[PATCH] H3 alsa support

Here is a small patch that adds alsa support on H3. I have tested it by
playing a few raw, wav files.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 81e103dfb27114211657a4c9cea03754e35eda82..2f8dde0da7b612b7c17e2b64f85a3558c9844540 100644 (file)
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -44,6 +44,8 @@
 #include <asm/arch/keypad.h>
 #include <asm/arch/dma.h>
 #include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
 
 extern int omap_gpio_init(void);
 
@@ -363,6 +365,41 @@ static struct platform_device h3_lcd_device = {
        .id             = -1,
 };
 
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+       .spcr1 = RINTM(3) | RRST,
+       .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
+       .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+       .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
+       .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+       .srgr1 = FWID(15),
+       .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
+
+       .pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
+       //.pcr0 = CLKXP | CLKRP,        /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+       .name                   = "H3 TSC2101",
+       .mcbsp_regs_alsa        = &mcbsp_regs,
+       .codec_configure_dev    = NULL, // tsc2101_configure,
+       .codec_set_samplerate   = NULL, // tsc2101_set_samplerate,
+       .codec_clock_setup      = NULL, // tsc2101_clock_setup,
+       .codec_clock_on         = NULL, // tsc2101_clock_on,
+       .codec_clock_off        = NULL, // tsc2101_clock_off,
+       .get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+};
+
+static struct platform_device h3_mcbsp1_device = {
+       .name   = "omap_alsa_mcbsp",
+       .id     = 1,
+       .dev = {
+               .platform_data  = &alsa_config,
+       },
+};
+
 static struct platform_device *devices[] __initdata = {
        &nor_device,
        &nand_device,
@@ -371,6 +408,7 @@ static struct platform_device *devices[] __initdata = {
        &h3_irda_device,
        &h3_kp_device,
        &h3_lcd_device,
+       &h3_mcbsp1_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {