[PATCH] Alpha: ISA IRQs fixup for dp264

Basically, this extends original dp264 fixup to all dp264 variations.
Here is one minor change: mask out bits 4-7 of a value assigned by SRM,
because
- newer consoles report ISA IRQs with offset 0xe0;
- even if console IRQ value is bogus, we'll have a value < 16
  so it should be harmless as it won't clash with native IRQs.

Particularly this fixes USB interrupt problem on xp1000 and es40.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index 9e36b07fa940a09e197db647456ceffdb10d2698..d5da6b1b28eec6cd557942ff1684f371a9ccc22a 100644 (file)
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -394,6 +394,22 @@ clipper_init_irq(void)
  *  10  64 bit PCI option slot 3 (not bus 0)
  */
 
+static int __init
+isa_irq_fixup(struct pci_dev *dev, int irq)
+{
+       u8 irq8;
+
+       if (irq > 0)
+               return irq;
+
+       /* This interrupt is routed via ISA bridge, so we'll
+          just have to trust whatever value the console might
+          have assigned.  */
+       pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
+
+       return irq8 & 0xf;
+}
+
 static int __init
 dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
@@ -407,25 +423,13 @@ dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
                { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0}  /* IdSel 10 slot 3 */
        };
        const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
-
        struct pci_controller *hose = dev->sysdata;
        int irq = COMMON_TABLE_LOOKUP;
 
-       if (irq > 0) {
+       if (irq > 0)
                irq += 16 * hose->index;
-       } else {
-               /* ??? The Contaq IDE controller on the ISA bridge uses
-                  "legacy" interrupts 14 and 15.  I don't know if anything
-                  can wind up at the same slot+pin on hose1, so we'll
-                  just have to trust whatever value the console might
-                  have assigned.  */
-
-               u8 irq8;
-               pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
-               irq = irq8;
-       }
 
-       return irq;
+       return isa_irq_fixup(dev, irq);
 }
 
 static int __init
@@ -453,7 +457,8 @@ monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
                {    24,    24,    25,    26,    27}  /* IdSel 15 slot 5 PCI2*/
        };
        const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
-       return COMMON_TABLE_LOOKUP;
+
+       return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
 static u8 __init
@@ -507,7 +512,8 @@ webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
                {    47,    47,    46,    45,    44}, /* IdSel 17 slot 3 */
        };
        const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
-       return COMMON_TABLE_LOOKUP;
+
+       return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
 static int __init
@@ -524,14 +530,13 @@ clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
                {    -1,    -1,    -1,    -1,    -1}  /* IdSel 7 ISA Bridge */
        };
        const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
-
        struct pci_controller *hose = dev->sysdata;
        int irq = COMMON_TABLE_LOOKUP;
 
        if (irq > 0)
                irq += 16 * hose->index;
 
-       return irq;
+       return isa_irq_fixup(dev, irq);
 }
 
 static void __init