Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
+config MACH_E350
+ bool "Toshiba e350"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e350 family PDA.
+
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
-obj-$(CONFIG_MACH_PALMTX)+= palmtx.o
+obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740) += e740_lcd.o
+obj-$(CONFIG_MACH_E750) += e750_lcd.o
+obj-$(CONFIG_MACH_E400) += e400_lcd.o
+obj-$(CONFIG_MACH_E800) += e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX) += palmtx.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
--- /dev/null
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+ .pixclock = 140703,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 28,
+ .right_margin = 8,
+ .vsync_len = 3,
+ .upper_margin = 5,
+ .lower_margin = 6,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+ .modes = &e400_pxafb_mode_info,
+ .num_modes = 1,
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = 0,
+ .pxafb_backlight_power = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+ if (!machine_is_e400())
+ return -ENODEV;
+
+ set_pxa_fb_info(&e400_pxafb_mach_info);
+ return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
--- /dev/null
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+ .lcd_format = 0x00008023,
+ .lcdd_cntl1 = 0x0f000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00ffff03,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 20,
+ .right_margin = 28,
+ .upper_margin = 9,
+ .lower_margin = 8,
+ .crtc_ss = 0x80140013,
+ .crtc_ls = 0x81150110,
+ .crtc_gs = 0x80050005,
+ .crtc_vpos_gs = 0x000a0009,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa906000a,
+ .crtc_gclk = 0x80050108,
+ .crtc_goe = 0x80050108,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+ .crtc_ps1_active = 0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+ .init_data1 = 0x21002103,
+ .gpio_dir1 = 0xffffdeff,
+ .gpio_oe1 = 0x03c00643,
+ .init_data2 = 0x003f003f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+ .modelist = &e740_lcd_mode,
+ .num_modes = 1,
+ .regs = &e740_lcd_regs,
+ .gpio = &e740_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e740_fb_resources),
+ .resource = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+ int ret;
+
+ if (!machine_is_e740())
+ return -ENODEV;
+
+ return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
--- /dev/null
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 21,
+ .right_margin = 22,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0x8014000d,
+ .crtc_gs = 0xc1000005,
+ .crtc_vpos_gs = 0x00020147,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x80cc0015,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x61060017,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+ .init_data1 = 0x01192f1b,
+ .gpio_dir1 = 0xd5ffdeff,
+ .gpio_oe1 = 0x000020bf,
+ .init_data2 = 0x010f010f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+ .modelist = &e750_lcd_mode,
+ .num_modes = 1,
+ .regs = &e750_lcd_regs,
+ .gpio = &e750_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e750_fb_resources),
+ .resource = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+ if (!machine_is_e750())
+ return -ENODEV;
+
+ return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
--- /dev/null
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x02a00000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x000ff2a3,
+ .genlcd_cntl2 = 0x000002a3,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+ [0] = {
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 52,
+ .right_margin = 148,
+ .upper_margin = 2,
+ .lower_margin = 6,
+ .crtc_ss = 0x80350034,
+ .crtc_ls = 0x802b0026,
+ .crtc_gs = 0x80160016,
+ .crtc_vpos_gs = 0x00020003,
+ .crtc_rev = 0x0040001d,
+ .crtc_dclk = 0xe0000000,
+ .crtc_gclk = 0x82a50049,
+ .crtc_goe = 0x80ee001c,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 128,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 6,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ },
+ [1] = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 15,
+ .right_margin = 88,
+ .upper_margin = 0,
+ .lower_margin = 7,
+ .crtc_ss = 0xd010000f,
+ .crtc_ls = 0x80070003,
+ .crtc_gs = 0x80000000,
+ .crtc_vpos_gs = 0x01460147,
+ .crtc_rev = 0x00400003,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x814b0008,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 100,
+ .pixclk_divider = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+ .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+ .init_data1 = 0xc13fc019,
+ .gpio_dir1 = 0x3e40df7f,
+ .gpio_oe1 = 0x003c3000,
+ .init_data2 = 0x00000000,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x10001545,
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+ unsigned long tmp;
+
+ tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+ if (par->mode->xres == 480)
+ tmp |= 0x100;
+ else
+ tmp &= ~0x100;
+ w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+ .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+ .modelist = e800_lcd_mode,
+ .num_modes = 2,
+ .regs = &e800_lcd_regs,
+ .gpio = &e800_w100_gpio_info,
+ .mem = &e800_w100_mem_info,
+ .tg = &e800_tg_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e800_fb_resources),
+ .resource = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+ if (!machine_is_e800())
+ return -ENODEV;
+
+ return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
#include <asm/arch/hardware.h>
#include <asm/mach-types.h>
-#include <generic.h>
+#include "generic.h"
/* Only e800 has 128MB RAM */
static void __init eseries_fixup(struct machine_desc *desc,
MACHINE_END
#endif
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
#ifdef CONFIG_MACH_E740
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
--- /dev/null
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/arch/udc.h>
+#include <asm/arch/eseries-gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+ .gpio_vbus = GPIO_E7XX_USB_DISC,
+ .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+ .gpio_vbus = GPIO_E800_USB_DISC,
+ .gpio_pullup = GPIO_E800_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+ if (machine_is_e330() || machine_is_e350() ||
+ machine_is_e740() || machine_is_e750() ||
+ machine_is_e400())
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+ else if (machine_is_e800())
+ pxa_set_udc_info(&e800_udc_mach_info);
+
+ return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
static void pullup_off(void)
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
+ int off_level = mach->gpio_pullup_inverted;
if (mach->gpio_pullup)
- gpio_set_value(mach->gpio_pullup, 0);
+ gpio_set_value(mach->gpio_pullup, off_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
static void pullup_on(void)
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
+ int on_level = !mach->gpio_pullup_inverted;
if (mach->gpio_pullup)
- gpio_set_value(mach->gpio_pullup, 1);
+ gpio_set_value(mach->gpio_pullup, on_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
}
--- /dev/null
+/*
+ * eseries-gpio.h
+ *
+ * Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* e-series power button */
+#define GPIO_ESERIES_POWERBTN 0
+
+/* UDC GPIO definitions */
+#define GPIO_E7XX_USB_DISC 13
+#define GPIO_E7XX_USB_PULLUP 3
+
+#define GPIO_E800_USB_DISC 4
+#define GPIO_E800_USB_PULLUP 84
+
+/* e740 PCMCIA GPIO definitions */
+/* Note: PWR1 seems to be inverted */
+#define GPIO_E740_PCMCIA_CD0 8
+#define GPIO_E740_PCMCIA_CD1 44
+#define GPIO_E740_PCMCIA_RDY0 11
+#define GPIO_E740_PCMCIA_RDY1 6
+#define GPIO_E740_PCMCIA_RST0 27
+#define GPIO_E740_PCMCIA_RST1 24
+#define GPIO_E740_PCMCIA_PWR0 20
+#define GPIO_E740_PCMCIA_PWR1 23
+
+/* e750 PCMCIA GPIO definitions */
+#define GPIO_E750_PCMCIA_CD0 8
+#define GPIO_E750_PCMCIA_RDY0 12
+#define GPIO_E750_PCMCIA_RST0 27
+#define GPIO_E750_PCMCIA_PWR0 20
+
+/* e800 PCMCIA GPIO definitions */
+#define GPIO_E800_PCMCIA_RST0 69
+#define GPIO_E800_PCMCIA_RST1 72
+#define GPIO_E800_PCMCIA_PWR0 20
+#define GPIO_E800_PCMCIA_PWR1 73
+
+/* e7xx IrDA power control */
+#define GPIO_E7XX_IR_ON 38
+
+/* ASIC related GPIOs */
+#define GPIO_ESERIES_TMIO_IRQ 5
+#define GPIO_E800_ANGELX_IRQ 8
--- /dev/null
+/*
+ * eseries-irq.h
+ *
+ * Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ IRQ_TMIO(1)
+#define TMIO_USB_IRQ IRQ_TMIO(2)
+
*/
bool gpio_vbus_inverted;
u16 gpio_vbus; /* high == vbus present */
+ bool gpio_pullup_inverted;
u16 gpio_pullup; /* high == pullup activated */
};
projects / linux-2.6-omap-h63xx.git / commitdiff