwdmasize[0]/2
+ unsigned int last_top_dma; // DMA pointer in last RTC int
+ int next_dma_buf; // which DMA buffer will be used next round
+ long dma_runs_to_end; // how many we must permorm DMA transfer to end of record
+ unsigned long last_dma_run; // how many bytes we must transfer on last DMA page
+ unsigned char neverending_ai; // if=1, then we do neverending record (you must use cancel())
+ unsigned int ns_min; // manimal alllowed delay between samples (in us) for actual card
+ int i8253_osc_base; // 1/frequency of on board oscilator in ns
+ int irq_free; // 1=have allocated IRQ
+ int irq_blocked; // 1=IRQ now uses any subdev
+ int irq_was_now_closed; // when IRQ finish, there's stored int818_mode for last interrupt
+ int ai_mode; // who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma
+ comedi_subdevice *last_int_sub; // ptr to subdevice which now finish
+ int ai_act_scan; // how many scans we finished
+ int ai_act_chan; // actual position in actual scan
+ unsigned int act_chanlist[16]; // MUX setting for actual AI operations
+ unsigned int act_chanlist_len; // how long is actual MUX list
+ unsigned int act_chanlist_pos; // actual position in MUX list
+ unsigned int ai_scans; // len of scanlist
+ unsigned int ai_n_chan; // how many channels is measured
+ unsigned int *ai_chanlist; // actaul chanlist
+ unsigned int ai_flags; // flaglist
+ unsigned int ai_data_len; // len of data buffer
+ sampl_t *ai_data; // data buffer
+ unsigned int ai_timer1; // timers
+ unsigned int ai_timer2;
+ comedi_subdevice *sub_ai; // ptr to AI subdevice
+ unsigned char usefifo; // 1=use fifo
+ lsampl_t ao_readback[2];
+} pcl818_private;
+
+static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, // used for gain list programming
+ 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+#define devpriv ((pcl818_private *)dev->private)
+#define this_board ((const boardtype *)dev->board_ptr)
+
+/*
+==============================================================================
+*/
+static void setup_channel_list(comedi_device * dev, comedi_subdevice * s,
+ unsigned int *chanlist, unsigned int n_chan, unsigned int seglen);
+static int check_channel_list(comedi_device * dev, comedi_subdevice * s,
+ unsigned int *chanlist, unsigned int n_chan);
+
+static int pcl818_ai_cancel(comedi_device * dev, comedi_subdevice * s);
+static void start_pacer(comedi_device * dev, int mode, unsigned int divisor1,
+ unsigned int divisor2);
+
+#ifdef unused
+static int set_rtc_irq_bit(unsigned char bit);
+static void rtc_dropped_irq(unsigned long data);
+static int rtc_setfreq_irq(int freq);
+#endif
+
+/*
+==============================================================================
+ ANALOG INPUT MODE0, 818 cards, slow version
+*/
+static int pcl818_ai_insn_read(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ int n;
+ int timeout;
+
+ /* software trigger, DMA and INT off */
+ outb(0, dev->iobase + PCL818_CONTROL);
+
+ /* select channel */
+ outb(muxonechan[CR_CHAN(insn->chanspec)], dev->iobase + PCL818_MUX);
+
+ /* select gain */
+ outb(CR_RANGE(insn->chanspec), dev->iobase + PCL818_RANGE);
+
+ for (n = 0; n < insn->n; n++) {
+
+ /* clear INT (conversion end) flag */
+ outb(0, dev->iobase + PCL818_CLRINT);
+
+ /* start conversion */
+ outb(0, dev->iobase + PCL818_AD_LO);
+
+ timeout = 100;
+ while (timeout--) {
+ if (inb(dev->iobase + PCL818_STATUS) & 0x10)
+ goto conv_finish;
+ comedi_udelay(1);
+ }
+ comedi_error(dev, "A/D insn timeout");
+ /* clear INT (conversion end) flag */
+ outb(0, dev->iobase + PCL818_CLRINT);
+ return -EIO;
+
+ conv_finish:
+ data[n] = ((inb(dev->iobase + PCL818_AD_HI) << 4) |
+ (inb(dev->iobase + PCL818_AD_LO) >> 4));
+ }
+
+ return n;
+}
+
+/*
+==============================================================================
+ ANALOG OUTPUT MODE0, 818 cards
+ only one sample per call is supported
+*/
+static int pcl818_ao_insn_read(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ int n;
+ int chan = CR_CHAN(insn->chanspec);
+
+ for (n = 0; n < insn->n; n++) {
+ data[n] = devpriv->ao_readback[chan];
+ }
+
+ return n;
+}
+
+static int pcl818_ao_insn_write(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ int n;
+ int chan = CR_CHAN(insn->chanspec);
+
+ for (n = 0; n < insn->n; n++) {
+ devpriv->ao_readback[chan] = data[n];
+ outb((data[n] & 0x000f) << 4, dev->iobase +
+ (chan) ? PCL718_DA2_LO : PCL818_DA_LO);
+ outb((data[n] & 0x0ff0) >> 4, dev->iobase +
+ (chan) ? PCL718_DA2_HI : PCL818_DA_HI);
+ }
+
+ return n;
+}
+
+/*
+==============================================================================
+ DIGITAL INPUT MODE0, 818 cards
+
+ only one sample per call is supported
+*/
+static int pcl818_di_insn_bits(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ if (insn->n != 2)
+ return -EINVAL;
+
+ data[1] = inb(dev->iobase + PCL818_DI_LO) |
+ (inb(dev->iobase + PCL818_DI_HI) << 8);
+
+ return 2;
+}
+
+/*
+==============================================================================
+ DIGITAL OUTPUT MODE0, 818 cards
+
+ only one sample per call is supported
+*/
+static int pcl818_do_insn_bits(comedi_device * dev, comedi_subdevice * s,
+ comedi_insn * insn, lsampl_t * data)
+{
+ if (insn->n != 2)
+ return -EINVAL;
+
+ s->state &= ~data[0];
+ s->state |= (data[0] & data[1]);
+
+ outb(s->state & 0xff, dev->iobase + PCL818_DO_LO);
+ outb((s->state >> 8), dev->iobase + PCL818_DO_HI);
+
+ data[1] = s->state;
+
+ return 2;
+}
+
+/*
+==============================================================================
+ analog input interrupt mode 1 & 3, 818 cards
+ one sample per interrupt version
+*/
+static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
+{
+ comedi_device *dev = d;
+ comedi_subdevice *s = dev->subdevices + 0;
+ int low;
+ int timeout = 50; /* wait max 50us */
+
+ while (timeout--) {
+ if (inb(dev->iobase + PCL818_STATUS) & 0x10)
+ goto conv_finish;
+ comedi_udelay(1);
+ }
+ outb(0, dev->iobase + PCL818_STATUS); /* clear INT request */
+ comedi_error(dev, "A/D mode1/3 IRQ without DRDY!");
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+
+ conv_finish:
+ low = inb(dev->iobase + PCL818_AD_LO);
+ comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4))); // get one sample
+ outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
+
+ if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout!
+ rt_printk
+ ("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
+ (low & 0xf),
+ devpriv->act_chanlist[devpriv->act_chanlist_pos]);
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+ if (s->async->cur_chan == 0) {
+ // rt_printk("E");
+ devpriv->ai_act_scan--;
+ }
+
+ if (!devpriv->neverending_ai) {
+ if (devpriv->ai_act_scan == 0) { /* all data sampled */
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA;
+ }
+ }
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+}
+
+/*
+==============================================================================
+ analog input dma mode 1 & 3, 818 cards
+*/
+static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
+{
+ comedi_device *dev = d;
+ comedi_subdevice *s = dev->subdevices + 0;
+ int i, len, bufptr;
+ unsigned long flags;
+ sampl_t *ptr;
+
+ disable_dma(devpriv->dma);
+ devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
+ if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) { // switch dma bufs
+ set_dma_mode(devpriv->dma, DMA_MODE_READ);
+ flags = claim_dma_lock();
+ set_dma_addr(devpriv->dma,
+ devpriv->hwdmaptr[devpriv->next_dma_buf]);
+ if (devpriv->dma_runs_to_end || devpriv->neverending_ai) {
+ set_dma_count(devpriv->dma,
+ devpriv->hwdmasize[devpriv->next_dma_buf]);
+ } else {
+ set_dma_count(devpriv->dma, devpriv->last_dma_run);
+ }
+ release_dma_lock(flags);
+ enable_dma(devpriv->dma);
+ }
+ rt_printk("comedi: A/D mode1/3 IRQ \n");
+
+ devpriv->dma_runs_to_end--;
+ outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
+ ptr = (sampl_t *) devpriv->dmabuf[1 - devpriv->next_dma_buf];
+
+ len = devpriv->hwdmasize[0] >> 1;
+ bufptr = 0;
+
+ for (i = 0; i < len; i++) {
+ if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout!
+ rt_printk
+ ("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n",
+ (ptr[bufptr] & 0xf),
+ devpriv->act_chanlist[devpriv->
+ act_chanlist_pos],
+ devpriv->act_chanlist_pos);
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+
+ comedi_buf_put(s->async, ptr[bufptr++] >> 4); // get one sample
+
+ devpriv->act_chanlist_pos++;
+ if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
+ devpriv->ai_act_scan--;
+ devpriv->act_chanlist_pos = 0;
+ }
+
+ if (!devpriv->neverending_ai)
+ if (devpriv->ai_act_scan == 0) { /* all data sampled */
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA;
+ comedi_event(dev, s);
+ // printk("done int ai13 dma\n");
+ return IRQ_HANDLED;
+ }
+ }
+
+ if (len > 0)
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+}
+
+#ifdef unused
+/*
+==============================================================================
+ analog input dma mode 1 & 3 over RTC, 818 cards
+*/
+static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
+{
+ comedi_device *dev = d;
+ comedi_subdevice *s = dev->subdevices + 0;
+ unsigned long tmp;
+ unsigned int top1, top2, i, bufptr;
+ long ofs_dats;
+ sampl_t *dmabuf = (sampl_t *) devpriv->dmabuf[0];
+
+ //outb(2,0x378);
+ switch (devpriv->ai_mode) {
+ case INT_TYPE_AI1_DMA_RTC:
+ case INT_TYPE_AI3_DMA_RTC:
+ tmp = (CMOS_READ(RTC_INTR_FLAGS) & 0xF0);
+ mod_timer(&devpriv->rtc_irq_timer,
+ jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100);
+
+ for (i = 0; i < 10; i++) {
+ top1 = get_dma_residue(devpriv->dma);
+ top2 = get_dma_residue(devpriv->dma);
+ if (top1 == top2)
+ break;
+ }
+
+ if (top1 != top2)
+ return IRQ_HANDLED;
+ top1 = devpriv->hwdmasize[0] - top1; // where is now DMA in buffer
+ top1 >>= 1;
+ ofs_dats = top1 - devpriv->last_top_dma; // new samples from last call
+ if (ofs_dats < 0)
+ ofs_dats = (devpriv->dmasamplsize) + ofs_dats;
+ if (!ofs_dats)
+ return IRQ_HANDLED; // exit=no new samples from last call
+ // obsluz data
+ i = devpriv->last_top_dma - 1;
+ i &= (devpriv->dmasamplsize - 1);
+
+ if (dmabuf[i] != MAGIC_DMA_WORD) { // DMA overflow!
+ comedi_error(dev, "A/D mode1/3 DMA buffer overflow!");
+ //rt_printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize);
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+ //rt_printk("r %ld ",ofs_dats);
+
+ bufptr = devpriv->last_top_dma;
+
+ for (i = 0; i < ofs_dats; i++) {
+ if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout!
+ rt_printk
+ ("comedi: A/D mode1/3 DMA - channel dropout %d!=%d !\n",
+ (dmabuf[bufptr] & 0xf),
+ devpriv->act_chanlist[devpriv->
+ act_chanlist_pos]);
+ pcl818_ai_cancel(dev, s);
+ s->async->events |=
+ COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+
+ comedi_buf_put(s->async, dmabuf[bufptr++] >> 4); // get one sample
+ bufptr &= (devpriv->dmasamplsize - 1);
+
+ if (s->async->cur_chan == 0) {
+ devpriv->ai_act_scan--;
+ }
+
+ if (!devpriv->neverending_ai)
+ if (devpriv->ai_act_scan == 0) { /* all data sampled */
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA;
+ comedi_event(dev, s);
+ //printk("done int ai13 dma\n");
+ return IRQ_HANDLED;
+ }
+ }
+
+ devpriv->last_top_dma = bufptr;
+ bufptr--;
+ bufptr &= (devpriv->dmasamplsize - 1);
+ dmabuf[bufptr] = MAGIC_DMA_WORD;
+ comedi_event(dev, s);
+ //outb(0,0x378);
+ return IRQ_HANDLED;
+ }
+
+ //outb(0,0x378);
+ return IRQ_HANDLED;
+}
+#endif
+
+/*
+==============================================================================
+ analog input interrupt mode 1 & 3, 818HD/HG cards
+*/
+static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
+{
+ comedi_device *dev = d;
+ comedi_subdevice *s = dev->subdevices + 0;
+ int i, len, lo;
+
+ outb(0, dev->iobase + PCL818_FI_INTCLR); // clear fifo int request
+
+ lo = inb(dev->iobase + PCL818_FI_STATUS);
+
+ if (lo & 4) {
+ comedi_error(dev, "A/D mode1/3 FIFO overflow!");
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+
+ if (lo & 1) {
+ comedi_error(dev, "A/D mode1/3 FIFO interrupt without data!");
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+
+ if (lo & 2) {
+ len = 512;
+ } else {
+ len = 0;
+ }
+
+ for (i = 0; i < len; i++) {
+ lo = inb(dev->iobase + PCL818_FI_DATALO);
+ if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout!
+ rt_printk
+ ("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
+ (lo & 0xf),
+ devpriv->act_chanlist[devpriv->
+ act_chanlist_pos]);
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+
+ comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4)); // get one sample
+
+ if (s->async->cur_chan == 0) {
+ devpriv->ai_act_scan--;
+ }
+
+ if (!devpriv->neverending_ai)
+ if (devpriv->ai_act_scan == 0) { /* all data sampled */
+ pcl818_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_EOA;
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+ }
+ }
+
+ if (len > 0)
+ comedi_event(dev, s);
+ return IRQ_HANDLED;
+}
+
+/*
+==============================================================================
+ INT procedure
+*/
+static irqreturn_t interrupt_pcl818(int irq, void *d PT_REGS_ARG)
+{
+ comedi_device *dev = d;
+
+ if (!dev->attached) {
+ comedi_error(dev, "premature interrupt");
+ return IRQ_HANDLED;
+ }
+ //rt_printk("I\n");
+
+ switch (devpriv->ai_mode) {
+ case INT_TYPE_AI1_DMA:
+ case INT_TYPE_AI3_DMA:
+ return interrupt_pcl818_ai_mode13_dma(irq, d);
+ case INT_TYPE_AI1_INT:
+ case INT_TYPE_AI3_INT:
+ return interrupt_pcl818_ai_mode13_int(irq, d);
+ case INT_TYPE_AI1_FIFO:
+ case INT_TYPE_AI3_FIFO:
+ return interrupt_pcl818_ai_mode13_fifo(irq, d);
+#ifdef PCL818_MODE13_AO
+ case INT_TYPE_AO1_INT:
+ case INT_TYPE_AO3_INT:
+ return interrupt_pcl818_ao_mode13_int(irq, d);
+#endif
+ default:
+ break;
+ }
+
+ outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
+
+ if ((!dev->irq) || (!devpriv->irq_free) || (!devpriv->irq_blocked)
+ || (!devpriv->ai_mode)) {
+ if (devpriv->irq_was_now_closed) {
+ if (devpriv->neverending_ai &&
+ (devpriv->ai_mode == INT_TYPE_AI1_DMA
+ || devpriv->ai_mode ==
+ INT_TYPE_AI3_DMA)) {
+ /* we had neverending ai but ai_cancel() has been called
+ the cleanup from ai_cancel() has been delayed until know
+ because the card doesn't seem to like being reprogrammed
+ while a DMA transfer is in progress
+ */
+ comedi_subdevice *s = dev->subdevices + 0;
+ devpriv->ai_mode = devpriv->irq_was_now_closed;
+ devpriv->irq_was_now_closed = 0;
+ devpriv->neverending_ai = 0;
+ pcl818_ai_cancel(dev, s);
+ }
+ devpriv->irq_was_now_closed = 0;
+ return IRQ_HANDLED;
+ }
+ comedi_error(dev, "bad IRQ!");
+ return IRQ_NONE;
+ }
+
+ comedi_error(dev, "IRQ from unknow source!");
+ return IRQ_NONE;
+}
+
+/*
+==============================================================================
+ ANALOG INPUT MODE 1 or 3 DMA , 818 cards
+*/
+static void pcl818_ai_mode13dma_int(int mode, comedi_device * dev,
+ comedi_subdevice * s)
+{
+ unsigned int flags;
+ unsigned int bytes;
+
+ rt_printk("mode13dma_int, mode: %d\n", mode);
+ disable_dma(devpriv->dma); // disable dma
+ bytes = devpriv->hwdmasize[0];
+ if (!devpriv->neverending_ai) {
+ bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(sampl_t); // how many
+ devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; // how many DMA pages we must fiil
+ devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; //on last dma transfer must be moved
+ devpriv->dma_runs_to_end--;
+ if (devpriv->dma_runs_to_end >= 0)
+ bytes = devpriv->hwdmasize[0];
+ }
+
+ devpriv->next_dma_buf = 0;
+ set_dma_mode(devpriv->dma, DMA_MODE_READ);
+ flags = claim_dma_lock();
+ clear_dma_ff(devpriv->dma);
+ set_dma_addr(devpriv->dma, devpriv->hwdmaptr[0]);
+ set_dma_count(devpriv->dma, bytes);
+ release_dma_lock(flags);
+ enable_dma(devpriv->dma);
+
+ if (mode == 1) {
+ devpriv->ai_mode = INT_TYPE_AI1_DMA;
+ outb(0x87 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ+DMA */
+ } else {
+ devpriv->ai_mode = INT_TYPE_AI3_DMA;
+ outb(0x86 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ+DMA */
+ };
+}
+
+#ifdef unused
+/*
+==============================================================================
+ ANALOG INPUT MODE 1 or 3 DMA rtc, 818 cards
+*/
+static void pcl818_ai_mode13dma_rtc(int mode, comedi_device * dev,
+ comedi_subdevice * s)
+{
+ unsigned int flags;
+ sampl_t *pole;
+
+ set_dma_mode(devpriv->dma, DMA_MODE_READ | DMA_AUTOINIT);
+ flags = claim_dma_lock();
+ clear_dma_ff(devpriv->dma);
+ set_dma_addr(devpriv->dma, devpriv->hwdmaptr[0]);
+ set_dma_count(devpriv->dma, devpriv->hwdmasize[0]);
+ release_dma_lock(flags);
+ enable_dma(devpriv->dma);
+ devpriv->last_top_dma = 0; //devpriv->hwdmasize[0];
+ pole = (sampl_t *) devpriv->dmabuf[0];
+ devpriv->dmasamplsize = devpriv->hwdmasize[0] / 2;
+ pole[devpriv->dmasamplsize - 1] = MAGIC_DMA_WORD;
+#ifdef unused
+ devpriv->rtc_freq = rtc_setfreq_irq(2048);
+ devpriv->rtc_irq_timer.expires =
+ jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100;
+ devpriv->rtc_irq_timer.data = (unsigned long)dev;
+ devpriv->rtc_irq_timer.function = rtc_dropped_irq;
+
+ add_timer(&devpriv->rtc_irq_timer);
+#endif
+
+ if (mode == 1) {
+ devpriv->int818_mode = INT_TYPE_AI1_DMA_RTC;
+ outb(0x07 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+DMA */
+ } else {
+ devpriv->int818_mode = INT_TYPE_AI3_DMA_RTC;
+ outb(0x06 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+DMA */
+ };
+}
+#endif
+
+/*
+==============================================================================
+ ANALOG INPUT MODE 1 or 3, 818 cards
+*/
+static int pcl818_ai_cmd_mode(int mode, comedi_device * dev,
+ comedi_subdevice * s)
+{
+ comedi_cmd *cmd = &s->async->cmd;
+ int divisor1, divisor2;
+ unsigned int seglen;
+
+ rt_printk("pcl818_ai_cmd_mode()\n");
+ if ((!dev->irq) && (!devpriv->dma_rtc)) {
+ comedi_error(dev, "IRQ not defined!");
+ return -EINVAL;
+ }
+
+ if (devpriv->irq_blocked)
+ return -EBUSY;
+
+ start_pacer(dev, -1, 0, 0); // stop pacer
+
+ seglen = check_channel_list(dev, s, devpriv->ai_chanlist,
+ devpriv->ai_n_chan);
+ if (seglen < 1)
+ return -EINVAL;
+ setup_channel_list(dev, s, devpriv->ai_chanlist,
+ devpriv->ai_n_chan, seglen);
+
+ comedi_udelay(1);
+
+ devpriv->ai_act_scan = devpriv->ai_scans;
+ devpriv->ai_act_chan = 0;
+ devpriv->irq_blocked = 1;
+ devpriv->irq_was_now_closed = 0;
+ devpriv->neverending_ai = 0;
+ devpriv->act_chanlist_pos = 0;
+ devpriv->dma_runs_to_end = 0;
+
+ if ((devpriv->ai_scans == 0) || (devpriv->ai_scans == -1))
+ devpriv->neverending_ai = 1; //well, user want neverending
+
+ if (mode == 1) {
+ i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
+ &divisor2, &cmd->convert_arg, TRIG_ROUND_NEAREST);
+ if (divisor1 == 1) { /* PCL718/818 crash if any divisor is set to 1 */
+ divisor1 = 2;
+ divisor2 /= 2;
+ }
+ if (divisor2 == 1) {
+ divisor2 = 2;
+ divisor1 /= 2;
+ }
+ }
+
+ outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */
+
+ switch (devpriv->dma) {
+ case 1: // DMA
+ case 3:
+ if (devpriv->dma_rtc == 0) {
+ pcl818_ai_mode13dma_int(mode, dev, s);
+ }
+#ifdef unused
+ else {
+ pcl818_ai_mode13dma_rtc(mode, dev, s);
+ }
+#else
+ else {
+ return -EINVAL;
+ }
+#endif
+ break;
+ case 0: // IRQ
+ // rt_printk("IRQ\n");
+ if (mode == 1) {
+ devpriv->ai_mode = INT_TYPE_AI1_INT;
+ outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ */
+ } else {
+ devpriv->ai_mode = INT_TYPE_AI3_INT;
+ outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ */
+ };
+ break;
+ case -1: // FIFO
+ outb(1, dev->iobase + PCL818_FI_ENABLE); // enable FIFO
+ if (mode == 1) {
+ devpriv->ai_mode = INT_TYPE_AI1_FIFO;
+ outb(0x03, dev->iobase + PCL818_CONTROL); /* Pacer */
+ } else {
+ devpriv->ai_mode = INT_TYPE_AI3_FIFO;
+ outb(0x02, dev->iobase + PCL818_CONTROL);
+ }; /* Ext trig */
+ break;
+ }
+
+ start_pacer(dev, mode, divisor1, divisor2);
+
+#ifdef unused
+ switch (devpriv->ai_mode) {
+ case INT_TYPE_AI1_DMA_RTC:
+ case INT_TYPE_AI3_DMA_RTC:
+ set_rtc_irq_bit(1); /* start RTC */
+ break;
+ }
+#endif
+ rt_printk("pcl818_ai_cmd_mode() end\n");
+ return 0;
+}
+
+#ifdef unused
+/*
+==============================================================================
+ ANALOG OUTPUT MODE 1 or 3, 818 cards
+*/
+#ifdef PCL818_MODE13_AO
+static int pcl818_ao_mode13(int mode, comedi_device * dev, comedi_subdevice * s,
+ comedi_trig * it)
+{
+ int divisor1, divisor2;
+
+ if (!dev->irq) {
+ comedi_error(dev, "IRQ not defined!");
+ return -EINVAL;
+ }
+
+ if (devpriv->irq_blocked)
+ return -EBUSY;
+
+ start_pacer(dev, -1, 0, 0); // stop pacer
+
+ devpriv->int13_act_scan = it->n;
+ devpriv->int13_act_chan = 0;
+ devpriv->irq_blocked = 1;
+ devpriv->irq_was_now_closed = 0;
+ devpriv->neverending_ai = 0;
+ devpriv->act_chanlist_pos = 0;
+
+ if (mode == 1) {
+ i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
+ &divisor2, &it->trigvar, TRIG_ROUND_NEAREST);
+ if (divisor1 == 1) { /* PCL818 crash if any divisor is set to 1 */
+ divisor1 = 2;
+ divisor2 /= 2;
+ }
+ if (divisor2 == 1) {
+ divisor2 = 2;
+ divisor1 /= 2;
+ }
+ }
+
+ outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */
+ if (mode == 1) {
+ devpriv->int818_mode = INT_TYPE_AO1_INT;
+ outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ */
+ } else {
+ devpriv->int818_mode = INT_TYPE_AO3_INT;
+ outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ */
+ };
+
+ start_pacer(dev, mode, divisor1, divisor2);
+
+ return 0;
+}
+
+/*
+==============================================================================
+ ANALOG OUTPUT MODE 1, 818 cards
+*/
+static int pcl818_ao_mode1(comedi_device * dev, comedi_subdevice * s,
+ comedi_trig * it)
+{
+ return pcl818_ao_mode13(1, dev, s, it);
+}
+
+/*
+==============================================================================
+ ANALOG OUTPUT MODE 3, 818 cards
+*/
+static int pcl818_ao_mode3(comedi_device * dev, comedi_subdevice * s,
+ comedi_trig * it)
+{
+ return pcl818_ao_mode13(3, dev, s, it);
+}
+#endif
+#endif
+
+/*
+==============================================================================
+ Start/stop pacer onboard pacer
+*/
+static void start_pacer(comedi_device * dev, int mode, unsigned int divisor1,
+ unsigned int divisor2)
+{
+ outb(0xb4, dev->iobase + PCL818_CTRCTL);
+ outb(0x74, dev->iobase + PCL818_CTRCTL);
+ comedi_udelay(1);
+
+ if (mode == 1) {
+ outb(divisor2 & 0xff, dev->iobase + PCL818_CTR2);
+ outb((divisor2 >> 8) & 0xff, dev->iobase + PCL818_CTR2);
+ outb(divisor1 & 0xff, dev->iobase + PCL818_CTR1);
+ outb((divisor1 >> 8) & 0xff, dev->iobase + PCL818_CTR1);
+ }
+}
+
+/*
+==============================================================================
+ Check if channel list from user is builded correctly
+ If it's ok, then program scan/gain logic
+*/
+static int check_channel_list(comedi_device * dev, comedi_subdevice * s,
+ unsigned int *chanlist, unsigned int n_chan)
+{
+ unsigned int chansegment[16];
+ unsigned int i, nowmustbechan, seglen, segpos;
+
+ /* correct channel and range number check itself comedi/range.c */
+ if (n_chan < 1) {
+ comedi_error(dev, "range/channel list is empty!");
+ return 0;
+ }
+
+ if (n_chan > 1) {
+ // first channel is everytime ok
+ chansegment[0] = chanlist[0];
+ // build part of chanlist
+ for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
+ // rt_printk("%d. %d %d\n",i,CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));
+ // we detect loop, this must by finish
+ if (chanlist[0] == chanlist[i])
+ break;
+ nowmustbechan =
+ (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
+ if (nowmustbechan != CR_CHAN(chanlist[i])) { // channel list isn't continous :-(
+ rt_printk
+ ("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
+ dev->minor, i, CR_CHAN(chanlist[i]),
+ nowmustbechan, CR_CHAN(chanlist[0]));
+ return 0;
+ }
+ // well, this is next correct channel in list
+ chansegment[i] = chanlist[i];
+ }
+
+ // check whole chanlist
+ for (i = 0, segpos = 0; i < n_chan; i++) {
+ //rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));
+ if (chanlist[i] != chansegment[i % seglen]) {
+ rt_printk
+ ("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
+ dev->minor, i, CR_CHAN(chansegment[i]),
+ CR_RANGE(chansegment[i]),
+ CR_AREF(chansegment[i]),
+ CR_CHAN(chanlist[i % seglen]),
+ CR_RANGE(chanlist[i % seglen]),
+ CR_AREF(chansegment[i % seglen]));
+ return 0; // chan/gain list is strange
+ }
+ }
+ } else {
+ seglen = 1;
+ }
+ rt_printk("check_channel_list: seglen %d\n", seglen);
+ return seglen;
+}
+
+static void setup_channel_list(comedi_device * dev, comedi_subdevice * s,
+ unsigned int *chanlist, unsigned int n_chan, unsigned int seglen)
+{
+ int i;
+
+ devpriv->act_chanlist_len = seglen;
+ devpriv->act_chanlist_pos = 0;
+
+ for (i = 0; i < seglen; i++) { // store range list to card
+ devpriv->act_chanlist[i] = CR_CHAN(chanlist[i]);
+ outb(muxonechan[CR_CHAN(chanlist[i])], dev->iobase + PCL818_MUX); /* select channel */
+ outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE); /* select gain */
+ }
+
+ comedi_udelay(1);
+
+ /* select channel interval to scan */
+ outb(devpriv->act_chanlist[0] | (devpriv->act_chanlist[seglen -
+ 1] << 4), dev->iobase + PCL818_MUX);
+}
+
+/*
+==============================================================================
+ Check if board is switched to SE (1) or DIFF(0) mode
+*/
+static int check_single_ended(unsigned int port)
+{
+ if (inb(port + PCL818_STATUS) & 0x20) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/*
+==============================================================================
+*/
+static int ai_cmdtest(comedi_device * dev, comedi_subdevice * s,
+ comedi_cmd * cmd)
+{
+ int err = 0;
+ int tmp, divisor1, divisor2;
+
+ /* step 1: make sure trigger sources are trivially valid */
+
+ tmp = cmd->start_src;
+ cmd->start_src &= TRIG_NOW;
+ if (!cmd->start_src || tmp != cmd->start_src)
+ err++;
+
+ tmp = cmd->scan_begin_src;
+ cmd->scan_begin_src &= TRIG_FOLLOW;
+ if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
+ err++;
+
+ tmp = cmd->convert_src;
+ cmd->convert_src &= TRIG_TIMER | TRIG_EXT;
+ if (!cmd->convert_src || tmp != cmd->convert_src)
+ err++;
+
+ tmp = cmd->scan_end_src;
+ cmd->scan_end_src &= TRIG_COUNT;
+ if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
+ err++;
+
+ tmp = cmd->stop_src;
+ cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
+ if (!cmd->stop_src || tmp != cmd->stop_src)
+ err++;
+
+ if (err) {
+ return 1;
+ }
+
+ /* step 2: make sure trigger sources are unique and mutually compatible */
+
+ if (cmd->start_src != TRIG_NOW) {
+ cmd->start_src = TRIG_NOW;
+ err++;
+ }
+ if (cmd->scan_begin_src != TRIG_FOLLOW) {
+ cmd->scan_begin_src = TRIG_FOLLOW;
+ err++;
+ }
+ if (cmd->convert_src != TRIG_TIMER && cmd->convert_src != TRIG_EXT)
+ err++;
+
+ if (cmd->scan_end_src != TRIG_COUNT) {
+ cmd->scan_end_src = TRIG_COUNT;
+ err++;
+ }
+
+ if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
+ err++;
+
+ if (err) {
+ return 2;
+ }
+
+ /* step 3: make sure arguments are trivially compatible */
+
+ if (cmd->start_arg != 0) {
+ cmd->start_arg = 0;
+ err++;
+ }
+
+ if (cmd->scan_begin_arg != 0) {
+ cmd->scan_begin_arg = 0;
+ err++;
+ }
+
+ if (cmd->convert_src == TRIG_TIMER) {
+ if (cmd->convert_arg < this_board->ns_min) {
+ cmd->convert_arg = this_board->ns_min;
+ err++;
+ }
+ } else { /* TRIG_EXT */
+ if (cmd->convert_arg != 0) {
+ cmd->convert_arg = 0;
+ err++;
+ }
+ }
+
+ if (!cmd->chanlist_len) {
+ cmd->chanlist_len = 1;
+ err++;
+ }
+ if (cmd->chanlist_len > s->n_chan) {
+ cmd->chanlist_len = s->n_chan;
+ err++;
+ }
+ if (cmd->scan_end_arg != cmd->chanlist_len) {
+ cmd->scan_end_arg = cmd->chanlist_len;
+ err++;
+ }
+ if (cmd->stop_src == TRIG_COUNT) {
+ if (!cmd->stop_arg) {
+ cmd->stop_arg = 1;
+ err++;
+ }
+ } else { /* TRIG_NONE */
+ if (cmd->stop_arg != 0) {
+ cmd->stop_arg = 0;
+ err++;
+ }
+ }
+
+ if (err) {
+ return 3;
+ }
+
+ /* step 4: fix up any arguments */
+
+ if (cmd->convert_src == TRIG_TIMER) {
+ tmp = cmd->convert_arg;
+ i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
+ &divisor2, &cmd->convert_arg,
+ cmd->flags & TRIG_ROUND_MASK);
+ if (cmd->convert_arg < this_board->ns_min)
+ cmd->convert_arg = this_board->ns_min;
+ if (tmp != cmd->convert_arg)
+ err++;
+ }
+
+ if (err) {
+ return 4;
+ }
+
+ /* step 5: complain about special chanlist considerations */
+
+ if (cmd->chanlist) {
+ if (!check_channel_list(dev, s, cmd->chanlist,
+ cmd->chanlist_len))
+ return 5; // incorrect channels list
+ }
+
+ return 0;
+}
+
+/*
+==============================================================================
+*/
+static int ai_cmd(comedi_device * dev, comedi_subdevice * s)
+{
+ comedi_cmd *cmd = &s->async->cmd;
+ int retval;
+
+ rt_printk("pcl818_ai_cmd()\n");
+ devpriv->ai_n_chan = cmd->chanlist_len;
+ devpriv->ai_chanlist = cmd->chanlist;
+ devpriv->ai_flags = cmd->flags;
+ devpriv->ai_data_len = s->async->prealloc_bufsz;
+ devpriv->ai_data = s->async->prealloc_buf;
+ devpriv->ai_timer1 = 0;
+ devpriv->ai_timer2 = 0;
+
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ai_scans = cmd->stop_arg;
+ } else {
+ devpriv->ai_scans = 0;
+ }
+
+ if (cmd->scan_begin_src == TRIG_FOLLOW) { // mode 1, 3
+ if (cmd->convert_src == TRIG_TIMER) { // mode 1
+ devpriv->ai_timer1 = cmd->convert_arg;
+ retval = pcl818_ai_cmd_mode(1, dev, s);
+ rt_printk("pcl818_ai_cmd() end\n");
+ return retval;
+ }
+ if (cmd->convert_src == TRIG_EXT) { // mode 3
+ return pcl818_ai_cmd_mode(3, dev, s);
+ }
+ }
+
+ return -1;
+}
+
+/*
+==============================================================================
+ cancel any mode 1-4 AI
+*/
+static int pcl818_ai_cancel(comedi_device * dev, comedi_subdevice * s)
+{
+ if (devpriv->irq_blocked > 0) {
+ rt_printk("pcl818_ai_cancel()\n");
+ devpriv->irq_was_now_closed = devpriv->ai_mode;
+ devpriv->ai_mode = 0;
+
+ switch (devpriv->irq_was_now_closed) {
+#ifdef unused
+ case INT_TYPE_AI1_DMA_RTC:
+ case INT_TYPE_AI3_DMA_RTC:
+ set_rtc_irq_bit(0); // stop RTC
+ del_timer(&devpriv->rtc_irq_timer);
+#endif
+ case INT_TYPE_AI1_DMA:
+ case INT_TYPE_AI3_DMA:
+ if (devpriv->neverending_ai) {
+ /* wait for running dma transfer to end, do cleanup in interrupt */
+ goto end;
+ }
+ disable_dma(devpriv->dma);
+ case INT_TYPE_AI1_INT:
+ case INT_TYPE_AI3_INT:
+ case INT_TYPE_AI1_FIFO:
+ case INT_TYPE_AI3_FIFO:
+#ifdef PCL818_MODE13_AO
+ case INT_TYPE_AO1_INT:
+ case INT_TYPE_AO3_INT:
+#endif
+ outb(inb(dev->iobase + PCL818_CONTROL) & 0x73, dev->iobase + PCL818_CONTROL); /* Stop A/D */
+ comedi_udelay(1);
+ start_pacer(dev, -1, 0, 0);
+ outb(0, dev->iobase + PCL818_AD_LO);
+ inb(dev->iobase + PCL818_AD_LO);
+ inb(dev->iobase + PCL818_AD_HI);
+ outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
+ outb(0, dev->iobase + PCL818_CONTROL); /* Stop A/D */
+ if (devpriv->usefifo) { // FIFO shutdown
+ outb(0, dev->iobase + PCL818_FI_INTCLR);
+ outb(0, dev->iobase + PCL818_FI_FLUSH);
+ outb(0, dev->iobase + PCL818_FI_ENABLE);
+ }
+ devpriv->irq_blocked = 0;
+ devpriv->last_int_sub = s;
+ devpriv->neverending_ai = 0;
+ break;
+ }
+ }
+
+ end:
+ rt_printk("pcl818_ai_cancel() end\n");
+ return 0;
+}
+
+/*
+==============================================================================
+ chech for PCL818
+*/
+static int pcl818_check(unsigned long iobase)
+{
+ outb(0x00, iobase + PCL818_MUX);
+ comedi_udelay(1);
+ if (inb(iobase + PCL818_MUX) != 0x00)
+ return 1; //there isn't card
+ outb(0x55, iobase + PCL818_MUX);
+ comedi_udelay(1);
+ if (inb(iobase + PCL818_MUX) != 0x55)
+ return 1; //there isn't card
+ outb(0x00, iobase + PCL818_MUX);
+ comedi_udelay(1);
+ outb(0x18, iobase + PCL818_CONTROL);
+ comedi_udelay(1);
+ if (inb(iobase + PCL818_CONTROL) != 0x18)
+ return 1; //there isn't card
+ return 0; // ok, card exist
+}
+
+/*
+==============================================================================
+ reset whole PCL-818 cards
+*/
+static void pcl818_reset(comedi_device * dev)
+{
+ if (devpriv->usefifo) { // FIFO shutdown
+ outb(0, dev->iobase + PCL818_FI_INTCLR);
+ outb(0, dev->iobase + PCL818_FI_FLUSH);
+ outb(0, dev->iobase + PCL818_FI_ENABLE);
+ }
+ outb(0, dev->iobase + PCL818_DA_LO); // DAC=0V
+ outb(0, dev->iobase + PCL818_DA_HI);
+ comedi_udelay(1);
+ outb(0, dev->iobase + PCL818_DO_HI); // DO=$0000
+ outb(0, dev->iobase + PCL818_DO_LO);
+ comedi_udelay(1);
+ outb(0, dev->iobase + PCL818_CONTROL);
+ outb(0, dev->iobase + PCL818_CNTENABLE);
+ outb(0, dev->iobase + PCL818_MUX);
+ outb(0, dev->iobase + PCL818_CLRINT);
+ outb(0xb0, dev->iobase + PCL818_CTRCTL); /* Stop pacer */
+ outb(0x70, dev->iobase + PCL818_CTRCTL);
+ outb(0x30, dev->iobase + PCL818_CTRCTL);
+ if (this_board->is_818) {
+ outb(0, dev->iobase + PCL818_RANGE);
+ } else {
+ outb(0, dev->iobase + PCL718_DA2_LO);
+ outb(0, dev->iobase + PCL718_DA2_HI);
+ }
+}
+
+#ifdef unused
+/*
+==============================================================================
+ Enable(1)/disable(0) periodic interrupts from RTC
+*/
+static int set_rtc_irq_bit(unsigned char bit)
+{
+ unsigned char val;
+ unsigned long flags;
+
+ if (bit == 1) {
+ RTC_timer_lock++;
+ if (RTC_timer_lock > 1)
+ return 0;
+ } else {
+ RTC_timer_lock--;
+ if (RTC_timer_lock < 0)
+ RTC_timer_lock = 0;
+ if (RTC_timer_lock > 0)
+ return 0;
+ }
+
+ save_flags(flags);
+ cli();
+ val = CMOS_READ(RTC_CONTROL);
+ if (bit) {
+ val |= RTC_PIE;
+ } else {
+ val &= ~RTC_PIE;
+ }
+ CMOS_WRITE(val, RTC_CONTROL);
+ CMOS_READ(RTC_INTR_FLAGS);
+ restore_flags(flags);
+ return 0;
+}
+
+/*
+==============================================================================
+ Restart RTC if something stop it (xntpd every 11 mins or large IDE transfers)
+*/
+static void rtc_dropped_irq(unsigned long data)
+{
+ comedi_device *dev = (void *)data;
+ unsigned long flags, tmp;
+
+ switch (devpriv->int818_mode) {
+ case INT_TYPE_AI1_DMA_RTC:
+ case INT_TYPE_AI3_DMA_RTC:
+ mod_timer(&devpriv->rtc_irq_timer,
+ jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100);
+ save_flags(flags);
+ cli();
+ tmp = (CMOS_READ(RTC_INTR_FLAGS) & 0xF0); /* restart */
+ restore_flags(flags);
+ break;
+ };
+}
+
+/*
+==============================================================================
+ Set frequency of interrupts from RTC
+*/
+static int rtc_setfreq_irq(int freq)
+{
+ int tmp = 0;
+ int rtc_freq;
+ unsigned char val;
+ unsigned long flags;
+
+ if (freq < 2)
+ freq = 2;
+ if (freq > 8192)
+ freq = 8192;
+
+ while (freq > (1 << tmp))
+ tmp++;
+
+ rtc_freq = 1 << tmp;
+
+ save_flags(flags);
+ cli();
+ val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0;
+ val |= (16 - tmp);
+ CMOS_WRITE(val, RTC_FREQ_SELECT);
+ restore_flags(flags);
+ return rtc_freq;
+}
+#endif
+
+/*
+==============================================================================
+ Free any resources that we have claimed
+*/
+static void free_resources(comedi_device * dev)
+{
+ //rt_printk("free_resource()\n");
+ if (dev->private) {
+ pcl818_ai_cancel(dev, devpriv->sub_ai);
+ pcl818_reset(dev);
+ if (devpriv->dma)
+ free_dma(devpriv->dma);
+ if (devpriv->dmabuf[0])
+ free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
+ if (devpriv->dmabuf[1])
+ free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
+#ifdef unused
+ if (devpriv->rtc_irq)
+ comedi_free_irq(devpriv->rtc_irq, dev);
+ if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
+ if (devpriv->rtc_iobase)
+ release_region(devpriv->rtc_iobase,
+ devpriv->rtc_iosize);
+ }
+ if (devpriv->dma_rtc)
+ RTC_lock--;
+#endif
+ }
+
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (dev->iobase)
+ release_region(dev->iobase, devpriv->io_range);
+ //rt_printk("free_resource() end\n");
+}
+
+/*
+==============================================================================
+
+ Initialization
+
+*/
+static int pcl818_attach(comedi_device * dev, comedi_devconfig * it)
+{
+ int ret;
+ unsigned long iobase;
+ unsigned int irq, dma;
+ unsigned long pages;
+ comedi_subdevice *s;
+
+ if ((ret = alloc_private(dev, sizeof(pcl818_private))) < 0)
+ return ret; /* Can't alloc mem */
+
+ /* claim our I/O space */
+ iobase = it->options[0];
+ printk("comedi%d: pcl818: board=%s, ioport=0x%03lx",
+ dev->minor, this_board->name, iobase);
+ devpriv->io_range = this_board->io_range;
+ if ((this_board->fifo) && (it->options[2] == -1)) { // we've board with FIFO and we want to use FIFO
+ devpriv->io_range = PCLx1xFIFO_RANGE;
+ devpriv->usefifo = 1;
+ }
+ if (!request_region(iobase, devpriv->io_range, "pcl818")) {
+ rt_printk("I/O port conflict\n");
+ return -EIO;
+ }
+
+ dev->iobase = iobase;
+
+ if (pcl818_check(iobase)) {
+ rt_printk(", I can't detect board. FAIL!\n");
+ return -EIO;
+ }
+
+ /* set up some name stuff */
+ dev->board_name = this_board->name;
+ /* grab our IRQ */
+ irq = 0;
+ if (this_board->IRQbits != 0) { /* board support IRQ */
+ irq = it->options[1];
+ if (irq) { /* we want to use IRQ */
+ if (((1 << irq) & this_board->IRQbits) == 0) {
+ rt_printk
+ (", IRQ %u is out of allowed range, DISABLING IT",
+ irq);
+ irq = 0; /* Bad IRQ */
+ } else {
+ if (comedi_request_irq(irq, interrupt_pcl818, 0,
+ "pcl818", dev)) {
+ rt_printk
+ (", unable to allocate IRQ %u, DISABLING IT",
+ irq);
+ irq = 0; /* Can't use IRQ */
+ } else {
+ rt_printk(", irq=%u", irq);
+ }
+ }
+ }
+ }
+
+ dev->irq = irq;
+ if (irq) {
+ devpriv->irq_free = 1;
+ } /* 1=we have allocated irq */
+ else {
+ devpriv->irq_free = 0;
+ }
+ devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */
+ devpriv->ai_mode = 0; /* mode of irq */
+
+#ifdef unused
+ /* grab RTC for DMA operations */
+ devpriv->dma_rtc = 0;
+ if (it->options[2] > 0) { // we want to use DMA
+ if (RTC_lock == 0) {
+ if (!request_region(RTC_PORT(0), RTC_IO_EXTENT,
+ "pcl818 (RTC)"))
+ goto no_rtc;
+ }
+ devpriv->rtc_iobase = RTC_PORT(0);
+ devpriv->rtc_iosize = RTC_IO_EXTENT;
+ RTC_lock++;
+ if (!comedi_request_irq(RTC_IRQ,
+ interrupt_pcl818_ai_mode13_dma_rtc, 0,
+ "pcl818 DMA (RTC)", dev)) {
+ devpriv->dma_rtc = 1;
+ devpriv->rtc_irq = RTC_IRQ;
+ rt_printk(", dma_irq=%u", devpriv->rtc_irq);
+ } else {
+ RTC_lock--;
+ if (RTC_lock == 0) {
+ if (devpriv->rtc_iobase)
+ release_region(devpriv->rtc_iobase,
+ devpriv->rtc_iosize);
+ }
+ devpriv->rtc_iobase = 0;
+ devpriv->rtc_iosize = 0;
+ }
+ }
+
+ no_rtc:
+#endif
+ /* grab our DMA */
+ dma = 0;
+ devpriv->dma = dma;
+ if ((devpriv->irq_free == 0) && (devpriv->dma_rtc == 0))
+ goto no_dma; /* if we haven't IRQ, we can't use DMA */
+ if (this_board->DMAbits != 0) { /* board support DMA */
+ dma = it->options[2];
+ if (dma < 1)
+ goto no_dma; /* DMA disabled */
+ if (((1 << dma) & this_board->DMAbits) == 0) {
+ rt_printk(", DMA is out of allowed range, FAIL!\n");
+ return -EINVAL; /* Bad DMA */
+ }
+ ret = request_dma(dma, "pcl818");
+ if (ret) {
+ rt_printk(", unable to allocate DMA %u, FAIL!\n", dma);
+ return -EBUSY; /* DMA isn't free */
+ }
+ devpriv->dma = dma;
+ rt_printk(", dma=%u", dma);
+ pages = 2; /* we need 16KB */
+ devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
+ if (!devpriv->dmabuf[0]) {
+ rt_printk(", unable to allocate DMA buffer, FAIL!\n");
+ /* maybe experiment with try_to_free_pages() will help .... */
+ return -EBUSY; /* no buffer :-( */
+ }
+ devpriv->dmapages[0] = pages;
+ devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
+ devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
+ //rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE);
+ if (devpriv->dma_rtc == 0) { // we must do duble buff :-(
+ devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
+ if (!devpriv->dmabuf[1]) {
+ rt_printk
+ (", unable to allocate DMA buffer, FAIL!\n");
+ return -EBUSY;
+ }
+ devpriv->dmapages[1] = pages;
+ devpriv->hwdmaptr[1] =
+ virt_to_bus((void *)devpriv->dmabuf[1]);
+ devpriv->hwdmasize[1] = (1 << pages) * PAGE_SIZE;
+ }
+ }
+
+ no_dma:
+
+ if ((ret = alloc_subdevices(dev, 4)) < 0)
+ return ret;
+
+ s = dev->subdevices + 0;
+ if (!this_board->n_aichan_se) {
+ s->type = COMEDI_SUBD_UNUSED;
+ } else {
+ s->type = COMEDI_SUBD_AI;
+ devpriv->sub_ai = s;
+ s->subdev_flags = SDF_READABLE;
+ if (check_single_ended(dev->iobase)) {
+ s->n_chan = this_board->n_aichan_se;
+ s->subdev_flags |= SDF_COMMON | SDF_GROUND;
+ printk(", %dchans S.E. DAC", s->n_chan);
+ } else {
+ s->n_chan = this_board->n_aichan_diff;
+ s->subdev_flags |= SDF_DIFF;
+ printk(", %dchans DIFF DAC", s->n_chan);
+ }
+ s->maxdata = this_board->ai_maxdata;
+ s->len_chanlist = s->n_chan;
+ s->range_table = this_board->ai_range_type;
+ s->cancel = pcl818_ai_cancel;
+ s->insn_read = pcl818_ai_insn_read;
+ if ((irq) || (devpriv->dma_rtc)) {
+ dev->read_subdev = s;
+ s->subdev_flags |= SDF_CMD_READ;
+ s->do_cmdtest = ai_cmdtest;
+ s->do_cmd = ai_cmd;
+ }
+ if (this_board->is_818) {
+ if ((it->options[4] == 1) || (it->options[4] == 10))
+ s->range_table = &range_pcl818l_h_ai; // secondary range list jumper selectable
+ } else {
+ switch (it->options[4]) {
+ case 0:
+ s->range_table = &range_bipolar10;
+ break;
+ case 1:
+ s->range_table = &range_bipolar5;
+ break;
+ case 2:
+ s->range_table = &range_bipolar2_5;
+ break;
+ case 3:
+ s->range_table = &range718_bipolar1;
+ break;
+ case 4:
+ s->range_table = &range718_bipolar0_5;
+ break;
+ case 6:
+ s->range_table = &range_unipolar10;
+ break;
+ case 7:
+ s->range_table = &range_unipolar5;
+ break;
+ case 8:
+ s->range_table = &range718_unipolar2;
+ break;
+ case 9:
+ s->range_table = &range718_unipolar1;
+ break;
+ default:
+ s->range_table = &range_unknown;
+ break;
+ }
+ }
+ }
+
+ s = dev->subdevices + 1;
+ if (!this_board->n_aochan) {
+ s->type = COMEDI_SUBD_UNUSED;
+ } else {
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
+ s->n_chan = this_board->n_aochan;
+ s->maxdata = this_board->ao_maxdata;
+ s->len_chanlist = this_board->n_aochan;
+ s->range_table = this_board->ao_range_type;
+ s->insn_read = pcl818_ao_insn_read;
+ s->insn_write = pcl818_ao_insn_write;
+#ifdef unused
+#ifdef PCL818_MODE13_AO
+ if (irq) {
+ s->trig[1] = pcl818_ao_mode1;
+ s->trig[3] = pcl818_ao_mode3;
+ }
+#endif
+#endif
+ if (this_board->is_818) {
+ if ((it->options[4] == 1) || (it->options[4] == 10))
+ s->range_table = &range_unipolar10;
+ if (it->options[4] == 2)
+ s->range_table = &range_unknown;
+ } else {
+ if ((it->options[5] == 1) || (it->options[5] == 10))
+ s->range_table = &range_unipolar10;
+ if (it->options[5] == 2)
+ s->range_table = &range_unknown;
+ }
+ }
+
+ s = dev->subdevices + 2;
+ if (!this_board->n_dichan) {
+ s->type = COMEDI_SUBD_UNUSED;
+ } else {
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = this_board->n_dichan;
+ s->maxdata = 1;
+ s->len_chanlist = this_board->n_dichan;
+ s->range_table = &range_digital;
+ s->insn_bits = pcl818_di_insn_bits;
+ }
+
+ s = dev->subdevices + 3;
+ if (!this_board->n_dochan) {
+ s->type = COMEDI_SUBD_UNUSED;
+ } else {
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = this_board->n_dochan;
+ s->maxdata = 1;
+ s->len_chanlist = this_board->n_dochan;
+ s->range_table = &range_digital;
+ s->insn_bits = pcl818_do_insn_bits;
+ }
+
+ /* select 1/10MHz oscilator */
+ if ((it->options[3] == 0) || (it->options[3] == 10)) {
+ devpriv->i8253_osc_base = 100;
+ } else {
+ devpriv->i8253_osc_base = 1000;
+ }
+
+ /* max sampling speed */
+ devpriv->ns_min = this_board->ns_min;
+
+ if (!this_board->is_818) {
+ if ((it->options[6] == 1) || (it->options[6] == 100))
+ devpriv->ns_min = 10000; /* extended PCL718 to 100kHz DAC */
+ }
+
+ pcl818_reset(dev);
+
+ rt_printk("\n");
+
+ return 0;
+}
+
+/*
+==============================================================================
+ Removes device
+ */
+static int pcl818_detach(comedi_device * dev)
+{
+ // rt_printk("comedi%d: pcl818: remove\n", dev->minor);
+ free_resources(dev);
+ return 0;
+}
projects / linux-2.6-omap-h63xx.git / commitdiff