[PATCH] at91_serial -> atmel_serial: Public definitions

Rename the following public definitions:
  * AT91_NR_UART -> ATMEL_MAX_UART
  * struct at91_uart_data -> struct atmel_uart_data
  * at91_default_console_device -> atmel_default_console_device

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 28fd4b8f4742e614faaaf31c31eec11f42ba5ed6..5a3919f09d4d784e6166136da9cffa3b8e92b113 100644 (file)
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -558,7 +558,7 @@ static struct resource dbgu_resources[] = {
        },
 };
 
-static struct at91_uart_data dbgu_data = {
+static struct atmel_uart_data dbgu_data = {
        .use_dma_tx     = 0,
        .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
 };
@@ -593,7 +593,7 @@ static struct resource uart0_resources[] = {
        },
 };
 
-static struct at91_uart_data uart0_data = {
+static struct atmel_uart_data uart0_data = {
        .use_dma_tx     = 1,
        .use_dma_rx     = 1,
 };
@@ -635,7 +635,7 @@ static struct resource uart1_resources[] = {
        },
 };
 
-static struct at91_uart_data uart1_data = {
+static struct atmel_uart_data uart1_data = {
        .use_dma_tx     = 1,
        .use_dma_rx     = 1,
 };
@@ -676,7 +676,7 @@ static struct resource uart2_resources[] = {
        },
 };
 
-static struct at91_uart_data uart2_data = {
+static struct atmel_uart_data uart2_data = {
        .use_dma_tx     = 1,
        .use_dma_rx     = 1,
 };
@@ -711,7 +711,7 @@ static struct resource uart3_resources[] = {
        },
 };
 
-static struct at91_uart_data uart3_data = {
+static struct atmel_uart_data uart3_data = {
        .use_dma_tx     = 1,
        .use_dma_rx     = 1,
 };
@@ -733,8 +733,8 @@ static inline void configure_usart3_pins(void)
        at91_set_B_periph(AT91_PIN_PA6, 0);             /* RXD3 */
 }
 
-struct platform_device *at91_uarts[AT91_NR_UART];      /* the UARTs to use */
-struct platform_device *at91_default_console_device;   /* the serial console device */
+struct platform_device *at91_uarts[ATMEL_MAX_UART];    /* the UARTs to use */
+struct platform_device *atmel_default_console_device;  /* the serial console device */
 
 void __init at91_init_serial(struct at91_uart_config *config)
 {
@@ -775,9 +775,9 @@ void __init at91_init_serial(struct at91_uart_config *config)
        }
 
        /* Set serial console device */
-       if (config->console_tty < AT91_NR_UART)
-               at91_default_console_device = at91_uarts[config->console_tty];
-       if (!at91_default_console_device)
+       if (config->console_tty < ATMEL_MAX_UART)
+               atmel_default_console_device = at91_uarts[config->console_tty];
+       if (!atmel_default_console_device)
                printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
@@ -785,7 +785,7 @@ void __init at91_add_device_serial(void)
 {
        int i;
 
-       for (i = 0; i < AT91_NR_UART; i++) {
+       for (i = 0; i < ATMEL_MAX_UART; i++) {
                if (at91_uarts[i])
                        platform_device_register(at91_uarts[i]);
        }

diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index 842e7be7fb5e7a2584abac46d3e478769e1fed7b..05d1296bd7b23383a877e33cdc7a0ff87b0ee98c 100644 (file)
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -615,11 +615,11 @@ struct platform_device *__init at32_add_device_usart(unsigned int id)
        return pdev;
 }
 
-struct platform_device *at91_default_console_device;
+struct platform_device *atmel_default_console_device;
 
 void __init at32_setup_serial_console(unsigned int usart_id)
 {
-       at91_default_console_device = setup_usart(usart_id);
+       atmel_default_console_device = setup_usart(usart_id);
 }
 
 /* --------------------------------------------------------------------

diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index f14a07ed60b814035ee84c265a1c6305c7dd19d3..65972ce63c7dce58c2c34fe8f7d1bd73bd53e6f2 100644 (file)
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -113,7 +113,7 @@ struct at91_uart_port {
        unsigned short          suspended;      /* is port suspended? */
 };
 
-static struct at91_uart_port at91_ports[AT91_NR_UART];
+static struct at91_uart_port at91_ports[ATMEL_MAX_UART];
 
 #ifdef SUPPORT_SYSRQ
 static struct console at91_console;
@@ -682,7 +682,7 @@ static struct uart_ops at91_pops = {
 static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev)
 {
        struct uart_port *port = &at91_port->uart;
-       struct at91_uart_data *data = pdev->dev.platform_data;
+       struct atmel_uart_data *data = pdev->dev.platform_data;
 
        port->iotype    = UPIO_MEM;
        port->flags     = UPF_BOOT_AUTOCONF;
@@ -834,9 +834,9 @@ static struct console at91_console = {
  */
 static int __init at91_console_init(void)
 {
-       if (at91_default_console_device) {
-               add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL);
-               at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device);
+       if (atmel_default_console_device) {
+               add_preferred_console(AT91_DEVICENAME, atmel_default_console_device->id, NULL);
+               at91_init_port(&(at91_ports[atmel_default_console_device->id]), atmel_default_console_device);
                register_console(&at91_console);
        }
 
@@ -849,7 +849,7 @@ console_initcall(at91_console_init);
  */
 static int __init at91_late_console_init(void)
 {
-       if (at91_default_console_device && !(at91_console.flags & CON_ENABLED))
+       if (atmel_default_console_device && !(at91_console.flags & CON_ENABLED))
                register_console(&at91_console);
 
        return 0;
@@ -866,7 +866,7 @@ static struct uart_driver at91_uart = {
        .dev_name               = AT91_DEVICENAME,
        .major                  = SERIAL_AT91_MAJOR,
        .minor                  = MINOR_START,
-       .nr                     = AT91_NR_UART,
+       .nr                     = ATMEL_MAX_UART,
        .cons                   = AT91_CONSOLE_DEVICE,
 };
 

diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h
index c1ca9a4658ec9e801aa49bc2d7ba746420615c34..d56527055c9d6dcb9377b037466db19a97855c54 100644 (file)
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ b/include/asm-arm/arch-at91rm9200/board.h
@@ -97,10 +97,10 @@ struct at91_uart_config {
        unsigned short  nr_tty;         /* number of serial tty's */
        short           tty_map[];      /* map UART to tty number */
 };
-extern struct platform_device *at91_default_console_device;
+extern struct platform_device *atmel_default_console_device;
 extern void __init at91_init_serial(struct at91_uart_config *config);
 
-struct at91_uart_data {
+struct atmel_uart_data {
        short           use_dma_tx;     /* use transmit DMA? */
        short           use_dma_rx;     /* use receive DMA? */
 };

diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index 6551b4d1ff7b21ca6e78e9c53a563fc3e50e114a..9ca4cc9c0b2e707b4f155c9053bde7571ac981f8 100644 (file)
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -44,7 +44,7 @@
 #define AT91_SRAM_VIRT_BASE    (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE)
 
 /* Serial ports */
-#define AT91_NR_UART           5               /* 4 USART3's and one DBGU port */
+#define ATMEL_MAX_UART         5               /* 4 USART3's and one DBGU port */
 
 /* FLASH */
 #define AT91_FLASH_BASE                0x10000000      /* NCS0: Flash physical base address */

diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index 39368e18ab2027e94e2e8772046356e4bf8d8279..82e5404d2f48e53307730e88463e0f7de6677a5f 100644 (file)
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -9,8 +9,8 @@
 /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
 void at32_add_system_devices(void);
 
-#define AT91_NR_UART   4
-extern struct platform_device *at91_default_console_device;
+#define ATMEL_MAX_UART 4
+extern struct platform_device *atmel_default_console_device;
 
 struct platform_device *at32_add_device_usart(unsigned int id);