#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.11.2"
+#define DRV_VERSION "2.0.14.2"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
}
}
- /* Enable Tx FIFO partition 0. */
- val64 = readq(&bar0->tx_fifo_partition_0);
- val64 |= BIT(0); /* To enable the FIFO partition. */
- writeq(val64, &bar0->tx_fifo_partition_0);
-
/*
* Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
break;
}
+ /* Enable Tx FIFO partition 0. */
+ val64 = readq(&bar0->tx_fifo_partition_0);
+ val64 |= (TX_FIFO_PARTITION_EN);
+ writeq(val64, &bar0->tx_fifo_partition_0);
+
/* Filling the Rx round robin registers as per the
* number of Rings and steering based on QoS.
*/
{
XENA_dev_config_t __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
- u16 interruptible, i;
+ u16 interruptible;
mac_info_t *mac_control;
struct config_param *config;
interruptible |= TX_MAC_INTR | RX_MAC_INTR;
en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
- /* Disable PRCs */
- for (i = 0; i < config->rx_ring_num; i++) {
- val64 = readq(&bar0->prc_ctrl_n[i]);
- val64 &= ~((u64) PRC_CTRL_RC_ENABLED);
- writeq(val64, &bar0->prc_ctrl_n[i]);
- }
+ /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
+ val64 = readq(&bar0->adapter_control);
+ val64 &= ~(ADAPTER_CNTL_EN);
+ writeq(val64, &bar0->adapter_control);
}
static int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb)
alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
atomic_read(&nic->rx_bufs_left[ring_no]);
- block_no1 = mac_control->rings[ring_no].rx_curr_get_info.block_index;
+ block_no1 = mac_control->rings[ring_no].rx_curr_get_info.block_index;
off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
while (alloc_tab < alloc_cnt) {
block_no = mac_control->rings[ring_no].rx_curr_put_info.
nic_t *sp = dev->priv;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
int i;
- u64 reason = 0, val64;
+ u64 reason = 0, val64, org_mask;
mac_info_t *mac_control;
struct config_param *config;
}
val64 = 0xFFFFFFFFFFFFFFFFULL;
+ /* Store current mask before masking all interrupts */
+ org_mask = readq(&bar0->general_int_mask);
+ writeq(val64, &bar0->general_int_mask);
+
#ifdef CONFIG_S2IO_NAPI
if (reason & GEN_INTR_RXTRAFFIC) {
if (netif_rx_schedule_prep(dev)) {
DBG_PRINT(ERR_DBG, " in ISR!!\n");
clear_bit(0, (&sp->tasklet_status));
atomic_dec(&sp->isr_cnt);
+ writeq(org_mask, &bar0->general_int_mask);
return IRQ_HANDLED;
}
clear_bit(0, (&sp->tasklet_status));
}
}
#endif
-
+ writeq(org_mask, &bar0->general_int_mask);
atomic_dec(&sp->isr_cnt);
return IRQ_HANDLED;
}
clear_bit(0, &(nic->link_state));
}
+static int set_rxd_buffer_pointer(nic_t *sp, RxD_t *rxdp, buffAdd_t *ba,
+ struct sk_buff **skb, u64 *temp0, u64 *temp1,
+ u64 *temp2, int size)
+{
+ struct net_device *dev = sp->dev;
+ struct sk_buff *frag_list;
+
+ if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
+ /* allocate skb */
+ if (*skb) {
+ DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
+ /*
+ * As Rx frame are not going to be processed,
+ * using same mapped address for the Rxd
+ * buffer pointer
+ */
+ ((RxD1_t*)rxdp)->Buffer0_ptr = *temp0;
+ } else {
+ *skb = dev_alloc_skb(size);
+ if (!(*skb)) {
+ DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
+ DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
+ return -ENOMEM ;
+ }
+ /* storing the mapped addr in a temp variable
+ * such it will be used for next rxd whose
+ * Host Control is NULL
+ */
+ ((RxD1_t*)rxdp)->Buffer0_ptr = *temp0 =
+ pci_map_single( sp->pdev, (*skb)->data,
+ size - NET_IP_ALIGN,
+ PCI_DMA_FROMDEVICE);
+ rxdp->Host_Control = (unsigned long) (*skb);
+ }
+ } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
+ /* Two buffer Mode */
+ if (*skb) {
+ ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2;
+ ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0;
+ ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1;
+ } else {
+ *skb = dev_alloc_skb(size);
+ ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 =
+ pci_map_single(sp->pdev, (*skb)->data,
+ dev->mtu + 4,
+ PCI_DMA_FROMDEVICE);
+ ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 =
+ pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ rxdp->Host_Control = (unsigned long) (*skb);
+
+ /* Buffer-1 will be dummy buffer not used */
+ ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1 =
+ pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
+ PCI_DMA_FROMDEVICE);
+ }
+ } else if ((rxdp->Host_Control == 0)) {
+ /* Three buffer mode */
+ if (*skb) {
+ ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0;
+ ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1;
+ ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2;
+ } else {
+ *skb = dev_alloc_skb(size);
+
+ ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 =
+ pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ /* Buffer-1 receives L3/L4 headers */
+ ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1 =
+ pci_map_single( sp->pdev, (*skb)->data,
+ l3l4hdr_size + 4,
+ PCI_DMA_FROMDEVICE);
+ /*
+ * skb_shinfo(skb)->frag_list will have L4
+ * data payload
+ */
+ skb_shinfo(*skb)->frag_list = dev_alloc_skb(dev->mtu +
+ ALIGN_SIZE);
+ if (skb_shinfo(*skb)->frag_list == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb \
+ failed\n ", dev->name);
+ return -ENOMEM ;
+ }
+ frag_list = skb_shinfo(*skb)->frag_list;
+ frag_list->next = NULL;
+ /*
+ * Buffer-2 receives L4 data payload
+ */
+ ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 =
+ pci_map_single( sp->pdev, frag_list->data,
+ dev->mtu, PCI_DMA_FROMDEVICE);
+ }
+ }
+ return 0;
+}
+static void set_rxd_buffer_size(nic_t *sp, RxD_t *rxdp, int size)
+{
+ struct net_device *dev = sp->dev;
+ if (sp->rxd_mode == RXD_MODE_1) {
+ rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN);
+ } else if (sp->rxd_mode == RXD_MODE_3B) {
+ rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
+ rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
+ rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4);
+ } else {
+ rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
+ rxdp->Control_2 |= SET_BUFFER1_SIZE_3(l3l4hdr_size + 4);
+ rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu);
+ }
+}
+
+static int rxd_owner_bit_reset(nic_t *sp)
+{
+ int i, j, k, blk_cnt = 0, size;
+ mac_info_t * mac_control = &sp->mac_control;
+ struct config_param *config = &sp->config;
+ struct net_device *dev = sp->dev;
+ RxD_t *rxdp = NULL;
+ struct sk_buff *skb = NULL;
+ buffAdd_t *ba = NULL;
+ u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
+
+ /* Calculate the size based on ring mode */
+ size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
+ HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
+ if (sp->rxd_mode == RXD_MODE_1)
+ size += NET_IP_ALIGN;
+ else if (sp->rxd_mode == RXD_MODE_3B)
+ size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
+ else
+ size = l3l4hdr_size + ALIGN_SIZE + BUF0_LEN + 4;
+
+ for (i = 0; i < config->rx_ring_num; i++) {
+ blk_cnt = config->rx_cfg[i].num_rxd /
+ (rxd_count[sp->rxd_mode] +1);
+
+ for (j = 0; j < blk_cnt; j++) {
+ for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
+ rxdp = mac_control->rings[i].
+ rx_blocks[j].rxds[k].virt_addr;
+ if(sp->rxd_mode >= RXD_MODE_3A)
+ ba = &mac_control->rings[i].ba[j][k];
+ set_rxd_buffer_pointer(sp, rxdp, ba,
+ &skb,(u64 *)&temp0_64,
+ (u64 *)&temp1_64,
+ (u64 *)&temp2_64, size);
+
+ set_rxd_buffer_size(sp, rxdp, size);
+ wmb();
+ /* flip the Ownership bit to Hardware */
+ rxdp->Control_1 |= RXD_OWN_XENA;
+ }
+ }
+ }
+ return 0;
+
+}
+
static void s2io_card_down(nic_t * sp, int flag)
{
int cnt = 0;
/* Check if the device is Quiescent and then Reset the NIC */
do {
+ /* As per the HW requirement we need to replenish the
+ * receive buffer to avoid the ring bump. Since there is
+ * no intention of processing the Rx frame at this pointwe are
+ * just settting the ownership bit of rxd in Each Rx
+ * ring to HW and set the appropriate buffer size
+ * based on the ring mode
+ */
+ rxd_owner_bit_reset(sp);
+
val64 = readq(&bar0->adapter_status);
if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
break;
projects / linux-2.6-omap-h63xx.git / commitdiff