Supported chips:
* All Intel Core family
Prefix: 'coretemp'
- CPUID: family 0x6, models 0xe, 0xf
+ CPUID: family 0x6, models 0xe, 0xf, 0x16
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
Prefix: 'dme1737'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Provided by SMSC upon request and under NDA
+ * SMSC SCH3112, SCH3114, SCH3116
+ Prefix: 'sch311x'
+ Addresses scanned: none, address read from Super-I/O config space
+ Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
Authors:
Juerg Haefliger <juergh@gmail.com>
-----------
This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same) Super-I/O chips. This chip
-features monitoring of 3 temp sensors temp[1-3] (2 remote diodes and 1
-internal), 7 voltages in[0-6] (6 external and 1 internal) and 6 fan speeds
-fan[1-6]. Additionally, the chip implements 5 PWM outputs pwm[1-3,5-6] for
-controlling fan speeds both manually and automatically.
-
-Fan[3-6] and pwm[3,5-6] are optional features and their availability is
-dependent on the configuration of the chip. The driver will detect which
-features are present during initialization and create the sysfs attributes
-accordingly.
+SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O
+chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote
+diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up
+to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM
+outputs pwm[1-3,5-6] for controlling fan speeds both manually and
+automatically.
+
+For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6]
+and pwm[3,5-6] are optional features and their availability depends on the
+configuration of the chip. The driver will detect which features are present
+during initialization and create the sysfs attributes accordingly.
+
+For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
+pwm[5-6] don't exist.
+
+The hardware monitoring features of the DME1737 and A8000 are only accessible
+via SMBus, while the SCH311x only provides access via the ISA bus. The driver
+will therefore register itself as an I2C client driver if it detects a DME1737
+or A8000 and as a platform driver if it detects a SCH311x chip.
Voltage Monitoring
Prefix: 'f71805f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
+ * Fintek F71806F/FG
+ Prefix: 'f71872f'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Available from the Fintek website
* Fintek F71872F/FG
Prefix: 'f71872f'
Addresses scanned: none, address read from Super I/O config space
additional internal voltages monitored (VSB and battery). It also features
6 VID inputs. The VID inputs are not yet supported by this driver.
+The Fintek F71806F/FG Super-I/O chip is essentially the same as the
+F71872F/FG, and is undistinguishable therefrom.
+
The driver assumes that no more than one chip is present, which seems
reasonable.
can't have both on a given board.
The IT8716F, IT8718F and later IT8712F revisions have support for
-2 additional fans. They are not yet supported by the driver.
+2 additional fans. They are supported by the driver for the IT8716F and
+IT8718F but not for the IT8712F
The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
16-bit tachometer counters for fans 1 to 3. This is better (no more fan
It is a value in volts. When it is unconnected, you will often find the
value 3.50 V here.
-In addition to the alarms described above, there are a couple of additional
-ones. There is a BTI alarm, which gets triggered when an external chip has
-crossed its limits. Usually, this is connected to all LM75 chips; if at
-least one crosses its limits, this bit gets set. The CHAS alarm triggers
-if your computer case is open. The FIFO alarms should never trigger; it
-indicates an internal error. The SMI_IN alarm indicates some other chip
-has triggered an SMI interrupt. As we do not use SMI interrupts at all,
-this condition usually indicates there is a problem with some other
-device.
-
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
Addresses scanned: I2C 0x2c-0x2e
Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf
-Author:
+Authors:
Mark M. Hoffman <mhoffman@lightlink.com>
Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
Module Parameters
-----------------
-(specific to LM93)
* init: integer
Set to non-zero to force some initializations (default is 0).
* disable_block: integer
I.e. this parameter controls the VID pin input thresholds; if your VID
inputs are not working, try changing this. The default value is "0".
-(common among sensor drivers)
-* force: short array (min = 1, max = 48)
- List of adapter,address pairs to assume to be present. Autodetection
- of the target device will still be attempted. Use one of the more
- specific force directives below if this doesn't detect the device.
-* force_lm93: short array (min = 1, max = 48)
- List of adapter,address pairs which are unquestionably assumed to contain
- a 'lm93' chip
-* ignore: short array (min = 1, max = 48)
- List of adapter,address pairs not to scan
-* ignore_range: short array (min = 1, max = 48)
- List of adapter,start-addr,end-addr triples not to scan
-* probe: short array (min = 1, max = 48)
- List of adapter,address pairs to scan additionally
-* probe_range: short array (min = 1, max = 48)
- List of adapter,start-addr,end-addr triples to scan additionally
-
Hardware Description
--------------------
(from the datasheet)
-The LM93, hardware monitor, has a two wire digital interface compatible with
+The LM93 hardware monitor has a two wire digital interface compatible with
SMBus 2.0. Using an 8-bit ADC, the LM93 measures the temperature of two remote
diode connected transistors as well as its own die and 16 power supply
voltages. To set fan speed, the LM93 has two PWM outputs that are each
temperature readings for better control of fan speed. The LM93 has four
tachometer inputs to measure fan speed. Limit and status registers for all
measured values are included. The LM93 builds upon the functionality of
-previous motherboard management ASICs and uses some of the LM85 s features
+previous motherboard management ASICs and uses some of the LM85's features
(i.e. smart tachometer mode). It also adds measurement and control support
for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual
processor Xeon class motherboard with a minimum of external components.
-Driver Description
-------------------
-
-This driver implements support for the National Semiconductor LM93.
-
-
User Interface
--------------
prochot2_interval. The values in these files specify the intervals for
#P1_PROCHOT and #P2_PROCHOT, respectively. Selecting a value not in this
list will cause the driver to use the next largest interval. The available
-intervals are:
+intervals are (in seconds):
#PROCHOT intervals: 0.73, 1.46, 2.9, 5.8, 11.7, 23.3, 46.6, 93.2, 186, 372
non-zero integer to the sysfs file prochot_short.
The LM93 can also override the #PROCHOT pins by driving a PWM signal onto
-one or both of them. When overridden, the signal has a period of 3.56 mS,
+one or both of them. When overridden, the signal has a period of 3.56 ms,
a minimum pulse width of 5 clocks (at 22.5kHz => 6.25% duty cycle), and
a maximum pulse width of 80 clocks (at 22.5kHz => 99.88% duty cycle).
The sysfs files prochot1_override and prochot2_override contain boolean
-intgers which enable or disable the override function for #P1_PROCHOT and
+integers which enable or disable the override function for #P1_PROCHOT and
#P2_PROCHOT, respectively. The sysfs file prochot_override_duty_cycle
contains a value controlling the duty cycle for the PWM signal used when
the override function is enabled. This value ranges from 0 to 15, with 0
not available will cause the driver to use the next largest value. Also note
that this parameter has implications for the Smart Tach Mode (see above).
-PWM Output Frequencies: 12, 36, 48, 60, 72, 84, 96, 22500 (h/w default)
+PWM Output Frequencies (in Hz): 12, 36, 48, 60, 72, 84, 96, 22500 (default)
Automatic PWM:
The eight control sources are: temp1-temp4 (aka "zones" in the datasheet),
#PROCHOT 1 & 2, and #VRDHOT 1 & 2. The bindings are expressed as a bitmask
in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
- a "0" disables it. The h/w default is 0x0f (all temperatures bound).
+a "0" disables it. The h/w default is 0x0f (all temperatures bound).
0x01 - Temp 1
0x02 - Temp 2
gpio input state of 8 GPIO pins; read-only
-
-Sample Configuration File
--------------------------
-
-Here is a sample LM93 chip config for sensors.conf:
-
----------- cut here ----------
-chip "lm93-*"
-
-# VOLTAGE INPUTS
-
- # labels and scaling based on datasheet recommendations
- label in1 "+12V1"
- compute in1 @ * 12.945, @ / 12.945
- set in1_min 12 * 0.90
- set in1_max 12 * 1.10
-
- label in2 "+12V2"
- compute in2 @ * 12.945, @ / 12.945
- set in2_min 12 * 0.90
- set in2_max 12 * 1.10
-
- label in3 "+12V3"
- compute in3 @ * 12.945, @ / 12.945
- set in3_min 12 * 0.90
- set in3_max 12 * 1.10
-
- label in4 "FSB_Vtt"
-
- label in5 "3GIO"
-
- label in6 "ICH_Core"
-
- label in7 "Vccp1"
-
- label in8 "Vccp2"
-
- label in9 "+3.3V"
- set in9_min 3.3 * 0.90
- set in9_max 3.3 * 1.10
-
- label in10 "+5V"
- set in10_min 5.0 * 0.90
- set in10_max 5.0 * 1.10
-
- label in11 "SCSI_Core"
-
- label in12 "Mem_Core"
-
- label in13 "Mem_Vtt"
-
- label in14 "Gbit_Core"
-
- # Assuming R1/R2 = 4.1143, and 3.3V reference
- # -12V = (4.1143 + 1) * (@ - 3.3) + 3.3
- label in15 "-12V"
- compute in15 @ * 5.1143 - 13.57719, (@ + 13.57719) / 5.1143
- set in15_min -12 * 0.90
- set in15_max -12 * 1.10
-
- label in16 "+3.3VSB"
- set in16_min 3.3 * 0.90
- set in16_max 3.3 * 1.10
-
-# TEMPERATURE INPUTS
-
- label temp1 "CPU1"
- label temp2 "CPU2"
- label temp3 "LM93"
-
-# TACHOMETER INPUTS
-
- label fan1 "Fan1"
- set fan1_min 3000
- label fan2 "Fan2"
- set fan2_min 3000
- label fan3 "Fan3"
- set fan3_min 3000
- label fan4 "Fan4"
- set fan4_min 3000
-
-# PWM OUTPUTS
-
- label pwm1 "CPU1"
- label pwm2 "CPU2"
-
alarm (for example, whether a threshold must be met or must be exceeded
to cause an alarm) is chip-dependent.
+When setting values of hwmon sysfs attributes, the string representation of
+the desired value must be written, note that strings which are not a number
+are interpreted as 0! For more on how written strings are interpreted see the
+"sysfs attribute writes interpretation" section at the end of this file.
-------------------------------------------------------------------------
Read/write values may be read-only for some chips, depending on the
hardware implementation.
-All entries are optional, and should only be created in a given driver
-if the chip has the feature.
+All entries (except name) are optional, and should only be created in a
+given driver if the chip has the feature.
+
+
+********
+* Name *
+********
+
+name The chip name.
+ This should be a short, lowercase string, not containing
+ spaces nor dashes, representing the chip name. This is
+ the only mandatory attribute.
+ I2C devices get this attribute created automatically.
+ RO
+
************
* Voltages *
by the chip driver, and must be done by the application.
However, some drivers (notably lm87 and via686a)
do scale, because of internal resistors built into a chip.
- These drivers will output the actual voltage.
-
- Typical usage:
- in0_* CPU #1 voltage (not scaled)
- in1_* CPU #2 voltage (not scaled)
- in2_* 3.3V nominal (not scaled)
- in3_* 5.0V nominal (scaled)
- in4_* 12.0V nominal (scaled)
- in5_* -12.0V nominal (scaled)
- in6_* -5.0V nominal (scaled)
- in7_* varies
- in8_* varies
+ These drivers will output the actual voltage. Rule of
+ thumb: drivers should report the voltage values at the
+ "pins" of the chip.
+
+in[0-*]_label Suggested voltage channel label.
+ Text string
+ Should only be created if the driver has hints about what
+ this voltage channel is being used for, and user-space
+ doesn't. In all other cases, the label is provided by
+ user-space.
+ RO
cpu[0-*]_vid CPU core reference voltage.
Unit: millivolt
Only makes sense if the chip supports closed-loop fan speed
control based on the measured fan speed.
+fan[1-*]_label Suggested fan channel label.
+ Text string
+ Should only be created if the driver has hints about what
+ this fan channel is being used for, and user-space doesn't.
+ In all other cases, the label is provided by user-space.
+ RO
+
Also see the Alarms section for status flags associated with fans.
****************
temp[1-*]_type Sensor type selection.
- Integers 1 to 6 or thermistor Beta value (typically 3435)
+ Integers 1 to 6
RW
1: PII/Celeron Diode
2: 3904 transistor
3: thermal diode
- 4: thermistor (default/unknown Beta)
+ 4: thermistor
5: AMD AMDSI
6: Intel PECI
Not all types are supported by all chips
from the critical value.
RW
-temp[1-4]_offset
+temp[1-*]_offset
Temperature offset which is added to the temperature reading
by the chip.
Unit: millidegree Celsius
Read/Write value.
- If there are multiple temperature sensors, temp1_* is
- generally the sensor inside the chip itself,
- reported as "motherboard temperature". temp2_* to
- temp4_* are generally sensors external to the chip
- itself, for example the thermal diode inside the CPU or
- a thermistor nearby.
+temp[1-*]_label Suggested temperature channel label.
+ Text string
+ Should only be created if the driver has hints about what
+ this temperature channel is being used for, and user-space
+ doesn't. In all other cases, the label is provided by
+ user-space.
+ RO
Some chips measure temperature using external thermistors and an ADC, and
report the temperature measurement as a voltage. Converting this voltage
RW
-*********
-* Other *
-*********
-
-eeprom Raw EEPROM data in binary form.
- RO
-
-pec Enable or disable PEC (SMBus only)
- 0: disable
- 1: enable
- RW
+sysfs attribute writes interpretation
+-------------------------------------
+
+hwmon sysfs attributes always contain numbers, so the first thing to do is to
+convert the input to a number, there are 2 ways todo this depending whether
+the number can be negative or not:
+unsigned long u = simple_strtoul(buf, NULL, 10);
+long s = simple_strtol(buf, NULL, 10);
+
+With buf being the buffer with the user input being passed by the kernel.
+Notice that we do not use the second argument of strto[u]l, and thus cannot
+tell when 0 is returned, if this was really 0 or is caused by invalid input.
+This is done deliberately as checking this everywhere would add a lot of
+code to the kernel.
+
+Notice that it is important to always store the converted value in an
+unsigned long or long, so that no wrap around can happen before any further
+checking.
+
+After the input string is converted to an (unsigned) long, the value should be
+checked if its acceptable. Be careful with further conversions on the value
+before checking it for validity, as these conversions could still cause a wrap
+around before the check. For example do not multiply the result, and only
+add/subtract if it has been divided before the add/subtract.
+
+What to do if a value is found to be invalid, depends on the type of the
+sysfs attribute that is being set. If it is a continuous setting like a
+tempX_max or inX_max attribute, then the value should be clamped to its
+limits using SENSORS_LIMIT(value, min_limit, max_limit). If it is not
+continuous like for example a tempX_type, then when an invalid value is
+written, -EINVAL should be returned.
+
+Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees):
+
+ long v = simple_strtol(buf, NULL, 10) / 1000;
+ v = SENSORS_LIMIT(v, -128, 127);
+ /* write v to register */
+
+Example2, fan divider setting, valid values 2, 4 and 8:
+
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ switch (v) {
+ case 2: v = 1; break;
+ case 4: v = 2; break;
+ case 8: v = 3; break;
+ default:
+ return -EINVAL;
+ }
+ /* write v to register */
An alarm is triggered if the voltage has crossed a programmable minimum
or maximum limit.
-The bit ordering for the alarm "realtime status register" and the
-"beep enable registers" are different.
-
-in0 (VCORE) : alarms: 0x000001 beep_enable: 0x000001
-in1 (VINR0) : alarms: 0x000002 beep_enable: 0x002000 <== mismatch
-in2 (+3.3VIN): alarms: 0x000004 beep_enable: 0x000004
-in3 (5VDD) : alarms: 0x000008 beep_enable: 0x000008
-in4 (+12VIN) : alarms: 0x000100 beep_enable: 0x000100
-in5 (-12VIN) : alarms: 0x000200 beep_enable: 0x000200
-in6 (-5VIN) : alarms: 0x000400 beep_enable: 0x000400
-in7 (VSB) : alarms: 0x080000 beep_enable: 0x010000 <== mismatch
-in8 (VBAT) : alarms: 0x100000 beep_enable: 0x020000 <== mismatch
-in9 (VINR1) : alarms: 0x004000 beep_enable: 0x004000
-temp1 : alarms: 0x000010 beep_enable: 0x000010
-temp2 : alarms: 0x000020 beep_enable: 0x000020
-temp3 : alarms: 0x002000 beep_enable: 0x000002 <== mismatch
-fan1 : alarms: 0x000040 beep_enable: 0x000040
-fan2 : alarms: 0x000080 beep_enable: 0x000080
-fan3 : alarms: 0x000800 beep_enable: 0x000800
-fan4 : alarms: 0x200000 beep_enable: 0x200000
-fan5 : alarms: 0x400000 beep_enable: 0x400000
-tart1 : alarms: 0x010000 beep_enable: 0x040000 <== mismatch
-tart2 : alarms: 0x020000 beep_enable: 0x080000 <== mismatch
-tart3 : alarms: 0x040000 beep_enable: 0x100000 <== mismatch
-case_open : alarms: 0x001000 beep_enable: 0x001000
-user_enable : alarms: -------- beep_enable: 0x800000
-
-*** NOTE: It is the responsibility of user-space code to handle the fact
-that the beep enable and alarm bits are in different positions when using that
-feature of the chip.
-
-When an alarm goes off, you can be warned by a beeping signal through your
-computer speaker. It is possible to enable all beeping globally, or only
-the beeping for some alarms.
-
-The driver only reads the chip values each 3 seconds; reading them more
-often will do no harm, but will return 'old' values.
+The w83791d has a global bit used to enable beeping from the speaker when an
+alarm is triggered as well as a bitmask to enable or disable the beep for
+specific alarms. You need both the global beep enable bit and the
+corresponding beep bit to be on for a triggered alarm to sound a beep.
+
+The sysfs interface to the gloabal enable is via the sysfs beep_enable file.
+This file is used for both legacy and new code.
+
+The sysfs interface to the beep bitmask has migrated from the original legacy
+method of a single sysfs beep_mask file to a newer method using multiple
+*_beep files as described in .../Documentation/hwmon/sysfs-interface.
+
+A similar change has occured for the bitmap corresponding to the alarms. The
+original legacy method used a single sysfs alarms file containing a bitmap
+of triggered alarms. The newer method uses multiple sysfs *_alarm files
+(again following the pattern described in sysfs-interface).
+
+Since both methods read and write the underlying hardware, they can be used
+interchangeably and changes in one will automatically be reflected by
+the other. If you use the legacy bitmask method, your user-space code is
+responsible for handling the fact that the alarms and beep_mask bitmaps
+are not the same (see the table below).
+
+NOTE: All new code should be written to use the newer sysfs-interface
+specification as that avoids bitmap problems and is the preferred interface
+going forward.
+
+The driver reads the hardware chip values at most once every three seconds.
+User mode code requesting values more often will receive cached values.
+
+Alarms bitmap vs. beep_mask bitmask
+------------------------------------
+For legacy code using the alarms and beep_mask files:
+
+in0 (VCORE) : alarms: 0x000001 beep_mask: 0x000001
+in1 (VINR0) : alarms: 0x000002 beep_mask: 0x002000 <== mismatch
+in2 (+3.3VIN): alarms: 0x000004 beep_mask: 0x000004
+in3 (5VDD) : alarms: 0x000008 beep_mask: 0x000008
+in4 (+12VIN) : alarms: 0x000100 beep_mask: 0x000100
+in5 (-12VIN) : alarms: 0x000200 beep_mask: 0x000200
+in6 (-5VIN) : alarms: 0x000400 beep_mask: 0x000400
+in7 (VSB) : alarms: 0x080000 beep_mask: 0x010000 <== mismatch
+in8 (VBAT) : alarms: 0x100000 beep_mask: 0x020000 <== mismatch
+in9 (VINR1) : alarms: 0x004000 beep_mask: 0x004000
+temp1 : alarms: 0x000010 beep_mask: 0x000010
+temp2 : alarms: 0x000020 beep_mask: 0x000020
+temp3 : alarms: 0x002000 beep_mask: 0x000002 <== mismatch
+fan1 : alarms: 0x000040 beep_mask: 0x000040
+fan2 : alarms: 0x000080 beep_mask: 0x000080
+fan3 : alarms: 0x000800 beep_mask: 0x000800
+fan4 : alarms: 0x200000 beep_mask: 0x200000
+fan5 : alarms: 0x400000 beep_mask: 0x400000
+tart1 : alarms: 0x010000 beep_mask: 0x040000 <== mismatch
+tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch
+tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch
+case_open : alarms: 0x001000 beep_mask: 0x001000
+global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable)
W83791D TODO:
---------------
-Provide a patch for per-file alarms and beep enables as defined in the hwmon
- documentation (Documentation/hwmon/sysfs-interface)
Provide a patch for smart-fan control (still need appropriate motherboard/fans)
M: mhoffman@lightlink.com
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
-T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git
+T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing
+T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release
S: Maintained
HARDWARE RANDOM NUMBER GENERATOR CORE
P: Charles Spirakis
M: bezaur@gmail.com
L: lm-sensors@lm-sensors.org
-S: Maintained
+S: Odd Fixes
W83793 HARDWARE MONITORING DRIVER
P: Rudolf Marek
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
- depends on EXPERIMENTAL
+ depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
config SENSORS_ABITUGURU3
tristate "Abit uGuru (rev 3)"
- depends on HWMON && EXPERIMENTAL
+ depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_ADT7470
+ tristate "Analog Devices ADT7470"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7470 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7470.
+
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
- depends on I2C && EXPERIMENTAL
+ depends on X86 && I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the ASB100 Bach sensor
will be called ds1621.
config SENSORS_F71805F
- tristate "Fintek F71805F/FG and F71872F/FG"
+ tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71805F/FG and F71872F/FG Super-I/O
- chips.
+ features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+ Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71805f.
+config SENSORS_F71882FG
+ tristate "Fintek F71882FG and F71883FG"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71882FG and F71883FG Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called f71882fg.
+
+config SENSORS_F75375S
+ tristate "Fintek F75375S/SP and F75373";
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F75375S/SP and F75373
+
+ This driver can also be built as a module. If so, the module
+ will be called f75375s.
+
config SENSORS_FSCHER
tristate "FSC Hermes"
- depends on I2C
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
config SENSORS_FSCPOS
tristate "FSC Poseidon"
- depends on I2C
+ depends on X86 && I2C
help
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
This driver can also be built as a module. If so, the module
will be called fscpos.
+config SENSORS_FSCHMD
+ tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
+ depends on X86 && I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for various Fujitsu Siemens
+ Computers sensor chips.
+
+ This is a new merged driver for FSC sensor chips which is intended
+ as a replacment for the fscpos, fscscy and fscher drivers and adds
+ support for several other FCS sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fschmd.
+
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
depends on I2C
sensor inside your CPU. Supported all are all known variants
of Intel Core family.
+config SENSORS_IBMPEX
+ tristate "IBM PowerExecutive temperature/power sensors"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors in various IBM System X servers that support
+ PowerExecutive. So far this includes the x3550, x3650, x3655,
+ x3755, and certain HS20 blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmpex.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
select HWMON_VID
config SENSORS_LM93
tristate "National Semiconductor LM93 and compatibles"
- depends on HWMON && I2C
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM93
will be called sis5595.
config SENSORS_DME1737
- tristate "SMSC DME1737 and compatibles"
+ tristate "SMSC DME1737, SCH311x and compatibles"
depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the hardware monitoring
and fan control features of the SMSC DME1737 (and compatibles
- like the Asus A8000) Super-I/O chip.
+ like the Asus A8000) and SCH311x Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called dme1737.
obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
+obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
+obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
+obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
+obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o
obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
+obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
The structure is dynamically allocated, at the same time when a new
abituguru device is allocated. */
struct abituguru_data {
- struct class_device *class_dev; /* hwmon registered device */
+ struct device *hwmon_dev; /* hwmon registered device */
struct mutex update_lock; /* protect access to data and uGuru */
unsigned long last_updated; /* In jiffies */
unsigned short addr; /* uguru base address */
&abituguru_sysfs_attr[i].dev_attr))
goto abituguru_probe_error;
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (!IS_ERR(data->class_dev))
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (!IS_ERR(data->hwmon_dev))
return 0; /* success */
- res = PTR_ERR(data->class_dev);
+ res = PTR_ERR(data->hwmon_dev);
abituguru_probe_error:
for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
int i;
struct abituguru_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++)
The structure is dynamically allocated, at the same time when a new
abituguru3 device is allocated. */
struct abituguru3_data {
- struct class_device *class_dev; /* hwmon registered device */
+ struct device *hwmon_dev; /* hwmon registered device */
struct mutex update_lock; /* protect access to data and uGuru */
unsigned short addr; /* uguru base address */
char valid; /* !=0 if following fields are valid */
&abituguru3_sysfs_attr[i].dev_attr))
goto abituguru3_probe_error;
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- res = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ res = PTR_ERR(data->hwmon_dev);
goto abituguru3_probe_error;
}
struct abituguru3_data *data = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
struct ad7418_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct attribute_group attrs;
enum chips type;
struct mutex lock;
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct ad7418_data *data = i2c_get_clientdata(client);
- int temp = simple_strtol(buf, NULL, 10);
+ long temp = simple_strtol(buf, NULL, 10);
mutex_lock(&data->lock);
data->temp[attr->index] = LM75_TEMP_TO_REG(temp);
if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
static int ad7418_detach_client(struct i2c_client *client)
{
struct ad7418_data *data = i2c_get_clientdata(client);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &data->attrs);
i2c_detach_client(client);
kfree(data);
/*
adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
+ monitoring
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
Philip Edelbrock <phil@netroedge.com>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
0x29, 0x2a, 0x2b,
- 0x4c, 0x4d, 0x4e,
+ 0x4c, 0x4d, 0x4e,
I2C_CLIENT_END };
/* Insmod parameters */
-I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
+I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm,
+ mc1066);
/* adm1021 constants specified below */
/* The adm1021 registers */
/* Read-only */
-#define ADM1021_REG_TEMP 0x00
-#define ADM1021_REG_REMOTE_TEMP 0x01
+/* For nr in 0-1 */
+#define ADM1021_REG_TEMP(nr) (nr)
#define ADM1021_REG_STATUS 0x02
-#define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
-#define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */
-#define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */
+/* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */
+#define ADM1021_REG_MAN_ID 0xFE
+/* ADM1021 = 0x0X, ADM1023 = 0x3X */
+#define ADM1021_REG_DEV_ID 0xFF
/* These use different addresses for reading/writing */
#define ADM1021_REG_CONFIG_R 0x03
#define ADM1021_REG_CONFIG_W 0x09
#define ADM1021_REG_CONV_RATE_R 0x04
#define ADM1021_REG_CONV_RATE_W 0x0A
/* These are for the ADM1023's additional precision on the remote temp sensor */
-#define ADM1021_REG_REM_TEMP_PREC 0x010
-#define ADM1021_REG_REM_OFFSET 0x011
-#define ADM1021_REG_REM_OFFSET_PREC 0x012
-#define ADM1021_REG_REM_TOS_PREC 0x013
-#define ADM1021_REG_REM_THYST_PREC 0x014
+#define ADM1023_REG_REM_TEMP_PREC 0x10
+#define ADM1023_REG_REM_OFFSET 0x11
+#define ADM1023_REG_REM_OFFSET_PREC 0x12
+#define ADM1023_REG_REM_TOS_PREC 0x13
+#define ADM1023_REG_REM_THYST_PREC 0x14
/* limits */
-#define ADM1021_REG_TOS_R 0x05
-#define ADM1021_REG_TOS_W 0x0B
-#define ADM1021_REG_REMOTE_TOS_R 0x07
-#define ADM1021_REG_REMOTE_TOS_W 0x0D
-#define ADM1021_REG_THYST_R 0x06
-#define ADM1021_REG_THYST_W 0x0C
-#define ADM1021_REG_REMOTE_THYST_R 0x08
-#define ADM1021_REG_REMOTE_THYST_W 0x0E
+/* For nr in 0-1 */
+#define ADM1021_REG_TOS_R(nr) (0x05 + 2 * (nr))
+#define ADM1021_REG_TOS_W(nr) (0x0B + 2 * (nr))
+#define ADM1021_REG_THYST_R(nr) (0x06 + 2 * (nr))
+#define ADM1021_REG_THYST_W(nr) (0x0C + 2 * (nr))
/* write-only */
#define ADM1021_REG_ONESHOT 0x0F
-
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
-/* Conversions note: 1021 uses normal integer signed-byte format*/
-#define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000)
-#define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255))
-
/* Initial values */
-/* Note: Even though I left the low and high limits named os and hyst,
-they don't quite work like a thermostat the way the LM75 does. I.e.,
-a lower temp than THYST actually triggers an alarm instead of
+/* Note: Even though I left the low and high limits named os and hyst,
+they don't quite work like a thermostat the way the LM75 does. I.e.,
+a lower temp than THYST actually triggers an alarm instead of
clearing it. Weird, ey? --Phil */
/* Each client has this additional data */
struct adm1021_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
enum chips type;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- u8 temp_max; /* Register values */
- u8 temp_hyst;
- u8 temp_input;
- u8 remote_temp_max;
- u8 remote_temp_hyst;
- u8 remote_temp_input;
- u8 alarms;
- /* Special values for ADM1023 only */
- u8 remote_temp_prec;
- u8 remote_temp_os_prec;
- u8 remote_temp_hyst_prec;
- u8 remote_temp_offset;
- u8 remote_temp_offset_prec;
+ s8 temp_max[2]; /* Register values */
+ s8 temp_min[2];
+ s8 temp[2];
+ u8 alarms;
+ /* Special values for ADM1023 only */
+ u8 remote_temp_prec;
+ u8 remote_temp_os_prec;
+ u8 remote_temp_hyst_prec;
+ u8 remote_temp_offset;
+ u8 remote_temp_offset_prec;
};
static int adm1021_attach_adapter(struct i2c_adapter *adapter);
static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
static void adm1021_init_client(struct i2c_client *client);
static int adm1021_detach_client(struct i2c_client *client);
-static int adm1021_read_value(struct i2c_client *client, u8 reg);
-static int adm1021_write_value(struct i2c_client *client, u8 reg,
- u16 value);
static struct adm1021_data *adm1021_update_device(struct device *dev);
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
.detach_client = adm1021_detach_client,
};
-#define show(value) \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1021_data *data = adm1021_update_device(dev); \
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct adm1021_data *data = adm1021_update_device(dev);
+
+ return sprintf(buf, "%d\n", 1000 * data->temp[index]);
}
-show(temp_max);
-show(temp_hyst);
-show(temp_input);
-show(remote_temp_max);
-show(remote_temp_hyst);
-show(remote_temp_input);
-
-#define show2(value) \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct adm1021_data *data = adm1021_update_device(dev); \
- return sprintf(buf, "%d\n", data->value); \
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct adm1021_data *data = adm1021_update_device(dev);
+
+ return sprintf(buf, "%d\n", 1000 * data->temp_max[index]);
}
-show2(alarms);
-
-#define set(value, reg) \
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm1021_data *data = i2c_get_clientdata(client); \
- int temp = simple_strtoul(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->value = TEMP_TO_REG(temp); \
- adm1021_write_value(client, reg, data->value); \
- mutex_unlock(&data->update_lock); \
- return count; \
+
+static ssize_t show_temp_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct adm1021_data *data = adm1021_update_device(dev);
+
+ return sprintf(buf, "%d\n", 1000 * data->temp_min[index]);
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct adm1021_data *data = adm1021_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
+}
+
+static ssize_t show_alarms(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct adm1021_data *data = adm1021_update_device(dev);
+ return sprintf(buf, "%u\n", data->alarms);
}
-set(temp_max, ADM1021_REG_TOS_W);
-set(temp_hyst, ADM1021_REG_THYST_W);
-set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W);
-set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W);
-
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
-static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
-static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
-static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL);
-static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t set_temp_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1021_data *data = i2c_get_clientdata(client);
+ long temp = simple_strtol(buf, NULL, 10) / 1000;
+
+ mutex_lock(&data->update_lock);
+ data->temp_max[index] = SENSORS_LIMIT(temp, -128, 127);
+ if (!read_only)
+ i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
+ data->temp_max[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_temp_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1021_data *data = i2c_get_clientdata(client);
+ long temp = simple_strtol(buf, NULL, 10) / 1000;
+
+ mutex_lock(&data->update_lock);
+ data->temp_min[index] = SENSORS_LIMIT(temp, -128, 127);
+ if (!read_only)
+ i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
+ data->temp_min[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static int adm1021_attach_adapter(struct i2c_adapter *adapter)
{
}
static struct attribute *adm1021_attributes[] = {
- &dev_attr_temp1_max.attr,
- &dev_attr_temp1_min.attr,
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_max.attr,
- &dev_attr_temp2_min.attr,
- &dev_attr_temp2_input.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&dev_attr_alarms.attr,
NULL
};
static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i;
- struct i2c_client *new_client;
+ struct i2c_client *client;
struct adm1021_data *data;
int err = 0;
const char *type_name = "";
+ int conv_rate, status, config;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ pr_debug("adm1021: detect failed, "
+ "smbus byte data not supported!\n");
goto error0;
+ }
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
- But it allows us to access adm1021_{read,write}_value. */
+ But it allows us to access adm1021 register values. */
if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
+ pr_debug("adm1021: detect failed, kzalloc failed!\n");
err = -ENOMEM;
goto error0;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &adm1021_driver;
- new_client->flags = 0;
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &adm1021_driver;
+ status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS);
+ conv_rate = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_CONV_RATE_R);
+ config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);
/* Now, we do the remaining detection. */
if (kind < 0) {
- if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00
- || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00
- || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) {
+ if ((status & 0x03) != 0x00 || (config & 0x3F) != 0x00
+ || (conv_rate & 0xF8) != 0x00) {
+ pr_debug("adm1021: detect failed, "
+ "chip not detected!\n");
err = -ENODEV;
goto error1;
}
/* Determine the chip type. */
if (kind <= 0) {
- i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID);
+ i = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
if (i == 0x41)
- if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030)
+ if ((i2c_smbus_read_byte_data(client,
+ ADM1021_REG_DEV_ID) & 0xF0) == 0x30)
kind = adm1023;
else
kind = adm1021;
else if (i == 0x23)
kind = gl523sm;
else if ((i == 0x4d) &&
- (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01))
+ (i2c_smbus_read_byte_data(client,
+ ADM1021_REG_DEV_ID) == 0x01))
kind = max1617a;
else if (i == 0x54)
kind = mc1066;
/* LM84 Mfr ID in a different place, and it has more unused bits */
- else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00
- && (kind == 0 /* skip extra detection */
- || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00
- && (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00)))
+ else if (conv_rate == 0x00
+ && (kind == 0 /* skip extra detection */
+ || ((config & 0x7F) == 0x00
+ && (status & 0xAB) == 0x00)))
kind = lm84;
else
kind = max1617;
} else if (kind == mc1066) {
type_name = "mc1066";
}
+ pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
+ type_name, i2c_adapter_id(adapter), address);
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+ /* Fill in the remaining client fields */
+ strlcpy(client->name, type_name, I2C_NAME_SIZE);
data->type = kind;
- data->valid = 0;
mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
+ if ((err = i2c_attach_client(client)))
goto error1;
/* Initialize the ADM1021 chip */
- if (kind != lm84)
- adm1021_init_client(new_client);
+ if (kind != lm84 && !read_only)
+ adm1021_init_client(client);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1021_group)))
+ if ((err = sysfs_create_group(&client->dev.kobj, &adm1021_group)))
goto error2;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto error3;
}
return 0;
error3:
- sysfs_remove_group(&new_client->dev.kobj, &adm1021_group);
+ sysfs_remove_group(&client->dev.kobj, &adm1021_group);
error2:
- i2c_detach_client(new_client);
+ i2c_detach_client(client);
error1:
kfree(data);
error0:
static void adm1021_init_client(struct i2c_client *client)
{
/* Enable ADC and disable suspend mode */
- adm1021_write_value(client, ADM1021_REG_CONFIG_W,
- adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF);
+ i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
+ i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF);
/* Set Conversion rate to 1/sec (this can be tinkered with) */
- adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04);
+ i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
}
static int adm1021_detach_client(struct i2c_client *client)
struct adm1021_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1021_group);
if ((err = i2c_detach_client(client)))
return 0;
}
-/* All registers are byte-sized */
-static int adm1021_read_value(struct i2c_client *client, u8 reg)
-{
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
- if (!read_only)
- return i2c_smbus_write_byte_data(client, reg, value);
- return 0;
-}
-
static struct adm1021_data *adm1021_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
+ int i;
+
dev_dbg(&client->dev, "Starting adm1021 update\n");
- data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
- data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R);
- data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R);
- data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP);
- data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R);
- data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R);
- data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c;
+ for (i = 0; i < 2; i++) {
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_TEMP(i));
+ data->temp_max[i] = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_TOS_R(i));
+ data->temp_min[i] = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_THYST_R(i));
+ }
+ data->alarms = i2c_smbus_read_byte_data(client,
+ ADM1021_REG_STATUS) & 0x7c;
if (data->type == adm1023) {
- data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC);
- data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC);
- data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC);
- data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET);
- data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC);
+ data->remote_temp_prec =
+ i2c_smbus_read_byte_data(client,
+ ADM1023_REG_REM_TEMP_PREC);
+ data->remote_temp_os_prec =
+ i2c_smbus_read_byte_data(client,
+ ADM1023_REG_REM_TOS_PREC);
+ data->remote_temp_hyst_prec =
+ i2c_smbus_read_byte_data(client,
+ ADM1023_REG_REM_THYST_PREC);
+ data->remote_temp_offset =
+ i2c_smbus_read_byte_data(client,
+ ADM1023_REG_REM_OFFSET);
+ data->remote_temp_offset_prec =
+ i2c_smbus_read_byte_data(client,
+ ADM1023_REG_REM_OFFSET_PREC);
}
data->last_updated = jiffies;
data->valid = 1;
struct adm1025_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct adm1025_data *data = adm1025_update_device(dev);
+ struct adm1025_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
goto exit_remove;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
struct adm1025_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1025_group);
sysfs_remove_group(&client->dev.kobj, &adm1025_group_opt);
struct adm1026_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
enum chips type;
struct mutex update_lock;
static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct adm1026_data *data = adm1026_update_device(dev);
+ struct adm1026_data *data = dev_get_drvdata(dev);
return sprintf(buf,"%d\n", data->vrm);
}
static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1026_group)))
goto exitdetach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exitremove;
}
static int adm1026_detach_client(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1026_group);
i2c_detach_client(client);
kfree(data);
struct adm1029_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct adm1029_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1029_group);
if ((err = i2c_detach_client(client)))
/* Each client has this additional data */
struct adm1031_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
int chip_type;
char valid; /* !=0 if following fields are valid */
goto exit_remove;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
struct adm1031_data *data = i2c_get_clientdata(client);
int ret;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm1031_group);
sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
if ((ret = i2c_detach_client(client)) != 0) {
struct adm9240_data {
enum chips type;
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid;
unsigned long last_updated_measure;
if ((err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
struct adm9240_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adm9240_group);
if ((err = i2c_detach_client(client)))
--- /dev/null
+/*
+ * A hwmon driver for the Analog Devices ADT7470
+ * Copyright (C) 2007 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(adt7470);
+
+/* ADT7470 registers */
+#define ADT7470_REG_BASE_ADDR 0x20
+#define ADT7470_REG_TEMP_BASE_ADDR 0x20
+#define ADT7470_REG_TEMP_MAX_ADDR 0x29
+#define ADT7470_REG_FAN_BASE_ADDR 0x2A
+#define ADT7470_REG_FAN_MAX_ADDR 0x31
+#define ADT7470_REG_PWM_BASE_ADDR 0x32
+#define ADT7470_REG_PWM_MAX_ADDR 0x35
+#define ADT7470_REG_PWM_MAX_BASE_ADDR 0x38
+#define ADT7470_REG_PWM_MAX_MAX_ADDR 0x3B
+#define ADT7470_REG_CFG 0x40
+#define ADT7470_FSPD_MASK 0x04
+#define ADT7470_REG_ALARM1 0x41
+#define ADT7470_REG_ALARM2 0x42
+#define ADT7470_REG_TEMP_LIMITS_BASE_ADDR 0x44
+#define ADT7470_REG_TEMP_LIMITS_MAX_ADDR 0x57
+#define ADT7470_REG_FAN_MIN_BASE_ADDR 0x58
+#define ADT7470_REG_FAN_MIN_MAX_ADDR 0x5F
+#define ADT7470_REG_FAN_MAX_BASE_ADDR 0x60
+#define ADT7470_REG_FAN_MAX_MAX_ADDR 0x67
+#define ADT7470_REG_PWM_CFG_BASE_ADDR 0x68
+#define ADT7470_REG_PWM12_CFG 0x68
+#define ADT7470_PWM2_AUTO_MASK 0x40
+#define ADT7470_PWM1_AUTO_MASK 0x80
+#define ADT7470_REG_PWM34_CFG 0x69
+#define ADT7470_PWM3_AUTO_MASK 0x40
+#define ADT7470_PWM4_AUTO_MASK 0x80
+#define ADT7470_REG_PWM_MIN_BASE_ADDR 0x6A
+#define ADT7470_REG_PWM_MIN_MAX_ADDR 0x6D
+#define ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR 0x6E
+#define ADT7470_REG_PWM_TEMP_MIN_MAX_ADDR 0x71
+#define ADT7470_REG_ACOUSTICS12 0x75
+#define ADT7470_REG_ACOUSTICS34 0x76
+#define ADT7470_REG_DEVICE 0x3D
+#define ADT7470_REG_VENDOR 0x3E
+#define ADT7470_REG_REVISION 0x3F
+#define ADT7470_REG_ALARM1_MASK 0x72
+#define ADT7470_REG_ALARM2_MASK 0x73
+#define ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR 0x7C
+#define ADT7470_REG_PWM_AUTO_TEMP_MAX_ADDR 0x7D
+#define ADT7470_REG_MAX_ADDR 0x81
+
+#define ADT7470_TEMP_COUNT 10
+#define ADT7470_TEMP_REG(x) (ADT7470_REG_TEMP_BASE_ADDR + (x))
+#define ADT7470_TEMP_MIN_REG(x) (ADT7470_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2))
+#define ADT7470_TEMP_MAX_REG(x) (ADT7470_REG_TEMP_LIMITS_BASE_ADDR + \
+ ((x) * 2) + 1)
+
+#define ADT7470_FAN_COUNT 4
+#define ADT7470_REG_FAN(x) (ADT7470_REG_FAN_BASE_ADDR + ((x) * 2))
+#define ADT7470_REG_FAN_MIN(x) (ADT7470_REG_FAN_MIN_BASE_ADDR + ((x) * 2))
+#define ADT7470_REG_FAN_MAX(x) (ADT7470_REG_FAN_MAX_BASE_ADDR + ((x) * 2))
+
+#define ADT7470_PWM_COUNT 4
+#define ADT7470_REG_PWM(x) (ADT7470_REG_PWM_BASE_ADDR + (x))
+#define ADT7470_REG_PWM_MAX(x) (ADT7470_REG_PWM_MAX_BASE_ADDR + (x))
+#define ADT7470_REG_PWM_MIN(x) (ADT7470_REG_PWM_MIN_BASE_ADDR + (x))
+#define ADT7470_REG_PWM_TMIN(x) (ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR + (x))
+#define ADT7470_REG_PWM_CFG(x) (ADT7470_REG_PWM_CFG_BASE_ADDR + ((x) / 2))
+#define ADT7470_REG_PWM_AUTO_TEMP(x) (ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR + \
+ ((x) / 2))
+
+#define ADT7470_VENDOR 0x41
+#define ADT7470_DEVICE 0x70
+/* datasheet only mentions a revision 2 */
+#define ADT7470_REVISION 0x02
+
+/* "all temps" according to hwmon sysfs interface spec */
+#define ADT7470_PWM_ALL_TEMPS 0x3FF
+
+/* How often do we reread sensors values? (In jiffies) */
+#define SENSOR_REFRESH_INTERVAL (5 * HZ)
+
+/* How often do we reread sensor limit values? (In jiffies) */
+#define LIMIT_REFRESH_INTERVAL (60 * HZ)
+
+/* sleep 1s while gathering temperature data */
+#define TEMP_COLLECTION_TIME 1000
+
+#define power_of_2(x) (((x) & ((x) - 1)) == 0)
+
+/* datasheet says to divide this number by the fan reading to get fan rpm */
+#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x))
+#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM
+#define FAN_PERIOD_INVALID 65535
+#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
+
+struct adt7470_data {
+ struct i2c_client client;
+ struct device *hwmon_dev;
+ struct attribute_group attrs;
+ struct mutex lock;
+ char sensors_valid;
+ char limits_valid;
+ unsigned long sensors_last_updated; /* In jiffies */
+ unsigned long limits_last_updated; /* In jiffies */
+
+ s8 temp[ADT7470_TEMP_COUNT];
+ s8 temp_min[ADT7470_TEMP_COUNT];
+ s8 temp_max[ADT7470_TEMP_COUNT];
+ u16 fan[ADT7470_FAN_COUNT];
+ u16 fan_min[ADT7470_FAN_COUNT];
+ u16 fan_max[ADT7470_FAN_COUNT];
+ u16 alarms, alarms_mask;
+ u8 force_pwm_max;
+ u8 pwm[ADT7470_PWM_COUNT];
+ u8 pwm_max[ADT7470_PWM_COUNT];
+ u8 pwm_automatic[ADT7470_PWM_COUNT];
+ u8 pwm_min[ADT7470_PWM_COUNT];
+ s8 pwm_tmin[ADT7470_PWM_COUNT];
+ u8 pwm_auto_temp[ADT7470_PWM_COUNT];
+};
+
+static int adt7470_attach_adapter(struct i2c_adapter *adapter);
+static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adt7470_detach_client(struct i2c_client *client);
+
+static struct i2c_driver adt7470_driver = {
+ .driver = {
+ .name = "adt7470",
+ },
+ .attach_adapter = adt7470_attach_adapter,
+ .detach_client = adt7470_detach_client,
+};
+
+/*
+ * 16-bit registers on the ADT7470 are low-byte first. The data sheet says
+ * that the low byte must be read before the high byte.
+ */
+static inline int adt7470_read_word_data(struct i2c_client *client, u8 reg)
+{
+ u16 foo;
+ foo = i2c_smbus_read_byte_data(client, reg);
+ foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
+ return foo;
+}
+
+static inline int adt7470_write_word_data(struct i2c_client *client, u8 reg,
+ u16 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
+ && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+}
+
+static void adt7470_init_client(struct i2c_client *client)
+{
+ int reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
+
+ if (reg < 0) {
+ dev_err(&client->dev, "cannot read configuration register\n");
+ } else {
+ /* start monitoring (and do a self-test) */
+ i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg | 3);
+ }
+}
+
+static struct adt7470_data *adt7470_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ unsigned long local_jiffies = jiffies;
+ u8 cfg;
+ int i;
+
+ mutex_lock(&data->lock);
+ if (time_before(local_jiffies, data->sensors_last_updated +
+ SENSOR_REFRESH_INTERVAL)
+ && data->sensors_valid)
+ goto no_sensor_update;
+
+ /* start reading temperature sensors */
+ cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
+ cfg |= 0x80;
+ i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg);
+
+ /*
+ * Delay is 200ms * number of tmp05 sensors. Too bad
+ * there's no way to figure out how many are connected.
+ * For now, assume 1s will work.
+ */
+ msleep(TEMP_COLLECTION_TIME);
+
+ /* done reading temperature sensors */
+ cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
+ cfg &= ~0x80;
+ i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg);
+
+ for (i = 0; i < ADT7470_TEMP_COUNT; i++)
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ ADT7470_TEMP_REG(i));
+
+ for (i = 0; i < ADT7470_FAN_COUNT; i++)
+ data->fan[i] = adt7470_read_word_data(client,
+ ADT7470_REG_FAN(i));
+
+ for (i = 0; i < ADT7470_PWM_COUNT; i++) {
+ int reg;
+ int reg_mask;
+
+ data->pwm[i] = i2c_smbus_read_byte_data(client,
+ ADT7470_REG_PWM(i));
+
+ if (i % 2)
+ reg_mask = ADT7470_PWM2_AUTO_MASK;
+ else
+ reg_mask = ADT7470_PWM1_AUTO_MASK;
+
+ reg = ADT7470_REG_PWM_CFG(i);
+ if (i2c_smbus_read_byte_data(client, reg) & reg_mask)
+ data->pwm_automatic[i] = 1;
+ else
+ data->pwm_automatic[i] = 0;
+
+ reg = ADT7470_REG_PWM_AUTO_TEMP(i);
+ cfg = i2c_smbus_read_byte_data(client, reg);
+ if (!(i % 2))
+ data->pwm_auto_temp[i] = cfg >> 4;
+ else
+ data->pwm_auto_temp[i] = cfg & 0xF;
+ }
+
+ if (i2c_smbus_read_byte_data(client, ADT7470_REG_CFG) &
+ ADT7470_FSPD_MASK)
+ data->force_pwm_max = 1;
+ else
+ data->force_pwm_max = 0;
+
+ data->alarms = adt7470_read_word_data(client, ADT7470_REG_ALARM1);
+ data->alarms_mask = adt7470_read_word_data(client,
+ ADT7470_REG_ALARM1_MASK);
+
+ data->sensors_last_updated = local_jiffies;
+ data->sensors_valid = 1;
+
+no_sensor_update:
+ if (time_before(local_jiffies, data->limits_last_updated +
+ LIMIT_REFRESH_INTERVAL)
+ && data->limits_valid)
+ goto out;
+
+ for (i = 0; i < ADT7470_TEMP_COUNT; i++) {
+ data->temp_min[i] = i2c_smbus_read_byte_data(client,
+ ADT7470_TEMP_MIN_REG(i));
+ data->temp_max[i] = i2c_smbus_read_byte_data(client,
+ ADT7470_TEMP_MAX_REG(i));
+ }
+
+ for (i = 0; i < ADT7470_FAN_COUNT; i++) {
+ data->fan_min[i] = adt7470_read_word_data(client,
+ ADT7470_REG_FAN_MIN(i));
+ data->fan_max[i] = adt7470_read_word_data(client,
+ ADT7470_REG_FAN_MAX(i));
+ }
+
+ for (i = 0; i < ADT7470_PWM_COUNT; i++) {
+ data->pwm_max[i] = i2c_smbus_read_byte_data(client,
+ ADT7470_REG_PWM_MAX(i));
+ data->pwm_min[i] = i2c_smbus_read_byte_data(client,
+ ADT7470_REG_PWM_MIN(i));
+ data->pwm_tmin[i] = i2c_smbus_read_byte_data(client,
+ ADT7470_REG_PWM_TMIN(i));
+ }
+
+ data->limits_last_updated = local_jiffies;
+ data->limits_valid = 1;
+
+out:
+ mutex_unlock(&data->lock);
+ return data;
+}
+
+static ssize_t show_temp_min(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", 1000 * data->temp_min[attr->index]);
+}
+
+static ssize_t set_temp_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10) / 1000;
+
+ mutex_lock(&data->lock);
+ data->temp_min[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7470_TEMP_MIN_REG(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", 1000 * data->temp_max[attr->index]);
+}
+
+static ssize_t set_temp_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10) / 1000;
+
+ mutex_lock(&data->lock);
+ data->temp_max[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7470_TEMP_MAX_REG(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", 1000 * data->temp[attr->index]);
+}
+
+static ssize_t show_alarms(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+
+ if (attr->index)
+ return sprintf(buf, "%x\n", data->alarms);
+ else
+ return sprintf(buf, "%x\n", data->alarms_mask);
+}
+
+static ssize_t show_fan_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+
+ if (FAN_DATA_VALID(data->fan_max[attr->index]))
+ return sprintf(buf, "%d\n",
+ FAN_PERIOD_TO_RPM(data->fan_max[attr->index]));
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t set_fan_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10);
+
+ if (!temp)
+ return -EINVAL;
+ temp = FAN_RPM_TO_PERIOD(temp);
+
+ mutex_lock(&data->lock);
+ data->fan_max[attr->index] = temp;
+ adt7470_write_word_data(client, ADT7470_REG_FAN_MAX(attr->index), temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_fan_min(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+
+ if (FAN_DATA_VALID(data->fan_min[attr->index]))
+ return sprintf(buf, "%d\n",
+ FAN_PERIOD_TO_RPM(data->fan_min[attr->index]));
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t set_fan_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10);
+
+ if (!temp)
+ return -EINVAL;
+ temp = FAN_RPM_TO_PERIOD(temp);
+
+ mutex_lock(&data->lock);
+ data->fan_min[attr->index] = temp;
+ adt7470_write_word_data(client, ADT7470_REG_FAN_MIN(attr->index), temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+
+ if (FAN_DATA_VALID(data->fan[attr->index]))
+ return sprintf(buf, "%d\n",
+ FAN_PERIOD_TO_RPM(data->fan[attr->index]));
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_force_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", data->force_pwm_max);
+}
+
+static ssize_t set_force_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10);
+ u8 reg;
+
+ mutex_lock(&data->lock);
+ data->force_pwm_max = temp;
+ reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
+ if (temp)
+ reg |= ADT7470_FSPD_MASK;
+ else
+ reg &= ~ADT7470_FSPD_MASK;
+ i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm[attr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->lock);
+ data->pwm[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7470_REG_PWM(attr->index), temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_max[attr->index]);
+}
+
+static ssize_t set_pwm_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->lock);
+ data->pwm_max[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MAX(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_min(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
+}
+
+static ssize_t set_pwm_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->lock);
+ data->pwm_min[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MIN(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_tmax(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ /* the datasheet says that tmax = tmin + 20C */
+ return sprintf(buf, "%d\n", 1000 * (20 + data->pwm_tmin[attr->index]));
+}
+
+static ssize_t show_pwm_tmin(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", 1000 * data->pwm_tmin[attr->index]);
+}
+
+static ssize_t set_pwm_tmin(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10) / 1000;
+
+ mutex_lock(&data->lock);
+ data->pwm_tmin[attr->index] = temp;
+ i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_TMIN(attr->index),
+ temp);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_auto(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ return sprintf(buf, "%d\n", 1 + data->pwm_automatic[attr->index]);
+}
+
+static ssize_t set_pwm_auto(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = simple_strtol(buf, NULL, 10);
+ int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index);
+ int pwm_auto_reg_mask;
+ u8 reg;
+
+ if (attr->index % 2)
+ pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
+ else
+ pwm_auto_reg_mask = ADT7470_PWM1_AUTO_MASK;
+
+ if (temp != 2 && temp != 1)
+ return -EINVAL;
+ temp--;
+
+ mutex_lock(&data->lock);
+ data->pwm_automatic[attr->index] = temp;
+ reg = i2c_smbus_read_byte_data(client, pwm_auto_reg);
+ if (temp)
+ reg |= pwm_auto_reg_mask;
+ else
+ reg &= ~pwm_auto_reg_mask;
+ i2c_smbus_write_byte_data(client, pwm_auto_reg, reg);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_auto_temp(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adt7470_data *data = adt7470_update_device(dev);
+ u8 ctrl = data->pwm_auto_temp[attr->index];
+
+ if (ctrl)
+ return sprintf(buf, "%d\n", 1 << (ctrl - 1));
+ else
+ return sprintf(buf, "%d\n", ADT7470_PWM_ALL_TEMPS);
+}
+
+static int cvt_auto_temp(int input)
+{
+ if (input == ADT7470_PWM_ALL_TEMPS)
+ return 0;
+ if (input < 1 || !power_of_2(input))
+ return -EINVAL;
+ return ilog2(input) + 1;
+}
+
+static ssize_t set_pwm_auto_temp(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7470_data *data = i2c_get_clientdata(client);
+ int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10));
+ int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index);
+ u8 reg;
+
+ if (temp < 0)
+ return temp;
+
+ mutex_lock(&data->lock);
+ data->pwm_automatic[attr->index] = temp;
+ reg = i2c_smbus_read_byte_data(client, pwm_auto_reg);
+
+ if (!(attr->index % 2)) {
+ reg &= 0xF;
+ reg |= (temp << 4) & 0xF0;
+ } else {
+ reg &= 0xF0;
+ reg |= temp & 0xF;
+ }
+
+ i2c_smbus_write_byte_data(client, pwm_auto_reg, reg);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL, 0);
+static SENSOR_DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarms, NULL, 1);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 2);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 3);
+static SENSOR_DEVICE_ATTR(temp5_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 4);
+static SENSOR_DEVICE_ATTR(temp6_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 5);
+static SENSOR_DEVICE_ATTR(temp7_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 6);
+static SENSOR_DEVICE_ATTR(temp8_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 7);
+static SENSOR_DEVICE_ATTR(temp9_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 8);
+static SENSOR_DEVICE_ATTR(temp10_max, S_IWUSR | S_IRUGO, show_temp_max,
+ set_temp_max, 9);
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 2);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 3);
+static SENSOR_DEVICE_ATTR(temp5_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 4);
+static SENSOR_DEVICE_ATTR(temp6_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 5);
+static SENSOR_DEVICE_ATTR(temp7_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 6);
+static SENSOR_DEVICE_ATTR(temp8_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 7);
+static SENSOR_DEVICE_ATTR(temp9_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 8);
+static SENSOR_DEVICE_ATTR(temp10_min, S_IWUSR | S_IRUGO, show_temp_min,
+ set_temp_min, 9);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO, show_temp, NULL, 9);
+
+static SENSOR_DEVICE_ATTR(fan1_max, S_IWUSR | S_IRUGO, show_fan_max,
+ set_fan_max, 0);
+static SENSOR_DEVICE_ATTR(fan2_max, S_IWUSR | S_IRUGO, show_fan_max,
+ set_fan_max, 1);
+static SENSOR_DEVICE_ATTR(fan3_max, S_IWUSR | S_IRUGO, show_fan_max,
+ set_fan_max, 2);
+static SENSOR_DEVICE_ATTR(fan4_max, S_IWUSR | S_IRUGO, show_fan_max,
+ set_fan_max, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
+ set_fan_min, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO,
+ show_force_pwm_max, set_force_pwm_max, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_min, set_pwm_min, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_pwm_max, set_pwm_max, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_pwm_tmin, set_pwm_tmin, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO, show_pwm_tmax,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point2_temp, S_IRUGO, show_pwm_tmax,
+ NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point2_temp, S_IRUGO, show_pwm_tmax,
+ NULL, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point2_temp, S_IRUGO, show_pwm_tmax,
+ NULL, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 2);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+ set_pwm_auto, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO,
+ show_pwm_auto_temp, set_pwm_auto_temp, 3);
+
+static struct attribute *adt7470_attr[] =
+{
+ &sensor_dev_attr_alarms.dev_attr.attr,
+ &sensor_dev_attr_alarm_mask.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp6_max.dev_attr.attr,
+ &sensor_dev_attr_temp7_max.dev_attr.attr,
+ &sensor_dev_attr_temp8_max.dev_attr.attr,
+ &sensor_dev_attr_temp9_max.dev_attr.attr,
+ &sensor_dev_attr_temp10_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+ &sensor_dev_attr_temp5_min.dev_attr.attr,
+ &sensor_dev_attr_temp6_min.dev_attr.attr,
+ &sensor_dev_attr_temp7_min.dev_attr.attr,
+ &sensor_dev_attr_temp8_min.dev_attr.attr,
+ &sensor_dev_attr_temp9_min.dev_attr.attr,
+ &sensor_dev_attr_temp10_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp6_input.dev_attr.attr,
+ &sensor_dev_attr_temp7_input.dev_attr.attr,
+ &sensor_dev_attr_temp8_input.dev_attr.attr,
+ &sensor_dev_attr_temp9_input.dev_attr.attr,
+ &sensor_dev_attr_temp10_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_max.dev_attr.attr,
+ &sensor_dev_attr_fan2_max.dev_attr.attr,
+ &sensor_dev_attr_fan3_max.dev_attr.attr,
+ &sensor_dev_attr_fan4_max.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_force_pwm_max.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm4.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm4_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr,
+ NULL
+};
+
+static int adt7470_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, adt7470_detect);
+}
+
+static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct adt7470_data *data;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ goto exit;
+
+ if (!(data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ client = &data->client;
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &adt7470_driver;
+
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ if (kind <= 0) {
+ int vendor, device, revision;
+
+ vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
+ if (vendor != ADT7470_VENDOR) {
+ err = -ENODEV;
+ goto exit_free;
+ }
+
+ device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
+ if (device != ADT7470_DEVICE) {
+ err = -ENODEV;
+ goto exit_free;
+ }
+
+ revision = i2c_smbus_read_byte_data(client,
+ ADT7470_REG_REVISION);
+ if (revision != ADT7470_REVISION) {
+ err = -ENODEV;
+ goto exit_free;
+ }
+ } else
+ dev_dbg(&adapter->dev, "detection forced\n");
+
+ strlcpy(client->name, "adt7470", I2C_NAME_SIZE);
+
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ dev_info(&client->dev, "%s chip found\n", client->name);
+
+ /* Initialize the ADT7470 chip */
+ adt7470_init_client(client);
+
+ /* Register sysfs hooks */
+ data->attrs.attrs = adt7470_attr;
+ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
+ goto exit_detach;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
+exit_detach:
+ i2c_detach_client(client);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int adt7470_detach_client(struct i2c_client *client)
+{
+ struct adt7470_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
+ i2c_detach_client(client);
+ kfree(data);
+ return 0;
+}
+
+static int __init adt7470_init(void)
+{
+ return i2c_add_driver(&adt7470_driver);
+}
+
+static void __exit adt7470_exit(void)
+{
+ i2c_del_driver(&adt7470_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ADT7470 driver");
+MODULE_LICENSE("GPL");
+
+module_init(adt7470_init);
+module_exit(adt7470_exit);
static s16 rest_y;
static struct timer_list applesmc_timer;
static struct input_dev *applesmc_idev;
-static struct class_device *hwmon_class_dev;
+static struct device *hwmon_dev;
/* Indicates whether this computer has an accelerometer. */
static unsigned int applesmc_accelerometer;
goto out_light_wq;
}
- hwmon_class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(hwmon_class_dev)) {
- ret = PTR_ERR(hwmon_class_dev);
+ hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon_dev)) {
+ ret = PTR_ERR(hwmon_dev);
goto out_light_ledclass;
}
static void __exit applesmc_exit(void)
{
- hwmon_device_unregister(hwmon_class_dev);
+ hwmon_device_unregister(hwmon_dev);
if (applesmc_light) {
led_classdev_unregister(&applesmc_backlight);
destroy_workqueue(applesmc_led_wq);
/* TEMP: 0.001C/bit (-128C to +127C)
REG: 1C/bit, two's complement */
-static u8 TEMP_TO_REG(int temp)
+static u8 TEMP_TO_REG(long temp)
{
int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
ntemp += (ntemp<0 ? -500 : 500);
dynamically allocated, at the same time the client itself is allocated. */
struct asb100_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
enum chips type;
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct asb100_data *data = i2c_get_clientdata(client); \
- unsigned long val = simple_strtoul(buf, NULL, 10); \
+ long val = simple_strtol(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
switch (nr) { \
/* VRM */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct asb100_data *data = asb100_update_device(dev);
+ struct asb100_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", data->vrm);
}
if ((err = sysfs_create_group(&new_client->dev.kobj, &asb100_group)))
goto ERROR3;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR4;
}
/* main client */
if (data) {
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &asb100_group);
}
struct atxp1_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
unsigned long last_updated;
u8 valid;
if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct atxp1_data * data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &atxp1_group);
err = i2c_detach_client(client);
static struct coretemp_data *coretemp_update_device(struct device *dev);
struct coretemp_data {
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
const char *name;
u32 id;
u8 alarm;
};
-static struct coretemp_data *coretemp_update_device(struct device *dev);
-
/*
* Sysfs stuff
*/
if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group)))
goto exit_free;
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
dev_err(&pdev->dev, "Class registration failed (%d)\n",
err);
goto exit_class;
{
struct coretemp_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &coretemp_group);
platform_set_drvdata(pdev, NULL);
kfree(data);
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata coretemp_cpu_notifier = {
+static struct notifier_block coretemp_cpu_notifier = {
.notifier_call = coretemp_cpu_callback,
};
#endif /* !CONFIG_HOTPLUG_CPU */
for_each_online_cpu(i) {
struct cpuinfo_x86 *c = &(cpu_data)[i];
- /* check if family 6, models e, f */
+ /* check if family 6, models e, f, 16 */
if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
- !((c->x86_model == 0xe) || (c->x86_model == 0xf))) {
+ !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
+ (c->x86_model == 0x16))) {
/* supported CPU not found, but report the unknown
family 6 CPU */
/*
- * dme1737.c - driver for the SMSC DME1737 and Asus A8000 Super-I/O chips
- * integrated hardware monitoring features.
+ * dme1737.c - Driver for the SMSC DME1737, Asus A8000, and SMSC SCH311x
+ * Super-I/O chips integrated hardware monitoring features.
* Copyright (c) 2007 Juerg Haefliger <juergh@gmail.com>
*
- * This driver is based on the LM85 driver. The hardware monitoring
- * capabilities of the DME1737 are very similar to the LM85 with some
- * additional features. Even though the DME1737 is a Super-I/O chip, the
- * hardware monitoring registers are only accessible via SMBus.
+ * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access
+ * the chip registers if a DME1737 (or A8000) is found and the ISA bus if a
+ * SCH311x chip is found. Both types of chips have very similar hardware
+ * monitoring capabilities but differ in the way they can be accessed.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/mutex.h>
#include <asm/io.h>
+/* ISA device, if found */
+static struct platform_device *pdev;
+
/* Module load parameters */
static int force_start;
module_param(force_start, bool, 0);
static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
/* Miscellaneous registers */
+#define DME1737_REG_DEVICE 0x3d
#define DME1737_REG_COMPANY 0x3e
#define DME1737_REG_VERSTEP 0x3f
#define DME1737_REG_CONFIG 0x40
#define DME1737_COMPANY_SMSC 0x5c
#define DME1737_VERSTEP 0x88
#define DME1737_VERSTEP_MASK 0xf8
+#define SCH311X_DEVICE 0x8c
+
+/* Length of ISA address segment */
+#define DME1737_EXTENT 2
/* ---------------------------------------------------------------------
* Data structures and manipulation thereof
* --------------------------------------------------------------------- */
+/* For ISA chips, we abuse the i2c_client addr and name fields. We also use
+ the driver field to differentiate between I2C and ISA chips. */
struct dme1737_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
int valid; /* !=0 if following fields are valid */
/* ---------------------------------------------------------------------
* Device I/O access
+ *
+ * ISA access is performed through an index/data register pair and needs to
+ * be protected by a mutex during runtime (not required for initialization).
+ * We use data->update_lock for this and need to ensure that we acquire it
+ * before calling dme1737_read or dme1737_write.
* --------------------------------------------------------------------- */
static u8 dme1737_read(struct i2c_client *client, u8 reg)
{
- s32 val = i2c_smbus_read_byte_data(client, reg);
+ s32 val;
+
+ if (client->driver) { /* I2C device */
+ val = i2c_smbus_read_byte_data(client, reg);
- if (val < 0) {
- dev_warn(&client->dev, "Read from register 0x%02x failed! "
- "Please report to the driver maintainer.\n", reg);
+ if (val < 0) {
+ dev_warn(&client->dev, "Read from register "
+ "0x%02x failed! Please report to the driver "
+ "maintainer.\n", reg);
+ }
+ } else { /* ISA device */
+ outb(reg, client->addr);
+ val = inb(client->addr + 1);
}
return val;
}
-static s32 dme1737_write(struct i2c_client *client, u8 reg, u8 value)
+static s32 dme1737_write(struct i2c_client *client, u8 reg, u8 val)
{
- s32 res = i2c_smbus_write_byte_data(client, reg, value);
+ s32 res = 0;
+
+ if (client->driver) { /* I2C device */
+ res = i2c_smbus_write_byte_data(client, reg, val);
- if (res < 0) {
- dev_warn(&client->dev, "Write to register 0x%02x failed! "
- "Please report to the driver maintainer.\n", reg);
+ if (res < 0) {
+ dev_warn(&client->dev, "Write to register "
+ "0x%02x failed! Please report to the driver "
+ "maintainer.\n", reg);
+ }
+ } else { /* ISA device */
+ outb(reg, client->addr);
+ outb(val, client->addr + 1);
}
return res;
static struct dme1737_data *dme1737_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
int ix;
u8 lsb[5];
DME1737_REG_ALARM3) << 16;
}
+ /* The ISA chips require explicit clearing of alarm bits.
+ * Don't worry, an alarm will come back if the condition
+ * that causes it still exists */
+ if (!client->driver) {
+ if (data->alarms & 0xff0000) {
+ dme1737_write(client, DME1737_REG_ALARM3,
+ 0xff);
+ }
+ if (data->alarms & 0xff00) {
+ dme1737_write(client, DME1737_REG_ALARM2,
+ 0xff);
+ }
+ if (data->alarms & 0xff) {
+ dme1737_write(client, DME1737_REG_ALARM1,
+ 0xff);
+ }
+ }
+
data->last_update = jiffies;
data->valid = 1;
}
break;
default:
res = 0;
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
return sprintf(buf, "%d\n", res);
static ssize_t set_in(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
struct sensor_device_attribute_2
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
int ix = sensor_attr_2->index;
data->in_max[ix]);
break;
default:
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
mutex_unlock(&data->update_lock);
break;
default:
res = 0;
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
return sprintf(buf, "%d\n", res);
static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
struct sensor_device_attribute_2
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
int ix = sensor_attr_2->index;
data->temp_offset[ix]);
break;
default:
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
mutex_unlock(&data->update_lock);
break;
default:
res = 0;
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
return sprintf(buf, "%d\n", res);
static ssize_t set_zone(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
struct sensor_device_attribute_2
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
int ix = sensor_attr_2->index;
data->zone_abs[ix]);
break;
default:
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
mutex_unlock(&data->update_lock);
break;
default:
res = 0;
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
return sprintf(buf, "%d\n", res);
static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
struct sensor_device_attribute_2
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
int ix = sensor_attr_2->index;
/* Only valid for fan[1-4] */
if (!(val == 1 || val == 2 || val == 4)) {
count = -EINVAL;
- dev_warn(&client->dev, "Fan type value %ld not "
+ dev_warn(dev, "Fan type value %ld not "
"supported. Choose one of 1, 2, or 4.\n",
val);
goto exit;
data->fan_opt[ix]);
break;
default:
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
exit:
mutex_unlock(&data->update_lock);
break;
default:
res = 0;
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
return sprintf(buf, "%d\n", res);
}
static struct attribute *dme1737_attr_pwm[];
-static void dme1737_chmod_file(struct i2c_client*, struct attribute*, mode_t);
+static void dme1737_chmod_file(struct device*, struct attribute*, mode_t);
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
struct sensor_device_attribute_2
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
int ix = sensor_attr_2->index;
/* Only valid for pwm[1-3] */
if (val < 0 || val > 2) {
count = -EINVAL;
- dev_warn(&client->dev, "PWM enable %ld not "
+ dev_warn(dev, "PWM enable %ld not "
"supported. Choose one of 0, 1, or 2.\n",
val);
goto exit;
switch (val) {
case 0:
/* Change permissions of pwm[ix] to read-only */
- dme1737_chmod_file(client, dme1737_attr_pwm[ix],
+ dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
S_IRUGO);
/* Turn fan fully on */
data->pwm_config[ix] = PWM_EN_TO_REG(0,
dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
data->pwm_config[ix]);
/* Change permissions of pwm[ix] to read-writeable */
- dme1737_chmod_file(client, dme1737_attr_pwm[ix],
+ dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
S_IRUGO | S_IWUSR);
break;
case 2:
/* Change permissions of pwm[ix] to read-only */
- dme1737_chmod_file(client, dme1737_attr_pwm[ix],
+ dme1737_chmod_file(dev, dme1737_attr_pwm[ix],
S_IRUGO);
/* Turn on auto mode using the saved zone channel
* assignment */
if (!(val == 1 || val == 2 || val == 4 ||
val == 6 || val == 7)) {
count = -EINVAL;
- dev_warn(&client->dev, "PWM auto channels zone %ld "
+ dev_warn(dev, "PWM auto channels zone %ld "
"not supported. Choose one of 1, 2, 4, 6, "
"or 7.\n", val);
goto exit;
data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix,
dme1737_read(client,
DME1737_REG_PWM_RR(0)));
-
} else {
data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix,
dme1737_read(client,
DME1737_REG_PWM_RR(0)));
-
}
dme1737_write(client, DME1737_REG_PWM_RR(0),
data->pwm_rr[0]);
data->pwm_min[ix]);
break;
default:
- dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
+ dev_dbg(dev, "Unknown function %d.\n", fn);
}
exit:
mutex_unlock(&data->update_lock);
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
data->vrm = val;
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dme1737_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->client.name);
+}
+
/* ---------------------------------------------------------------------
* Sysfs device attribute defines and structs
* --------------------------------------------------------------------- */
#define SENSOR_DEVICE_ATTR_IN(ix) \
static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
- show_in, NULL, SYS_IN_INPUT, ix); \
+ show_in, NULL, SYS_IN_INPUT, ix); \
static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \
- show_in, set_in, SYS_IN_MIN, ix); \
+ show_in, set_in, SYS_IN_MIN, ix); \
static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \
- show_in, set_in, SYS_IN_MAX, ix); \
+ show_in, set_in, SYS_IN_MAX, ix); \
static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \
- show_in, NULL, SYS_IN_ALARM, ix)
+ show_in, NULL, SYS_IN_ALARM, ix)
SENSOR_DEVICE_ATTR_IN(0);
SENSOR_DEVICE_ATTR_IN(1);
#define SENSOR_DEVICE_ATTR_TEMP(ix) \
static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \
- show_temp, NULL, SYS_TEMP_INPUT, ix-1); \
+ show_temp, NULL, SYS_TEMP_INPUT, ix-1); \
static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \
- show_temp, set_temp, SYS_TEMP_MIN, ix-1); \
+ show_temp, set_temp, SYS_TEMP_MIN, ix-1); \
static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \
- show_temp, set_temp, SYS_TEMP_MAX, ix-1); \
+ show_temp, set_temp, SYS_TEMP_MAX, ix-1); \
static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \
- show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \
+ show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \
static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \
- show_temp, NULL, SYS_TEMP_ALARM, ix-1); \
+ show_temp, NULL, SYS_TEMP_ALARM, ix-1); \
static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \
- show_temp, NULL, SYS_TEMP_FAULT, ix-1)
+ show_temp, NULL, SYS_TEMP_FAULT, ix-1)
SENSOR_DEVICE_ATTR_TEMP(1);
SENSOR_DEVICE_ATTR_TEMP(2);
#define SENSOR_DEVICE_ATTR_ZONE(ix) \
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \
- show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \
+ show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \
- show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \
- show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \
- show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \
- show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1)
+ show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1)
SENSOR_DEVICE_ATTR_ZONE(1);
SENSOR_DEVICE_ATTR_ZONE(2);
#define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \
static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
- show_fan, NULL, SYS_FAN_INPUT, ix-1); \
+ show_fan, NULL, SYS_FAN_INPUT, ix-1); \
static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
- show_fan, set_fan, SYS_FAN_MIN, ix-1); \
+ show_fan, set_fan, SYS_FAN_MIN, ix-1); \
static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
- show_fan, NULL, SYS_FAN_ALARM, ix-1); \
+ show_fan, NULL, SYS_FAN_ALARM, ix-1); \
static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \
- show_fan, set_fan, SYS_FAN_TYPE, ix-1)
+ show_fan, set_fan, SYS_FAN_TYPE, ix-1)
SENSOR_DEVICE_ATTR_FAN_1TO4(1);
SENSOR_DEVICE_ATTR_FAN_1TO4(2);
#define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \
static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
- show_fan, NULL, SYS_FAN_INPUT, ix-1); \
+ show_fan, NULL, SYS_FAN_INPUT, ix-1); \
static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
- show_fan, set_fan, SYS_FAN_MIN, ix-1); \
+ show_fan, set_fan, SYS_FAN_MIN, ix-1); \
static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
- show_fan, NULL, SYS_FAN_ALARM, ix-1); \
+ show_fan, NULL, SYS_FAN_ALARM, ix-1); \
static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \
- show_fan, set_fan, SYS_FAN_MAX, ix-1)
+ show_fan, set_fan, SYS_FAN_MAX, ix-1)
SENSOR_DEVICE_ATTR_FAN_5TO6(5);
SENSOR_DEVICE_ATTR_FAN_5TO6(6);
#define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \
static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
- show_pwm, set_pwm, SYS_PWM, ix-1); \
+ show_pwm, set_pwm, SYS_PWM, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
- show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
+ show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
- show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \
+ show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \
- show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \
+ show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \
- show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \
+ show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \
- show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \
+ show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \
- show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \
+ show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \
- show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1)
+ show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1)
SENSOR_DEVICE_ATTR_PWM_1TO3(1);
SENSOR_DEVICE_ATTR_PWM_1TO3(2);
#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \
- show_pwm, set_pwm, SYS_PWM, ix-1); \
+ show_pwm, set_pwm, SYS_PWM, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
- show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
+ show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
- show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
+ show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
SENSOR_DEVICE_ATTR_PWM_5TO6(5);
SENSOR_DEVICE_ATTR_PWM_5TO6(6);
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); /* for ISA devices */
#define SENSOR_DEV_ATTR_IN(ix) \
&sensor_dev_attr_in##ix##_input.dev_attr.attr, \
* permissions are created read-only and write permissions are added or removed
* on the fly when required */
static struct attribute *dme1737_attr[] ={
- /* Voltages */
- SENSOR_DEV_ATTR_IN(0),
- SENSOR_DEV_ATTR_IN(1),
- SENSOR_DEV_ATTR_IN(2),
- SENSOR_DEV_ATTR_IN(3),
- SENSOR_DEV_ATTR_IN(4),
- SENSOR_DEV_ATTR_IN(5),
- SENSOR_DEV_ATTR_IN(6),
- /* Temperatures */
- SENSOR_DEV_ATTR_TEMP(1),
- SENSOR_DEV_ATTR_TEMP(2),
- SENSOR_DEV_ATTR_TEMP(3),
- /* Zones */
- SENSOR_DEV_ATTR_ZONE(1),
- SENSOR_DEV_ATTR_ZONE(2),
- SENSOR_DEV_ATTR_ZONE(3),
- /* Misc */
- &dev_attr_vrm.attr,
- &dev_attr_cpu0_vid.attr,
+ /* Voltages */
+ SENSOR_DEV_ATTR_IN(0),
+ SENSOR_DEV_ATTR_IN(1),
+ SENSOR_DEV_ATTR_IN(2),
+ SENSOR_DEV_ATTR_IN(3),
+ SENSOR_DEV_ATTR_IN(4),
+ SENSOR_DEV_ATTR_IN(5),
+ SENSOR_DEV_ATTR_IN(6),
+ /* Temperatures */
+ SENSOR_DEV_ATTR_TEMP(1),
+ SENSOR_DEV_ATTR_TEMP(2),
+ SENSOR_DEV_ATTR_TEMP(3),
+ /* Zones */
+ SENSOR_DEV_ATTR_ZONE(1),
+ SENSOR_DEV_ATTR_ZONE(2),
+ SENSOR_DEV_ATTR_ZONE(3),
+ /* Misc */
+ &dev_attr_vrm.attr,
+ &dev_attr_cpu0_vid.attr,
NULL
};
static const struct attribute_group dme1737_group = {
- .attrs = dme1737_attr,
+ .attrs = dme1737_attr,
};
/* The following structs hold the PWM attributes, some of which are optional.
* Their creation depends on the chip configuration which is determined during
* module load. */
static struct attribute *dme1737_attr_pwm1[] = {
- SENSOR_DEV_ATTR_PWM_1TO3(1),
+ SENSOR_DEV_ATTR_PWM_1TO3(1),
NULL
};
static struct attribute *dme1737_attr_pwm2[] = {
- SENSOR_DEV_ATTR_PWM_1TO3(2),
+ SENSOR_DEV_ATTR_PWM_1TO3(2),
NULL
};
static struct attribute *dme1737_attr_pwm3[] = {
- SENSOR_DEV_ATTR_PWM_1TO3(3),
+ SENSOR_DEV_ATTR_PWM_1TO3(3),
NULL
};
static struct attribute *dme1737_attr_pwm5[] = {
- SENSOR_DEV_ATTR_PWM_5TO6(5),
+ SENSOR_DEV_ATTR_PWM_5TO6(5),
NULL
};
static struct attribute *dme1737_attr_pwm6[] = {
- SENSOR_DEV_ATTR_PWM_5TO6(6),
+ SENSOR_DEV_ATTR_PWM_5TO6(6),
NULL
};
* Their creation depends on the chip configuration which is determined during
* module load. */
static struct attribute *dme1737_attr_fan1[] = {
- SENSOR_DEV_ATTR_FAN_1TO4(1),
+ SENSOR_DEV_ATTR_FAN_1TO4(1),
NULL
};
static struct attribute *dme1737_attr_fan2[] = {
- SENSOR_DEV_ATTR_FAN_1TO4(2),
+ SENSOR_DEV_ATTR_FAN_1TO4(2),
NULL
};
static struct attribute *dme1737_attr_fan3[] = {
- SENSOR_DEV_ATTR_FAN_1TO4(3),
+ SENSOR_DEV_ATTR_FAN_1TO4(3),
NULL
};
static struct attribute *dme1737_attr_fan4[] = {
- SENSOR_DEV_ATTR_FAN_1TO4(4),
+ SENSOR_DEV_ATTR_FAN_1TO4(4),
NULL
};
static struct attribute *dme1737_attr_fan5[] = {
- SENSOR_DEV_ATTR_FAN_5TO6(5),
+ SENSOR_DEV_ATTR_FAN_5TO6(5),
NULL
};
static struct attribute *dme1737_attr_fan6[] = {
- SENSOR_DEV_ATTR_FAN_5TO6(6),
+ SENSOR_DEV_ATTR_FAN_5TO6(6),
NULL
};
* writeable if the chip is *not* locked and the respective PWM is available.
* Otherwise they stay read-only. */
static struct attribute *dme1737_attr_pwm1_lock[] = {
- SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
+ SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
NULL
};
static struct attribute *dme1737_attr_pwm2_lock[] = {
- SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
+ SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
NULL
};
static struct attribute *dme1737_attr_pwm3_lock[] = {
- SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
+ SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
NULL
};
static struct attribute *dme1737_attr_pwm5_lock[] = {
- SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
+ SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
NULL
};
static struct attribute *dme1737_attr_pwm6_lock[] = {
- SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
+ SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
NULL
};
* Super-IO functions
* --------------------------------------------------------------------- */
+static inline void dme1737_sio_enter(int sio_cip)
+{
+ outb(0x55, sio_cip);
+}
+
+static inline void dme1737_sio_exit(int sio_cip)
+{
+ outb(0xaa, sio_cip);
+}
+
static inline int dme1737_sio_inb(int sio_cip, int reg)
{
outb(reg, sio_cip);
outb(val, sio_cip + 1);
}
-static int dme1737_sio_get_features(int sio_cip, struct i2c_client *client)
+/* ---------------------------------------------------------------------
+ * Device initialization
+ * --------------------------------------------------------------------- */
+
+static int dme1737_i2c_get_features(int, struct dme1737_data*);
+
+static void dme1737_chmod_file(struct device *dev,
+ struct attribute *attr, mode_t mode)
{
- struct dme1737_data *data = i2c_get_clientdata(client);
- int err = 0, reg;
- u16 addr;
+ if (sysfs_chmod_file(&dev->kobj, attr, mode)) {
+ dev_warn(dev, "Failed to change permissions of %s.\n",
+ attr->name);
+ }
+}
- /* Enter configuration mode */
- outb(0x55, sio_cip);
+static void dme1737_chmod_group(struct device *dev,
+ const struct attribute_group *group,
+ mode_t mode)
+{
+ struct attribute **attr;
- /* Check device ID
- * The DME1737 can return either 0x78 or 0x77 as its device ID. */
- reg = dme1737_sio_inb(sio_cip, 0x20);
- if (!(reg == 0x77 || reg == 0x78)) {
- err = -ENODEV;
- goto exit;
+ for (attr = group->attrs; *attr; attr++) {
+ dme1737_chmod_file(dev, *attr, mode);
}
+}
- /* Select logical device A (runtime registers) */
- dme1737_sio_outb(sio_cip, 0x07, 0x0a);
+static void dme1737_remove_files(struct device *dev)
+{
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ int ix;
- /* Get the base address of the runtime registers */
- if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
- dme1737_sio_inb(sio_cip, 0x61))) {
- err = -ENODEV;
- goto exit;
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
+ if (data->has_fan & (1 << ix)) {
+ sysfs_remove_group(&dev->kobj,
+ &dme1737_fan_group[ix]);
+ }
}
- /* Read the runtime registers to determine which optional features
- * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
- * to '10' if the respective feature is enabled. */
- if ((inb(addr + 0x43) & 0x0c) == 0x08) { /* fan6 */
- data->has_fan |= (1 << 5);
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
+ if (data->has_pwm & (1 << ix)) {
+ sysfs_remove_group(&dev->kobj,
+ &dme1737_pwm_group[ix]);
+ }
}
- if ((inb(addr + 0x44) & 0x0c) == 0x08) { /* pwm6 */
- data->has_pwm |= (1 << 5);
+
+ sysfs_remove_group(&dev->kobj, &dme1737_group);
+
+ if (!data->client.driver) {
+ sysfs_remove_file(&dev->kobj, &dev_attr_name.attr);
}
- if ((inb(addr + 0x45) & 0x0c) == 0x08) { /* fan5 */
- data->has_fan |= (1 << 4);
+}
+
+static int dme1737_create_files(struct device *dev)
+{
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ int err, ix;
+
+ /* Create a name attribute for ISA devices */
+ if (!data->client.driver &&
+ (err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr))) {
+ goto exit;
}
- if ((inb(addr + 0x46) & 0x0c) == 0x08) { /* pwm5 */
- data->has_pwm |= (1 << 4);
+
+ /* Create standard sysfs attributes */
+ if ((err = sysfs_create_group(&dev->kobj, &dme1737_group))) {
+ goto exit_remove;
}
-exit:
- /* Exit configuration mode */
- outb(0xaa, sio_cip);
+ /* Create fan sysfs attributes */
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
+ if (data->has_fan & (1 << ix)) {
+ if ((err = sysfs_create_group(&dev->kobj,
+ &dme1737_fan_group[ix]))) {
+ goto exit_remove;
+ }
+ }
+ }
- return err;
-}
+ /* Create PWM sysfs attributes */
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
+ if (data->has_pwm & (1 << ix)) {
+ if ((err = sysfs_create_group(&dev->kobj,
+ &dme1737_pwm_group[ix]))) {
+ goto exit_remove;
+ }
+ }
+ }
-/* ---------------------------------------------------------------------
- * Device detection, registration and initialization
- * --------------------------------------------------------------------- */
+ /* Inform if the device is locked. Otherwise change the permissions of
+ * selected attributes from read-only to read-writeable. */
+ if (data->config & 0x02) {
+ dev_info(dev, "Device is locked. Some attributes "
+ "will be read-only.\n");
+ } else {
+ /* Change permissions of standard attributes */
+ dme1737_chmod_group(dev, &dme1737_lock_group,
+ S_IRUGO | S_IWUSR);
-static struct i2c_driver dme1737_driver;
+ /* Change permissions of PWM attributes */
+ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) {
+ if (data->has_pwm & (1 << ix)) {
+ dme1737_chmod_group(dev,
+ &dme1737_pwm_lock_group[ix],
+ S_IRUGO | S_IWUSR);
+ }
+ }
-static void dme1737_chmod_file(struct i2c_client *client,
- struct attribute *attr, mode_t mode)
-{
- if (sysfs_chmod_file(&client->dev.kobj, attr, mode)) {
- dev_warn(&client->dev, "Failed to change permissions of %s.\n",
- attr->name);
+ /* Change permissions of pwm[1-3] if in manual mode */
+ for (ix = 0; ix < 3; ix++) {
+ if ((data->has_pwm & (1 << ix)) &&
+ (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
+ dme1737_chmod_file(dev,
+ dme1737_attr_pwm[ix],
+ S_IRUGO | S_IWUSR);
+ }
+ }
}
-}
-static void dme1737_chmod_group(struct i2c_client *client,
- const struct attribute_group *group,
- mode_t mode)
-{
- struct attribute **attr;
+ return 0;
- for (attr = group->attrs; *attr; attr++) {
- dme1737_chmod_file(client, *attr, mode);
- }
+exit_remove:
+ dme1737_remove_files(dev);
+exit:
+ return err;
}
-static int dme1737_init_client(struct i2c_client *client)
+static int dme1737_init_device(struct device *dev)
{
- struct dme1737_data *data = i2c_get_clientdata(client);
+ struct dme1737_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
int ix;
u8 reg;
- data->config = dme1737_read(client, DME1737_REG_CONFIG);
- /* Inform if part is not monitoring/started */
- if (!(data->config & 0x01)) {
- if (!force_start) {
- dev_err(&client->dev, "Device is not monitoring. "
- "Use the force_start load parameter to "
- "override.\n");
- return -EFAULT;
- }
-
- /* Force monitoring */
- data->config |= 0x01;
- dme1737_write(client, DME1737_REG_CONFIG, data->config);
- }
+ data->config = dme1737_read(client, DME1737_REG_CONFIG);
+ /* Inform if part is not monitoring/started */
+ if (!(data->config & 0x01)) {
+ if (!force_start) {
+ dev_err(dev, "Device is not monitoring. "
+ "Use the force_start load parameter to "
+ "override.\n");
+ return -EFAULT;
+ }
+
+ /* Force monitoring */
+ data->config |= 0x01;
+ dme1737_write(client, DME1737_REG_CONFIG, data->config);
+ }
/* Inform if part is not ready */
if (!(data->config & 0x04)) {
- dev_err(&client->dev, "Device is not ready.\n");
+ dev_err(dev, "Device is not ready.\n");
return -EFAULT;
}
- data->config2 = dme1737_read(client, DME1737_REG_CONFIG2);
- /* Check if optional fan3 input is enabled */
- if (data->config2 & 0x04) {
- data->has_fan |= (1 << 2);
- }
+ /* Determine which optional fan and pwm features are enabled/present */
+ if (client->driver) { /* I2C chip */
+ data->config2 = dme1737_read(client, DME1737_REG_CONFIG2);
+ /* Check if optional fan3 input is enabled */
+ if (data->config2 & 0x04) {
+ data->has_fan |= (1 << 2);
+ }
- /* Fan4 and pwm3 are only available if the client's I2C address
- * is the default 0x2e. Otherwise the I/Os associated with these
- * functions are used for addr enable/select. */
- if (client->addr == 0x2e) {
- data->has_fan |= (1 << 3);
- data->has_pwm |= (1 << 2);
- }
+ /* Fan4 and pwm3 are only available if the client's I2C address
+ * is the default 0x2e. Otherwise the I/Os associated with
+ * these functions are used for addr enable/select. */
+ if (data->client.addr == 0x2e) {
+ data->has_fan |= (1 << 3);
+ data->has_pwm |= (1 << 2);
+ }
- /* Determine if the optional fan[5-6] and/or pwm[5-6] are enabled.
- * For this, we need to query the runtime registers through the
- * Super-IO LPC interface. Try both config ports 0x2e and 0x4e. */
- if (dme1737_sio_get_features(0x2e, client) &&
- dme1737_sio_get_features(0x4e, client)) {
- dev_warn(&client->dev, "Failed to query Super-IO for optional "
- "features.\n");
+ /* Determine which of the optional fan[5-6] and pwm[5-6]
+ * features are enabled. For this, we need to query the runtime
+ * registers through the Super-IO LPC interface. Try both
+ * config ports 0x2e and 0x4e. */
+ if (dme1737_i2c_get_features(0x2e, data) &&
+ dme1737_i2c_get_features(0x4e, data)) {
+ dev_warn(dev, "Failed to query Super-IO for optional "
+ "features.\n");
+ }
+ } else { /* ISA chip */
+ /* Fan3 and pwm3 are always available. Fan[4-5] and pwm[5-6]
+ * don't exist in the ISA chip. */
+ data->has_fan |= (1 << 2);
+ data->has_pwm |= (1 << 2);
}
/* Fan1, fan2, pwm1, and pwm2 are always present */
data->has_fan |= 0x03;
data->has_pwm |= 0x03;
- dev_info(&client->dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, "
+ dev_info(dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, "
"fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
(data->has_pwm & (1 << 2)) ? "yes" : "no",
(data->has_pwm & (1 << 4)) ? "yes" : "no",
reg = dme1737_read(client, DME1737_REG_TACH_PWM);
/* Inform if fan-to-pwm mapping differs from the default */
- if (reg != 0xa4) {
- dev_warn(&client->dev, "Non-standard fan to pwm mapping: "
+ if (client->driver && reg != 0xa4) { /* I2C chip */
+ dev_warn(dev, "Non-standard fan to pwm mapping: "
"fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, "
"fan4->pwm%d. Please report to the driver "
"maintainer.\n",
(reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1);
+ } else if (!client->driver && reg != 0x24) { /* ISA chip */
+ dev_warn(dev, "Non-standard fan to pwm mapping: "
+ "fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. "
+ "Please report to the driver maintainer.\n",
+ (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
+ ((reg >> 4) & 0x03) + 1);
}
/* Switch pwm[1-3] to manual mode if they are currently disabled and
DME1737_REG_PWM_CONFIG(ix));
if ((data->has_pwm & (1 << ix)) &&
(PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
- dev_info(&client->dev, "Switching pwm%d to "
+ dev_info(dev, "Switching pwm%d to "
"manual mode.\n", ix + 1);
data->pwm_config[ix] = PWM_EN_TO_REG(1,
data->pwm_config[ix]);
return 0;
}
-static int dme1737_detect(struct i2c_adapter *adapter, int address,
- int kind)
+/* ---------------------------------------------------------------------
+ * I2C device detection and registration
+ * --------------------------------------------------------------------- */
+
+static struct i2c_driver dme1737_i2c_driver;
+
+static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
+{
+ int err = 0, reg;
+ u16 addr;
+
+ dme1737_sio_enter(sio_cip);
+
+ /* Check device ID
+ * The DME1737 can return either 0x78 or 0x77 as its device ID. */
+ reg = dme1737_sio_inb(sio_cip, 0x20);
+ if (!(reg == 0x77 || reg == 0x78)) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* Select logical device A (runtime registers) */
+ dme1737_sio_outb(sio_cip, 0x07, 0x0a);
+
+ /* Get the base address of the runtime registers */
+ if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+ dme1737_sio_inb(sio_cip, 0x61))) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* Read the runtime registers to determine which optional features
+ * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
+ * to '10' if the respective feature is enabled. */
+ if ((inb(addr + 0x43) & 0x0c) == 0x08) { /* fan6 */
+ data->has_fan |= (1 << 5);
+ }
+ if ((inb(addr + 0x44) & 0x0c) == 0x08) { /* pwm6 */
+ data->has_pwm |= (1 << 5);
+ }
+ if ((inb(addr + 0x45) & 0x0c) == 0x08) { /* fan5 */
+ data->has_fan |= (1 << 4);
+ }
+ if ((inb(addr + 0x46) & 0x0c) == 0x08) { /* pwm5 */
+ data->has_pwm |= (1 << 4);
+ }
+
+exit:
+ dme1737_sio_exit(sio_cip);
+
+ return err;
+}
+
+static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address,
+ int kind)
{
u8 company, verstep = 0;
struct i2c_client *client;
struct dme1737_data *data;
- int ix, err = 0;
+ struct device *dev;
+ int err = 0;
const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
i2c_set_clientdata(client, data);
client->addr = address;
client->adapter = adapter;
- client->driver = &dme1737_driver;
+ client->driver = &dme1737_i2c_driver;
+ dev = &client->dev;
/* A negative kind means that the driver was loaded with no force
* parameter (default), so we must identify the chip. */
goto exit_kfree;
}
+ dev_info(dev, "Found a DME1737 chip at 0x%02x (rev 0x%02x).\n",
+ client->addr, verstep);
+
/* Initialize the DME1737 chip */
- if ((err = dme1737_init_client(client))) {
+ if ((err = dme1737_init_device(dev))) {
+ dev_err(dev, "Failed to initialize device.\n");
goto exit_detach;
}
- /* Create standard sysfs attributes */
- if ((err = sysfs_create_group(&client->dev.kobj, &dme1737_group))) {
- goto exit_detach;
- }
-
- /* Create fan sysfs attributes */
- for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
- if (data->has_fan & (1 << ix)) {
- if ((err = sysfs_create_group(&client->dev.kobj,
- &dme1737_fan_group[ix]))) {
- goto exit_remove;
- }
- }
- }
-
- /* Create PWM sysfs attributes */
- for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
- if (data->has_pwm & (1 << ix)) {
- if ((err = sysfs_create_group(&client->dev.kobj,
- &dme1737_pwm_group[ix]))) {
- goto exit_remove;
- }
- }
- }
-
- /* Inform if the device is locked. Otherwise change the permissions of
- * selected attributes from read-only to read-writeable. */
- if (data->config & 0x02) {
- dev_info(&client->dev, "Device is locked. Some attributes "
- "will be read-only.\n");
- } else {
- /* Change permissions of standard attributes */
- dme1737_chmod_group(client, &dme1737_lock_group,
- S_IRUGO | S_IWUSR);
-
- /* Change permissions of PWM attributes */
- for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) {
- if (data->has_pwm & (1 << ix)) {
- dme1737_chmod_group(client,
- &dme1737_pwm_lock_group[ix],
- S_IRUGO | S_IWUSR);
- }
- }
-
- /* Change permissions of pwm[1-3] if in manual mode */
- for (ix = 0; ix < 3; ix++) {
- if ((data->has_pwm & (1 << ix)) &&
- (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
- dme1737_chmod_file(client,
- dme1737_attr_pwm[ix],
- S_IRUGO | S_IWUSR);
- }
- }
+ /* Create sysfs files */
+ if ((err = dme1737_create_files(dev))) {
+ dev_err(dev, "Failed to create sysfs files.\n");
+ goto exit_detach;
}
/* Register device */
- data->class_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(dev, "Failed to register device.\n");
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
- dev_info(&adapter->dev, "Found a DME1737 chip at 0x%02x "
- "(rev 0x%02x)\n", client->addr, verstep);
-
return 0;
exit_remove:
- for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
- if (data->has_fan & (1 << ix)) {
- sysfs_remove_group(&client->dev.kobj,
- &dme1737_fan_group[ix]);
- }
- }
- for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
- if (data->has_pwm & (1 << ix)) {
- sysfs_remove_group(&client->dev.kobj,
- &dme1737_pwm_group[ix]);
- }
- }
- sysfs_remove_group(&client->dev.kobj, &dme1737_group);
+ dme1737_remove_files(dev);
exit_detach:
i2c_detach_client(client);
exit_kfree:
return err;
}
-static int dme1737_attach_adapter(struct i2c_adapter *adapter)
+static int dme1737_i2c_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON)) {
return 0;
}
- return i2c_probe(adapter, &addr_data, dme1737_detect);
+ return i2c_probe(adapter, &addr_data, dme1737_i2c_detect);
}
-static int dme1737_detach_client(struct i2c_client *client)
+static int dme1737_i2c_detach_client(struct i2c_client *client)
{
struct dme1737_data *data = i2c_get_clientdata(client);
- int ix, err;
+ int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
+ dme1737_remove_files(&client->dev);
- for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
- if (data->has_fan & (1 << ix)) {
- sysfs_remove_group(&client->dev.kobj,
- &dme1737_fan_group[ix]);
- }
+ if ((err = i2c_detach_client(client))) {
+ return err;
}
- for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
- if (data->has_pwm & (1 << ix)) {
- sysfs_remove_group(&client->dev.kobj,
- &dme1737_pwm_group[ix]);
- }
+
+ kfree(data);
+ return 0;
+}
+
+static struct i2c_driver dme1737_i2c_driver = {
+ .driver = {
+ .name = "dme1737",
+ },
+ .attach_adapter = dme1737_i2c_attach_adapter,
+ .detach_client = dme1737_i2c_detach_client,
+};
+
+/* ---------------------------------------------------------------------
+ * ISA device detection and registration
+ * --------------------------------------------------------------------- */
+
+static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr)
+{
+ int err = 0, reg;
+ unsigned short base_addr;
+
+ dme1737_sio_enter(sio_cip);
+
+ /* Check device ID
+ * We currently know about SCH3112 (0x7c), SCH3114 (0x7d), and
+ * SCH3116 (0x7f). */
+ reg = dme1737_sio_inb(sio_cip, 0x20);
+ if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) {
+ err = -ENODEV;
+ goto exit;
}
- sysfs_remove_group(&client->dev.kobj, &dme1737_group);
- if ((err = i2c_detach_client(client))) {
- return err;
+ /* Select logical device A (runtime registers) */
+ dme1737_sio_outb(sio_cip, 0x07, 0x0a);
+
+ /* Get the base address of the runtime registers */
+ if (!(base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+ dme1737_sio_inb(sio_cip, 0x61))) {
+ printk(KERN_ERR "dme1737: Base address not set.\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* Access to the hwmon registers is through an index/data register
+ * pair located at offset 0x70/0x71. */
+ *addr = base_addr + 0x70;
+
+exit:
+ dme1737_sio_exit(sio_cip);
+ return err;
+}
+
+static int __init dme1737_isa_device_add(unsigned short addr)
+{
+ struct resource res = {
+ .start = addr,
+ .end = addr + DME1737_EXTENT - 1,
+ .name = "dme1737",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ if (!(pdev = platform_device_alloc("dme1737", addr))) {
+ printk(KERN_ERR "dme1737: Failed to allocate device.\n");
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ if ((err = platform_device_add_resources(pdev, &res, 1))) {
+ printk(KERN_ERR "dme1737: Failed to add device resource "
+ "(err = %d).\n", err);
+ goto exit_device_put;
+ }
+
+ if ((err = platform_device_add(pdev))) {
+ printk(KERN_ERR "dme1737: Failed to add device (err = %d).\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+ pdev = NULL;
+exit:
+ return err;
+}
+
+static int __devinit dme1737_isa_probe(struct platform_device *pdev)
+{
+ u8 company, device;
+ struct resource *res;
+ struct i2c_client *client;
+ struct dme1737_data *data;
+ struct device *dev = &pdev->dev;
+ int err;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, DME1737_EXTENT, "dme1737")) {
+ dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
+ (unsigned short)res->start,
+ (unsigned short)res->start + DME1737_EXTENT - 1);
+ err = -EBUSY;
+ goto exit;
+ }
+
+ if (!(data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit_release_region;
+ }
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = res->start;
+ platform_set_drvdata(pdev, data);
+
+ company = dme1737_read(client, DME1737_REG_COMPANY);
+ device = dme1737_read(client, DME1737_REG_DEVICE);
+
+ if (!((company == DME1737_COMPANY_SMSC) &&
+ (device == SCH311X_DEVICE))) {
+ err = -ENODEV;
+ goto exit_kfree;
+ }
+
+ /* Fill in the remaining client fields and initialize the mutex */
+ strlcpy(client->name, "sch311x", I2C_NAME_SIZE);
+ mutex_init(&data->update_lock);
+
+ dev_info(dev, "Found a SCH311x chip at 0x%04x\n", client->addr);
+
+ /* Initialize the chip */
+ if ((err = dme1737_init_device(dev))) {
+ dev_err(dev, "Failed to initialize device.\n");
+ goto exit_kfree;
}
+ /* Create sysfs files */
+ if ((err = dme1737_create_files(dev))) {
+ dev_err(dev, "Failed to create sysfs files.\n");
+ goto exit_kfree;
+ }
+
+ /* Register device */
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(dev, "Failed to register device.\n");
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+exit_remove_files:
+ dme1737_remove_files(dev);
+exit_kfree:
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+exit_release_region:
+ release_region(res->start, DME1737_EXTENT);
+exit:
+ return err;
+}
+
+static int __devexit dme1737_isa_remove(struct platform_device *pdev)
+{
+ struct dme1737_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ dme1737_remove_files(&pdev->dev);
+ release_region(data->client.addr, DME1737_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
+
return 0;
}
-static struct i2c_driver dme1737_driver = {
+static struct platform_driver dme1737_isa_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "dme1737",
},
- .attach_adapter = dme1737_attach_adapter,
- .detach_client = dme1737_detach_client,
+ .probe = dme1737_isa_probe,
+ .remove = __devexit_p(dme1737_isa_remove),
};
+/* ---------------------------------------------------------------------
+ * Module initialization and cleanup
+ * --------------------------------------------------------------------- */
+
static int __init dme1737_init(void)
{
- return i2c_add_driver(&dme1737_driver);
+ int err;
+ unsigned short addr;
+
+ if ((err = i2c_add_driver(&dme1737_i2c_driver))) {
+ goto exit;
+ }
+
+ if (dme1737_isa_detect(0x2e, &addr) &&
+ dme1737_isa_detect(0x4e, &addr)) {
+ /* Return 0 if we didn't find an ISA device */
+ return 0;
+ }
+
+ if ((err = platform_driver_register(&dme1737_isa_driver))) {
+ goto exit_del_i2c_driver;
+ }
+
+ /* Sets global pdev as a side effect */
+ if ((err = dme1737_isa_device_add(addr))) {
+ goto exit_del_isa_driver;
+ }
+
+ return 0;
+
+exit_del_isa_driver:
+ platform_driver_unregister(&dme1737_isa_driver);
+exit_del_i2c_driver:
+ i2c_del_driver(&dme1737_i2c_driver);
+exit:
+ return err;
}
static void __exit dme1737_exit(void)
{
- i2c_del_driver(&dme1737_driver);
+ if (pdev) {
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&dme1737_isa_driver);
+ }
+
+ i2c_del_driver(&dme1737_i2c_driver);
}
MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
/* Each client has this additional data */
struct ds1621_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct i2c_client *client = to_i2c_client(dev);
struct ds1621_data *data = ds1621_update_client(dev);
- u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10));
+ u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10));
mutex_lock(&data->update_lock);
data->temp[attr->index] = val;
if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct ds1621_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &ds1621_group);
if ((err = i2c_detach_client(client)))
* The F71872F/FG is almost the same, with two more voltages monitored,
* and 6 VID inputs.
*
+ * The F71806F/FG is essentially the same as the F71872F/FG. It even has
+ * the same chip ID, so the driver can't differentiate between.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
struct f71805f_data {
unsigned short addr;
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
}
}
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
goto exit_remove_files;
}
struct resource *res;
int i;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
for (i = 0; i < 4; i++)
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
static const char *names[] = {
"F71805F/FG",
- "F71872F/FG",
+ "F71872F/FG or F71806F/FG",
};
superio_enter(sioaddr);
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> *
+ * Copyright (C) 2007 by Hans de Goede <j.w.r.degoede@hhs.nl> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <asm/io.h>
+
+#define DRVNAME "f71882fg"
+
+#define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device*/
+#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
+#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_DEVREV 0x22 /* Device revision */
+#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+
+#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
+#define SIO_F71882_ID 0x0541 /* Chipset ID */
+
+#define REGION_LENGTH 8
+#define ADDR_REG_OFFSET 5
+#define DATA_REG_OFFSET 6
+
+#define F71882FG_REG_PECI 0x0A
+
+#define F71882FG_REG_IN_STATUS 0x12
+#define F71882FG_REG_IN_BEEP 0x13
+#define F71882FG_REG_IN(nr) (0x20 + (nr))
+#define F71882FG_REG_IN1_HIGH 0x32
+
+#define F71882FG_REG_FAN(nr) (0xA0 + (16 * (nr)))
+#define F71882FG_REG_FAN_STATUS 0x92
+#define F71882FG_REG_FAN_BEEP 0x93
+
+#define F71882FG_REG_TEMP(nr) (0x72 + 2 * (nr))
+#define F71882FG_REG_TEMP_OVT(nr) (0x82 + 2 * (nr))
+#define F71882FG_REG_TEMP_HIGH(nr) (0x83 + 2 * (nr))
+#define F71882FG_REG_TEMP_STATUS 0x62
+#define F71882FG_REG_TEMP_BEEP 0x63
+#define F71882FG_REG_TEMP_HYST1 0x6C
+#define F71882FG_REG_TEMP_HYST23 0x6D
+#define F71882FG_REG_TEMP_TYPE 0x6B
+#define F71882FG_REG_TEMP_DIODE_OPEN 0x6F
+
+#define F71882FG_REG_START 0x01
+
+#define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */
+
+static struct platform_device *f71882fg_pdev = NULL;
+
+/* Super-I/O Function prototypes */
+static inline int superio_inb(int base, int reg);
+static inline int superio_inw(int base, int reg);
+static inline void superio_enter(int base);
+static inline void superio_select(int base, int ld);
+static inline void superio_exit(int base);
+
+static inline u16 fan_from_reg ( u16 reg );
+
+struct f71882fg_data {
+ unsigned short addr;
+ struct device *hwmon_dev;
+
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ unsigned long last_limits; /* In jiffies */
+
+ /* Register Values */
+ u8 in[9];
+ u8 in1_max;
+ u8 in_status;
+ u8 in_beep;
+ u16 fan[4];
+ u8 fan_status;
+ u8 fan_beep;
+ u8 temp[3];
+ u8 temp_ovt[3];
+ u8 temp_high[3];
+ u8 temp_hyst[3];
+ u8 temp_type[3];
+ u8 temp_status;
+ u8 temp_beep;
+ u8 temp_diode_open;
+};
+
+static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg);
+static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg);
+static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val);
+
+/* Sysfs in*/
+static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
+ char *buf);
+static ssize_t show_in_max(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t store_in_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count);
+static ssize_t show_in_beep(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t store_in_beep(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count);
+static ssize_t show_in_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+/* Sysfs Fan */
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+ char *buf);
+static ssize_t show_fan_beep(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t store_fan_beep(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count);
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+/* Sysfs Temp */
+static ssize_t show_temp(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t show_temp_max(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t store_temp_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count);
+static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count);
+static ssize_t show_temp_crit(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t store_temp_crit(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count);
+static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t show_temp_type(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t show_temp_beep(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t store_temp_beep(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count);
+static ssize_t show_temp_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+static ssize_t show_temp_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf);
+/* Sysfs misc */
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf);
+
+static int __devinit f71882fg_probe(struct platform_device * pdev);
+static int __devexit f71882fg_remove(struct platform_device *pdev);
+static int __init f71882fg_init(void);
+static int __init f71882fg_find(int sioaddr, unsigned short *address);
+static int __init f71882fg_device_add(unsigned short address);
+static void __exit f71882fg_exit(void);
+
+static struct platform_driver f71882fg_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = f71882fg_probe,
+ .remove = __devexit_p(f71882fg_remove),
+};
+
+static struct device_attribute f71882fg_dev_attr[] =
+{
+ __ATTR( name, S_IRUGO, show_name, NULL ),
+};
+
+static struct sensor_device_attribute f71882fg_in_temp_attr[] =
+{
+ SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
+ SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
+ SENSOR_ATTR(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max, 1),
+ SENSOR_ATTR(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep, 1),
+ SENSOR_ATTR(in1_alarm, S_IRUGO, show_in_alarm, NULL, 1),
+ SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
+ SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
+ SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
+ SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
+ SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
+ SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
+ SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
+ SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0),
+ SENSOR_ATTR(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
+ store_temp_max, 0),
+ SENSOR_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 0),
+ SENSOR_ATTR(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+ store_temp_crit, 0),
+ SENSOR_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 0),
+ SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0),
+ SENSOR_ATTR(temp1_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+ store_temp_beep, 0),
+ SENSOR_ATTR(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0),
+ SENSOR_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0),
+ SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1),
+ SENSOR_ATTR(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
+ store_temp_max, 1),
+ SENSOR_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 1),
+ SENSOR_ATTR(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+ store_temp_crit, 1),
+ SENSOR_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 1),
+ SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1),
+ SENSOR_ATTR(temp2_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+ store_temp_beep, 1),
+ SENSOR_ATTR(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 1),
+ SENSOR_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1),
+ SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2),
+ SENSOR_ATTR(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
+ store_temp_max, 2),
+ SENSOR_ATTR(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 2),
+ SENSOR_ATTR(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+ store_temp_crit, 2),
+ SENSOR_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 2),
+ SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2),
+ SENSOR_ATTR(temp3_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+ store_temp_beep, 2),
+ SENSOR_ATTR(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 2),
+ SENSOR_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2)
+};
+
+static struct sensor_device_attribute f71882fg_fan_attr[] =
+{
+ SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
+ SENSOR_ATTR(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 0),
+ SENSOR_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0),
+ SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
+ SENSOR_ATTR(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 1),
+ SENSOR_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1),
+ SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
+ SENSOR_ATTR(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 2),
+ SENSOR_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2),
+ SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3),
+ SENSOR_ATTR(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 3),
+ SENSOR_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3)
+};
+
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+ int val;
+ outb(reg++, base);
+ val = inb(base + 1) << 8;
+ outb(reg, base);
+ val |= inb(base + 1);
+ return val;
+}
+
+static inline void superio_enter(int base)
+{
+ /* according to the datasheet the key must be send twice! */
+ outb( SIO_UNLOCK_KEY, base);
+ outb( SIO_UNLOCK_KEY, base);
+}
+
+static inline void superio_select( int base, int ld)
+{
+ outb(SIO_REG_LDSEL, base);
+ outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+ outb(SIO_LOCK_KEY, base);
+}
+
+static inline u16 fan_from_reg(u16 reg)
+{
+ return reg ? (1500000 / reg) : 0;
+}
+
+static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg)
+{
+ u8 val;
+
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ val = inb(data->addr + DATA_REG_OFFSET);
+
+ return val;
+}
+
+static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg)
+{
+ u16 val;
+
+ outb(reg++, data->addr + ADDR_REG_OFFSET);
+ val = inb(data->addr + DATA_REG_OFFSET) << 8;
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ val |= inb(data->addr + DATA_REG_OFFSET);
+
+ return val;
+}
+
+static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val)
+{
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ outb(val, data->addr + DATA_REG_OFFSET);
+}
+
+static struct f71882fg_data *f71882fg_update_device(struct device * dev)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int nr, reg, reg2;
+
+ mutex_lock(&data->update_lock);
+
+ /* Update once every 60 seconds */
+ if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
+ !data->valid) {
+ data->in1_max = f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
+ data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
+
+ /* Get High & boundary temps*/
+ for (nr = 0; nr < 3; nr++) {
+ data->temp_ovt[nr] = f71882fg_read8(data,
+ F71882FG_REG_TEMP_OVT(nr));
+ data->temp_high[nr] = f71882fg_read8(data,
+ F71882FG_REG_TEMP_HIGH(nr));
+ }
+
+ /* Have to hardcode hyst*/
+ data->temp_hyst[0] = f71882fg_read8(data,
+ F71882FG_REG_TEMP_HYST1) >> 4;
+ /* Hyst temps 2 & 3 stored in same register */
+ reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST23);
+ data->temp_hyst[1] = reg & 0x0F;
+ data->temp_hyst[2] = reg >> 4;
+
+ /* Have to hardcode type, because temp1 is special */
+ reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
+ reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
+ if ((reg2 & 0x03) == 0x01)
+ data->temp_type[0] = 6 /* PECI */;
+ else if ((reg2 & 0x03) == 0x02)
+ data->temp_type[0] = 5 /* AMDSI */;
+ else
+ data->temp_type[0] = (reg & 0x02) ? 2 : 4;
+
+ data->temp_type[1] = (reg & 0x04) ? 2 : 4;
+ data->temp_type[2] = (reg & 0x08) ? 2 : 4;
+
+ data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP);
+
+ data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP);
+
+ data->last_limits = jiffies;
+ }
+
+ /* Update every second */
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+ data->temp_status = f71882fg_read8(data,
+ F71882FG_REG_TEMP_STATUS);
+ data->temp_diode_open = f71882fg_read8(data,
+ F71882FG_REG_TEMP_DIODE_OPEN);
+ for (nr = 0; nr < 3; nr++)
+ data->temp[nr] = f71882fg_read8(data,
+ F71882FG_REG_TEMP(nr));
+
+ data->fan_status = f71882fg_read8(data,
+ F71882FG_REG_FAN_STATUS);
+ for (nr = 0; nr < 4; nr++)
+ data->fan[nr] = f71882fg_read16(data,
+ F71882FG_REG_FAN(nr));
+
+ data->in_status = f71882fg_read8(data,
+ F71882FG_REG_IN_STATUS);
+ for (nr = 0; nr < 9; nr++)
+ data->in[nr] = f71882fg_read8(data,
+ F71882FG_REG_IN(nr));
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+/* Sysfs Interface */
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int speed = fan_from_reg(data->fan[nr]);
+
+ if (speed == FAN_MIN_DETECT)
+ speed = 0;
+
+ return sprintf(buf, "%d\n", speed);
+}
+
+static ssize_t show_fan_beep(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ if (data->fan_beep & (1 << nr))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t store_fan_beep(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ if (val)
+ data->fan_beep |= 1 << nr;
+ else
+ data->fan_beep &= ~(1 << nr);
+
+ f71882fg_write8(data, F71882FG_REG_FAN_BEEP, data->fan_beep);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ if (data->fan_status & (1 << nr))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->in[nr] * 8);
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+
+ return sprintf(buf, "%d\n", data->in1_max * 8);
+}
+
+static ssize_t store_in_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int val = simple_strtoul(buf, NULL, 10) / 8;
+
+ if (val > 255)
+ val = 255;
+
+ mutex_lock(&data->update_lock);
+ f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val);
+ data->in1_max = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_in_beep(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ if (data->in_beep & (1 << nr))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t store_in_beep(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ if (val)
+ data->in_beep |= 1 << nr;
+ else
+ data->in_beep &= ~(1 << nr);
+
+ f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_in_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ if (data->in_status & (1 << nr))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->temp[nr] * 1000);
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->temp_high[nr] * 1000);
+}
+
+static ssize_t store_temp_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int val = simple_strtoul(buf, NULL, 10) / 1000;
+
+ if (val > 255)
+ val = 255;
+
+ mutex_lock(&data->update_lock);
+ f71882fg_write8(data, F71882FG_REG_TEMP_HIGH(nr), val);
+ data->temp_high[nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n",
+ (data->temp_high[nr] - data->temp_hyst[nr]) * 1000);
+}
+
+static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int val = simple_strtoul(buf, NULL, 10) / 1000;
+ ssize_t ret = count;
+
+ mutex_lock(&data->update_lock);
+
+ /* convert abs to relative and check */
+ val = data->temp_high[nr] - val;
+ if (val < 0 || val > 15) {
+ ret = -EINVAL;
+ goto store_temp_max_hyst_exit;
+ }
+
+ data->temp_hyst[nr] = val;
+
+ /* convert value to register contents */
+ switch (nr) {
+ case 0:
+ val = val << 4;
+ break;
+ case 1:
+ val = val | (data->temp_hyst[2] << 4);
+ break;
+ case 2:
+ val = data->temp_hyst[1] | (val << 4);
+ break;
+ }
+
+ f71882fg_write8(data, nr ? F71882FG_REG_TEMP_HYST23 :
+ F71882FG_REG_TEMP_HYST1, val);
+
+store_temp_max_hyst_exit:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+static ssize_t show_temp_crit(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->temp_ovt[nr] * 1000);
+}
+
+static ssize_t store_temp_crit(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int val = simple_strtoul(buf, NULL, 10) / 1000;
+
+ if (val > 255)
+ val = 255;
+
+ mutex_lock(&data->update_lock);
+ f71882fg_write8(data, F71882FG_REG_TEMP_OVT(nr), val);
+ data->temp_ovt[nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n",
+ (data->temp_ovt[nr] - data->temp_hyst[nr]) * 1000);
+}
+
+static ssize_t show_temp_type(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->temp_type[nr]);
+}
+
+static ssize_t show_temp_beep(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ if (data->temp_beep & (1 << (nr + 1)))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t store_temp_beep(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+ int val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ if (val)
+ data->temp_beep |= 1 << (nr + 1);
+ else
+ data->temp_beep &= ~(1 << (nr + 1));
+
+ f71882fg_write8(data, F71882FG_REG_TEMP_BEEP, data->temp_beep);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_temp_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ if (data->temp_status & (1 << (nr + 1)))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_temp_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int nr = to_sensor_dev_attr(devattr)->index;
+
+ if (data->temp_diode_open & (1 << (nr + 1)))
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ return sprintf(buf, DRVNAME "\n");
+}
+
+
+static int __devinit f71882fg_probe(struct platform_device * pdev)
+{
+ struct f71882fg_data *data;
+ int err, i;
+ u8 start_reg;
+
+ if (!(data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL)))
+ return -ENOMEM;
+
+ data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
+ mutex_init(&data->update_lock);
+ platform_set_drvdata(pdev, data);
+
+ /* Register sysfs interface files */
+ for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) {
+ err = device_create_file(&pdev->dev, &f71882fg_dev_attr[i]);
+ if (err)
+ goto exit_unregister_sysfs;
+ }
+
+ start_reg = f71882fg_read8(data, F71882FG_REG_START);
+ if (start_reg & 0x01) {
+ for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) {
+ err = device_create_file(&pdev->dev,
+ &f71882fg_in_temp_attr[i].dev_attr);
+ if (err)
+ goto exit_unregister_sysfs;
+ }
+ }
+
+ if (start_reg & 0x02) {
+ for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) {
+ err = device_create_file(&pdev->dev,
+ &f71882fg_fan_attr[i].dev_attr);
+ if (err)
+ goto exit_unregister_sysfs;
+ }
+ }
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_unregister_sysfs;
+ }
+
+ return 0;
+
+exit_unregister_sysfs:
+ for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++)
+ device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]);
+
+ for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
+ device_remove_file(&pdev->dev,
+ &f71882fg_in_temp_attr[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
+ device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
+
+ kfree(data);
+
+ return err;
+}
+
+static int __devexit f71882fg_remove(struct platform_device *pdev)
+{
+ int i;
+ struct f71882fg_data *data = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++)
+ device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]);
+
+ for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
+ device_remove_file(&pdev->dev,
+ &f71882fg_in_temp_attr[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
+ device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
+
+ kfree(data);
+
+ return 0;
+}
+
+static int __init f71882fg_find(int sioaddr, unsigned short *address)
+{
+ int err = -ENODEV;
+ u16 devid;
+ u8 start_reg;
+ struct f71882fg_data data;
+
+ superio_enter(sioaddr);
+
+ devid = superio_inw(sioaddr, SIO_REG_MANID);
+ if (devid != SIO_FINTEK_ID) {
+ printk(KERN_INFO DRVNAME ": Not a Fintek device\n");
+ goto exit;
+ }
+
+ devid = superio_inw(sioaddr, SIO_REG_DEVID);
+ if (devid != SIO_F71882_ID) {
+ printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n");
+ goto exit;
+ }
+
+ superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+ if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+ printk(KERN_WARNING DRVNAME ": Device not activated\n");
+ goto exit;
+ }
+
+ *address = superio_inw(sioaddr, SIO_REG_ADDR);
+ if (*address == 0)
+ {
+ printk(KERN_WARNING DRVNAME ": Base address not set\n");
+ goto exit;
+ }
+ *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
+
+ data.addr = *address;
+ start_reg = f71882fg_read8(&data, F71882FG_REG_START);
+ if (!(start_reg & 0x03)) {
+ printk(KERN_WARNING DRVNAME
+ ": Hardware monitoring not activated\n");
+ goto exit;
+ }
+
+ err = 0;
+ printk(KERN_INFO DRVNAME ": Found F71882FG chip at %#x, revision %d\n",
+ (unsigned int)*address,
+ (int)superio_inb(sioaddr, SIO_REG_DEVREV));
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init f71882fg_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + REGION_LENGTH - 1,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ f71882fg_pdev = platform_device_alloc(DRVNAME, address);
+ if (!f71882fg_pdev)
+ return -ENOMEM;
+
+ res.name = f71882fg_pdev->name;
+ err = platform_device_add_resources(f71882fg_pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed\n");
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(f71882fg_pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed\n");
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(f71882fg_pdev);
+
+ return err;
+}
+
+static int __init f71882fg_init(void)
+{
+ int err = -ENODEV;
+ unsigned short address;
+
+ if (f71882fg_find(0x2e, &address) && f71882fg_find(0x4e, &address))
+ goto exit;
+
+ if ((err = platform_driver_register(&f71882fg_driver)))
+ goto exit;
+
+ if ((err = f71882fg_device_add(address)))
+ goto exit_driver;
+
+ return 0;
+
+exit_driver:
+ platform_driver_unregister(&f71882fg_driver);
+exit:
+ return err;
+}
+
+static void __exit f71882fg_exit(void)
+{
+ platform_device_unregister(f71882fg_pdev);
+ platform_driver_unregister(&f71882fg_driver);
+}
+
+MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver");
+MODULE_AUTHOR("Hans Edgington (hans@edgington.nl)");
+MODULE_LICENSE("GPL");
+
+module_init(f71882fg_init);
+module_exit(f71882fg_exit);
--- /dev/null
+/*
+ * f75375s.c - driver for the Fintek F75375/SP and F75373
+ * hardware monitoring features
+ * Copyright (C) 2006-2007 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * Datasheets available at:
+ *
+ * f75375:
+ * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
+ *
+ * f75373:
+ * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_2(f75373, f75375);
+
+/* Fintek F75375 registers */
+#define F75375_REG_CONFIG0 0x0
+#define F75375_REG_CONFIG1 0x1
+#define F75375_REG_CONFIG2 0x2
+#define F75375_REG_CONFIG3 0x3
+#define F75375_REG_ADDR 0x4
+#define F75375_REG_INTR 0x31
+#define F75375_CHIP_ID 0x5A
+#define F75375_REG_VERSION 0x5C
+#define F75375_REG_VENDOR 0x5D
+#define F75375_REG_FAN_TIMER 0x60
+
+#define F75375_REG_VOLT(nr) (0x10 + (nr))
+#define F75375_REG_VOLT_HIGH(nr) (0x20 + (nr) * 2)
+#define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2)
+
+#define F75375_REG_TEMP(nr) (0x14 + (nr))
+#define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2)
+#define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2)
+
+#define F75375_REG_FAN(nr) (0x16 + (nr) * 2)
+#define F75375_REG_FAN_MIN(nr) (0x2C + (nr) * 2)
+#define F75375_REG_FAN_FULL(nr) (0x70 + (nr) * 0x10)
+#define F75375_REG_FAN_PWM_DUTY(nr) (0x76 + (nr) * 0x10)
+#define F75375_REG_FAN_PWM_CLOCK(nr) (0x7D + (nr) * 0x10)
+
+#define F75375_REG_FAN_EXP(nr) (0x74 + (nr) * 0x10)
+#define F75375_REG_FAN_B_TEMP(nr, step) ((0xA0 + (nr) * 0x10) + (step))
+#define F75375_REG_FAN_B_SPEED(nr, step) \
+ ((0xA5 + (nr) * 0x10) + (step) * 2)
+
+#define F75375_REG_PWM1_RAISE_DUTY 0x69
+#define F75375_REG_PWM2_RAISE_DUTY 0x6A
+#define F75375_REG_PWM1_DROP_DUTY 0x6B
+#define F75375_REG_PWM2_DROP_DUTY 0x6C
+
+#define FAN_CTRL_LINEAR(nr) (4 + nr)
+#define FAN_CTRL_MODE(nr) (5 + ((nr) * 2))
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct f75375_data {
+ unsigned short addr;
+ struct i2c_client client;
+ struct device *hwmon_dev;
+
+ const char *name;
+ int kind;
+ struct mutex update_lock; /* protect register access */
+ char valid;
+ unsigned long last_updated; /* In jiffies */
+ unsigned long last_limits; /* In jiffies */
+
+ /* Register values */
+ u8 in[4];
+ u8 in_max[4];
+ u8 in_min[4];
+ u16 fan[2];
+ u16 fan_min[2];
+ u16 fan_full[2];
+ u16 fan_exp[2];
+ u8 fan_timer;
+ u8 pwm[2];
+ u8 pwm_mode[2];
+ u8 pwm_enable[2];
+ s8 temp[2];
+ s8 temp_high[2];
+ s8 temp_max_hyst[2];
+};
+
+static int f75375_attach_adapter(struct i2c_adapter *adapter);
+static int f75375_detect(struct i2c_adapter *adapter, int address, int kind);
+static int f75375_detach_client(struct i2c_client *client);
+
+static struct i2c_driver f75375_driver = {
+ .driver = {
+ .name = "f75375",
+ },
+ .attach_adapter = f75375_attach_adapter,
+ .detach_client = f75375_detach_client,
+};
+
+static inline int f75375_read8(struct i2c_client *client, u8 reg)
+{
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* in most cases, should be called while holding update_lock */
+static inline u16 f75375_read16(struct i2c_client *client, u8 reg)
+{
+ return ((i2c_smbus_read_byte_data(client, reg) << 8)
+ | i2c_smbus_read_byte_data(client, reg + 1));
+}
+
+static inline void f75375_write8(struct i2c_client *client, u8 reg,
+ u8 value)
+{
+ i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static inline void f75375_write16(struct i2c_client *client, u8 reg,
+ u16 value)
+{
+ int err = i2c_smbus_write_byte_data(client, reg, (value << 8));
+ if (err)
+ return;
+ i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
+}
+
+static struct f75375_data *f75375_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int nr;
+
+ mutex_lock(&data->update_lock);
+
+ /* Limit registers cache is refreshed after 60 seconds */
+ if (time_after(jiffies, data->last_limits + 60 * HZ)
+ || !data->valid) {
+ for (nr = 0; nr < 2; nr++) {
+ data->temp_high[nr] =
+ f75375_read8(client, F75375_REG_TEMP_HIGH(nr));
+ data->temp_max_hyst[nr] =
+ f75375_read8(client, F75375_REG_TEMP_HYST(nr));
+ data->fan_full[nr] =
+ f75375_read16(client, F75375_REG_FAN_FULL(nr));
+ data->fan_min[nr] =
+ f75375_read16(client, F75375_REG_FAN_MIN(nr));
+ data->fan_exp[nr] =
+ f75375_read16(client, F75375_REG_FAN_EXP(nr));
+ data->pwm[nr] = f75375_read8(client,
+ F75375_REG_FAN_PWM_DUTY(nr));
+
+ }
+ for (nr = 0; nr < 4; nr++) {
+ data->in_max[nr] =
+ f75375_read8(client, F75375_REG_VOLT_HIGH(nr));
+ data->in_min[nr] =
+ f75375_read8(client, F75375_REG_VOLT_LOW(nr));
+ }
+ data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER);
+ data->last_limits = jiffies;
+ }
+
+ /* Measurement registers cache is refreshed after 2 second */
+ if (time_after(jiffies, data->last_updated + 2 * HZ)
+ || !data->valid) {
+ for (nr = 0; nr < 2; nr++) {
+ data->temp[nr] =
+ f75375_read8(client, F75375_REG_TEMP(nr));
+ data->fan[nr] =
+ f75375_read16(client, F75375_REG_FAN(nr));
+ }
+ for (nr = 0; nr < 4; nr++)
+ data->in[nr] =
+ f75375_read8(client, F75375_REG_VOLT(nr));
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+static inline u16 rpm_from_reg(u16 reg)
+{
+ if (reg == 0 || reg == 0xffff)
+ return 0;
+ return (1500000 / reg);
+}
+
+static inline u16 rpm_to_reg(int rpm)
+{
+ if (rpm < 367 || rpm > 0xffff)
+ return 0xffff;
+ return (1500000 / rpm);
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[nr] = rpm_to_reg(val);
+ f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_fan_exp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->fan_exp[nr] = rpm_to_reg(val);
+ f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_exp[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
+ *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_enable[nr]);
+}
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ u8 fanmode;
+
+ if (val < 0 || val > 4)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
+ fanmode = ~(3 << FAN_CTRL_MODE(nr));
+
+ switch (val) {
+ case 0: /* Full speed */
+ fanmode |= (3 << FAN_CTRL_MODE(nr));
+ data->pwm[nr] = 255;
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
+ break;
+ case 1: /* PWM */
+ fanmode |= (3 << FAN_CTRL_MODE(nr));
+ break;
+ case 2: /* AUTOMATIC*/
+ fanmode |= (2 << FAN_CTRL_MODE(nr));
+ break;
+ case 3: /* fan speed */
+ break;
+ }
+ f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
+ data->pwm_enable[nr] = val;
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ u8 conf = 0;
+
+ if (val != 0 || val != 1 || data->kind == f75373)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ conf = f75375_read8(client, F75375_REG_CONFIG1);
+ conf = ~(1 << FAN_CTRL_LINEAR(nr));
+
+ if (val == 0)
+ conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
+
+ f75375_write8(client, F75375_REG_CONFIG1, conf);
+ data->pwm_mode[nr] = val;
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute
+ *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm[nr]);
+}
+
+static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
+ *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_mode[nr]);
+}
+
+#define VOLT_FROM_REG(val) ((val) * 8)
+#define VOLT_TO_REG(val) ((val) / 8)
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
+ mutex_lock(&data->update_lock);
+ data->in_max[nr] = val;
+ f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
+ mutex_lock(&data->update_lock);
+ data->in_min[nr] = val;
+ f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+#define TEMP_FROM_REG(val) ((val) * 1000)
+#define TEMP_TO_REG(val) ((val) / 1000)
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
+}
+
+static ssize_t show_temp_max_hyst(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct f75375_data *data = f75375_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr]));
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+ val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
+ mutex_lock(&data->update_lock);
+ data->temp_high[nr] = val;
+ f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_temp_max_hyst(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+ val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
+ mutex_lock(&data->update_lock);
+ data->temp_max_hyst[nr] = val;
+ f75375_write8(client, F75375_REG_TEMP_HYST(nr),
+ data->temp_max_hyst[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define show_fan(thing) \
+static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \
+ char *buf)\
+{\
+ int nr = to_sensor_dev_attr(attr)->index;\
+ struct f75375_data *data = f75375_update_device(dev); \
+ return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \
+}
+
+show_fan(fan);
+show_fan(fan_min);
+show_fan(fan_full);
+show_fan(fan_exp);
+
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
+static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR,
+ show_in_max, set_in_max, 0);
+static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR,
+ show_in_min, set_in_min, 0);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
+static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR,
+ show_in_max, set_in_max, 1);
+static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR,
+ show_in_min, set_in_min, 1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
+static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR,
+ show_in_max, set_in_max, 2);
+static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR,
+ show_in_min, set_in_min, 2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
+static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
+ show_in_max, set_in_max, 3);
+static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
+ show_in_min, set_in_min, 3);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
+ show_temp_max_hyst, set_temp_max_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
+ show_temp_max, set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
+ show_temp_max_hyst, set_temp_max_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
+ show_temp_max, set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_full, S_IRUGO, show_fan_full, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR,
+ show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan1_exp, S_IRUGO|S_IWUSR,
+ show_fan_exp, set_fan_exp, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_full, S_IRUGO, show_fan_full, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR,
+ show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan2_exp, S_IRUGO|S_IWUSR,
+ show_fan_exp, set_fan_exp, 1);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR,
+ show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO|S_IWUSR,
+ show_pwm_mode, set_pwm_mode, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
+ show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO|S_IWUSR,
+ show_pwm_mode, set_pwm_mode, 1);
+
+static struct attribute *f75375_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_full.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_exp.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_full.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_exp.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_mode.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_mode.dev_attr.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group f75375_group = {
+ .attrs = f75375_attributes,
+};
+
+static int f75375_detach_client(struct i2c_client *client)
+{
+ struct f75375_data *data = i2c_get_clientdata(client);
+ int err;
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &f75375_group);
+
+ err = i2c_detach_client(client);
+ if (err) {
+ dev_err(&client->dev,
+ "Client deregistration failed, "
+ "client not detached.\n");
+ return err;
+ }
+ kfree(data);
+ return 0;
+}
+
+static int f75375_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, f75375_detect);
+}
+
+/* This function is called by i2c_probe */
+static int f75375_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct f75375_data *data;
+ u8 version = 0;
+ int err = 0;
+ const char *name = "";
+
+ if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &f75375_driver;
+
+ if (kind < 0) {
+ u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
+ u16 chipid = f75375_read16(client, F75375_CHIP_ID);
+ version = f75375_read8(client, F75375_REG_VERSION);
+ if (chipid == 0x0306 && vendid == 0x1934) {
+ kind = f75375;
+ } else if (chipid == 0x0204 && vendid == 0x1934) {
+ kind = f75373;
+ } else {
+ dev_err(&adapter->dev,
+ "failed,%02X,%02X,%02X\n",
+ chipid, version, vendid);
+ goto exit_free;
+ }
+ }
+
+ if (kind == f75375) {
+ name = "f75375";
+ } else if (kind == f75373) {
+ name = "f75373";
+ }
+
+ dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
+ strlcpy(client->name, name, I2C_NAME_SIZE);
+ data->kind = kind;
+ mutex_init(&data->update_lock);
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
+ goto exit_detach;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &f75375_group);
+exit_detach:
+ i2c_detach_client(client);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __init sensors_f75375_init(void)
+{
+ return i2c_add_driver(&f75375_driver);
+}
+
+static void __exit sensors_f75375_exit(void)
+{
+ i2c_del_driver(&f75375_driver);
+}
+
+MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
+
+module_init(sensors_f75375_init);
+module_exit(sensors_f75375_exit);
struct fscher_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct fscher_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &fscher_group);
if ((err = i2c_detach_client(client)))
--- /dev/null
+/* fschmd.c
+ *
+ * Copyright (C) 2007 Hans de Goede <j.w.r.degoede@hhs.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes,
+ * Scylla, Heracles and Heimdall chips
+ *
+ * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6
+ * (candidate) fschmd drivers:
+ * Copyright (C) 2006 Thilo Cestonaro
+ * <thilo.cestonaro.external@fujitsu-siemens.com>
+ * Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
+ * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
+ * Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
+ * Copyright (C) 2000 Hermann Jung <hej@odn.de>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd);
+
+/*
+ * The FSCHMD registers and other defines
+ */
+
+/* chip identification */
+#define FSCHMD_REG_IDENT_0 0x00
+#define FSCHMD_REG_IDENT_1 0x01
+#define FSCHMD_REG_IDENT_2 0x02
+#define FSCHMD_REG_REVISION 0x03
+
+/* global control and status */
+#define FSCHMD_REG_EVENT_STATE 0x04
+#define FSCHMD_REG_CONTROL 0x05
+
+#define FSCHMD_CONTROL_ALERT_LED_MASK 0x01
+
+/* watchdog (support to be implemented) */
+#define FSCHMD_REG_WDOG_PRESET 0x28
+#define FSCHMD_REG_WDOG_STATE 0x23
+#define FSCHMD_REG_WDOG_CONTROL 0x21
+
+/* voltages, weird order is to keep the same order as the old drivers */
+static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
+
+/* minimum pwm at which the fan is driven (pwm can by increased depending on
+ the temp. Notice that for the scy some fans share there minimum speed.
+ Also notice that with the scy the sensor order is different then with the
+ other chips, this order was in the 2.4 driver and kept for consistency. */
+static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
+ { 0x55, 0x65 }, /* pos */
+ { 0x55, 0x65, 0xb5 }, /* her */
+ { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */
+ { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */
+ { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */
+};
+
+/* actual fan speed */
+static const u8 FSCHMD_REG_FAN_ACT[5][6] = {
+ { 0x0e, 0x6b, 0xab }, /* pos */
+ { 0x0e, 0x6b, 0xbb }, /* her */
+ { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */
+ { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */
+ { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */
+};
+
+/* fan status registers */
+static const u8 FSCHMD_REG_FAN_STATE[5][6] = {
+ { 0x0d, 0x62, 0xa2 }, /* pos */
+ { 0x0d, 0x62, 0xb2 }, /* her */
+ { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */
+ { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */
+ { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */
+};
+
+/* fan ripple / divider registers */
+static const u8 FSCHMD_REG_FAN_RIPPLE[5][6] = {
+ { 0x0f, 0x6f, 0xaf }, /* pos */
+ { 0x0f, 0x6f, 0xbf }, /* her */
+ { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */
+ { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */
+ { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */
+};
+
+static const int FSCHMD_NO_FAN_SENSORS[5] = { 3, 3, 6, 4, 5 };
+
+/* Fan status register bitmasks */
+#define FSCHMD_FAN_ALARM_MASK 0x04 /* called fault by FSC! */
+#define FSCHMD_FAN_NOT_PRESENT_MASK 0x08 /* not documented */
+
+
+/* actual temperature registers */
+static const u8 FSCHMD_REG_TEMP_ACT[5][5] = {
+ { 0x64, 0x32, 0x35 }, /* pos */
+ { 0x64, 0x32, 0x35 }, /* her */
+ { 0x64, 0xD0, 0x32, 0x35 }, /* scy */
+ { 0x64, 0x32, 0x35 }, /* hrc */
+ { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */
+};
+
+/* temperature state registers */
+static const u8 FSCHMD_REG_TEMP_STATE[5][5] = {
+ { 0x71, 0x81, 0x91 }, /* pos */
+ { 0x71, 0x81, 0x91 }, /* her */
+ { 0x71, 0xd1, 0x81, 0x91 }, /* scy */
+ { 0x71, 0x81, 0x91 }, /* hrc */
+ { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /*Â hmd */
+};
+
+/* temperature high limit registers, FSC does not document these. Proven to be
+ there with field testing on the fscher and fschrc, already supported / used
+ in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers
+ at these addresses, but doesn't want to confirm they are the same as with
+ the fscher?? */
+static const u8 FSCHMD_REG_TEMP_LIMIT[5][5] = {
+ { 0, 0, 0 }, /* pos */
+ { 0x76, 0x86, 0x96 }, /* her */
+ { 0x76, 0xd6, 0x86, 0x96 }, /* scy */
+ { 0x76, 0x86, 0x96 }, /* hrc */
+ { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /*Â hmd */
+};
+
+/* These were found through experimenting with an fscher, currently they are
+ not used, but we keep them around for future reference.
+static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 };
+static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */
+
+static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 };
+
+/* temp status register bitmasks */
+#define FSCHMD_TEMP_WORKING_MASK 0x01
+#define FSCHMD_TEMP_ALERT_MASK 0x02
+/* there only really is an alarm if the sensor is working and alert == 1 */
+#define FSCHMD_TEMP_ALARM_MASK \
+ (FSCHMD_TEMP_WORKING_MASK | FSCHMD_TEMP_ALERT_MASK)
+
+/* our driver name */
+#define FSCHMD_NAME "fschmd"
+
+/*
+ * Functions declarations
+ */
+
+static int fschmd_attach_adapter(struct i2c_adapter *adapter);
+static int fschmd_detach_client(struct i2c_client *client);
+static struct fschmd_data *fschmd_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver fschmd_driver = {
+ .driver = {
+ .name = FSCHMD_NAME,
+ },
+ .attach_adapter = fschmd_attach_adapter,
+ .detach_client = fschmd_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct fschmd_data {
+ struct i2c_client client;
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ int kind;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+
+ /* register values */
+ u8 global_control; /* global control register */
+ u8 volt[3]; /* 12, 5, battery voltage */
+ u8 temp_act[5]; /* temperature */
+ u8 temp_status[5]; /* status of sensor */
+ u8 temp_max[5]; /* high temp limit, notice: undocumented! */
+ u8 fan_act[6]; /* fans revolutions per second */
+ u8 fan_status[6]; /* fan status */
+ u8 fan_min[6]; /* fan min value for rps */
+ u8 fan_ripple[6]; /* divider for rps */
+};
+
+/*
+ * Sysfs attr show / store functions
+ */
+
+static ssize_t show_in_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ const int max_reading[3] = { 14200, 6600, 3300 };
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->volt[index] *
+ max_reading[index] + 128) / 255);
+}
+
+
+#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
+
+static ssize_t show_temp_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index]));
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
+}
+
+static ssize_t store_temp_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ long v = simple_strtol(buf, NULL, 10) / 1000;
+
+ v = SENSORS_LIMIT(v, -128, 127) + 128;
+
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(&data->client,
+ FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
+ data->temp_max[index] = v;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_temp_fault(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ /* bit 0 set means sensor working ok, so no fault! */
+ if (data->temp_status[index] & FSCHMD_TEMP_WORKING_MASK)
+ return sprintf(buf, "0\n");
+ else
+ return sprintf(buf, "1\n");
+}
+
+static ssize_t show_temp_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) ==
+ FSCHMD_TEMP_ALARM_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+
+#define RPM_FROM_REG(val) ((val) * 60)
+
+static ssize_t show_fan_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index]));
+}
+
+static ssize_t show_fan_div(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ /* bits 2..7 reserved => mask with 3 */
+ return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3));
+}
+
+static ssize_t store_fan_div(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ u8 reg;
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ /* supported values: 2, 4, 8 */
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ switch (v) {
+ case 2: v = 1; break;
+ case 4: v = 2; break;
+ case 8: v = 3; break;
+ default:
+ dev_err(dev, "fan_div value %lu not supported. "
+ "Choose one of 2, 4 or 8!\n", v);
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->update_lock);
+
+ reg = i2c_smbus_read_byte_data(&data->client,
+ FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
+
+ /* bits 2..7 reserved => mask with 0x03 */
+ reg &= ~0x03;
+ reg |= v;
+
+ i2c_smbus_write_byte_data(&data->client,
+ FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
+
+ data->fan_ripple[index] = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_fan_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if (data->fan_status[index] & FSCHMD_FAN_ALARM_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t show_fan_fault(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+
+static ssize_t show_pwm_auto_point1_pwm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ int val = fschmd_update_device(dev)->fan_min[index];
+
+ /* 0 = allow turning off, 1-255 = 50-100% */
+ if (val)
+ val = val / 2 + 128;
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ /* register: 0 = allow turning off, 1-255 = 50-100% */
+ if (v) {
+ v = SENSORS_LIMIT(v, 128, 255);
+ v = (v - 128) * 2 + 1;
+ }
+
+ mutex_lock(&data->update_lock);
+
+ i2c_smbus_write_byte_data(&data->client,
+ FSCHMD_REG_FAN_MIN[data->kind][index], v);
+ data->fan_min[index] = v;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+
+/* The FSC hwmon family has the ability to force an attached alert led to flash
+ from software, we export this as an alert_led sysfs attr */
+static ssize_t show_alert_led(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct fschmd_data *data = fschmd_update_device(dev);
+
+ if (data->global_control & FSCHMD_CONTROL_ALERT_LED_MASK)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t store_alert_led(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
+{
+ u8 reg;
+ struct fschmd_data *data = dev_get_drvdata(dev);
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+
+ reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL);
+
+ if (v)
+ reg |= FSCHMD_CONTROL_ALERT_LED_MASK;
+ else
+ reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK;
+
+ i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg);
+
+ data->global_control = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static struct sensor_device_attribute fschmd_attr[] = {
+ SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
+ SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
+ SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
+ SENSOR_ATTR(alert_led, 0644, show_alert_led, store_alert_led, 0),
+};
+
+static struct sensor_device_attribute fschmd_temp_attr[] = {
+ SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+ SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
+ SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
+ SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
+ SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+ SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
+ SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
+ SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
+ SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
+ SENSOR_ATTR(temp3_max, 0644, show_temp_max, store_temp_max, 2),
+ SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
+ SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
+ SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
+ SENSOR_ATTR(temp4_max, 0644, show_temp_max, store_temp_max, 3),
+ SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
+ SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
+ SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
+ SENSOR_ATTR(temp5_max, 0644, show_temp_max, store_temp_max, 4),
+ SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
+ SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
+};
+
+static struct sensor_device_attribute fschmd_fan_attr[] = {
+ SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
+ SENSOR_ATTR(fan1_div, 0644, show_fan_div, store_fan_div, 0),
+ SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
+ SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
+ SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 0),
+ SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
+ SENSOR_ATTR(fan2_div, 0644, show_fan_div, store_fan_div, 1),
+ SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
+ SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
+ SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 1),
+ SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
+ SENSOR_ATTR(fan3_div, 0644, show_fan_div, store_fan_div, 2),
+ SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
+ SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
+ SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 2),
+ SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
+ SENSOR_ATTR(fan4_div, 0644, show_fan_div, store_fan_div, 3),
+ SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
+ SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
+ SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 3),
+ SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
+ SENSOR_ATTR(fan5_div, 0644, show_fan_div, store_fan_div, 4),
+ SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
+ SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
+ SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 4),
+ SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
+ SENSOR_ATTR(fan6_div, 0644, show_fan_div, store_fan_div, 5),
+ SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
+ SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
+ SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
+ store_pwm_auto_point1_pwm, 5),
+};
+
+
+/*
+ * Real code
+ */
+
+static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct fschmd_data *data;
+ u8 revision;
+ const char * const names[5] = { "Poseidon", "Hermes", "Scylla",
+ "Heracles", "Heimdall" };
+ const char * const client_names[5] = { "fscpos", "fscher", "fscscy",
+ "fschrc", "fschmd" };
+ int i, err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return 0;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ * client structure, even though we cannot fill it completely yet.
+ * But it allows us to access i2c_smbus_read_byte_data. */
+ if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL)))
+ return -ENOMEM;
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &fschmd_driver;
+ mutex_init(&data->update_lock);
+
+ /* Detect & Identify the chip */
+ if (kind <= 0) {
+ char id[4];
+
+ id[0] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_IDENT_0);
+ id[1] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_IDENT_1);
+ id[2] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_IDENT_2);
+ id[3] = '\0';
+
+ if (!strcmp(id, "PEG"))
+ kind = fscpos;
+ else if (!strcmp(id, "HER"))
+ kind = fscher;
+ else if (!strcmp(id, "SCY"))
+ kind = fscscy;
+ else if (!strcmp(id, "HRC"))
+ kind = fschrc;
+ else if (!strcmp(id, "HMD"))
+ kind = fschmd;
+ else
+ goto exit_free;
+ }
+
+ if (kind == fscpos) {
+ /* The Poseidon has hardwired temp limits, fill these
+ in for the alarm resetting code */
+ data->temp_max[0] = 70 + 128;
+ data->temp_max[1] = 50 + 128;
+ data->temp_max[2] = 50 + 128;
+ }
+
+ /* i2c kind goes from 1-5, we want from 0-4 to address arrays */
+ data->kind = kind - 1;
+ strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) {
+ err = device_create_file(&client->dev,
+ &fschmd_attr[i].dev_attr);
+ if (err)
+ goto exit_detach;
+ }
+
+ for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) {
+ /* Poseidon doesn't have TEMP_LIMIT registers */
+ if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show ==
+ show_temp_max)
+ continue;
+
+ err = device_create_file(&client->dev,
+ &fschmd_temp_attr[i].dev_attr);
+ if (err)
+ goto exit_detach;
+ }
+
+ for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) {
+ /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */
+ if (kind == fscpos &&
+ !strcmp(fschmd_fan_attr[i].dev_attr.attr.name,
+ "pwm3_auto_point1_pwm"))
+ continue;
+
+ err = device_create_file(&client->dev,
+ &fschmd_fan_attr[i].dev_attr);
+ if (err)
+ goto exit_detach;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ data->hwmon_dev = NULL;
+ goto exit_detach;
+ }
+
+ revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
+ printk(KERN_INFO FSCHMD_NAME ": Detected FSC %s chip, revision: %d\n",
+ names[data->kind], (int) revision);
+
+ return 0;
+
+exit_detach:
+ fschmd_detach_client(client); /* will also free data for us */
+ return err;
+
+exit_free:
+ kfree(data);
+ return err;
+}
+
+static int fschmd_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, fschmd_detect);
+}
+
+static int fschmd_detach_client(struct i2c_client *client)
+{
+ struct fschmd_data *data = i2c_get_clientdata(client);
+ int i, err;
+
+ /* Check if registered in case we're called from fschmd_detect
+ to cleanup after an error */
+ if (data->hwmon_dev)
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++)
+ device_remove_file(&client->dev, &fschmd_attr[i].dev_attr);
+ for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++)
+ device_remove_file(&client->dev,
+ &fschmd_temp_attr[i].dev_attr);
+ for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++)
+ device_remove_file(&client->dev,
+ &fschmd_fan_attr[i].dev_attr);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(data);
+ return 0;
+}
+
+static struct fschmd_data *fschmd_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct fschmd_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+
+ for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) {
+ data->temp_act[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_TEMP_ACT[data->kind][i]);
+ data->temp_status[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_TEMP_STATE[data->kind][i]);
+
+ /* The fscpos doesn't have TEMP_LIMIT registers */
+ if (FSCHMD_REG_TEMP_LIMIT[data->kind][i])
+ data->temp_max[i] = i2c_smbus_read_byte_data(
+ client,
+ FSCHMD_REG_TEMP_LIMIT[data->kind][i]);
+
+ /* reset alarm if the alarm condition is gone,
+ the chip doesn't do this itself */
+ if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) ==
+ FSCHMD_TEMP_ALARM_MASK &&
+ data->temp_act[i] < data->temp_max[i])
+ i2c_smbus_write_byte_data(client,
+ FSCHMD_REG_TEMP_STATE[data->kind][i],
+ FSCHMD_TEMP_ALERT_MASK);
+ }
+
+ for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
+ data->fan_act[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_FAN_ACT[data->kind][i]);
+ data->fan_status[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_FAN_STATE[data->kind][i]);
+ data->fan_ripple[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_FAN_RIPPLE[data->kind][i]);
+
+ /* The fscpos third fan doesn't have a fan_min */
+ if (FSCHMD_REG_FAN_MIN[data->kind][i])
+ data->fan_min[i] = i2c_smbus_read_byte_data(
+ client,
+ FSCHMD_REG_FAN_MIN[data->kind][i]);
+
+ /* reset fan status if speed is back to > 0 */
+ if ((data->fan_status[i] & FSCHMD_FAN_ALARM_MASK) &&
+ data->fan_act[i])
+ i2c_smbus_write_byte_data(client,
+ FSCHMD_REG_FAN_STATE[data->kind][i],
+ FSCHMD_FAN_ALARM_MASK);
+ }
+
+ for (i = 0; i < 3; i++)
+ data->volt[i] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_VOLT[i]);
+
+ data->global_control = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_CONTROL);
+
+ /* To be implemented in the future
+ data->watchdog[0] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_WDOG_PRESET);
+ data->watchdog[1] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_WDOG_STATE);
+ data->watchdog[2] = i2c_smbus_read_byte_data(client,
+ FSCHMD_REG_WDOG_CONTROL); */
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int __init fschmd_init(void)
+{
+ return i2c_add_driver(&fschmd_driver);
+}
+
+static void __exit fschmd_exit(void)
+{
+ i2c_del_driver(&fschmd_driver);
+}
+
+MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
+MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles and "
+ "Heimdall driver");
+MODULE_LICENSE("GPL");
+
+module_init(fschmd_init);
+module_exit(fschmd_exit);
*/
struct fscpos_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* 0 until following fields are valid */
unsigned long last_updated; /* In jiffies */
if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct fscpos_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &fscpos_group);
if ((err = i2c_detach_client(client)))
/* Each client has this additional data */
struct gl518_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
enum chips type;
struct mutex update_lock;
if ((err = sysfs_create_group(&new_client->dev.kobj, &gl518_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct gl518_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &gl518_group);
if ((err = i2c_detach_client(client)))
/* Client data */
struct gl520_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until the following fields are valid */
unsigned long last_updated; /* in jiffies */
}
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct gl520_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &gl520_group);
sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
static DEFINE_SPINLOCK(idr_lock);
/**
- * hwmon_device_register - register w/ hwmon sysfs class
+ * hwmon_device_register - register w/ hwmon
* @dev: the device to register
*
- * hwmon_device_unregister() must be called when the class device is no
+ * hwmon_device_unregister() must be called when the device is no
* longer needed.
*
- * Returns the pointer to the new struct class device.
+ * Returns the pointer to the new device.
*/
-struct class_device *hwmon_device_register(struct device *dev)
+struct device *hwmon_device_register(struct device *dev)
{
- struct class_device *cdev;
+ struct device *hwdev;
int id, err;
again:
return ERR_PTR(err);
id = id & MAX_ID_MASK;
- cdev = class_device_create(hwmon_class, NULL, MKDEV(0,0), dev,
- HWMON_ID_FORMAT, id);
+ hwdev = device_create(hwmon_class, dev, MKDEV(0,0), HWMON_ID_FORMAT, id);
- if (IS_ERR(cdev)) {
+ if (IS_ERR(hwdev)) {
spin_lock(&idr_lock);
idr_remove(&hwmon_idr, id);
spin_unlock(&idr_lock);
}
- return cdev;
+ return hwdev;
}
/**
* hwmon_device_unregister - removes the previously registered class device
*
- * @cdev: the class device to destroy
+ * @dev: the class device to destroy
*/
-void hwmon_device_unregister(struct class_device *cdev)
+void hwmon_device_unregister(struct device *dev)
{
int id;
- if (likely(sscanf(cdev->class_id, HWMON_ID_FORMAT, &id) == 1)) {
- class_device_unregister(cdev);
+ if (likely(sscanf(dev->bus_id, HWMON_ID_FORMAT, &id) == 1)) {
+ device_unregister(dev);
spin_lock(&idr_lock);
idr_remove(&hwmon_idr, id);
spin_unlock(&idr_lock);
} else
- dev_dbg(cdev->dev,
+ dev_dbg(dev->parent,
"hwmon_device_unregister() failed: bad class ID!\n");
}
--- /dev/null
+/*
+ * A hwmon driver for the IBM PowerExecutive temperature/power sensors
+ * Copyright (C) 2007 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/ipmi.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+
+#define REFRESH_INTERVAL (2 * HZ)
+#define DRVNAME "ibmpex"
+
+#define PEX_GET_VERSION 1
+#define PEX_GET_SENSOR_COUNT 2
+#define PEX_GET_SENSOR_NAME 3
+#define PEX_RESET_HIGH_LOW 4
+#define PEX_GET_SENSOR_DATA 6
+
+#define PEX_NET_FUNCTION 0x3A
+#define PEX_COMMAND 0x3C
+
+static inline u16 extract_value(const char *data, int offset)
+{
+ return be16_to_cpup((u16 *)&data[offset]);
+}
+
+#define TEMP_SENSOR 1
+#define POWER_SENSOR 2
+
+#define PEX_SENSOR_TYPE_LEN 3
+static u8 const power_sensor_sig[] = {0x70, 0x77, 0x72};
+static u8 const temp_sensor_sig[] = {0x74, 0x65, 0x6D};
+
+#define PEX_MULT_LEN 2
+static u8 const watt_sensor_sig[] = {0x41, 0x43};
+
+#define PEX_NUM_SENSOR_FUNCS 3
+static char const * const power_sensor_name_templates[] = {
+ "%s%d_average",
+ "%s%d_average_lowest",
+ "%s%d_average_highest"
+};
+static char const * const temp_sensor_name_templates[] = {
+ "%s%d_input",
+ "%s%d_input_lowest",
+ "%s%d_input_highest"
+};
+
+static void ibmpex_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
+static void ibmpex_register_bmc(int iface, struct device *dev);
+static void ibmpex_bmc_gone(int iface);
+
+struct ibmpex_sensor_data {
+ int in_use;
+ s16 values[PEX_NUM_SENSOR_FUNCS];
+ int multiplier;
+
+ struct sensor_device_attribute_2 attr[PEX_NUM_SENSOR_FUNCS];
+};
+
+struct ibmpex_bmc_data {
+ struct list_head list;
+ struct device *hwmon_dev;
+ struct device *bmc_device;
+ struct mutex lock;
+ char valid;
+ unsigned long last_updated; /* In jiffies */
+
+ struct ipmi_addr address;
+ struct completion read_complete;
+ ipmi_user_t user;
+ int interface;
+
+ struct kernel_ipmi_msg tx_message;
+ unsigned char tx_msg_data[IPMI_MAX_MSG_LENGTH];
+ long tx_msgid;
+
+ unsigned char rx_msg_data[IPMI_MAX_MSG_LENGTH];
+ unsigned long rx_msg_len;
+ unsigned char rx_result;
+ int rx_recv_type;
+
+ unsigned char sensor_major;
+ unsigned char sensor_minor;
+
+ unsigned char num_sensors;
+ struct ibmpex_sensor_data *sensors;
+};
+
+struct ibmpex_driver_data {
+ struct list_head bmc_data;
+ struct ipmi_smi_watcher bmc_events;
+ struct ipmi_user_hndl ipmi_hndlrs;
+};
+
+static struct ibmpex_driver_data driver_data = {
+ .bmc_data = LIST_HEAD_INIT(driver_data.bmc_data),
+ .bmc_events = {
+ .owner = THIS_MODULE,
+ .new_smi = ibmpex_register_bmc,
+ .smi_gone = ibmpex_bmc_gone,
+ },
+ .ipmi_hndlrs = {
+ .ipmi_recv_hndl = ibmpex_msg_handler,
+ },
+};
+
+static int ibmpex_send_message(struct ibmpex_bmc_data *data)
+{
+ int err;
+
+ err = ipmi_validate_addr(&data->address, sizeof(data->address));
+ if (err)
+ goto out;
+
+ data->tx_msgid++;
+ err = ipmi_request_settime(data->user, &data->address, data->tx_msgid,
+ &data->tx_message, data, 0, 0, 0);
+ if (err)
+ goto out1;
+
+ return 0;
+out1:
+ printk(KERN_ERR "%s: request_settime=%x\n", __FUNCTION__, err);
+ return err;
+out:
+ printk(KERN_ERR "%s: validate_addr=%x\n", __FUNCTION__, err);
+ return err;
+}
+
+static int ibmpex_ver_check(struct ibmpex_bmc_data *data)
+{
+ data->tx_msg_data[0] = PEX_GET_VERSION;
+ data->tx_message.data_len = 1;
+ ibmpex_send_message(data);
+
+ wait_for_completion(&data->read_complete);
+
+ if (data->rx_result || data->rx_msg_len != 6)
+ return -ENOENT;
+
+ data->sensor_major = data->rx_msg_data[0];
+ data->sensor_minor = data->rx_msg_data[1];
+
+ printk(KERN_INFO DRVNAME ": Found BMC with sensor interface "
+ "v%d.%d %d-%02d-%02d on interface %d\n",
+ data->sensor_major,
+ data->sensor_minor,
+ extract_value(data->rx_msg_data, 2),
+ data->rx_msg_data[4],
+ data->rx_msg_data[5],
+ data->interface);
+
+ return 0;
+}
+
+static int ibmpex_query_sensor_count(struct ibmpex_bmc_data *data)
+{
+ data->tx_msg_data[0] = PEX_GET_SENSOR_COUNT;
+ data->tx_message.data_len = 1;
+ ibmpex_send_message(data);
+
+ wait_for_completion(&data->read_complete);
+
+ if (data->rx_result || data->rx_msg_len != 1)
+ return -ENOENT;
+
+ return data->rx_msg_data[0];
+}
+
+static int ibmpex_query_sensor_name(struct ibmpex_bmc_data *data, int sensor)
+{
+ data->tx_msg_data[0] = PEX_GET_SENSOR_NAME;
+ data->tx_msg_data[1] = sensor;
+ data->tx_message.data_len = 2;
+ ibmpex_send_message(data);
+
+ wait_for_completion(&data->read_complete);
+
+ if (data->rx_result || data->rx_msg_len < 1)
+ return -ENOENT;
+
+ return 0;
+}
+
+static int ibmpex_query_sensor_data(struct ibmpex_bmc_data *data, int sensor)
+{
+ data->tx_msg_data[0] = PEX_GET_SENSOR_DATA;
+ data->tx_msg_data[1] = sensor;
+ data->tx_message.data_len = 2;
+ ibmpex_send_message(data);
+
+ wait_for_completion(&data->read_complete);
+
+ if (data->rx_result || data->rx_msg_len < 26) {
+ printk(KERN_ERR "Error reading sensor %d, please check.\n",
+ sensor);
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static int ibmpex_reset_high_low_data(struct ibmpex_bmc_data *data)
+{
+ data->tx_msg_data[0] = PEX_RESET_HIGH_LOW;
+ data->tx_message.data_len = 1;
+ ibmpex_send_message(data);
+
+ wait_for_completion(&data->read_complete);
+
+ return 0;
+}
+
+static void ibmpex_update_device(struct ibmpex_bmc_data *data)
+{
+ int i, err;
+
+ mutex_lock(&data->lock);
+ if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+ data->valid)
+ goto out;
+
+ for (i = 0; i < data->num_sensors; i++) {
+ if (!data->sensors[i].in_use)
+ continue;
+ err = ibmpex_query_sensor_data(data, i);
+ if (err)
+ continue;
+ data->sensors[i].values[0] =
+ extract_value(data->rx_msg_data, 16);
+ data->sensors[i].values[1] =
+ extract_value(data->rx_msg_data, 18);
+ data->sensors[i].values[2] =
+ extract_value(data->rx_msg_data, 20);
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+
+out:
+ mutex_unlock(&data->lock);
+}
+
+static struct ibmpex_bmc_data *get_bmc_data(int iface)
+{
+ struct ibmpex_bmc_data *p, *next;
+
+ list_for_each_entry_safe(p, next, &driver_data.bmc_data, list)
+ if (p->interface == iface)
+ return p;
+
+ return NULL;
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", DRVNAME);
+}
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+static ssize_t ibmpex_show_sensor(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+ struct ibmpex_bmc_data *data = dev_get_drvdata(dev);
+ int mult = data->sensors[attr->index].multiplier;
+ ibmpex_update_device(data);
+
+ return sprintf(buf, "%d\n",
+ data->sensors[attr->index].values[attr->nr] * mult);
+}
+
+static ssize_t ibmpex_reset_high_low(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct ibmpex_bmc_data *data = dev_get_drvdata(dev);
+
+ ibmpex_reset_high_low_data(data);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(reset_high_low, S_IWUSR, NULL,
+ ibmpex_reset_high_low, 0);
+
+static int is_power_sensor(const char *sensor_id, int len)
+{
+ if (len < PEX_SENSOR_TYPE_LEN)
+ return 0;
+
+ if (!memcmp(sensor_id, power_sensor_sig, PEX_SENSOR_TYPE_LEN))
+ return 1;
+ return 0;
+}
+
+static int is_temp_sensor(const char *sensor_id, int len)
+{
+ if (len < PEX_SENSOR_TYPE_LEN)
+ return 0;
+
+ if (!memcmp(sensor_id, temp_sensor_sig, PEX_SENSOR_TYPE_LEN))
+ return 1;
+ return 0;
+}
+
+static int power_sensor_multiplier(const char *sensor_id, int len)
+{
+ int i;
+
+ for (i = PEX_SENSOR_TYPE_LEN; i < len - 1; i++)
+ if (!memcmp(&sensor_id[i], watt_sensor_sig, PEX_MULT_LEN))
+ return 1000000;
+
+ return 100000;
+}
+
+static int create_sensor(struct ibmpex_bmc_data *data, int type,
+ int counter, int sensor, int func)
+{
+ int err;
+ char *n;
+
+ n = kmalloc(32, GFP_KERNEL);
+ if (!n)
+ return -ENOMEM;
+
+ if (type == TEMP_SENSOR)
+ sprintf(n, temp_sensor_name_templates[func], "temp", counter);
+ else if (type == POWER_SENSOR)
+ sprintf(n, power_sensor_name_templates[func], "power", counter);
+
+ data->sensors[sensor].attr[func].dev_attr.attr.name = n;
+ data->sensors[sensor].attr[func].dev_attr.attr.mode = S_IRUGO;
+ data->sensors[sensor].attr[func].dev_attr.show = ibmpex_show_sensor;
+ data->sensors[sensor].attr[func].index = sensor;
+ data->sensors[sensor].attr[func].nr = func;
+
+ err = device_create_file(data->bmc_device,
+ &data->sensors[sensor].attr[func].dev_attr);
+ if (err) {
+ data->sensors[sensor].attr[func].dev_attr.attr.name = NULL;
+ kfree(n);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ibmpex_find_sensors(struct ibmpex_bmc_data *data)
+{
+ int i, j, err;
+ int sensor_type;
+ int sensor_counter;
+ int num_power = 0;
+ int num_temp = 0;
+
+ err = ibmpex_query_sensor_count(data);
+ if (err <= 0)
+ return -ENOENT;
+ data->num_sensors = err;
+
+ data->sensors = kzalloc(data->num_sensors * sizeof(*data->sensors),
+ GFP_KERNEL);
+ if (!data->sensors)
+ return -ENOMEM;
+
+ for (i = 0; i < data->num_sensors; i++) {
+ err = ibmpex_query_sensor_name(data, i);
+ if (err)
+ continue;
+
+ if (is_power_sensor(data->rx_msg_data, data->rx_msg_len)) {
+ sensor_type = POWER_SENSOR;
+ num_power++;
+ sensor_counter = num_power;
+ data->sensors[i].multiplier =
+ power_sensor_multiplier(data->rx_msg_data,
+ data->rx_msg_len);
+ } else if (is_temp_sensor(data->rx_msg_data,
+ data->rx_msg_len)) {
+ sensor_type = TEMP_SENSOR;
+ num_temp++;
+ sensor_counter = num_temp;
+ data->sensors[i].multiplier = 1;
+ } else
+ continue;
+
+ data->sensors[i].in_use = 1;
+
+ /* Create attributes */
+ for (j = 0; j < PEX_NUM_SENSOR_FUNCS; j++) {
+ err = create_sensor(data, sensor_type, sensor_counter,
+ i, j);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
+ err = device_create_file(data->bmc_device,
+ &sensor_dev_attr_reset_high_low.dev_attr);
+ if (err)
+ goto exit_remove;
+
+ err = device_create_file(data->bmc_device,
+ &sensor_dev_attr_name.dev_attr);
+ if (err)
+ goto exit_remove;
+
+ return 0;
+
+exit_remove:
+ device_remove_file(data->bmc_device,
+ &sensor_dev_attr_reset_high_low.dev_attr);
+ device_remove_file(data->bmc_device, &sensor_dev_attr_name.dev_attr);
+ for (i = 0; i < data->num_sensors; i++)
+ for (j = 0; j < PEX_NUM_SENSOR_FUNCS; j++) {
+ if (!data->sensors[i].attr[j].dev_attr.attr.name)
+ continue;
+ device_remove_file(data->bmc_device,
+ &data->sensors[i].attr[j].dev_attr);
+ kfree(data->sensors[i].attr[j].dev_attr.attr.name);
+ }
+
+ kfree(data->sensors);
+ return err;
+}
+
+static void ibmpex_register_bmc(int iface, struct device *dev)
+{
+ struct ibmpex_bmc_data *data;
+ int err;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR DRVNAME ": Insufficient memory for BMC "
+ "interface %d.\n", data->interface);
+ return;
+ }
+
+ data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ data->address.channel = IPMI_BMC_CHANNEL;
+ data->address.data[0] = 0;
+ data->interface = iface;
+ data->bmc_device = dev;
+
+ /* Create IPMI messaging interface user */
+ err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
+ data, &data->user);
+ if (err < 0) {
+ printk(KERN_ERR DRVNAME ": Error, unable to register user with "
+ "ipmi interface %d\n",
+ data->interface);
+ goto out;
+ }
+
+ mutex_init(&data->lock);
+
+ /* Initialize message */
+ data->tx_msgid = 0;
+ init_completion(&data->read_complete);
+ data->tx_message.netfn = PEX_NET_FUNCTION;
+ data->tx_message.cmd = PEX_COMMAND;
+ data->tx_message.data = data->tx_msg_data;
+
+ /* Does this BMC support PowerExecutive? */
+ err = ibmpex_ver_check(data);
+ if (err)
+ goto out_user;
+
+ /* Register the BMC as a HWMON class device */
+ data->hwmon_dev = hwmon_device_register(data->bmc_device);
+
+ if (IS_ERR(data->hwmon_dev)) {
+ printk(KERN_ERR DRVNAME ": Error, unable to register hwmon "
+ "class device for interface %d\n",
+ data->interface);
+ goto out_user;
+ }
+
+ /* finally add the new bmc data to the bmc data list */
+ dev_set_drvdata(dev, data);
+ list_add_tail(&data->list, &driver_data.bmc_data);
+
+ /* Now go find all the sensors */
+ err = ibmpex_find_sensors(data);
+ if (err) {
+ printk(KERN_ERR "Error %d allocating memory\n", err);
+ goto out_register;
+ }
+
+ return;
+
+out_register:
+ hwmon_device_unregister(data->hwmon_dev);
+out_user:
+ ipmi_destroy_user(data->user);
+out:
+ kfree(data);
+}
+
+static void ibmpex_bmc_delete(struct ibmpex_bmc_data *data)
+{
+ int i, j;
+
+ device_remove_file(data->bmc_device,
+ &sensor_dev_attr_reset_high_low.dev_attr);
+ device_remove_file(data->bmc_device, &sensor_dev_attr_name.dev_attr);
+ for (i = 0; i < data->num_sensors; i++)
+ for (j = 0; j < PEX_NUM_SENSOR_FUNCS; j++) {
+ if (!data->sensors[i].attr[j].dev_attr.attr.name)
+ continue;
+ device_remove_file(data->bmc_device,
+ &data->sensors[i].attr[j].dev_attr);
+ kfree(data->sensors[i].attr[j].dev_attr.attr.name);
+ }
+
+ list_del(&data->list);
+ dev_set_drvdata(data->bmc_device, NULL);
+ hwmon_device_unregister(data->hwmon_dev);
+ ipmi_destroy_user(data->user);
+ kfree(data->sensors);
+ kfree(data);
+}
+
+static void ibmpex_bmc_gone(int iface)
+{
+ struct ibmpex_bmc_data *data = get_bmc_data(iface);
+
+ if (!data)
+ return;
+
+ ibmpex_bmc_delete(data);
+}
+
+static void ibmpex_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data)
+{
+ struct ibmpex_bmc_data *data = (struct ibmpex_bmc_data *)user_msg_data;
+
+ if (msg->msgid != data->tx_msgid) {
+ printk(KERN_ERR "Received msgid (%02x) and transmitted "
+ "msgid (%02x) mismatch!\n",
+ (int)msg->msgid,
+ (int)data->tx_msgid);
+ ipmi_free_recv_msg(msg);
+ return;
+ }
+
+ data->rx_recv_type = msg->recv_type;
+ if (msg->msg.data_len > 0)
+ data->rx_result = msg->msg.data[0];
+ else
+ data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE;
+
+ if (msg->msg.data_len > 1) {
+ data->rx_msg_len = msg->msg.data_len - 1;
+ memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len);
+ } else
+ data->rx_msg_len = 0;
+
+ ipmi_free_recv_msg(msg);
+ complete(&data->read_complete);
+}
+
+static int __init ibmpex_init(void)
+{
+ return ipmi_smi_watcher_register(&driver_data.bmc_events);
+}
+
+static void __exit ibmpex_exit(void)
+{
+ struct ibmpex_bmc_data *p, *next;
+
+ ipmi_smi_watcher_unregister(&driver_data.bmc_events);
+ list_for_each_entry_safe(p, next, &driver_data.bmc_data, list)
+ ibmpex_bmc_delete(p);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("IBM PowerExecutive power/temperature sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(ibmpex_init);
+module_exit(ibmpex_exit);
/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
-#define IT87_REG_FAN(nr) (0x0d + (nr))
-#define IT87_REG_FAN_MIN(nr) (0x10 + (nr))
-#define IT87_REG_FANX(nr) (0x18 + (nr))
-#define IT87_REG_FANX_MIN(nr) (0x1b + (nr))
+static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
+static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86 };
+static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83 };
+static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
#define IT87_REG_PWM(nr) (0x15 + (nr))
/* For each registered chip, we need to keep some data in memory.
The structure is dynamically allocated. */
struct it87_data {
- struct class_device *class_dev;
+ struct device *hwmon_dev;
enum chips type;
unsigned short addr;
u8 in_max[8]; /* Register value */
u8 in_min[8]; /* Register value */
u8 has_fan; /* Bitfield, fans enabled */
- u16 fan[3]; /* Register values, possibly combined */
- u16 fan_min[3]; /* Register values, possibly combined */
+ u16 fan[5]; /* Register values, possibly combined */
+ u16 fan_min[5]; /* Register values, possibly combined */
u8 temp[3]; /* Register value */
u8 temp_high[3]; /* Register value */
u8 temp_low[3]; /* Register value */
}
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
/* Restore fan min limit */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN16_TO_REG(val);
- it87_write_value(data, IT87_REG_FAN_MIN(nr),
+ it87_write_value(data, IT87_REG_FAN_MIN[nr],
data->fan_min[nr] & 0xff);
- it87_write_value(data, IT87_REG_FANX_MIN(nr),
+ it87_write_value(data, IT87_REG_FANX_MIN[nr],
data->fan_min[nr] >> 8);
mutex_unlock(&data->update_lock);
return count;
show_fan16_offset(1);
show_fan16_offset(2);
show_fan16_offset(3);
+show_fan16_offset(4);
+show_fan16_offset(5);
/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct it87_data *data = it87_update_device(dev);
+ struct it87_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t
&sensor_dev_attr_fan2_min16.dev_attr.attr,
&sensor_dev_attr_fan3_input16.dev_attr.attr,
&sensor_dev_attr_fan3_min16.dev_attr.attr,
+ &sensor_dev_attr_fan4_input16.dev_attr.attr,
+ &sensor_dev_attr_fan4_min16.dev_attr.attr,
+ &sensor_dev_attr_fan5_input16.dev_attr.attr,
+ &sensor_dev_attr_fan5_min16.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan3_min16.dev_attr)))
goto ERROR4;
}
+ if (data->has_fan & (1 << 3)) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_fan4_input16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan4_min16.dev_attr)))
+ goto ERROR4;
+ }
+ if (data->has_fan & (1 << 4)) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_fan5_input16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan5_min16.dev_attr)))
+ goto ERROR4;
+ }
} else {
/* 8-bit tachometers with clock divider */
if (data->has_fan & (1 << 0)) {
goto ERROR4;
}
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR4;
}
{
struct it87_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &it87_group);
sysfs_remove_group(&pdev->dev.kobj, &it87_group_opt);
it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
}
/* Set current fan mode registers and the default settings for the
data->in[8] =
it87_read_value(data, IT87_REG_VIN(8));
- for (i = 0; i < 3; i++) {
+ for (i = 0; i < 5; i++) {
/* Skip disabled fans */
if (!(data->has_fan & (1 << i)))
continue;
data->fan_min[i] =
- it87_read_value(data, IT87_REG_FAN_MIN(i));
+ it87_read_value(data, IT87_REG_FAN_MIN[i]);
data->fan[i] = it87_read_value(data,
- IT87_REG_FAN(i));
+ IT87_REG_FAN[i]);
/* Add high byte if in 16-bit mode */
if (data->type == it8716 || data->type == it8718) {
data->fan[i] |= it87_read_value(data,
- IT87_REG_FANX(i)) << 8;
+ IT87_REG_FANX[i]) << 8;
data->fan_min[i] |= it87_read_value(data,
- IT87_REG_FANX_MIN(i)) << 8;
+ IT87_REG_FANX_MIN[i]) << 8;
}
}
for (i = 0; i < 3; i++) {
#define SEL_CORE 0x04
struct k8temp_data {
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
const char *name;
char valid; /* zero until following fields are valid */
if (err)
goto exit_remove;
- data->class_dev = hwmon_device_register(&pdev->dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
{
struct k8temp_data *data = dev_get_drvdata(&pdev->dev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&pdev->dev,
&sensor_dev_attr_temp1_input.dev_attr);
device_remove_file(&pdev->dev,
struct lm63_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
goto exit_remove_files;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct lm63_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm63_group);
sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
#define DRVNAME "lm70"
struct lm70 {
- struct class_device *cdev;
+ struct device *hwmon_dev;
struct semaphore sem;
};
* So it's equivalent to multiplying by 0.25 * 1000 = 250.
*/
val = ((int)raw/32) * 250;
- status = sprintf(buf, "%+d\n", val); /* millidegrees Celsius */
+ status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
out:
up(&p_lm70->sem);
return status;
static DEVICE_ATTR(temp1_input, S_IRUGO, lm70_sense_temp, NULL);
+static ssize_t lm70_show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ return sprintf(buf, "lm70\n");
+}
+
+static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL);
+
/*----------------------------------------------------------------------*/
static int __devinit lm70_probe(struct spi_device *spi)
init_MUTEX(&p_lm70->sem);
/* sysfs hook */
- p_lm70->cdev = hwmon_device_register(&spi->dev);
- if (IS_ERR(p_lm70->cdev)) {
+ p_lm70->hwmon_dev = hwmon_device_register(&spi->dev);
+ if (IS_ERR(p_lm70->hwmon_dev)) {
dev_dbg(&spi->dev, "hwmon_device_register failed.\n");
- status = PTR_ERR(p_lm70->cdev);
+ status = PTR_ERR(p_lm70->hwmon_dev);
goto out_dev_reg_failed;
}
dev_set_drvdata(&spi->dev, p_lm70);
- if ((status = device_create_file(&spi->dev, &dev_attr_temp1_input))) {
+ if ((status = device_create_file(&spi->dev, &dev_attr_temp1_input))
+ || (status = device_create_file(&spi->dev, &dev_attr_name))) {
dev_dbg(&spi->dev, "device_create_file failure.\n");
goto out_dev_create_file_failed;
}
return 0;
out_dev_create_file_failed:
- hwmon_device_unregister(p_lm70->cdev);
+ device_remove_file(&spi->dev, &dev_attr_temp1_input);
+ hwmon_device_unregister(p_lm70->hwmon_dev);
out_dev_reg_failed:
dev_set_drvdata(&spi->dev, NULL);
kfree(p_lm70);
struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
device_remove_file(&spi->dev, &dev_attr_temp1_input);
- hwmon_device_unregister(p_lm70->cdev);
+ device_remove_file(&spi->dev, &dev_attr_name);
+ hwmon_device_unregister(p_lm70->hwmon_dev);
dev_set_drvdata(&spi->dev, NULL);
kfree(p_lm70);
/* Each client has this additional data */
struct lm75_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
struct i2c_client *client = to_i2c_client(dev);
struct lm75_data *data = i2c_get_clientdata(client);
int nr = attr->index;
- unsigned long temp = simple_strtoul(buf, NULL, 10);
+ long temp = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp[nr] = LM75_TEMP_TO_REG(temp);
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
static int lm75_detach_client(struct i2c_client *client)
{
struct lm75_data *data = i2c_get_clientdata(client);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm75_group);
i2c_detach_client(client);
kfree(data);
/* TEMP: 0.001C/bit (-55C to +125C)
REG: (0.5C/bit, two's complement) << 7 */
-static inline u16 LM75_TEMP_TO_REG(int temp)
+static inline u16 LM75_TEMP_TO_REG(long temp)
{
int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
ntemp += (ntemp<0 ? -250 : 250);
/* Each client has this additional data */
struct lm77_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid;
unsigned long last_updated; /* In jiffies */
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct lm77_data *data = i2c_get_clientdata(client); \
- long val = simple_strtoul(buf, NULL, 10); \
+ long val = simple_strtol(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->value = val; \
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm77_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
static int lm77_detach_client(struct i2c_client *client)
{
struct lm77_data *data = i2c_get_clientdata(client);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm77_group);
i2c_detach_client(client);
kfree(data);
the driver field to differentiate between I2C and ISA chips. */
struct lm78_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
enum chips type;
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct lm78_data *data = lm78_update_device(dev);
+ int nr = to_sensor_dev_attr(da)->index;
+ return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+
/* This function is called when:
* lm78_driver is inserted (when this module is loaded), for each
available adapter
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in2_min.dev_attr.attr,
&sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
&sensor_dev_attr_in4_input.dev_attr.attr,
&sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in5_min.dev_attr.attr,
&sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in6_min.dev_attr.attr,
&sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
&dev_attr_temp1_input.attr,
&dev_attr_temp1_max.attr,
&dev_attr_temp1_max_hyst.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
&sensor_dev_attr_fan3_input.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_div.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_cpu0_vid.attr,
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm78_group)))
goto ERROR3;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR4;
}
struct lm78_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm78_group);
if ((err = i2c_detach_client(client)))
|| (err = device_create_file(&pdev->dev, &dev_attr_name)))
goto exit_remove_files;
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
{
struct lm78_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
device_remove_file(&pdev->dev, &dev_attr_name);
release_region(data->client.addr, LM78_EXTENT);
struct lm80_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm80_group)))
goto error_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto error_remove;
}
struct lm80_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm80_group);
if ((err = i2c_detach_client(client)))
return err;
struct lm83_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
goto exit_remove_files;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct lm83_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm83_group);
sysfs_remove_group(&client->dev.kobj, &lm83_group_opt);
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#define EMC6D102_REG_EXTEND_ADC3 0x87
#define EMC6D102_REG_EXTEND_ADC4 0x88
-#define LM85_ALARM_IN0 0x0001
-#define LM85_ALARM_IN1 0x0002
-#define LM85_ALARM_IN2 0x0004
-#define LM85_ALARM_IN3 0x0008
-#define LM85_ALARM_TEMP1 0x0010
-#define LM85_ALARM_TEMP2 0x0020
-#define LM85_ALARM_TEMP3 0x0040
-#define LM85_ALARM_ALARM2 0x0080
-#define LM85_ALARM_IN4 0x0100
-#define LM85_ALARM_RESERVED 0x0200
-#define LM85_ALARM_FAN1 0x0400
-#define LM85_ALARM_FAN2 0x0800
-#define LM85_ALARM_FAN3 0x1000
-#define LM85_ALARM_FAN4 0x2000
-#define LM85_ALARM_TEMP1_FAULT 0x4000
-#define LM85_ALARM_TEMP3_FAULT 0x8000
-
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. Note that you should be a bit careful with which arguments
#define INS_TO_REG(n,val) \
SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
-#define INSEXT_FROM_REG(n,val,ext,scale) \
- SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
+#define INSEXT_FROM_REG(n,val,ext) \
+ SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
-#define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1)
+#define INS_FROM_REG(n,val) SCALE((val), 192, lm85_scaling[n])
/* FAN speed is measured using 90kHz clock */
-#define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
+static inline u16 FAN_TO_REG(unsigned long val)
+{
+ if (!val)
+ return 0xffff;
+ return SENSORS_LIMIT(5400000 / val, 1, 0xfffe);
+}
#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val))
/* Temperature is reported in .001 degC increments */
#define TEMP_TO_REG(val) \
SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
-#define TEMPEXT_FROM_REG(val,ext,scale) \
- SCALE((val)*scale + (ext),scale,1000)
-#define TEMP_FROM_REG(val) \
- TEMPEXT_FROM_REG(val,0,1)
+#define TEMPEXT_FROM_REG(val,ext) \
+ SCALE(((val) << 4) + (ext), 16, 1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
#define PWM_FROM_REG(val) (val)
The structure is dynamically allocated. */
struct lm85_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
enum chips type;
struct mutex update_lock;
u8 tach_mode; /* Register encoding, combined */
u8 temp_ext[3]; /* Decoded values */
u8 in_ext[8]; /* Decoded values */
- u8 adc_scale; /* ADC Extended bits scaling factor */
u8 fan_ppr; /* Register value */
u8 smooth[3]; /* Register encoding */
u8 vid; /* Register value */
/* 4 Fans */
-static ssize_t show_fan(struct device *dev, char *buf, int nr)
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
}
-static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
}
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val);
}
#define show_fan_offset(offset) \
-static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_min(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_min(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \
- NULL); \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_min, set_fan_##offset##_min);
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1)
show_fan_offset(1);
show_fan_offset(2);
static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct lm85_data *data = lm85_update_device(dev);
+ struct lm85_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%ld\n", (long) data->vrm);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
+}
+
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 18);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 16);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 13);
+
/* pwm */
-static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
}
-static ssize_t set_pwm(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
+ *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
int pwm_zone;
}
#define show_pwm_reg(offset) \
-static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_pwm(dev, buf, offset - 1); \
-} \
-static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_pwm(dev, buf, count, offset - 1); \
-} \
-static ssize_t show_pwm_enable##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_pwm_enable(dev, buf, offset - 1); \
-} \
-static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
- show_pwm_##offset, set_pwm_##offset); \
-static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, \
- show_pwm_enable##offset, NULL);
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_pwm, set_pwm, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, \
+ show_pwm_enable, NULL, offset - 1)
show_pwm_reg(1);
show_pwm_reg(2);
/* Voltages */
-static ssize_t show_in(struct device *dev, char *buf, int nr)
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr,
data->in[nr],
- data->in_ext[nr],
- data->adc_scale) );
+ data->in_ext[nr]));
}
-static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
}
-static ssize_t set_in_min(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
}
-static ssize_t set_in_max(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
+
#define show_in_reg(offset) \
-static ssize_t show_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static ssize_t show_in_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_min(dev, buf, offset); \
-} \
-static ssize_t show_in_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_max(dev, buf, offset); \
-} \
-static ssize_t set_in_##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_min(dev, buf, count, offset); \
-} \
-static ssize_t set_in_##offset##_max (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_in_max(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, \
- NULL); \
-static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in_##offset##_min, set_in_##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in_##offset##_max, set_in_##offset##_max);
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset)
show_in_reg(0);
show_in_reg(1);
show_in_reg(2);
show_in_reg(3);
show_in_reg(4);
+show_in_reg(5);
+show_in_reg(6);
+show_in_reg(7);
/* Temps */
-static ssize_t show_temp(struct device *dev, char *buf, int nr)
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
- data->temp_ext[nr],
- data->adc_scale) );
+ data->temp_ext[nr]));
}
-static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
}
-static ssize_t set_temp_min(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
}
-static ssize_t set_temp_max(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
+
#define show_temp_reg(offset) \
-static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp(dev, buf, offset - 1); \
-} \
-static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_min(dev, buf, offset - 1); \
-} \
-static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_max(dev, buf, offset - 1); \
-} \
-static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_min(dev, buf, count, offset - 1); \
-} \
-static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_max(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \
- NULL); \
-static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
- show_temp_##offset##_min, set_temp_##offset##_min); \
-static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
- show_temp_##offset##_max, set_temp_##offset##_max);
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+ show_temp_min, set_temp_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, set_temp_max, offset - 1);
show_temp_reg(1);
show_temp_reg(2);
/* Automatic PWM control */
-static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr)
+static ssize_t show_pwm_auto_channels(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
}
-static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_pwm_auto_channels(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
+
+static ssize_t show_pwm_auto_pwm_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
}
-static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_pwm_auto_pwm_min(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
+
+static ssize_t show_pwm_auto_pwm_minctl(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", data->autofan[nr].min_off);
}
-static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
+
+static ssize_t show_pwm_auto_pwm_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
}
-static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
+
#define pwm_auto(offset) \
-static ssize_t show_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_pwm_auto_channels(dev, buf, offset - 1); \
-} \
-static ssize_t set_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_pwm_auto_channels(dev, buf, count, offset - 1); \
-} \
-static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_pwm_auto_pwm_min(dev, buf, offset - 1); \
-} \
-static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_pwm_auto_pwm_min(dev, buf, count, offset - 1); \
-} \
-static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_pwm_auto_pwm_minctl(dev, buf, offset - 1); \
-} \
-static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1); \
-} \
-static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_pwm_auto_pwm_freq(dev, buf, offset - 1); \
-} \
-static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR, \
- show_pwm##offset##_auto_channels, \
- set_pwm##offset##_auto_channels); \
-static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR, \
- show_pwm##offset##_auto_pwm_min, \
- set_pwm##offset##_auto_pwm_min); \
-static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR, \
- show_pwm##offset##_auto_pwm_minctl, \
- set_pwm##offset##_auto_pwm_minctl); \
-static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR, \
- show_pwm##offset##_auto_pwm_freq, \
- set_pwm##offset##_auto_pwm_freq);
+static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels, \
+ S_IRUGO | S_IWUSR, show_pwm_auto_channels, \
+ set_pwm_auto_channels, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min, \
+ S_IRUGO | S_IWUSR, show_pwm_auto_pwm_min, \
+ set_pwm_auto_pwm_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, \
+ S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl, \
+ set_pwm_auto_pwm_minctl, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_freq, \
+ S_IRUGO | S_IWUSR, show_pwm_auto_pwm_freq, \
+ set_pwm_auto_pwm_freq, offset - 1);
+
pwm_auto(1);
pwm_auto(2);
pwm_auto(3);
/* Temperature settings for automatic PWM control */
-static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr)
+static ssize_t show_temp_auto_temp_off(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
HYST_FROM_REG(data->zone[nr].hyst));
}
-static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_temp_auto_temp_off(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
int min;
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
+
+static ssize_t show_temp_auto_temp_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
}
-static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_temp_auto_temp_min(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
+
+static ssize_t show_temp_auto_temp_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
RANGE_FROM_REG(data->zone[nr].range));
}
-static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_temp_auto_temp_max(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
int min;
mutex_unlock(&data->update_lock);
return count;
}
-static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
+
+static ssize_t show_temp_auto_temp_crit(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct lm85_data *data = lm85_update_device(dev);
return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
}
-static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf,
- size_t count, int nr)
+
+static ssize_t set_temp_auto_temp_crit(struct device *dev,
+ struct device_attribute *attr,const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
mutex_unlock(&data->update_lock);
return count;
}
+
#define temp_auto(offset) \
-static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp_auto_temp_off(dev, buf, offset - 1); \
-} \
-static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_auto_temp_off(dev, buf, count, offset - 1); \
-} \
-static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp_auto_temp_min(dev, buf, offset - 1); \
-} \
-static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_auto_temp_min(dev, buf, count, offset - 1); \
-} \
-static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp_auto_temp_max(dev, buf, offset - 1); \
-} \
-static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_auto_temp_max(dev, buf, count, offset - 1); \
-} \
-static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp_auto_temp_crit(dev, buf, offset - 1); \
-} \
-static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_temp_auto_temp_crit(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR, \
- show_temp##offset##_auto_temp_off, \
- set_temp##offset##_auto_temp_off); \
-static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR, \
- show_temp##offset##_auto_temp_min, \
- set_temp##offset##_auto_temp_min); \
-static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR, \
- show_temp##offset##_auto_temp_max, \
- set_temp##offset##_auto_temp_max); \
-static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR, \
- show_temp##offset##_auto_temp_crit, \
- set_temp##offset##_auto_temp_crit);
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_off, \
+ S_IRUGO | S_IWUSR, show_temp_auto_temp_off, \
+ set_temp_auto_temp_off, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_min, \
+ S_IRUGO | S_IWUSR, show_temp_auto_temp_min, \
+ set_temp_auto_temp_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_max, \
+ S_IRUGO | S_IWUSR, show_temp_auto_temp_max, \
+ set_temp_auto_temp_max, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_crit, \
+ S_IRUGO | S_IWUSR, show_temp_auto_temp_crit, \
+ set_temp_auto_temp_crit, offset - 1);
+
temp_auto(1);
temp_auto(2);
temp_auto(3);
}
static struct attribute *lm85_attributes[] = {
- &dev_attr_fan1_input.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan3_input.attr,
- &dev_attr_fan4_input.attr,
- &dev_attr_fan1_min.attr,
- &dev_attr_fan2_min.attr,
- &dev_attr_fan3_min.attr,
- &dev_attr_fan4_min.attr,
- &dev_attr_pwm1.attr,
- &dev_attr_pwm2.attr,
- &dev_attr_pwm3.attr,
- &dev_attr_pwm1_enable.attr,
- &dev_attr_pwm2_enable.attr,
- &dev_attr_pwm3_enable.attr,
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
- &dev_attr_in3_input.attr,
- &dev_attr_in0_min.attr,
- &dev_attr_in1_min.attr,
- &dev_attr_in2_min.attr,
- &dev_attr_in3_min.attr,
- &dev_attr_in0_max.attr,
- &dev_attr_in1_max.attr,
- &dev_attr_in2_max.attr,
- &dev_attr_in3_max.attr,
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp3_input.attr,
- &dev_attr_temp1_min.attr,
- &dev_attr_temp2_min.attr,
- &dev_attr_temp3_min.attr,
- &dev_attr_temp1_max.attr,
- &dev_attr_temp2_max.attr,
- &dev_attr_temp3_max.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_auto_channels.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_channels.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_pwm_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_pwm_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_pwm_freq.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_temp_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_temp_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_temp_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_temp_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_temp_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_temp_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_temp_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_temp_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_temp_crit.dev_attr.attr,
+
&dev_attr_vrm.attr,
&dev_attr_cpu0_vid.attr,
&dev_attr_alarms.attr,
- &dev_attr_pwm1_auto_channels.attr,
- &dev_attr_pwm2_auto_channels.attr,
- &dev_attr_pwm3_auto_channels.attr,
- &dev_attr_pwm1_auto_pwm_min.attr,
- &dev_attr_pwm2_auto_pwm_min.attr,
- &dev_attr_pwm3_auto_pwm_min.attr,
- &dev_attr_pwm1_auto_pwm_minctl.attr,
- &dev_attr_pwm2_auto_pwm_minctl.attr,
- &dev_attr_pwm3_auto_pwm_minctl.attr,
- &dev_attr_pwm1_auto_pwm_freq.attr,
- &dev_attr_pwm2_auto_pwm_freq.attr,
- &dev_attr_pwm3_auto_pwm_freq.attr,
- &dev_attr_temp1_auto_temp_off.attr,
- &dev_attr_temp2_auto_temp_off.attr,
- &dev_attr_temp3_auto_temp_off.attr,
- &dev_attr_temp1_auto_temp_min.attr,
- &dev_attr_temp2_auto_temp_min.attr,
- &dev_attr_temp3_auto_temp_min.attr,
- &dev_attr_temp1_auto_temp_max.attr,
- &dev_attr_temp2_auto_temp_max.attr,
- &dev_attr_temp3_auto_temp_max.attr,
- &dev_attr_temp1_auto_temp_crit.attr,
- &dev_attr_temp2_auto_temp_crit.attr,
- &dev_attr_temp3_auto_temp_crit.attr,
-
NULL
};
.attrs = lm85_attributes,
};
-static struct attribute *lm85_attributes_opt[] = {
- &dev_attr_in4_input.attr,
- &dev_attr_in4_min.attr,
- &dev_attr_in4_max.attr,
+static struct attribute *lm85_attributes_in4[] = {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group lm85_group_in4 = {
+ .attrs = lm85_attributes_in4,
+};
+static struct attribute *lm85_attributes_in567[] = {
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in6_min.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
NULL
};
-static const struct attribute_group lm85_group_opt = {
- .attrs = lm85_attributes_opt,
+static const struct attribute_group lm85_group_in567 = {
+ .attrs = lm85_attributes_in567,
};
static int lm85_detect(struct i2c_adapter *adapter, int address,
as a sixth digital VID input rather than an analog input. */
data->vid = lm85_read_value(new_client, LM85_REG_VID);
if (!(kind == adt7463 && (data->vid & 0x80)))
- if ((err = device_create_file(&new_client->dev,
- &dev_attr_in4_input))
- || (err = device_create_file(&new_client->dev,
- &dev_attr_in4_min))
- || (err = device_create_file(&new_client->dev,
- &dev_attr_in4_max)))
+ if ((err = sysfs_create_group(&new_client->dev.kobj,
+ &lm85_group_in4)))
goto ERROR3;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ /* The EMC6D100 has 3 additional voltage inputs */
+ if (kind == emc6d100)
+ if ((err = sysfs_create_group(&new_client->dev.kobj,
+ &lm85_group_in567)))
+ goto ERROR3;
+
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR3;
}
/* Error out and cleanup code */
ERROR3:
sysfs_remove_group(&new_client->dev.kobj, &lm85_group);
- sysfs_remove_group(&new_client->dev.kobj, &lm85_group_opt);
+ sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4);
+ if (kind == emc6d100)
+ sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567);
ERROR2:
i2c_detach_client(new_client);
ERROR1:
static int lm85_detach_client(struct i2c_client *client)
{
struct lm85_data *data = i2c_get_clientdata(client);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm85_group);
- sysfs_remove_group(&client->dev.kobj, &lm85_group_opt);
+ sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
+ if (data->type == emc6d100)
+ sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
i2c_detach_client(client);
kfree(data);
return 0;
/* Have to read extended bits first to "freeze" the
* more significant bits that are read later.
+ * There are 2 additional resolution bits per channel and we
+ * have room for 4, so we shift them to the left.
*/
if ( (data->type == adm1027) || (data->type == adt7463) ) {
int ext1 = lm85_read_value(client,
int val = (ext1 << 8) + ext2;
for(i = 0; i <= 4; i++)
- data->in_ext[i] = (val>>(i * 2))&0x03;
+ data->in_ext[i] = ((val>>(i * 2))&0x03) << 2;
for(i = 0; i <= 2; i++)
- data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
+ data->temp_ext[i] = (val>>((i + 4) * 2))&0x0c;
}
- /* adc_scale is 2^(number of LSBs). There are 4 extra bits in
- the emc6d102 and 2 in the adt7463 and adm1027. In all
- other chips ext is always 0 and the value of scale is
- irrelevant. So it is left in 4*/
- data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
-
data->vid = lm85_read_value(client, LM85_REG_VID);
for (i = 0; i <= 3; ++i) {
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
(((val) < 0 ? (val)-500 : (val)+500) / 1000))
#define FAN_FROM_REG(reg,div) ((reg) == 255 || (reg) == 0 ? 0 : \
- 1350000 + (reg)*(div) / 2) / ((reg)*(div))
+ (1350000 + (reg)*(div) / 2) / ((reg)*(div)))
#define FAN_TO_REG(val,div) ((val)*(div) * 255 <= 1350000 ? 255 : \
(1350000 + (val)*(div) / 2) / ((val)*(div)))
#define CHAN_NO_FAN(nr) (1 << (nr))
#define CHAN_TEMP3 (1 << 2)
#define CHAN_VCC_5V (1 << 3)
-#define CHAN_NO_VID (1 << 8)
+#define CHAN_NO_VID (1 << 7)
/*
* Functions declaration
struct lm87_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* In jiffies */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct lm87_data *data = lm87_update_device(dev);
+ struct lm87_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", data->vrm);
}
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
}
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lm87_data *data = lm87_update_device(dev);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15);
+
/*
* Real code
*/
&dev_attr_in1_input.attr,
&dev_attr_in1_min.attr,
&dev_attr_in1_max.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
&dev_attr_in2_input.attr,
&dev_attr_in2_min.attr,
&dev_attr_in2_max.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
&dev_attr_in3_input.attr,
&dev_attr_in3_min.attr,
&dev_attr_in3_max.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
&dev_attr_in4_input.attr,
&dev_attr_in4_min.attr,
&dev_attr_in4_max.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
&dev_attr_temp1_input.attr,
&dev_attr_temp1_max.attr,
&dev_attr_temp1_min.attr,
&dev_attr_temp1_crit.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
&dev_attr_temp2_input.attr,
&dev_attr_temp2_max.attr,
&dev_attr_temp2_min.attr,
&dev_attr_temp2_crit.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_aout_output.attr,
&dev_attr_in6_input.attr,
&dev_attr_in6_min.attr,
&dev_attr_in6_max.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
&dev_attr_fan1_input.attr,
&dev_attr_fan1_min.attr,
&dev_attr_fan1_div.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
&dev_attr_in7_input.attr,
&dev_attr_in7_min.attr,
&dev_attr_in7_max.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
&dev_attr_fan2_input.attr,
&dev_attr_fan2_min.attr,
&dev_attr_fan2_div.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
&dev_attr_temp3_input.attr,
&dev_attr_temp3_max.attr,
&dev_attr_temp3_min.attr,
&dev_attr_temp3_crit.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
&dev_attr_in0_input.attr,
&dev_attr_in0_min.attr,
&dev_attr_in0_max.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
&dev_attr_in5_input.attr,
&dev_attr_in5_min.attr,
&dev_attr_in5_max.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
&dev_attr_cpu0_vid.attr,
&dev_attr_vrm.attr,
|| (err = device_create_file(&new_client->dev,
&dev_attr_in6_min))
|| (err = device_create_file(&new_client->dev,
- &dev_attr_in6_max)))
+ &dev_attr_in6_max))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_in6_alarm.dev_attr)))
goto exit_remove;
} else {
if ((err = device_create_file(&new_client->dev,
|| (err = device_create_file(&new_client->dev,
&dev_attr_fan1_min))
|| (err = device_create_file(&new_client->dev,
- &dev_attr_fan1_div)))
+ &dev_attr_fan1_div))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_alarm.dev_attr)))
goto exit_remove;
}
|| (err = device_create_file(&new_client->dev,
&dev_attr_in7_min))
|| (err = device_create_file(&new_client->dev,
- &dev_attr_in7_max)))
+ &dev_attr_in7_max))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_in7_alarm.dev_attr)))
goto exit_remove;
} else {
if ((err = device_create_file(&new_client->dev,
|| (err = device_create_file(&new_client->dev,
&dev_attr_fan2_min))
|| (err = device_create_file(&new_client->dev,
- &dev_attr_fan2_div)))
+ &dev_attr_fan2_div))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_alarm.dev_attr)))
goto exit_remove;
}
|| (err = device_create_file(&new_client->dev,
&dev_attr_temp3_min))
|| (err = device_create_file(&new_client->dev,
- &dev_attr_temp3_crit)))
+ &dev_attr_temp3_crit))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp3_alarm.dev_attr))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp3_fault.dev_attr)))
goto exit_remove;
} else {
if ((err = device_create_file(&new_client->dev,
&dev_attr_in0_min))
|| (err = device_create_file(&new_client->dev,
&dev_attr_in0_max))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_in0_alarm.dev_attr))
|| (err = device_create_file(&new_client->dev,
&dev_attr_in5_input))
|| (err = device_create_file(&new_client->dev,
&dev_attr_in5_min))
|| (err = device_create_file(&new_client->dev,
- &dev_attr_in5_max)))
+ &dev_attr_in5_max))
+ || (err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_in5_alarm.dev_attr)))
goto exit_remove;
}
goto exit_remove;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
struct lm87_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm87_group);
sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
* http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Note that there is no easy way to differentiate between the three
* variants. The extra address and features of the MAX6659 are not
- * supported by this driver.
+ * supported by this driver. These chips lack the remote temperature
+ * offset feature.
*
* This driver also supports the MAX6680 and MAX6681, two other sensor
* chips made by Maxim. These are quite similar to the other Maxim
struct lm90_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
2: local high limit
3: local critical limit
4: remote critical limit */
- s16 temp11[3]; /* 0: remote input
+ s16 temp11[4]; /* 0: remote input
1: remote low limit
- 2: remote high limit */
+ 2: remote high limit
+ 3: remote offset (except max6657) */
u8 temp_hyst;
u8 alarms; /* bitvector */
};
static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
{
- static const u8 reg[4] = {
+ static const u8 reg[6] = {
LM90_REG_W_REMOTE_LOWH,
LM90_REG_W_REMOTE_LOWL,
LM90_REG_W_REMOTE_HIGHH,
LM90_REG_W_REMOTE_HIGHL,
+ LM90_REG_W_REMOTE_OFFSH,
+ LM90_REG_W_REMOTE_OFFSL,
};
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
set_temphyst, 3);
static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_temp11,
+ set_temp11, 3);
/* Individual alarm files */
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
&dev_attr_pec)))
goto exit_remove_files;
}
+ if (data->kind != max6657) {
+ if ((err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_offset.dev_attr)))
+ goto exit_remove_files;
+ }
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct lm90_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm90_group);
device_remove_file(&client->dev, &dev_attr_pec);
+ if (data->kind != max6657)
+ device_remove_file(&client->dev,
+ &sensor_dev_attr_temp2_offset.dev_attr);
if ((err = i2c_detach_client(client)))
return err;
if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &newh) == 0
&& lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0)
data->temp11[2] = (newh << 8) | l;
+ if (data->kind != max6657) {
+ if (lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSH,
+ &newh) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
+ &l) == 0)
+ data->temp11[3] = (newh << 8) | l;
+ }
lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
data->last_updated = jiffies;
/* Client data (each client gets its own) */
struct lm92_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
struct lm92_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm92_group);
if ((err = i2c_detach_client(client)))
*/
struct lm93_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
/* TEMP: 1/1000 degrees C (-128C to +127C)
REG: 1C/bit, two's complement */
-static u8 LM93_TEMP_TO_REG(int temp)
+static u8 LM93_TEMP_TO_REG(long temp)
{
int ntemp = SENSORS_LIMIT(temp, LM93_TEMP_MIN, LM93_TEMP_MAX);
ntemp += (ntemp<0 ? -500 : 500);
int nr = (to_sensor_dev_attr(attr))->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm93_data *data = i2c_get_clientdata(client);
- u32 val = simple_strtoul(buf, NULL, 10);
+ long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_lim[nr].min = LM93_TEMP_TO_REG(val);
int nr = (to_sensor_dev_attr(attr))->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm93_data *data = i2c_get_clientdata(client);
- u32 val = simple_strtoul(buf, NULL, 10);
+ long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_lim[nr].max = LM93_TEMP_TO_REG(val);
int nr = (to_sensor_dev_attr(attr))->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm93_data *data = i2c_get_clientdata(client);
- u32 val = simple_strtoul(buf, NULL, 10);
+ long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->block10.base[nr] = LM93_TEMP_TO_REG(val);
int nr = (to_sensor_dev_attr(attr))->index;
struct i2c_client *client = to_i2c_client(dev);
struct lm93_data *data = i2c_get_clientdata(client);
- u32 val = simple_strtoul(buf, NULL, 10);
+ long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->boost[nr] = LM93_TEMP_TO_REG(val);
return sprintf(buf,"%d\n",LM93_VID_FROM_REG(data->vid[nr]));
}
-static SENSOR_DEVICE_ATTR(vid1, S_IRUGO, show_vid, NULL, 0);
-static SENSOR_DEVICE_ATTR(vid2, S_IRUGO, show_vid, NULL, 1);
+static SENSOR_DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL, 0);
+static SENSOR_DEVICE_ATTR(cpu1_vid, S_IRUGO, show_vid, NULL, 1);
static ssize_t show_prochot(struct device *dev, struct device_attribute *attr,
char *buf)
&sensor_dev_attr_pwm2_auto_spinup_time.dev_attr.attr,
&dev_attr_pwm_auto_prochot_ramp.attr,
&dev_attr_pwm_auto_vrdhot_ramp.attr,
- &sensor_dev_attr_vid1.dev_attr.attr,
- &sensor_dev_attr_vid2.dev_attr.attr,
+ &sensor_dev_attr_cpu0_vid.dev_attr.attr,
+ &sensor_dev_attr_cpu1_vid.dev_attr.attr,
&sensor_dev_attr_prochot1.dev_attr.attr,
&sensor_dev_attr_prochot2.dev_attr.attr,
&sensor_dev_attr_prochot1_avg.dev_attr.attr,
goto err_detach;
/* Register hwmon driver class */
- data->class_dev = hwmon_device_register(&client->dev);
- if ( !IS_ERR(data->class_dev))
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if ( !IS_ERR(data->hwmon_dev))
return 0;
- err = PTR_ERR(data->class_dev);
+ err = PTR_ERR(data->hwmon_dev);
dev_err(&client->dev, "error registering hwmon device.\n");
sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
err_detach:
struct lm93_data *data = i2c_get_clientdata(client);
int err = 0;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
err = i2c_detach_client(client);
struct max1619_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct max1619_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &max1619_group);
if ((err = i2c_detach_client(client)))
struct max6650_data
{
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
if (err)
goto err_detach;
- data->class_dev = hwmon_device_register(&client->dev);
- if (!IS_ERR(data->class_dev))
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (!IS_ERR(data->hwmon_dev))
return 0;
- err = PTR_ERR(data->class_dev);
+ err = PTR_ERR(data->hwmon_dev);
dev_err(&client->dev, "error registering hwmon device.\n");
sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
err_detach:
int err;
sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
err = i2c_detach_client(client);
if (!err)
kfree(data);
struct pc87360_data {
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct pc87360_data *data = pc87360_update_device(dev);
+ struct pc87360_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
if ((err = device_create_file(dev, &dev_attr_name)))
goto ERROR3;
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR3;
}
return 0;
struct pc87360_data *data = platform_get_drvdata(pdev);
int i;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&pdev->dev, &dev_attr_name);
sysfs_remove_group(&pdev->dev.kobj, &pc8736x_temp_group);
device is using banked registers) and the register cache (needed to keep
the data in the registers and the cache in sync at any time). */
struct pc87427_data {
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
int address[2];
const char *name;
goto exit_remove_files;
}
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
goto exit_remove_files;
}
struct resource *res;
int i;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&pdev->dev, &dev_attr_name);
for (i = 0; i < 8; i++) {
if (!(data->fan_enabled & (1 << i)))
struct sis5595_data {
unsigned short addr;
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
struct mutex update_lock;
platform_set_drvdata(pdev, data);
/* Check revision and pin registers to determine whether 4 or 5 voltages */
- pci_read_config_byte(s_bridge, PCI_REVISION_ID, &data->revision);
+ data->revision = s_bridge->revision;
/* 4 voltages, 1 temp */
data->maxins = 3;
if (data->revision >= REV2MIN) {
goto exit_remove_files;
}
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
{
struct sis5595_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_opt);
int *i;
for (i = blacklist; *i != 0; i++) {
- struct pci_dev *dev;
- dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
- if (dev) {
- dev_err(&dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
- pci_dev_put(dev);
+ struct pci_dev *d;
+ if ((d = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL))) {
+ dev_err(&d->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
+ pci_dev_put(d);
return -ENODEV;
}
}
struct smsc47b397_data {
unsigned short addr;
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
struct mutex update_lock;
struct smsc47b397_data *data = platform_get_drvdata(pdev);
struct resource *res;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &smsc47b397_group);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
release_region(res->start, SMSC_EXTENT);
if ((err = sysfs_create_group(&dev->kobj, &smsc47b397_group)))
goto error_free;
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto error_remove;
}
unsigned short addr;
const char *name;
enum chips type;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
|| (err = device_create_file(dev,
&sensor_dev_attr_fan3_div.dev_attr)))
goto error_remove_files;
- } else
+ } else if (data->type == smsc47m2)
dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
if (pwm1) {
|| (err = device_create_file(dev,
&sensor_dev_attr_pwm3_enable.dev_attr)))
goto error_remove_files;
- } else
+ } else if (data->type == smsc47m2)
dev_dbg(dev, "PWM 3 not enabled by hardware, skipping\n");
if ((err = device_create_file(dev, &dev_attr_alarms)))
if ((err = device_create_file(dev, &dev_attr_name)))
goto error_remove_files;
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto error_remove_files;
}
struct smsc47m1_data *data = platform_get_drvdata(pdev);
struct resource *res;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
struct smsc47m192_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct smsc47m192_data *data = smsc47m192_update_device(dev);
+ struct smsc47m192_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", data->vrm);
}
goto exit_remove_files;
}
- data->class_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
struct smsc47m192_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &smsc47m192_group);
sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4);
#define THMC50_REG_COMPANY_ID 0x3E
#define THMC50_REG_DIE_CODE 0x3F
#define THMC50_REG_ANALOG_OUT 0x19
+/*
+ * The mirror status register cannot be used as
+ * reading it does not clear alarms.
+ */
+#define THMC50_REG_INTR 0x41
const static u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
const static u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
/* Each client has this additional data */
struct thmc50_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
enum chips type;
s8 temp_max[3];
s8 temp_min[3];
u8 analog_out;
+ u8 alarms;
};
static int thmc50_attach_adapter(struct i2c_adapter *adapter);
return count;
}
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ struct thmc50_data *data = thmc50_update_device(dev);
+
+ return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
+}
+
#define temp_reg(offset) \
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \
NULL, offset - 1); \
temp_reg(2);
temp_reg(3);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
+
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out,
set_analog_out, 0);
static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
NULL
};
/* for ADM1022 3rd temperature mode */
-static struct attribute *adm1022_attributes[] = {
+static struct attribute *temp3_attributes[] = {
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
NULL
};
-static const struct attribute_group adm1022_group = {
- .attrs = adm1022_attributes,
+static const struct attribute_group temp3_group = {
+ .attrs = temp3_attributes,
};
static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind)
struct thmc50_data *data;
struct device *dev;
int err = 0;
- const char *type_name = "";
+ const char *type_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("thmc50: detect failed, "
pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
goto exit_free;
}
- pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
- type_name, (revision >> 4) - 0xc, revision & 0xf);
data->type = kind;
- if (kind == thmc50)
- type_name = "thmc50";
- else if (kind == adm1022) {
+ if (kind == adm1022) {
int id = i2c_adapter_id(client->adapter);
int i;
data->has_temp3 = 1;
break;
}
+ } else {
+ type_name = "thmc50";
}
+ pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
+ type_name, (revision >> 4) - 0xc, revision & 0xf);
/* Fill in the remaining client fields & put it into the global list */
strlcpy(client->name, type_name, I2C_NAME_SIZE);
goto exit_detach;
/* Register ADM1022 sysfs hooks */
- if (data->type == adm1022)
+ if (data->has_temp3)
if ((err = sysfs_create_group(&client->dev.kobj,
- &adm1022_group)))
+ &temp3_group)))
goto exit_remove_sysfs_thmc50;
/* Register a new directory entry with module sensors */
- data->class_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_sysfs;
}
return 0;
exit_remove_sysfs:
- if (data->type == adm1022)
- sysfs_remove_group(&client->dev.kobj, &adm1022_group);
+ if (data->has_temp3)
+ sysfs_remove_group(&client->dev.kobj, &temp3_group);
exit_remove_sysfs_thmc50:
sysfs_remove_group(&client->dev.kobj, &thmc50_group);
exit_detach:
struct thmc50_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &thmc50_group);
- if (data->type == adm1022)
- sysfs_remove_group(&client->dev.kobj, &adm1022_group);
+ if (data->has_temp3)
+ sysfs_remove_group(&client->dev.kobj, &temp3_group);
if ((err = i2c_detach_client(client)))
return err;
}
data->analog_out =
i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
+ data->alarms =
+ i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
data->last_updated = jiffies;
data->valid = 1;
}
struct via686a_data {
unsigned short addr;
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
if ((err = sysfs_create_group(&pdev->dev.kobj, &via686a_group)))
goto exit_free;
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
{
struct via686a_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &via686a_group);
release_region(data->addr, VIA686A_EXTENT);
struct vt1211_data {
unsigned short addr;
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
}
/* Register device */
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
dev_err(dev, "Class registration failed (%d)\n", err);
goto EXIT_DEV_REMOVE_SILENT;
}
struct vt1211_data *data = platform_get_drvdata(pdev);
struct resource *res;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
vt1211_remove_sysfs(pdev);
platform_set_drvdata(pdev, NULL);
kfree(data);
const char *name;
struct mutex update_lock;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
.probe = vt8231_pci_probe,
};
-int vt8231_probe(struct platform_device *pdev)
+static int vt8231_probe(struct platform_device *pdev)
{
struct resource *res;
struct vt8231_data *data;
}
}
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
return 0;
struct vt8231_data *data = platform_get_drvdata(pdev);
int i;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
}
static inline s8
-temp1_to_reg(int temp, int min, int max)
+temp1_to_reg(long temp, int min, int max)
{
if (temp <= min)
return min / 1000;
int addr; /* IO base of hw monitor block */
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
struct mutex update_lock;
const char *buf, size_t count) \
{ \
struct w83627ehf_data *data = dev_get_drvdata(dev); \
- u32 val = simple_strtoul(buf, NULL, 10); \
+ long val = simple_strtol(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->temp1_##reg = temp1_to_reg(val, -128000, 127000); \
struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
- u32 val = simple_strtoul(buf, NULL, 10); \
+ long val = simple_strtol(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
goto exit_remove;
}
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
{
struct w83627ehf_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
w83627ehf_device_remove_files(&pdev->dev);
release_region(data->addr, IOREGION_LENGTH);
platform_set_drvdata(pdev, NULL);
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
W83627THF_REG_PWM3 };
#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
- regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
+ regpwm_627hf[nr] : regpwm[nr])
#define W83627HF_REG_PWM_FREQ 0x5C /* Only for the 627HF */
/* TEMP: 0.001C/bit (-128C to +127C)
REG: 1C/bit, two's complement */
-static u8 TEMP_TO_REG(int temp)
+static u8 TEMP_TO_REG(long temp)
{
int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
ntemp += (ntemp<0 ? -500 : 500);
struct w83627hf_data {
unsigned short addr;
const char *name;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
enum chips type;
u8 beep_enable; /* Boolean */
u8 pwm[3]; /* Register value */
u8 pwm_freq[3]; /* Register value */
- u16 sens[3]; /* 782D/783S only.
- 1 = pentium diode; 2 = 3904 diode;
- 3000-5000 = thermistor beta.
- Default = 3435.
- Other Betas unimplemented */
+ u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode;
+ 4 = thermistor */
u8 vrm;
u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
};
static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
+static void w83627hf_update_fan_div(struct w83627hf_data *data);
static struct w83627hf_data *w83627hf_update_device(struct device *dev);
static void w83627hf_init_device(struct platform_device *pdev);
.remove = __devexit_p(w83627hf_remove),
};
-/* following are the sysfs callback functions */
-#define show_in_reg(reg) \
-static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
-{ \
- struct w83627hf_data *data = w83627hf_update_device(dev); \
- return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \
+static ssize_t
+show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr]));
}
-show_in_reg(in)
-show_in_reg(in_min)
-show_in_reg(in_max)
-
-#define store_in_reg(REG, reg) \
-static ssize_t \
-store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
-{ \
- struct w83627hf_data *data = dev_get_drvdata(dev); \
- u32 val; \
- \
- val = simple_strtoul(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->in_##reg[nr] = IN_TO_REG(val); \
- w83627hf_write_value(data, W83781D_REG_IN_##REG(nr), \
- data->in_##reg[nr]); \
- \
- mutex_unlock(&data->update_lock); \
- return count; \
+static ssize_t
+show_in_min(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr]));
}
-store_in_reg(MIN, min)
-store_in_reg(MAX, max)
+static ssize_t
+show_in_max(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr]));
+}
+static ssize_t
+store_in_min(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
-#define sysfs_in_offset(offset) \
-static ssize_t \
-show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
+ mutex_lock(&data->update_lock);
+ data->in_min[nr] = IN_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t
+store_in_max(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
-#define sysfs_in_reg_offset(reg, offset) \
-static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_##reg (dev, buf, offset); \
-} \
-static ssize_t \
-store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_in_##reg (dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \
- show_regs_in_##reg##offset, store_regs_in_##reg##offset);
-
-#define sysfs_in_offsets(offset) \
-sysfs_in_offset(offset) \
-sysfs_in_reg_offset(min, offset) \
-sysfs_in_reg_offset(max, offset)
-
-sysfs_in_offsets(1);
-sysfs_in_offsets(2);
-sysfs_in_offsets(3);
-sysfs_in_offsets(4);
-sysfs_in_offsets(5);
-sysfs_in_offsets(6);
-sysfs_in_offsets(7);
-sysfs_in_offsets(8);
+ mutex_lock(&data->update_lock);
+ data->in_max[nr] = IN_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+#define sysfs_vin_decl(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in_input, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR, \
+ show_in_min, store_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR, \
+ show_in_max, store_in_max, offset);
+
+sysfs_vin_decl(1);
+sysfs_vin_decl(2);
+sysfs_vin_decl(3);
+sysfs_vin_decl(4);
+sysfs_vin_decl(5);
+sysfs_vin_decl(6);
+sysfs_vin_decl(7);
+sysfs_vin_decl(8);
/* use a different set of functions for in0 */
static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
show_regs_in_max0, store_regs_in_max0);
-#define show_fan_reg(reg) \
-static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
-{ \
- struct w83627hf_data *data = w83627hf_update_device(dev); \
- return sprintf(buf,"%ld\n", \
- FAN_FROM_REG(data->reg[nr-1], \
- (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+static ssize_t
+show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr],
+ (long)DIV_FROM_REG(data->fan_div[nr])));
}
-show_fan_reg(fan);
-show_fan_reg(fan_min);
-
static ssize_t
-store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr],
+ (long)DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val;
-
- val = simple_strtoul(buf, NULL, 10);
+ u32 val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->fan_min[nr - 1] =
- FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
- w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr),
- data->fan_min[nr - 1]);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr+1),
+ data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
+#define sysfs_fan_decl(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan_input, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, store_fan_min, offset - 1);
-#define sysfs_fan_offset(offset) \
-static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan(dev, buf, offset); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
+sysfs_fan_decl(1);
+sysfs_fan_decl(2);
+sysfs_fan_decl(3);
-#define sysfs_fan_min_offset(offset) \
-static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_min(dev, buf, offset); \
-} \
-static ssize_t \
-store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_fan_min(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_regs_fan_min##offset, store_regs_fan_min##offset);
-
-sysfs_fan_offset(1);
-sysfs_fan_min_offset(1);
-sysfs_fan_offset(2);
-sysfs_fan_min_offset(2);
-sysfs_fan_offset(3);
-sysfs_fan_min_offset(3);
-
-#define show_temp_reg(reg) \
-static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
-{ \
- struct w83627hf_data *data = w83627hf_update_device(dev); \
- if (nr >= 2) { /* TEMP2 and TEMP3 */ \
- return sprintf(buf,"%ld\n", \
- (long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
- } else { /* TEMP1 */ \
- return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
- } \
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ if (nr >= 2) { /* TEMP2 and TEMP3 */
+ return sprintf(buf, "%ld\n",
+ (long)LM75_TEMP_FROM_REG(data->temp_add[nr-2]));
+ } else { /* TEMP1 */
+ return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->temp));
+ }
}
-show_temp_reg(temp);
-show_temp_reg(temp_max);
-show_temp_reg(temp_max_hyst);
-#define store_temp_reg(REG, reg) \
-static ssize_t \
-store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
-{ \
- struct w83627hf_data *data = dev_get_drvdata(dev); \
- u32 val; \
- \
- val = simple_strtoul(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- \
- if (nr >= 2) { /* TEMP2 and TEMP3 */ \
- data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
- w83627hf_write_value(data, W83781D_REG_TEMP_##REG(nr), \
- data->temp_##reg##_add[nr-2]); \
- } else { /* TEMP1 */ \
- data->temp_##reg = TEMP_TO_REG(val); \
- w83627hf_write_value(data, W83781D_REG_TEMP_##REG(nr), \
- data->temp_##reg); \
- } \
- \
- mutex_unlock(&data->update_lock); \
- return count; \
+static ssize_t
+show_temp_max(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ if (nr >= 2) { /* TEMP2 and TEMP3 */
+ return sprintf(buf, "%ld\n",
+ (long)LM75_TEMP_FROM_REG(data->temp_max_add[nr-2]));
+ } else { /* TEMP1 */
+ return sprintf(buf, "%ld\n",
+ (long)TEMP_FROM_REG(data->temp_max));
+ }
}
-store_temp_reg(OVER, max);
-store_temp_reg(HYST, max_hyst);
-#define sysfs_temp_offset(offset) \
-static ssize_t \
-show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp(dev, buf, offset); \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
+static ssize_t
+show_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ if (nr >= 2) { /* TEMP2 and TEMP3 */
+ return sprintf(buf, "%ld\n",
+ (long)LM75_TEMP_FROM_REG(data->temp_max_hyst_add[nr-2]));
+ } else { /* TEMP1 */
+ return sprintf(buf, "%ld\n",
+ (long)TEMP_FROM_REG(data->temp_max_hyst));
+ }
+}
-#define sysfs_temp_reg_offset(reg, offset) \
-static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_##reg (dev, buf, offset); \
-} \
-static ssize_t \
-store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_temp_##reg (dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
- show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
+static ssize_t
+store_temp_max(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
-#define sysfs_temp_offsets(offset) \
-sysfs_temp_offset(offset) \
-sysfs_temp_reg_offset(max, offset) \
-sysfs_temp_reg_offset(max_hyst, offset)
+ mutex_lock(&data->update_lock);
-sysfs_temp_offsets(1);
-sysfs_temp_offsets(2);
-sysfs_temp_offsets(3);
+ if (nr >= 2) { /* TEMP2 and TEMP3 */
+ data->temp_max_add[nr-2] = LM75_TEMP_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_TEMP_OVER(nr),
+ data->temp_max_add[nr-2]);
+ } else { /* TEMP1 */
+ data->temp_max = TEMP_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_TEMP_OVER(nr),
+ data->temp_max);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+store_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+
+ if (nr >= 2) { /* TEMP2 and TEMP3 */
+ data->temp_max_hyst_add[nr-2] = LM75_TEMP_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_TEMP_HYST(nr),
+ data->temp_max_hyst_add[nr-2]);
+ } else { /* TEMP1 */
+ data->temp_max_hyst = TEMP_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_TEMP_HYST(nr),
+ data->temp_max_hyst);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define sysfs_temp_decl(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR, \
+ show_temp_max, store_temp_max, offset); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR, \
+ show_temp_max_hyst, store_temp_max_hyst, offset);
+
+sysfs_temp_decl(1);
+sysfs_temp_decl(2);
+sysfs_temp_decl(3);
static ssize_t
show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct w83627hf_data *data = w83627hf_update_device(dev);
+ struct w83627hf_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%ld\n", (long) data->vrm);
}
static ssize_t
sysfs_beep(MASK, mask);
static ssize_t
-show_fan_div_reg(struct device *dev, char *buf, int nr)
+show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = w83627hf_update_device(dev);
return sprintf(buf, "%ld\n",
- (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+ (long) DIV_FROM_REG(data->fan_div[nr]));
}
-
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t
-store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_fan_div(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
unsigned long min;
u8 reg;
return count;
}
-#define sysfs_fan_div(offset) \
-static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_div_reg(dev, buf, offset); \
-} \
-static ssize_t \
-store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_fan_div_reg(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
- show_regs_fan_div_##offset, store_regs_fan_div_##offset);
-
-sysfs_fan_div(1);
-sysfs_fan_div(2);
-sysfs_fan_div(3);
+static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR,
+ show_fan_div, store_fan_div, 0);
+static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR,
+ show_fan_div, store_fan_div, 1);
+static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR,
+ show_fan_div, store_fan_div, 2);
static ssize_t
-show_pwm_reg(struct device *dev, char *buf, int nr)
+show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = w83627hf_update_device(dev);
- return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]);
+ return sprintf(buf, "%ld\n", (long) data->pwm[nr]);
}
static ssize_t
-store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_pwm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val;
-
- val = simple_strtoul(buf, NULL, 10);
+ u32 val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
if (data->type == w83627thf) {
/* bits 0-3 are reserved in 627THF */
- data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0;
+ data->pwm[nr] = PWM_TO_REG(val) & 0xf0;
w83627hf_write_value(data,
W836X7HF_REG_PWM(data->type, nr),
- data->pwm[nr - 1] |
+ data->pwm[nr] |
(w83627hf_read_value(data,
W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
} else {
- data->pwm[nr - 1] = PWM_TO_REG(val);
+ data->pwm[nr] = PWM_TO_REG(val);
w83627hf_write_value(data,
W836X7HF_REG_PWM(data->type, nr),
- data->pwm[nr - 1]);
+ data->pwm[nr]);
}
mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_pwm(offset) \
-static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_pwm_reg(dev, buf, offset); \
-} \
-static ssize_t \
-store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_pwm_reg(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
- show_regs_pwm_##offset, store_regs_pwm_##offset);
-
-sysfs_pwm(1);
-sysfs_pwm(2);
-sysfs_pwm(3);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
static ssize_t
-show_pwm_freq_reg(struct device *dev, char *buf, int nr)
+show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = w83627hf_update_device(dev);
if (data->type == w83627hf)
return sprintf(buf, "%ld\n",
- pwm_freq_from_reg_627hf(data->pwm_freq[nr - 1]));
+ pwm_freq_from_reg_627hf(data->pwm_freq[nr]));
else
return sprintf(buf, "%ld\n",
- pwm_freq_from_reg(data->pwm_freq[nr - 1]));
+ pwm_freq_from_reg(data->pwm_freq[nr]));
}
static ssize_t
-store_pwm_freq_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_pwm_freq(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
static const u8 mask[]={0xF8, 0x8F};
u32 val;
mutex_lock(&data->update_lock);
if (data->type == w83627hf) {
- data->pwm_freq[nr - 1] = pwm_freq_to_reg_627hf(val);
+ data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val);
w83627hf_write_value(data, W83627HF_REG_PWM_FREQ,
- (data->pwm_freq[nr - 1] << ((nr - 1)*4)) |
+ (data->pwm_freq[nr] << (nr*4)) |
(w83627hf_read_value(data,
- W83627HF_REG_PWM_FREQ) & mask[nr - 1]));
+ W83627HF_REG_PWM_FREQ) & mask[nr]));
} else {
- data->pwm_freq[nr - 1] = pwm_freq_to_reg(val);
- w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr - 1],
- data->pwm_freq[nr - 1]);
+ data->pwm_freq[nr] = pwm_freq_to_reg(val);
+ w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr],
+ data->pwm_freq[nr]);
}
mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_pwm_freq(offset) \
-static ssize_t show_regs_pwm_freq_##offset(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- return show_pwm_freq_reg(dev, buf, offset); \
-} \
-static ssize_t \
-store_regs_pwm_freq_##offset(struct device *dev, \
- struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_pwm_freq_reg(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \
- show_regs_pwm_freq_##offset, store_regs_pwm_freq_##offset);
-
-sysfs_pwm_freq(1);
-sysfs_pwm_freq(2);
-sysfs_pwm_freq(3);
+static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR,
+ show_pwm_freq, store_pwm_freq, 0);
+static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR,
+ show_pwm_freq, store_pwm_freq, 1);
+static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR,
+ show_pwm_freq, store_pwm_freq, 2);
static ssize_t
-show_sensor_reg(struct device *dev, char *buf, int nr)
+show_temp_type(struct device *dev, struct device_attribute *devattr,
+ char *buf)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = w83627hf_update_device(dev);
- return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+ return sprintf(buf, "%ld\n", (long) data->sens[nr]);
}
static ssize_t
-store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_temp_type(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
u32 val, tmp;
case 1: /* PII/Celeron diode */
tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
w83627hf_write_value(data, W83781D_REG_SCFG1,
- tmp | BIT_SCFG1[nr - 1]);
+ tmp | BIT_SCFG1[nr]);
tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
w83627hf_write_value(data, W83781D_REG_SCFG2,
- tmp | BIT_SCFG2[nr - 1]);
- data->sens[nr - 1] = val;
+ tmp | BIT_SCFG2[nr]);
+ data->sens[nr] = val;
break;
case 2: /* 3904 */
tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
w83627hf_write_value(data, W83781D_REG_SCFG1,
- tmp | BIT_SCFG1[nr - 1]);
+ tmp | BIT_SCFG1[nr]);
tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
w83627hf_write_value(data, W83781D_REG_SCFG2,
- tmp & ~BIT_SCFG2[nr - 1]);
- data->sens[nr - 1] = val;
+ tmp & ~BIT_SCFG2[nr]);
+ data->sens[nr] = val;
break;
- case W83781D_DEFAULT_BETA: /* thermistor */
+ case W83781D_DEFAULT_BETA:
+ dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
+ "instead\n", W83781D_DEFAULT_BETA);
+ /* fall through */
+ case 4: /* thermistor */
tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
w83627hf_write_value(data, W83781D_REG_SCFG1,
- tmp & ~BIT_SCFG1[nr - 1]);
- data->sens[nr - 1] = val;
+ tmp & ~BIT_SCFG1[nr]);
+ data->sens[nr] = val;
break;
default:
dev_err(dev,
- "Invalid sensor type %ld; must be 1, 2, or %d\n",
- (long) val, W83781D_DEFAULT_BETA);
+ "Invalid sensor type %ld; must be 1, 2, or 4\n",
+ (long) val);
break;
}
return count;
}
-#define sysfs_sensor(offset) \
-static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_sensor_reg(dev, buf, offset); \
-} \
-static ssize_t \
-store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_sensor_reg(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
- show_regs_sensor_##offset, store_regs_sensor_##offset);
+#define sysfs_temp_type(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
+ show_temp_type, store_temp_type, offset - 1);
-sysfs_sensor(1);
-sysfs_sensor(2);
-sysfs_sensor(3);
+sysfs_temp_type(1);
+sysfs_temp_type(2);
+sysfs_temp_type(3);
-static ssize_t show_name(struct device *dev, struct device_attribute
- *devattr, char *buf)
+static ssize_t
+show_name(struct device *dev, struct device_attribute *devattr, char *buf)
{
struct w83627hf_data *data = dev_get_drvdata(dev);
return err;
}
+#define VIN_UNIT_ATTRS(_X_) \
+ &sensor_dev_attr_in##_X_##_input.dev_attr.attr, \
+ &sensor_dev_attr_in##_X_##_min.dev_attr.attr, \
+ &sensor_dev_attr_in##_X_##_max.dev_attr.attr
+
+#define FAN_UNIT_ATTRS(_X_) \
+ &sensor_dev_attr_fan##_X_##_input.dev_attr.attr, \
+ &sensor_dev_attr_fan##_X_##_min.dev_attr.attr, \
+ &sensor_dev_attr_fan##_X_##_div.dev_attr.attr
+
+#define TEMP_UNIT_ATTRS(_X_) \
+ &sensor_dev_attr_temp##_X_##_input.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_max.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_type.dev_attr.attr
+
static struct attribute *w83627hf_attributes[] = {
&dev_attr_in0_input.attr,
&dev_attr_in0_min.attr,
&dev_attr_in0_max.attr,
- &dev_attr_in2_input.attr,
- &dev_attr_in2_min.attr,
- &dev_attr_in2_max.attr,
- &dev_attr_in3_input.attr,
- &dev_attr_in3_min.attr,
- &dev_attr_in3_max.attr,
- &dev_attr_in4_input.attr,
- &dev_attr_in4_min.attr,
- &dev_attr_in4_max.attr,
- &dev_attr_in7_input.attr,
- &dev_attr_in7_min.attr,
- &dev_attr_in7_max.attr,
- &dev_attr_in8_input.attr,
- &dev_attr_in8_min.attr,
- &dev_attr_in8_max.attr,
-
- &dev_attr_fan1_input.attr,
- &dev_attr_fan1_min.attr,
- &dev_attr_fan1_div.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan2_min.attr,
- &dev_attr_fan2_div.attr,
-
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_max.attr,
- &dev_attr_temp1_max_hyst.attr,
- &dev_attr_temp1_type.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp2_max.attr,
- &dev_attr_temp2_max_hyst.attr,
- &dev_attr_temp2_type.attr,
+ VIN_UNIT_ATTRS(2),
+ VIN_UNIT_ATTRS(3),
+ VIN_UNIT_ATTRS(4),
+ VIN_UNIT_ATTRS(7),
+ VIN_UNIT_ATTRS(8),
+
+ FAN_UNIT_ATTRS(1),
+ FAN_UNIT_ATTRS(2),
+
+ TEMP_UNIT_ATTRS(1),
+ TEMP_UNIT_ATTRS(2),
&dev_attr_alarms.attr,
&dev_attr_beep_enable.attr,
&dev_attr_beep_mask.attr,
- &dev_attr_pwm1.attr,
- &dev_attr_pwm2.attr,
-
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
&dev_attr_name.attr,
NULL
};
};
static struct attribute *w83627hf_attributes_opt[] = {
- &dev_attr_in1_input.attr,
- &dev_attr_in1_min.attr,
- &dev_attr_in1_max.attr,
- &dev_attr_in5_input.attr,
- &dev_attr_in5_min.attr,
- &dev_attr_in5_max.attr,
- &dev_attr_in6_input.attr,
- &dev_attr_in6_min.attr,
- &dev_attr_in6_max.attr,
-
- &dev_attr_fan3_input.attr,
- &dev_attr_fan3_min.attr,
- &dev_attr_fan3_div.attr,
-
- &dev_attr_temp3_input.attr,
- &dev_attr_temp3_max.attr,
- &dev_attr_temp3_max_hyst.attr,
- &dev_attr_temp3_type.attr,
-
- &dev_attr_pwm3.attr,
-
- &dev_attr_pwm1_freq.attr,
- &dev_attr_pwm2_freq.attr,
- &dev_attr_pwm3_freq.attr,
+ VIN_UNIT_ATTRS(1),
+ VIN_UNIT_ATTRS(5),
+ VIN_UNIT_ATTRS(6),
+
+ FAN_UNIT_ATTRS(3),
+ TEMP_UNIT_ATTRS(3),
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm3_freq.dev_attr.attr,
NULL
};
data->fan_min[0] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(1));
data->fan_min[1] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(2));
data->fan_min[2] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(3));
+ w83627hf_update_fan_div(data);
/* Register common device attributes */
if ((err = sysfs_create_group(&dev->kobj, &w83627hf_group)))
/* Register chip-specific device attributes */
if (data->type == w83627hf || data->type == w83697hf)
- if ((err = device_create_file(dev, &dev_attr_in5_input))
- || (err = device_create_file(dev, &dev_attr_in5_min))
- || (err = device_create_file(dev, &dev_attr_in5_max))
- || (err = device_create_file(dev, &dev_attr_in6_input))
- || (err = device_create_file(dev, &dev_attr_in6_min))
- || (err = device_create_file(dev, &dev_attr_in6_max))
- || (err = device_create_file(dev, &dev_attr_pwm1_freq))
- || (err = device_create_file(dev, &dev_attr_pwm2_freq)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_in5_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in5_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in5_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_freq.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_freq.dev_attr)))
goto ERROR4;
if (data->type != w83697hf)
- if ((err = device_create_file(dev, &dev_attr_in1_input))
- || (err = device_create_file(dev, &dev_attr_in1_min))
- || (err = device_create_file(dev, &dev_attr_in1_max))
- || (err = device_create_file(dev, &dev_attr_fan3_input))
- || (err = device_create_file(dev, &dev_attr_fan3_min))
- || (err = device_create_file(dev, &dev_attr_fan3_div))
- || (err = device_create_file(dev, &dev_attr_temp3_input))
- || (err = device_create_file(dev, &dev_attr_temp3_max))
- || (err = device_create_file(dev, &dev_attr_temp3_max_hyst))
- || (err = device_create_file(dev, &dev_attr_temp3_type)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_in1_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_type.dev_attr)))
goto ERROR4;
if (data->type != w83697hf && data->vid != 0xff) {
if (data->type == w83627thf || data->type == w83637hf
|| data->type == w83687thf)
- if ((err = device_create_file(dev, &dev_attr_pwm3)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm3.dev_attr)))
goto ERROR4;
if (data->type == w83637hf || data->type == w83687thf)
- if ((err = device_create_file(dev, &dev_attr_pwm1_freq))
- || (err = device_create_file(dev, &dev_attr_pwm2_freq))
- || (err = device_create_file(dev, &dev_attr_pwm3_freq)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_freq.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_freq.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_freq.dev_attr)))
goto ERROR4;
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR4;
}
struct w83627hf_data *data = platform_get_drvdata(pdev);
struct resource *res;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
}
+/* Registers 0x50-0x5f are banked */
+static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg)
+{
+ if ((reg & 0x00f0) == 0x50) {
+ outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET);
+ }
+}
+
+/* Not strictly necessary, but play it safe for now */
+static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg)
+{
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
+ }
+}
+
static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
{
int res, word_sized;
&& (((reg & 0x00ff) == 0x50)
|| ((reg & 0x00ff) == 0x53)
|| ((reg & 0x00ff) == 0x55));
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- data->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(reg >> 8,
- data->addr + W83781D_DATA_REG_OFFSET);
- }
+ w83627hf_set_bank(data, reg);
outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
if (word_sized) {
(res << 8) + inb_p(data->addr +
W83781D_DATA_REG_OFFSET);
}
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- data->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
- }
+ w83627hf_reset_bank(data, reg);
mutex_unlock(&data->lock);
return res;
}
|| ((reg & 0xff00) == 0x200))
&& (((reg & 0x00ff) == 0x53)
|| ((reg & 0x00ff) == 0x55));
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- data->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(reg >> 8,
- data->addr + W83781D_DATA_REG_OFFSET);
- }
+ w83627hf_set_bank(data, reg);
outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
if (word_sized) {
outb_p(value >> 8,
}
outb_p(value & 0xff,
data->addr + W83781D_DATA_REG_OFFSET);
- if (reg & 0xff00) {
- outb_p(W83781D_REG_BANK,
- data->addr + W83781D_ADDR_REG_OFFSET);
- outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
- }
+ w83627hf_reset_bank(data, reg);
mutex_unlock(&data->lock);
return 0;
}
tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
for (i = 1; i <= 3; i++) {
if (!(tmp & BIT_SCFG1[i - 1])) {
- data->sens[i - 1] = W83781D_DEFAULT_BETA;
+ data->sens[i - 1] = 4;
} else {
if (w83627hf_read_value
(data,
| 0x01);
}
+static void w83627hf_update_fan_div(struct w83627hf_data *data)
+{
+ int reg;
+
+ reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
+ data->fan_div[0] = (reg >> 4) & 0x03;
+ data->fan_div[1] = (reg >> 6) & 0x03;
+ if (data->type != w83697hf) {
+ data->fan_div[2] = (w83627hf_read_value(data,
+ W83781D_REG_PIN) >> 6) & 0x03;
+ }
+ reg = w83627hf_read_value(data, W83781D_REG_VBAT);
+ data->fan_div[0] |= (reg >> 3) & 0x04;
+ data->fan_div[1] |= (reg >> 4) & 0x04;
+ if (data->type != w83697hf)
+ data->fan_div[2] |= (reg >> 5) & 0x04;
+}
+
static struct w83627hf_data *w83627hf_update_device(struct device *dev)
{
struct w83627hf_data *data = dev_get_drvdata(dev);
w83627hf_read_value(data,
W83781D_REG_FAN_MIN(i));
}
- for (i = 1; i <= 3; i++) {
+ for (i = 0; i <= 2; i++) {
u8 tmp = w83627hf_read_value(data,
W836X7HF_REG_PWM(data->type, i));
/* bits 0-3 are reserved in 627THF */
if (data->type == w83627thf)
tmp &= 0xf0;
- data->pwm[i - 1] = tmp;
- if(i == 2 &&
- (data->type == w83627hf || data->type == w83697hf))
+ data->pwm[i] = tmp;
+ if (i == 1 &&
+ (data->type == w83627hf || data->type == w83697hf))
break;
}
if (data->type == w83627hf) {
w83627hf_read_value(data, W83781D_REG_TEMP_HYST(3));
}
- i = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
- data->fan_div[0] = (i >> 4) & 0x03;
- data->fan_div[1] = (i >> 6) & 0x03;
- if (data->type != w83697hf) {
- data->fan_div[2] = (w83627hf_read_value(data,
- W83781D_REG_PIN) >> 6) & 0x03;
- }
- i = w83627hf_read_value(data, W83781D_REG_VBAT);
- data->fan_div[0] |= (i >> 3) & 0x04;
- data->fan_div[1] |= (i >> 4) & 0x04;
- if (data->type != w83697hf)
- data->fan_div[2] |= (i >> 5) & 0x04;
+ w83627hf_update_fan_div(data);
+
data->alarms =
w83627hf_read_value(data, W83781D_REG_ALARM1) |
(w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
the driver field to differentiate between I2C and ISA chips. */
struct w83781d_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex lock;
enum chips type;
u8 pwm2_enable; /* Boolean */
u16 sens[3]; /* 782D/783S only.
1 = pentium diode; 2 = 3904 diode;
- 3000-5000 = thermistor beta.
- Default = 3435.
- Other Betas unimplemented */
+ 4 = thermistor */
u8 vrm;
};
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = dev_get_drvdata(dev); \
int nr = attr->index; \
- s32 val; \
+ long val; \
\
val = simple_strtol(buf, NULL, 10); \
\
static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct w83781d_data *data = w83781d_update_device(dev);
+ struct w83781d_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%ld\n", (long) data->vrm);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+
+/* The W83781D has a single alarm bit for temp2 and temp3 */
+static ssize_t show_temp3_alarm(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ int bitnr = (data->type == w83781d) ? 5 : 13;
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
+static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
+
static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83781d_data *data = w83781d_update_device(dev);
static DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
show_beep_enable, store_beep_enable);
+static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ unsigned long bit;
+ u8 reg;
+
+ bit = simple_strtoul(buf, NULL, 10);
+ if (bit & ~1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ if (bit)
+ data->beep_mask |= (1 << bitnr);
+ else
+ data->beep_mask &= ~(1 << bitnr);
+
+ if (bitnr < 8) {
+ reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
+ if (bit)
+ reg |= (1 << bitnr);
+ else
+ reg &= ~(1 << bitnr);
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
+ } else if (bitnr < 16) {
+ reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
+ if (bit)
+ reg |= (1 << (bitnr - 8));
+ else
+ reg &= ~(1 << (bitnr - 8));
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
+ } else {
+ reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
+ if (bit)
+ reg |= (1 << (bitnr - 16));
+ else
+ reg &= ~(1 << (bitnr - 16));
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* The W83781D has a single beep bit for temp2 and temp3 */
+static ssize_t show_temp3_beep(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ int bitnr = (data->type == w83781d) ? 5 : 13;
+ return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
+}
+
+static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 0);
+static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 1);
+static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 2);
+static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 3);
+static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 8);
+static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 9);
+static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 10);
+static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 16);
+static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 17);
+static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 6);
+static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 7);
+static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 11);
+static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 4);
+static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
+ show_beep, store_beep, 5);
+static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
+ show_temp3_beep, store_beep, 13);
+
static ssize_t
show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
{
tmp & ~BIT_SCFG2[nr]);
data->sens[nr] = val;
break;
- case W83781D_DEFAULT_BETA: /* thermistor */
+ case W83781D_DEFAULT_BETA:
+ dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
+ "instead\n", W83781D_DEFAULT_BETA);
+ /* fall through */
+ case 4: /* thermistor */
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
w83781d_write_value(data, W83781D_REG_SCFG1,
tmp & ~BIT_SCFG1[nr]);
data->sens[nr] = val;
break;
default:
- dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n",
- (long) val, W83781D_DEFAULT_BETA);
+ dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
+ (long) val);
break;
}
#define IN_UNIT_ATTRS(X) \
&sensor_dev_attr_in##X##_input.dev_attr.attr, \
&sensor_dev_attr_in##X##_min.dev_attr.attr, \
- &sensor_dev_attr_in##X##_max.dev_attr.attr
+ &sensor_dev_attr_in##X##_max.dev_attr.attr, \
+ &sensor_dev_attr_in##X##_alarm.dev_attr.attr, \
+ &sensor_dev_attr_in##X##_beep.dev_attr.attr
#define FAN_UNIT_ATTRS(X) \
&sensor_dev_attr_fan##X##_input.dev_attr.attr, \
&sensor_dev_attr_fan##X##_min.dev_attr.attr, \
- &sensor_dev_attr_fan##X##_div.dev_attr.attr
+ &sensor_dev_attr_fan##X##_div.dev_attr.attr, \
+ &sensor_dev_attr_fan##X##_alarm.dev_attr.attr, \
+ &sensor_dev_attr_fan##X##_beep.dev_attr.attr
#define TEMP_UNIT_ATTRS(X) \
&sensor_dev_attr_temp##X##_input.dev_attr.attr, \
&sensor_dev_attr_temp##X##_max.dev_attr.attr, \
- &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr
+ &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr, \
+ &sensor_dev_attr_temp##X##_alarm.dev_attr.attr, \
+ &sensor_dev_attr_temp##X##_beep.dev_attr.attr
static struct attribute* w83781d_attributes[] = {
IN_UNIT_ATTRS(0),
|| (err = device_create_file(dev,
&sensor_dev_attr_in1_min.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_in1_max.dev_attr)))
+ &sensor_dev_attr_in1_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_beep.dev_attr)))
return err;
}
if (kind != as99127f && kind != w83781d && kind != w83783s) {
&sensor_dev_attr_in7_min.dev_attr))
|| (err = device_create_file(dev,
&sensor_dev_attr_in7_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in7_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in7_beep.dev_attr))
|| (err = device_create_file(dev,
&sensor_dev_attr_in8_input.dev_attr))
|| (err = device_create_file(dev,
&sensor_dev_attr_in8_min.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_in8_max.dev_attr)))
+ &sensor_dev_attr_in8_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in8_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in8_beep.dev_attr)))
return err;
}
if (kind != w83783s) {
|| (err = device_create_file(dev,
&sensor_dev_attr_temp3_max.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_temp3_max_hyst.dev_attr)))
+ &sensor_dev_attr_temp3_max_hyst.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_beep.dev_attr)))
return err;
+
+ if (kind != w83781d)
+ err = sysfs_chmod_file(&dev->kobj,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ S_IRUGO | S_IWUSR);
+ if (err)
+ return err;
}
if (kind != w83781d && kind != as99127f) {
if (err)
goto ERROR4;
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR4;
}
/* main client */
if (data) {
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &w83781d_group);
sysfs_remove_group(&client->dev.kobj, &w83781d_group_opt);
}
if (err)
goto exit_remove_files;
- data->class_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
{
struct w83781d_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
device_remove_file(&pdev->dev, &dev_attr_name);
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
for (i = 1; i <= 3; i++) {
if (!(tmp & BIT_SCFG1[i - 1])) {
- data->sens[i - 1] = W83781D_DEFAULT_BETA;
+ data->sens[i - 1] = 4;
} else {
if (w83781d_read_value
(data,
w83791d.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
- Copyright (C) 2006 Charles Spirakis <bezaur@gmail.com>
+ Copyright (C) 2006-2007 Charles Spirakis <bezaur@gmail.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
struct w83791d_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9),
};
+
+static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr =
+ to_sensor_dev_attr(attr);
+ struct w83791d_data *data = w83791d_update_device(dev);
+ int bitnr = sensor_attr->index;
+
+ return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1);
+}
+
+static ssize_t store_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr =
+ to_sensor_dev_attr(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83791d_data *data = i2c_get_clientdata(client);
+ int bitnr = sensor_attr->index;
+ int bytenr = bitnr / 8;
+ long val = simple_strtol(buf, NULL, 10) ? 1 : 0;
+
+ mutex_lock(&data->update_lock);
+
+ data->beep_mask &= ~(0xff << (bytenr * 8));
+ data->beep_mask |= w83791d_read(client, W83791D_REG_BEEP_CTRL[bytenr])
+ << (bytenr * 8);
+
+ data->beep_mask &= ~(1 << bitnr);
+ data->beep_mask |= val << bitnr;
+
+ w83791d_write(client, W83791D_REG_BEEP_CTRL[bytenr],
+ (data->beep_mask >> (bytenr * 8)) & 0xff);
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr =
+ to_sensor_dev_attr(attr);
+ struct w83791d_data *data = w83791d_update_device(dev);
+ int bitnr = sensor_attr->index;
+
+ return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
+}
+
+/* Note: The bitmask for the beep enable/disable is different than
+ the bitmask for the alarm. */
+static struct sensor_device_attribute sda_in_beep[] = {
+ SENSOR_ATTR(in0_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 0),
+ SENSOR_ATTR(in1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 13),
+ SENSOR_ATTR(in2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 2),
+ SENSOR_ATTR(in3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 3),
+ SENSOR_ATTR(in4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 8),
+ SENSOR_ATTR(in5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 9),
+ SENSOR_ATTR(in6_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 10),
+ SENSOR_ATTR(in7_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 16),
+ SENSOR_ATTR(in8_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 17),
+ SENSOR_ATTR(in9_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 14),
+};
+
+static struct sensor_device_attribute sda_in_alarm[] = {
+ SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0),
+ SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1),
+ SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2),
+ SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3),
+ SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8),
+ SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9),
+ SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10),
+ SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19),
+ SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20),
+ SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 14),
+};
+
#define show_fan_reg(reg) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
char *buf) \
show_fan_div, store_fan_div, 4),
};
+static struct sensor_device_attribute sda_fan_beep[] = {
+ SENSOR_ATTR(fan1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 6),
+ SENSOR_ATTR(fan2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 7),
+ SENSOR_ATTR(fan3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 11),
+ SENSOR_ATTR(fan4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 21),
+ SENSOR_ATTR(fan5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 22),
+};
+
+static struct sensor_device_attribute sda_fan_alarm[] = {
+ SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6),
+ SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7),
+ SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11),
+ SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21),
+ SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22),
+};
+
/* read/write the temperature1, includes measured value and limits */
static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr,
char *buf)
show_temp23, store_temp23, 1, 2),
};
+/* Note: The bitmask for the beep enable/disable is different than
+ the bitmask for the alarm. */
+static struct sensor_device_attribute sda_temp_beep[] = {
+ SENSOR_ATTR(temp1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 4),
+ SENSOR_ATTR(temp2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 5),
+ SENSOR_ATTR(temp3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 1),
+};
+
+static struct sensor_device_attribute sda_temp_alarm[] = {
+ SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4),
+ SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5),
+ SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13),
+};
/* get reatime status of all sensors items: voltage, temp, fan */
static ssize_t show_alarms_reg(struct device *dev,
static ssize_t show_vrm_reg(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct w83791d_data *data = w83791d_update_device(dev);
+ struct w83791d_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", data->vrm);
}
#define IN_UNIT_ATTRS(X) \
&sda_in_input[X].dev_attr.attr, \
&sda_in_min[X].dev_attr.attr, \
- &sda_in_max[X].dev_attr.attr
+ &sda_in_max[X].dev_attr.attr, \
+ &sda_in_beep[X].dev_attr.attr, \
+ &sda_in_alarm[X].dev_attr.attr
#define FAN_UNIT_ATTRS(X) \
&sda_fan_input[X].dev_attr.attr, \
&sda_fan_min[X].dev_attr.attr, \
- &sda_fan_div[X].dev_attr.attr
+ &sda_fan_div[X].dev_attr.attr, \
+ &sda_fan_beep[X].dev_attr.attr, \
+ &sda_fan_alarm[X].dev_attr.attr
#define TEMP_UNIT_ATTRS(X) \
&sda_temp_input[X].dev_attr.attr, \
&sda_temp_max[X].dev_attr.attr, \
- &sda_temp_max_hyst[X].dev_attr.attr
+ &sda_temp_max_hyst[X].dev_attr.attr, \
+ &sda_temp_beep[X].dev_attr.attr, \
+ &sda_temp_alarm[X].dev_attr.attr
static struct attribute *w83791d_attributes[] = {
IN_UNIT_ATTRS(0),
goto error3;
/* Everything is ready, now register the working device */
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto error4;
}
/* main client */
if (data) {
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &w83791d_group);
}
struct w83792d_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
enum chips type;
struct mutex update_lock;
return sprintf(buf, "%d\n", data->alarms);
}
+static ssize_t show_alarm(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct w83792d_data *data = w83792d_update_device(dev);
+ return sprintf(buf, "%d\n", (data->alarms >> nr) & 1);
+}
+
static ssize_t
show_pwm(struct device *dev, struct device_attribute *attr,
char *buf)
static SENSOR_DEVICE_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR,
show_temp23, store_temp23, 1, 4);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19);
+static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
show_chassis_clear, store_chassis_clear);
static SENSOR_DEVICE_ATTR(fan7_div, S_IWUSR | S_IRUGO,
show_fan_div, store_fan_div, 7);
-static struct attribute *w83792d_attributes_fan[4][4] = {
+static struct attribute *w83792d_attributes_fan[4][5] = {
{
&sensor_dev_attr_fan4_input.dev_attr.attr,
&sensor_dev_attr_fan4_min.dev_attr.attr,
&sensor_dev_attr_fan4_div.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan5_input.dev_attr.attr,
&sensor_dev_attr_fan5_min.dev_attr.attr,
&sensor_dev_attr_fan5_div.dev_attr.attr,
+ &sensor_dev_attr_fan5_alarm.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan6_input.dev_attr.attr,
&sensor_dev_attr_fan6_min.dev_attr.attr,
&sensor_dev_attr_fan6_div.dev_attr.attr,
+ &sensor_dev_attr_fan6_alarm.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan7_input.dev_attr.attr,
&sensor_dev_attr_fan7_min.dev_attr.attr,
&sensor_dev_attr_fan7_div.dev_attr.attr,
+ &sensor_dev_attr_fan7_alarm.dev_attr.attr,
NULL
}
};
&sensor_dev_attr_in8_input.dev_attr.attr,
&sensor_dev_attr_in8_max.dev_attr.attr,
&sensor_dev_attr_in8_min.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
+ &sensor_dev_attr_in8_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
&sensor_dev_attr_fan3_input.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_div.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
NULL
};
&w83792d_group_fan[3])))
goto exit_remove_files;
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
/* main client */
if (data) {
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &w83792d_group);
for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
sysfs_remove_group(&client->dev.kobj,
struct w83793_data {
struct i2c_client client;
struct i2c_client *lm75[2];
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
/* main client */
if (data) {
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
device_remove_file(dev,
}
}
- data->class_dev = hwmon_device_register(dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
struct w83l785ts_data {
struct i2c_client client;
- struct class_device *class_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
goto exit_remove;
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
struct w83l785ts_data *data = i2c_get_clientdata(client);
int err;
- hwmon_device_unregister(data->class_dev);
+ hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&client->dev,
&sensor_dev_attr_temp1_input.dev_attr);
device_remove_file(&client->dev,
#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
struct attribute_group *attr_group;
- struct class_device *hwmon;
+ struct device *hwmon;
#endif
u16 model;
static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
{
- struct class_device *hwmon;
+ struct device *hwmon;
int err;
/* hwmon sensors need a reference voltage */
****************************************************************************/
static struct platform_device *tpacpi_pdev;
-static struct class_device *tpacpi_hwmon;
+static struct device *tpacpi_hwmon;
static struct input_dev *tpacpi_inputdev;
/* Device model */
static struct platform_device *tpacpi_pdev;
-static struct class_device *tpacpi_hwmon;
+static struct device *tpacpi_hwmon;
static struct platform_driver tpacpi_pdriver;
static struct input_dev *tpacpi_inputdev;
static int tpacpi_create_driver_attributes(struct device_driver *drv);
#include <linux/device.h>
-struct class_device *hwmon_device_register(struct device *dev);
+struct device *hwmon_device_register(struct device *dev);
-void hwmon_device_unregister(struct class_device *cdev);
+void hwmon_device_unregister(struct device *dev);
/* Scale user input to sensible values */
static inline int SENSORS_LIMIT(long value, long low, long high)
projects / linux-2.6-omap-h63xx.git / commitdiff