* Add ide_pio_cycle_time() helper.
* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers
  (previously cycle time given by the device was only used for "pio" == 255).
* Remove no longer needed ide_pio_data_t.cycle_time field.
v2:
* Fix "ata_" prefix (Noticed by Jeff).
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
        return -1;
 }
 
+unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
+{
+       struct hd_driveid *id = drive->id;
+       int cycle_time = 0;
+
+       if (id->field_valid & 2) {
+               if (id->capability & 8)
+                       cycle_time = id->eide_pio_iordy;
+               else
+                       cycle_time = id->eide_pio;
+       }
+
+       /* conservative "downgrade" for all pre-ATA2 drives */
+       if (pio < 3) {
+               if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time)
+                       cycle_time = 0; /* use standard timing */
+       }
+
+       return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time;
+}
+
+EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
+
 /**
  *     ide_get_best_pio_mode   -       get PIO mode from drive
  *     @drive: drive to consider
 u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
 {
        int pio_mode;
-       int cycle_time = 0;
        struct hd_driveid* id = drive->id;
        int overridden  = 0;
 
                }
                if (id->field_valid & 2) {        /* drive implements ATA2? */
                        if (id->capability & 8) { /* IORDY supported? */
-                               cycle_time = id->eide_pio_iordy;
                                if (id->eide_pio_modes & 7) {
                                        overridden = 0;
                                        if (id->eide_pio_modes & 4)
                                        else
                                                pio_mode = 3;
                                }
-                       } else {
-                               cycle_time = id->eide_pio;
                        }
                }
 
                        pio_mode--;
                        printk(KERN_INFO "%s: applying conservative "
                                         "PIO \"downgrade\"\n", drive->name);
-                       if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
-                               cycle_time = 0; /* use standard timing */
                }
        }
-       if (pio_mode > max_mode) {
+
+       if (pio_mode > max_mode)
                pio_mode = max_mode;
-               cycle_time = 0;
-       }
-       if (d) {
+
+       if (d)
                d->pio_mode = pio_mode;
-               d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
-       }
+
        return pio_mode;
 }
 
 
        int time1, time2;
        u8 param1, param2, param3, param4;
        unsigned long flags;
-       ide_pio_data_t d;
        int bus_speed = system_bus_clock();
 
-       pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, &d);
+       pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, NULL);
 
        /* calculate timing, according to PIO mode */
-       time1 = d.cycle_time;
+       time1 = ide_pio_cycle_time(drive, pio);
        time2 = ide_pio_timings[pio].active_time;
        param3 = param1 = (time2 * bus_speed + 999) / 1000;
        param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
 
 {
        int active_time, recovery_time;
        int active_cycles, recovery_cycles;
-       ide_pio_data_t d;
        int bus_speed = system_bus_clock();
        
         if (pio) {
-               pio = ide_get_best_pio_mode(drive, pio, 5, &d);
-               
+               unsigned int cycle_time;
+
+               pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+               cycle_time = ide_pio_cycle_time(drive, pio);
+
                /*
                 *  Just like opti621.c we try to calculate the
                 *  actual cycle time for recovery and activity
                 *  according system bus speed.
                 */
                active_time = ide_pio_timings[pio].active_time;
-               recovery_time = d.cycle_time 
+               recovery_time = cycle_time
                        - active_time
                        - ide_pio_timings[pio].setup_time;
                /*
 
 
 static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
 {
-       ide_pio_data_t d;
        int base = HWIF(drive)->select_data;
+       unsigned int cycle_time;
        int active_time   = 175;
        int recovery_time = 415; /* worst case values from the dos driver */
 
        if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
-               pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+               pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+               cycle_time = ide_pio_cycle_time(drive, pio);
 
                switch (pio) {
                        case 0: break;
                        case 3:
-                               if (d.cycle_time >= 110) {
+                               if (cycle_time >= 110) {
                                        active_time = 86;
-                                       recovery_time = d.cycle_time - 102;
+                                       recovery_time = cycle_time - 102;
                                } else
                                        printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
                                break;
                        case 4:
-                               if (d.cycle_time >= 69) {
+                               if (cycle_time >= 69) {
                                        active_time = 70;
-                                       recovery_time = d.cycle_time - 61;
+                                       recovery_time = cycle_time - 61;
                                } else
                                        printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
                                break;
                        default:
-                               if (d.cycle_time >= 180) {
+                               if (cycle_time >= 180) {
                                        active_time = 110;
-                                       recovery_time = d.cycle_time - 120;
+                                       recovery_time = cycle_time - 120;
                                } else {
                                        active_time = ide_pio_timings[pio].active_time;
-                                       recovery_time = d.cycle_time
-                                                       -active_time;
+                                       recovery_time = cycle_time - active_time;
                                }
                }
                printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio);
 
  */
 static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
 {
+       unsigned int index = 0, cycle_time;
        u8 b;
-       ide_pio_data_t  d;
-       unsigned int index = 0;
 
        while (drive != cmd_drives[index]) {
                if (++index > 3) {
                        return;
        }
 
-       (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
-       cmd640_set_mode (index, d.pio_mode, d.cycle_time);
+       mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+       cycle_time = ide_pio_cycle_time(drive, mode_wanted);
+       cmd640_set_mode(index, mode_wanted, cycle_time);
 
        printk("%s: selected cmd640 PIO mode%d (%dns)",
-               drive->name,
-               d.pio_mode,
-               d.cycle_time);
+               drive->name, mode_wanted, cycle_time);
 
        display_clocks(index);
 }
 
 {
        ide_hwif_t *hwif        = HWIF(drive);
        struct pci_dev *dev     = hwif->pci_dev;
-       ide_pio_data_t pio;
+       unsigned int cycle_time;
        u8 pio_mode, setup_count, arttim = 0;
        static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
        static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-       pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &pio);
+
+       pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+       cycle_time = ide_pio_cycle_time(drive, pio_mode);
 
        cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
-                 drive->name, mode_wanted, pio_mode, pio.cycle_time);
+                 drive->name, mode_wanted, pio_mode, cycle_time);
 
-       program_cycle_times(drive, pio.cycle_time,
+       program_cycle_times(drive, cycle_time,
                            ide_pio_timings[pio_mode].active_time);
 
        setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
 
  * Convert a PIO mode and cycle time to the required on/off times
  * for the interface.  This has protection against runaway timings.
  */
-static unsigned int get_pio_timings(ide_drive_t *drive, ide_pio_data_t *p)
+static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
 {
        unsigned int cmd_on, cmd_off;
        u8 iordy = 0;
 
-       cmd_on  = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
-       cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;
+       cmd_on  = (ide_pio_timings[pio].active_time + 29) / 30;
+       cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
 
        if (cmd_on == 0)
                cmd_on = 1;
        if (cmd_off == 0)
                cmd_off = 1;
 
-       if (p->pio_mode > 2 || ide_dev_has_iordy(drive->id))
+       if (pio > 2 || ide_dev_has_iordy(drive->id))
                iordy = 0x40;
 
        return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
 {
        struct pci_dev *dev     = HWIF(drive)->pci_dev;
        int reg                 = 0x44 + drive->dn * 4;
-       ide_pio_data_t p;
        u16 drv_ctrl;
 
        DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
 
-       pio = ide_get_best_pio_mode(drive, pio, 5, &p);
+       pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
 
-       drv_ctrl = get_pio_timings(drive, &p);
+       drv_ctrl = get_pio_timings(drive, pio);
 
        /*
         * Store the PIO timings so that we can restore them
        }
 
        printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
-              ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl);
+                         ide_xfer_verbose(pio + XFER_PIO_0),
+                         ide_pio_cycle_time(drive, pio), drv_ctrl);
 
        return pio;
 }
 
 static void
 pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
 {
-       ide_pio_data_t d;
        u32 *timings;
        unsigned accessTicks, recTicks;
        unsigned accessTime, recTime;
        pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
-       
+       unsigned int cycle_time;
+
        if (pmif == NULL)
                return;
                
        /* which drive is it ? */
        timings = &pmif->timings[drive->select.b.unit & 0x01];
 
-       pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+       pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+       cycle_time = ide_pio_cycle_time(drive, pio);
 
        switch (pmif->kind) {
        case controller_sh_ata6: {
                /* 133Mhz cell */
-               u32 tr = kauai_lookup_timing(shasta_pio_timings, d.cycle_time);
+               u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
                if (tr == 0)
                        return;
                *timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
        case controller_un_ata6:
        case controller_k2_ata6: {
                /* 100Mhz cell */
-               u32 tr = kauai_lookup_timing(kauai_pio_timings, d.cycle_time);
+               u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
                if (tr == 0)
                        return;
                *timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
                }
        case controller_kl_ata4:
                /* 66Mhz cell */
-               recTime = d.cycle_time - ide_pio_timings[pio].active_time
+               recTime = cycle_time - ide_pio_timings[pio].active_time
                                - ide_pio_timings[pio].setup_time;
                recTime = max(recTime, 150U);
                accessTime = ide_pio_timings[pio].active_time;
        default: {
                /* 33Mhz cell */
                int ebit = 0;
-               recTime = d.cycle_time - ide_pio_timings[pio].active_time
+               recTime = cycle_time - ide_pio_timings[pio].active_time
                                - ide_pio_timings[pio].setup_time;
                recTime = max(recTime, 150U);
                accessTime = ide_pio_timings[pio].active_time;
 
 
 typedef struct ide_pio_data_s {
        u8 pio_mode;
-       unsigned int cycle_time;
 } ide_pio_data_t;
 
+unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
 extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
 extern const ide_pio_timings_t ide_pio_timings[6];