--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Freescale DIU Frame Buffer device driver
+ *
+ * Authors: Hongjun Chen <hong-jun.chen@freescale.com>
+ * Paul Widmer <paul.widmer@freescale.com>
+ * Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ * York Sun <yorksun@freescale.com>
+ *
+ * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+
+#include <linux/of_platform.h>
+
+#include <sysdev/fsl_soc.h>
+#include "fsl-diu-fb.h"
+
+/*
+ * These parameters give default parameters
+ * for video output 1024x768,
+ * FIXME - change timing to proper amounts
+ * hsync 31.5kHz, vsync 60Hz
+ */
+static struct fb_videomode __devinitdata fsl_diu_default_mode = {
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 160,
+ .right_margin = 24,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 136,
+ .vsync_len = 6,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
+ {
+ .name = "1024x768-60",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 160,
+ .right_margin = 24,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 136,
+ .vsync_len = 6,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .name = "1024x768-70",
+ .refresh = 70,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 16886,
+ .left_margin = 3,
+ .right_margin = 3,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 40,
+ .vsync_len = 18,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .name = "1024x768-75",
+ .refresh = 75,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15009,
+ .left_margin = 3,
+ .right_margin = 3,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 80,
+ .vsync_len = 32,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .name = "1280x1024-60",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9375,
+ .left_margin = 38,
+ .right_margin = 128,
+ .upper_margin = 2,
+ .lower_margin = 7,
+ .hsync_len = 216,
+ .vsync_len = 37,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .name = "1280x1024-70",
+ .refresh = 70,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9380,
+ .left_margin = 6,
+ .right_margin = 6,
+ .upper_margin = 4,
+ .lower_margin = 4,
+ .hsync_len = 60,
+ .vsync_len = 94,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .name = "1280x1024-75",
+ .refresh = 75,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9380,
+ .left_margin = 6,
+ .right_margin = 6,
+ .upper_margin = 4,
+ .lower_margin = 4,
+ .hsync_len = 60,
+ .vsync_len = 15,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .name = "320x240", /* for AOI only */
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 15385,
+ .left_margin = 0,
+ .right_margin = 0,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .hsync_len = 0,
+ .vsync_len = 0,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .name = "1280x480-60",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 480,
+ .pixclock = 18939,
+ .left_margin = 353,
+ .right_margin = 47,
+ .upper_margin = 39,
+ .lower_margin = 4,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+};
+
+static char *fb_mode = "1024x768-32@60";
+static unsigned long default_bpp = 32;
+static int monitor_port;
+
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+static u8 *coherence_data;
+static size_t coherence_data_size;
+static unsigned int d_cache_line_size;
+#endif
+
+static DEFINE_SPINLOCK(diu_lock);
+
+struct fsl_diu_data {
+ struct fb_info *fsl_diu_info[FSL_AOI_NUM - 1];
+ /*FSL_AOI_NUM has one dummy AOI */
+ struct device_attribute dev_attr;
+ struct diu_ad *dummy_ad;
+ void *dummy_aoi_virt;
+ unsigned int irq;
+ int fb_enabled;
+ int monitor_port;
+};
+
+struct mfb_info {
+ int index;
+ int type;
+ char *id;
+ int registered;
+ int blank;
+ unsigned long pseudo_palette[16];
+ struct diu_ad *ad;
+ int cursor_reset;
+ unsigned char g_alpha;
+ unsigned int count;
+ int x_aoi_d; /* aoi display x offset to physical screen */
+ int y_aoi_d; /* aoi display y offset to physical screen */
+ struct fsl_diu_data *parent;
+};
+
+
+static struct mfb_info mfb_template[] = {
+ { /* AOI 0 for plane 0 */
+ .index = 0,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel0",
+ .registered = 0,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
+ },
+ { /* AOI 0 for plane 1 */
+ .index = 1,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel1 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
+ },
+ { /* AOI 1 for plane 1 */
+ .index = 2,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel1 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 480,
+ },
+ { /* AOI 0 for plane 2 */
+ .index = 3,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel2 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 0,
+ },
+ { /* AOI 1 for plane 2 */
+ .index = 4,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel2 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 480,
+ },
+};
+
+static struct diu_hw dr = {
+ .mode = MFB_MODE1,
+ .reg_lock = __SPIN_LOCK_UNLOCKED(diu_hw.reg_lock),
+};
+
+static struct diu_pool pool;
+
+/* To allocate memory for framebuffer. First try __get_free_pages(). If it
+ * fails, try rh_alloc. The reason is __get_free_pages() cannot allocate
+ * very large memory (more than 4MB). We don't want to allocate all memory
+ * in rheap since small memory allocation/deallocation will fragment the
+ * rheap and make the furture large allocation fail.
+ */
+
+void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
+{
+ void *virt;
+
+ pr_debug("size=%lu\n", size);
+
+ virt = (void *)__get_free_pages(GFP_DMA | __GFP_ZERO, get_order(size));
+ if (virt) {
+ *phys = virt_to_phys(virt);
+ pr_debug("virt %p, phys=%llx\n", virt, (uint64_t) *phys);
+ return virt;
+ }
+ if (!diu_ops.diu_mem) {
+ printk(KERN_INFO "%s: no diu_mem."
+ " To reserve more memory, put 'diufb=15M' "
+ "in the command line\n", __func__);
+ return NULL;
+ }
+
+ virt = (void *)rh_alloc(&diu_ops.diu_rh_info, size, "DIU");
+ if (virt) {
+ *phys = virt_to_bus(virt);
+ memset(virt, 0, size);
+ }
+
+ pr_debug("rh virt=%p phys=%lx\n", virt, *phys);
+
+ return virt;
+}
+
+void fsl_diu_free(void *p, unsigned long size)
+{
+ pr_debug("p=%p size=%lu\n", p, size);
+
+ if (!p)
+ return;
+
+ if ((p >= diu_ops.diu_mem) &&
+ (p < (diu_ops.diu_mem + diu_ops.diu_size))) {
+ pr_debug("rh\n");
+ rh_free(&diu_ops.diu_rh_info, (unsigned long) p);
+ } else {
+ pr_debug("dma\n");
+ free_pages((unsigned long)p, get_order(size));
+ }
+}
+
+static int fsl_diu_enable_panel(struct fb_info *info)
+{
+ struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
+ struct diu *hw = dr.diu_reg;
+ struct diu_ad *ad = mfbi->ad;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+ int res = 0;
+
+ pr_debug("enable_panel index %d\n", mfbi->index);
+ if (mfbi->type != MFB_TYPE_OFF) {
+ switch (mfbi->index) {
+ case 0: /* plane 0 */
+ if (hw->desc[0] != ad->paddr)
+ out_be32(&hw->desc[0], ad->paddr);
+ break;
+ case 1: /* plane 1 AOI 0 */
+ cmfbi = machine_data->fsl_diu_info[2]->par;
+ if (hw->desc[1] != ad->paddr) { /* AOI0 closed */
+ if (cmfbi->count > 0) /* AOI1 open */
+ ad->next_ad =
+ cpu_to_le32(cmfbi->ad->paddr);
+ else
+ ad->next_ad = 0;
+ out_be32(&hw->desc[1], ad->paddr);
+ }
+ break;
+ case 3: /* plane 2 AOI 0 */
+ cmfbi = machine_data->fsl_diu_info[4]->par;
+ if (hw->desc[2] != ad->paddr) { /* AOI0 closed */
+ if (cmfbi->count > 0) /* AOI1 open */
+ ad->next_ad =
+ cpu_to_le32(cmfbi->ad->paddr);
+ else
+ ad->next_ad = 0;
+ out_be32(&hw->desc[2], ad->paddr);
+ }
+ break;
+ case 2: /* plane 1 AOI 1 */
+ pmfbi = machine_data->fsl_diu_info[1]->par;
+ ad->next_ad = 0;
+ if (hw->desc[1] == machine_data->dummy_ad->paddr)
+ out_be32(&hw->desc[1], ad->paddr);
+ else /* AOI0 open */
+ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+ break;
+ case 4: /* plane 2 AOI 1 */
+ pmfbi = machine_data->fsl_diu_info[3]->par;
+ ad->next_ad = 0;
+ if (hw->desc[2] == machine_data->dummy_ad->paddr)
+ out_be32(&hw->desc[2], ad->paddr);
+ else /* AOI0 was open */
+ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+ break;
+ default:
+ res = -EINVAL;
+ break;
+ }
+ } else
+ res = -EINVAL;
+ return res;
+}
+
+static int fsl_diu_disable_panel(struct fb_info *info)
+{
+ struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
+ struct diu *hw = dr.diu_reg;
+ struct diu_ad *ad = mfbi->ad;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+ int res = 0;
+
+ switch (mfbi->index) {
+ case 0: /* plane 0 */
+ if (hw->desc[0] != machine_data->dummy_ad->paddr)
+ out_be32(&hw->desc[0],
+ machine_data->dummy_ad->paddr);
+ break;
+ case 1: /* plane 1 AOI 0 */
+ cmfbi = machine_data->fsl_diu_info[2]->par;
+ if (cmfbi->count > 0) /* AOI1 is open */
+ out_be32(&hw->desc[1], cmfbi->ad->paddr);
+ /* move AOI1 to the first */
+ else /* AOI1 was closed */
+ out_be32(&hw->desc[1],
+ machine_data->dummy_ad->paddr);
+ /* close AOI 0 */
+ break;
+ case 3: /* plane 2 AOI 0 */
+ cmfbi = machine_data->fsl_diu_info[4]->par;
+ if (cmfbi->count > 0) /* AOI1 is open */
+ out_be32(&hw->desc[2], cmfbi->ad->paddr);
+ /* move AOI1 to the first */
+ else /* AOI1 was closed */
+ out_be32(&hw->desc[2],
+ machine_data->dummy_ad->paddr);
+ /* close AOI 0 */
+ break;
+ case 2: /* plane 1 AOI 1 */
+ pmfbi = machine_data->fsl_diu_info[1]->par;
+ if (hw->desc[1] != ad->paddr) {
+ /* AOI1 is not the first in the chain */
+ if (pmfbi->count > 0)
+ /* AOI0 is open, must be the first */
+ pmfbi->ad->next_ad = 0;
+ } else /* AOI1 is the first in the chain */
+ out_be32(&hw->desc[1], machine_data->dummy_ad->paddr);
+ /* close AOI 1 */
+ break;
+ case 4: /* plane 2 AOI 1 */
+ pmfbi = machine_data->fsl_diu_info[3]->par;
+ if (hw->desc[2] != ad->paddr) {
+ /* AOI1 is not the first in the chain */
+ if (pmfbi->count > 0)
+ /* AOI0 is open, must be the first */
+ pmfbi->ad->next_ad = 0;
+ } else /* AOI1 is the first in the chain */
+ out_be32(&hw->desc[2], machine_data->dummy_ad->paddr);
+ /* close AOI 1 */
+ break;
+ default:
+ res = -EINVAL;
+ break;
+ }
+
+ return res;
+}
+
+static void enable_lcdc(struct fb_info *info)
+{
+ struct diu *hw = dr.diu_reg;
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+
+ if (!machine_data->fb_enabled) {
+ out_be32(&hw->diu_mode, dr.mode);
+ machine_data->fb_enabled++;
+ }
+}
+
+static void disable_lcdc(struct fb_info *info)
+{
+ struct diu *hw = dr.diu_reg;
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+
+ if (machine_data->fb_enabled) {
+ out_be32(&hw->diu_mode, 0);
+ machine_data->fb_enabled = 0;
+ }
+}
+
+static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+ int available_height, upper_aoi_bottom, index = mfbi->index;
+ int lower_aoi_is_open, upper_aoi_is_open;
+ __u32 base_plane_width, base_plane_height, upper_aoi_height;
+
+ base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
+ base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
+
+ switch (index) {
+ case 0:
+ if (mfbi->x_aoi_d != 0)
+ mfbi->x_aoi_d = 0;
+ if (mfbi->y_aoi_d != 0)
+ mfbi->y_aoi_d = 0;
+ break;
+ case 1: /* AOI 0 */
+ case 3:
+ lower_aoi_mfbi = machine_data->fsl_diu_info[index+1]->par;
+ lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
+ if (var->xres > base_plane_width)
+ var->xres = base_plane_width;
+ if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
+ mfbi->x_aoi_d = base_plane_width - var->xres;
+
+ if (lower_aoi_is_open)
+ available_height = lower_aoi_mfbi->y_aoi_d;
+ else
+ available_height = base_plane_height;
+ if (var->yres > available_height)
+ var->yres = available_height;
+ if ((mfbi->y_aoi_d + var->yres) > available_height)
+ mfbi->y_aoi_d = available_height - var->yres;
+ break;
+ case 2: /* AOI 1 */
+ case 4:
+ upper_aoi_mfbi = machine_data->fsl_diu_info[index-1]->par;
+ upper_aoi_height =
+ machine_data->fsl_diu_info[index-1]->var.yres;
+ upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height;
+ upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0;
+ if (var->xres > base_plane_width)
+ var->xres = base_plane_width;
+ if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
+ mfbi->x_aoi_d = base_plane_width - var->xres;
+ if (mfbi->y_aoi_d < 0)
+ mfbi->y_aoi_d = 0;
+ if (upper_aoi_is_open) {
+ if (mfbi->y_aoi_d < upper_aoi_bottom)
+ mfbi->y_aoi_d = upper_aoi_bottom;
+ available_height = base_plane_height
+ - upper_aoi_bottom;
+ } else
+ available_height = base_plane_height;
+ if (var->yres > available_height)
+ var->yres = available_height;
+ if ((mfbi->y_aoi_d + var->yres) > base_plane_height)
+ mfbi->y_aoi_d = base_plane_height - var->yres;
+ break;
+ }
+}
+/*
+ * Checks to see if the hardware supports the state requested by var passed
+ * in. This function does not alter the hardware state! If the var passed in
+ * is slightly off by what the hardware can support then we alter the var
+ * PASSED in to what we can do. If the hardware doesn't support mode change
+ * a -EINVAL will be returned by the upper layers.
+ */
+static int fsl_diu_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ unsigned long htotal, vtotal;
+
+ pr_debug("check_var xres: %d\n", var->xres);
+ pr_debug("check_var yres: %d\n", var->yres);
+
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if (var->xoffset < 0)
+ var->xoffset = 0;
+
+ if (var->yoffset < 0)
+ var->yoffset = 0;
+
+ if (var->xoffset + info->var.xres > info->var.xres_virtual)
+ var->xoffset = info->var.xres_virtual - info->var.xres;
+
+ if (var->yoffset + info->var.yres > info->var.yres_virtual)
+ var->yoffset = info->var.yres_virtual - info->var.yres;
+
+ if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+ (var->bits_per_pixel != 16))
+ var->bits_per_pixel = default_bpp;
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
+
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
+
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 0;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 16;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+
+ break;
+ }
+ /* If the pixclock is below the minimum spec'd value then set to
+ * refresh rate for 60Hz since this is supported by most monitors.
+ * Refer to Documentation/fb/ for calculations.
+ */
+ if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) {
+ htotal = var->xres + var->right_margin + var->hsync_len +
+ var->left_margin;
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
+ var->upper_margin;
+ var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+ var->pixclock = KHZ2PICOS(var->pixclock);
+ pr_debug("pixclock set for 60Hz refresh = %u ps\n",
+ var->pixclock);
+ }
+
+ var->height = -1;
+ var->width = -1;
+ var->grayscale = 0;
+
+ /* Copy nonstd field to/from sync for fbset usage */
+ var->sync |= var->nonstd;
+ var->nonstd |= var->sync;
+
+ adjust_aoi_size_position(var, info);
+ return 0;
+}
+
+static void set_fix(struct fb_info *info)
+{
+ struct fb_fix_screeninfo *fix = &info->fix;
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+
+ strncpy(fix->id, mfbi->id, strlen(mfbi->id));
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+}
+
+static void update_lcdc(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+ struct diu *hw;
+ int i, j;
+ char __iomem *cursor_base, *gamma_table_base;
+
+ u32 temp;
+
+ hw = dr.diu_reg;
+
+ if (mfbi->type == MFB_TYPE_OFF) {
+ fsl_diu_disable_panel(info);
+ return;
+ }
+
+ diu_ops.set_monitor_port(machine_data->monitor_port);
+ gamma_table_base = pool.gamma.vaddr;
+ cursor_base = pool.cursor.vaddr;
+ /* Prep for DIU init - gamma table, cursor table */
+
+ for (i = 0; i <= 2; i++)
+ for (j = 0; j <= 255; j++)
+ *gamma_table_base++ = j;
+
+ diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr);
+
+ pr_debug("update-lcdc: HW - %p\n Disabling DIU\n", hw);
+ disable_lcdc(info);
+
+ /* Program DIU registers */
+
+ out_be32(&hw->gamma, pool.gamma.paddr);
+ out_be32(&hw->cursor, pool.cursor.paddr);
+
+ out_be32(&hw->bgnd, 0x007F7F7F); /* BGND */
+ out_be32(&hw->bgnd_wb, 0); /* BGND_WB */
+ out_be32(&hw->disp_size, (var->yres << 16 | var->xres));
+ /* DISP SIZE */
+ pr_debug("DIU xres: %d\n", var->xres);
+ pr_debug("DIU yres: %d\n", var->yres);
+
+ out_be32(&hw->wb_size, 0); /* WB SIZE */
+ out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */
+
+ /* Horizontal and vertical configuration register */
+ temp = var->left_margin << 22 | /* BP_H */
+ var->hsync_len << 11 | /* PW_H */
+ var->right_margin; /* FP_H */
+
+ out_be32(&hw->hsyn_para, temp);
+
+ temp = var->upper_margin << 22 | /* BP_V */
+ var->vsync_len << 11 | /* PW_V */
+ var->lower_margin; /* FP_V */
+
+ out_be32(&hw->vsyn_para, temp);
+
+ pr_debug("DIU right_margin - %d\n", var->right_margin);
+ pr_debug("DIU left_margin - %d\n", var->left_margin);
+ pr_debug("DIU hsync_len - %d\n", var->hsync_len);
+ pr_debug("DIU upper_margin - %d\n", var->upper_margin);
+ pr_debug("DIU lower_margin - %d\n", var->lower_margin);
+ pr_debug("DIU vsync_len - %d\n", var->vsync_len);
+ pr_debug("DIU HSYNC - 0x%08x\n", hw->hsyn_para);
+ pr_debug("DIU VSYNC - 0x%08x\n", hw->vsyn_para);
+
+ diu_ops.set_pixel_clock(var->pixclock);
+
+ out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */
+ out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */
+ out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */
+ out_be32(&hw->plut, 0x01F5F666);
+
+ /* Enable the DIU */
+ enable_lcdc(info);
+}
+
+static int map_video_memory(struct fb_info *info)
+{
+ phys_addr_t phys;
+
+ pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
+ pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
+ pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
+
+ info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
+ pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
+ info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
+ if (info->screen_base == 0) {
+ printk(KERN_ERR "Unable to allocate fb memory\n");
+ return -ENOMEM;
+ }
+ info->fix.smem_start = (unsigned long) phys;
+ info->screen_size = info->fix.smem_len;
+
+ pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
+ info->fix.smem_start,
+ info->fix.smem_len);
+ pr_debug("screen base %p\n", info->screen_base);
+
+ return 0;
+}
+
+static void unmap_video_memory(struct fb_info *info)
+{
+ fsl_diu_free(info->screen_base, info->fix.smem_len);
+ info->screen_base = 0;
+ info->fix.smem_start = 0;
+ info->fix.smem_len = 0;
+}
+
+/*
+ * Using the fb_var_screeninfo in fb_info we set the resolution of this
+ * particular framebuffer. This function alters the fb_fix_screeninfo stored
+ * in fb_info. It does not alter var in fb_info since we are using that
+ * data. This means we depend on the data in var inside fb_info to be
+ * supported by the hardware. fsl_diu_check_var is always called before
+ * fsl_diu_set_par to ensure this.
+ */
+static int fsl_diu_set_par(struct fb_info *info)
+{
+ unsigned long len;
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+ struct diu_ad *ad = mfbi->ad;
+ struct diu *hw;
+
+ hw = dr.diu_reg;
+
+ set_fix(info);
+ mfbi->cursor_reset = 1;
+
+ len = info->var.yres_virtual * info->fix.line_length;
+ /* Alloc & dealloc each time resolution/bpp change */
+ if (len != info->fix.smem_len) {
+ if (info->fix.smem_start)
+ unmap_video_memory(info);
+ pr_debug("SET PAR: smem_len = %d\n", info->fix.smem_len);
+
+ /* Memory allocation for framebuffer */
+ if (map_video_memory(info)) {
+ printk(KERN_ERR "Unable to allocate fb memory 1\n");
+ return -ENOMEM;
+ }
+ }
+
+ ad->pix_fmt =
+ diu_ops.get_pixel_format(var->bits_per_pixel,
+ machine_data->monitor_port);
+ ad->addr = cpu_to_le32(info->fix.smem_start);
+ ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
+ var->xres) | mfbi->g_alpha;
+ /* fix me. AOI should not be greater than display size */
+ ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres);
+ ad->offset_xyi = 0;
+ ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+
+ /* Disable chroma keying function */
+ ad->ckmax_r = 0;
+ ad->ckmax_g = 0;
+ ad->ckmax_b = 0;
+
+ ad->ckmin_r = 255;
+ ad->ckmin_g = 255;
+ ad->ckmin_b = 255;
+
+ if (mfbi->index == 0)
+ update_lcdc(info);
+ return 0;
+}
+
+static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
+{
+ return ((val<<width) + 0x7FFF - val)>>16;
+}
+
+/*
+ * Set a single color register. The values supplied have a 16 bit magnitude
+ * which needs to be scaled in this function for the hardware. Things to take
+ * into consideration are how many color registers, if any, are supported with
+ * the current color visual. With truecolor mode no color palettes are
+ * supported. Here a psuedo palette is created which we store the value in
+ * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
+ * color palette.
+ */
+static int fsl_diu_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp, struct fb_info *info)
+{
+ int ret = 1;
+
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (info->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = info->pseudo_palette;
+ u32 v;
+
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ pal[regno] = v;
+ ret = 0;
+ }
+ break;
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Pan (or wrap, depending on the `vmode' field) the display using the
+ * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values
+ * don't fit, return -EINVAL.
+ */
+static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ if ((info->var.xoffset == var->xoffset) &&
+ (info->var.yoffset == var->yoffset))
+ return 0; /* No change, do nothing */
+
+ if (var->xoffset < 0 || var->yoffset < 0
+ || var->xoffset + info->var.xres > info->var.xres_virtual
+ || var->yoffset + info->var.yres > info->var.yres_virtual)
+ return -EINVAL;
+
+ info->var.xoffset = var->xoffset;
+ info->var.yoffset = var->yoffset;
+
+ if (var->vmode & FB_VMODE_YWRAP)
+ info->var.vmode |= FB_VMODE_YWRAP;
+ else
+ info->var.vmode &= ~FB_VMODE_YWRAP;
+
+ return 0;
+}
+
+/*
+ * Blank the screen if blank_mode != 0, else unblank. Return 0 if blanking
+ * succeeded, != 0 if un-/blanking failed.
+ * blank_mode == 2: suspend vsync
+ * blank_mode == 3: suspend hsync
+ * blank_mode == 4: powerdown
+ */
+static int fsl_diu_blank(int blank_mode, struct fb_info *info)
+{
+ struct mfb_info *mfbi = info->par;
+
+ mfbi->blank = blank_mode;
+
+ switch (blank_mode) {
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ /* FIXME: fixes to enable_panel and enable lcdc needed */
+ case FB_BLANK_NORMAL:
+ /* fsl_diu_disable_panel(info);*/
+ break;
+ case FB_BLANK_POWERDOWN:
+ /* disable_lcdc(info); */
+ break;
+ case FB_BLANK_UNBLANK:
+ /* fsl_diu_enable_panel(info);*/
+ break;
+ }
+
+ return 0;
+}
+
+static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct mfb_info *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+ struct mfb_chroma_key ck;
+ unsigned char global_alpha;
+ struct aoi_display_offset aoi_d;
+ __u32 pix_fmt;
+ void __user *buf = (void __user *)arg;
+
+ if (!arg)
+ return -EINVAL;
+ switch (cmd) {
+ case MFB_SET_PIXFMT:
+ if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
+ return -EFAULT;
+ ad->pix_fmt = pix_fmt;
+ pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt);
+ break;
+ case MFB_GET_PIXFMT:
+ pix_fmt = ad->pix_fmt;
+ if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
+ return -EFAULT;
+ pr_debug("get pixel format 0x%08x\n", ad->pix_fmt);
+ break;
+ case MFB_SET_AOID:
+ if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
+ return -EFAULT;
+ mfbi->x_aoi_d = aoi_d.x_aoi_d;
+ mfbi->y_aoi_d = aoi_d.y_aoi_d;
+ pr_debug("set AOI display offset of index %d to (%d,%d)\n",
+ mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
+ fsl_diu_check_var(&info->var, info);
+ fsl_diu_set_par(info);
+ break;
+ case MFB_GET_AOID:
+ aoi_d.x_aoi_d = mfbi->x_aoi_d;
+ aoi_d.y_aoi_d = mfbi->y_aoi_d;
+ if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
+ return -EFAULT;
+ pr_debug("get AOI display offset of index %d (%d,%d)\n",
+ mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
+ break;
+ case MFB_GET_ALPHA:
+ global_alpha = mfbi->g_alpha;
+ if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
+ return -EFAULT;
+ pr_debug("get global alpha of index %d\n", mfbi->index);
+ break;
+ case MFB_SET_ALPHA:
+ /* set panel information */
+ if (copy_from_user(&global_alpha, buf, sizeof(global_alpha)))
+ return -EFAULT;
+ ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
+ (global_alpha & 0xff);
+ mfbi->g_alpha = global_alpha;
+ pr_debug("set global alpha for index %d\n", mfbi->index);
+ break;
+ case MFB_SET_CHROMA_KEY:
+ /* set panel winformation */
+ if (copy_from_user(&ck, buf, sizeof(ck)))
+ return -EFAULT;
+
+ if (ck.enable &&
+ (ck.red_max < ck.red_min ||
+ ck.green_max < ck.green_min ||
+ ck.blue_max < ck.blue_min))
+ return -EINVAL;
+
+ if (!ck.enable) {
+ ad->ckmax_r = 0;
+ ad->ckmax_g = 0;
+ ad->ckmax_b = 0;
+ ad->ckmin_r = 255;
+ ad->ckmin_g = 255;
+ ad->ckmin_b = 255;
+ } else {
+ ad->ckmax_r = ck.red_max;
+ ad->ckmax_g = ck.green_max;
+ ad->ckmax_b = ck.blue_max;
+ ad->ckmin_r = ck.red_min;
+ ad->ckmin_g = ck.green_min;
+ ad->ckmin_b = ck.blue_min;
+ }
+ pr_debug("set chroma key\n");
+ break;
+ case FBIOGET_GWINFO:
+ if (mfbi->type == MFB_TYPE_OFF)
+ return -ENODEV;
+ /* get graphic window information */
+ if (copy_to_user(buf, ad, sizeof(*ad)))
+ return -EFAULT;
+ break;
+ case FBIOGET_HWCINFO:
+ pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO);
+ break;
+ case FBIOPUT_MODEINFO:
+ pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO);
+ break;
+ case FBIOGET_DISPINFO:
+ pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO);
+ break;
+
+ default:
+ printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd);
+ return -ENOIOCTLCMD;
+ }
+
+ return 0;
+}
+
+/* turn on fb if count == 1
+ */
+static int fsl_diu_open(struct fb_info *info, int user)
+{
+ struct mfb_info *mfbi = info->par;
+ int res = 0;
+
+ spin_lock(&diu_lock);
+ mfbi->count++;
+ if (mfbi->count == 1) {
+ pr_debug("open plane index %d\n", mfbi->index);
+ fsl_diu_check_var(&info->var, info);
+ res = fsl_diu_set_par(info);
+ if (res < 0)
+ mfbi->count--;
+ else {
+ res = fsl_diu_enable_panel(info);
+ if (res < 0)
+ mfbi->count--;
+ }
+ }
+
+ spin_unlock(&diu_lock);
+ return res;
+}
+
+/* turn off fb if count == 0
+ */
+static int fsl_diu_release(struct fb_info *info, int user)
+{
+ struct mfb_info *mfbi = info->par;
+ int res = 0;
+
+ spin_lock(&diu_lock);
+ mfbi->count--;
+ if (mfbi->count == 0) {
+ pr_debug("release plane index %d\n", mfbi->index);
+ res = fsl_diu_disable_panel(info);
+ if (res < 0)
+ mfbi->count++;
+ }
+ spin_unlock(&diu_lock);
+ return res;
+}
+
+static struct fb_ops fsl_diu_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = fsl_diu_check_var,
+ .fb_set_par = fsl_diu_set_par,
+ .fb_setcolreg = fsl_diu_setcolreg,
+ .fb_blank = fsl_diu_blank,
+ .fb_pan_display = fsl_diu_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_ioctl = fsl_diu_ioctl,
+ .fb_open = fsl_diu_open,
+ .fb_release = fsl_diu_release,
+};
+
+static int init_fbinfo(struct fb_info *info)
+{
+ struct mfb_info *mfbi = info->par;
+
+ info->device = NULL;
+ info->var.activate = FB_ACTIVATE_NOW;
+ info->fbops = &fsl_diu_ops;
+ info->flags = FBINFO_FLAG_DEFAULT;
+ info->pseudo_palette = &mfbi->pseudo_palette;
+
+ /* Allocate colormap */
+ fb_alloc_cmap(&info->cmap, 16, 0);
+ return 0;
+}
+
+static int install_fb(struct fb_info *info)
+{
+ int rc;
+ struct mfb_info *mfbi = info->par;
+ const char *aoi_mode, *init_aoi_mode = "320x240";
+
+ if (init_fbinfo(info))
+ return -EINVAL;
+
+ if (mfbi->index == 0) /* plane 0 */
+ aoi_mode = fb_mode;
+ else
+ aoi_mode = init_aoi_mode;
+ pr_debug("mode used = %s\n", aoi_mode);
+ rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
+ ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp);
+
+ switch (rc) {
+ case 1:
+ pr_debug("using mode specified in @mode\n");
+ break;
+ case 2:
+ pr_debug("using mode specified in @mode "
+ "with ignored refresh rate\n");
+ break;
+ case 3:
+ pr_debug("using mode default mode\n");
+ break;
+ case 4:
+ pr_debug("using mode from list\n");
+ break;
+ default:
+ pr_debug("rc = %d\n", rc);
+ pr_debug("failed to find mode\n");
+ return -EINVAL;
+ break;
+ }
+
+ pr_debug("xres_virtual %d\n", info->var.xres_virtual);
+ pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
+
+ pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
+ pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
+
+ if (mfbi->type == MFB_TYPE_OFF)
+ mfbi->blank = FB_BLANK_NORMAL;
+ else
+ mfbi->blank = FB_BLANK_UNBLANK;
+
+ if (fsl_diu_check_var(&info->var, info)) {
+ printk(KERN_ERR "fb_check_var failed");
+ fb_dealloc_cmap(&info->cmap);
+ return -EINVAL;
+ }
+
+ if (fsl_diu_set_par(info)) {
+ printk(KERN_ERR "fb_set_par failed");
+ fb_dealloc_cmap(&info->cmap);
+ return -EINVAL;
+ }
+
+ if (register_framebuffer(info) < 0) {
+ printk(KERN_ERR "register_framebuffer failed");
+ unmap_video_memory(info);
+ fb_dealloc_cmap(&info->cmap);
+ return -EINVAL;
+ }
+
+ mfbi->registered = 1;
+ printk(KERN_INFO "fb%d: %s fb device registered successfully.\n",
+ info->node, info->fix.id);
+
+ return 0;
+}
+
+static void __exit uninstall_fb(struct fb_info *info)
+{
+ struct mfb_info *mfbi = info->par;
+
+ if (!mfbi->registered)
+ return;
+
+ unregister_framebuffer(info);
+ unmap_video_memory(info);
+ if (&info->cmap)
+ fb_dealloc_cmap(&info->cmap);
+
+ mfbi->registered = 0;
+}
+
+static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
+{
+ struct diu *hw = dr.diu_reg;
+ unsigned int status = in_be32(&hw->int_status);
+
+ if (status) {
+ /* This is the workaround for underrun */
+ if (status & INT_UNDRUN) {
+ out_be32(&hw->diu_mode, 0);
+ pr_debug("Err: DIU occurs underrun!\n");
+ udelay(1);
+ out_be32(&hw->diu_mode, 1);
+ }
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ else if (status & INT_VSYNC) {
+ unsigned int i;
+ for (i = 0; i < coherence_data_size;
+ i += d_cache_line_size)
+ __asm__ __volatile__ (
+ "dcbz 0, %[input]"
+ ::[input]"r"(&coherence_data[i]));
+ }
+#endif
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static int request_irq_local(int irq)
+{
+ unsigned long status, ints;
+ struct diu *hw;
+ int ret;
+
+ hw = dr.diu_reg;
+
+ /* Read to clear the status */
+ status = in_be32(&hw->int_status);
+
+ ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0);
+ if (ret)
+ pr_info("Request diu IRQ failed.\n");
+ else {
+ ints = INT_PARERR | INT_LS_BF_VS;
+#if !defined(CONFIG_NOT_COHERENT_CACHE)
+ ints |= INT_VSYNC;
+#endif
+ if (dr.mode == MFB_MODE2 || dr.mode == MFB_MODE3)
+ ints |= INT_VSYNC_WB;
+
+ /* Read to clear the status */
+ status = in_be32(&hw->int_status);
+ out_be32(&hw->int_mask, ints);
+ }
+ return ret;
+}
+
+static void free_irq_local(int irq)
+{
+ struct diu *hw = dr.diu_reg;
+
+ /* Disable all LCDC interrupt */
+ out_be32(&hw->int_mask, 0x1f);
+
+ free_irq(irq, 0);
+}
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks. Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int fsl_diu_suspend(struct of_device *dev, pm_message_t state)
+{
+ struct fsl_diu_data *machine_data;
+
+ machine_data = dev_get_drvdata(&ofdev->dev);
+ disable_lcdc(machine_data->fsl_diu_info[0]);
+
+ return 0;
+}
+
+static int fsl_diu_resume(struct of_device *dev)
+{
+ struct fsl_diu_data *machine_data;
+
+ machine_data = dev_get_drvdata(&ofdev->dev);
+ enable_lcdc(machine_data->fsl_diu_info[0]);
+
+ return 0;
+}
+
+#else
+#define fsl_diu_suspend NULL
+#define fsl_diu_resume NULL
+#endif /* CONFIG_PM */
+
+/* Align to 64-bit(8-byte), 32-byte, etc. */
+static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+{
+ u32 offset, ssize;
+ u32 mask;
+ dma_addr_t paddr = 0;
+
+ ssize = size + bytes_align;
+ buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO);
+ if (!buf->vaddr)
+ return -ENOMEM;
+
+ buf->paddr = (__u32) paddr;
+
+ mask = bytes_align - 1;
+ offset = (u32)buf->paddr & mask;
+ if (offset) {
+ buf->offset = bytes_align - offset;
+ buf->paddr = (u32)buf->paddr + offset;
+ } else
+ buf->offset = 0;
+ return 0;
+}
+
+static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+{
+ dma_free_coherent(0, size + bytes_align,
+ buf->vaddr, (buf->paddr - buf->offset));
+ return;
+}
+
+static ssize_t store_monitor(struct device *device,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int old_monitor_port;
+ unsigned long val;
+ struct fsl_diu_data *machine_data =
+ container_of(attr, struct fsl_diu_data, dev_attr);
+
+ if (strict_strtoul(buf, 10, &val))
+ return 0;
+
+ old_monitor_port = machine_data->monitor_port;
+ machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);
+
+ if (old_monitor_port != machine_data->monitor_port) {
+ /* All AOIs need adjust pixel format
+ * fsl_diu_set_par only change the pixsel format here
+ * unlikely to fail. */
+ fsl_diu_set_par(machine_data->fsl_diu_info[0]);
+ fsl_diu_set_par(machine_data->fsl_diu_info[1]);
+ fsl_diu_set_par(machine_data->fsl_diu_info[2]);
+ fsl_diu_set_par(machine_data->fsl_diu_info[3]);
+ fsl_diu_set_par(machine_data->fsl_diu_info[4]);
+ }
+ return count;
+}
+
+static ssize_t show_monitor(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct fsl_diu_data *machine_data =
+ container_of(attr, struct fsl_diu_data, dev_attr);
+ return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
+}
+
+static int fsl_diu_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = ofdev->node;
+ struct mfb_info *mfbi;
+ phys_addr_t dummy_ad_addr;
+ int ret, i, error = 0;
+ struct resource res;
+ struct fsl_diu_data *machine_data;
+
+ machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL);
+ if (!machine_data)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
+ machine_data->fsl_diu_info[i] =
+ framebuffer_alloc(sizeof(struct mfb_info), &ofdev->dev);
+ if (!machine_data->fsl_diu_info[i]) {
+ dev_err(&ofdev->dev, "cannot allocate memory\n");
+ ret = -ENOMEM;
+ goto error2;
+ }
+ mfbi = machine_data->fsl_diu_info[i]->par;
+ memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
+ mfbi->parent = machine_data;
+ }
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ dev_err(&ofdev->dev, "could not obtain DIU address\n");
+ goto error;
+ }
+ if (!res.start) {
+ dev_err(&ofdev->dev, "invalid DIU address\n");
+ goto error;
+ }
+ dev_dbg(&ofdev->dev, "%s, res.start: 0x%08x\n", __func__, res.start);
+
+ dr.diu_reg = ioremap(res.start, sizeof(struct diu));
+ if (!dr.diu_reg) {
+ dev_err(&ofdev->dev, "Err: can't map DIU registers!\n");
+ ret = -EFAULT;
+ goto error2;
+ }
+
+ out_be32(&dr.diu_reg->diu_mode, 0); /* disable DIU anyway*/
+
+ /* Get the IRQ of the DIU */
+ machine_data->irq = irq_of_parse_and_map(np, 0);
+
+ if (!machine_data->irq) {
+ dev_err(&ofdev->dev, "could not get DIU IRQ\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ machine_data->monitor_port = monitor_port;
+
+ /* Area descriptor memory pool aligns to 64-bit boundary */
+ if (allocate_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
+ return -ENOMEM;
+
+ /* Get memory for Gamma Table - 32-byte aligned memory */
+ if (allocate_buf(&pool.gamma, 768, 32)) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* For performance, cursor bitmap buffer aligns to 32-byte boundary */
+ if (allocate_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32)) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ i = ARRAY_SIZE(machine_data->fsl_diu_info);
+ machine_data->dummy_ad = (struct diu_ad *)
+ ((u32)pool.ad.vaddr + pool.ad.offset) + i;
+ machine_data->dummy_ad->paddr = pool.ad.paddr +
+ i * sizeof(struct diu_ad);
+ machine_data->dummy_aoi_virt = fsl_diu_alloc(64, &dummy_ad_addr);
+ if (!machine_data->dummy_aoi_virt) {
+ ret = -ENOMEM;
+ goto error;
+ }
+ machine_data->dummy_ad->addr = cpu_to_le32(dummy_ad_addr);
+ machine_data->dummy_ad->pix_fmt = 0x88882317;
+ machine_data->dummy_ad->src_size_g_alpha = cpu_to_le32((4 << 12) | 4);
+ machine_data->dummy_ad->aoi_size = cpu_to_le32((4 << 16) | 2);
+ machine_data->dummy_ad->offset_xyi = 0;
+ machine_data->dummy_ad->offset_xyd = 0;
+ machine_data->dummy_ad->next_ad = 0;
+
+ out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
+ out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
+ out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);
+
+ for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
+ machine_data->fsl_diu_info[i]->fix.smem_start = 0;
+ mfbi = machine_data->fsl_diu_info[i]->par;
+ mfbi->ad = (struct diu_ad *)((u32)pool.ad.vaddr
+ + pool.ad.offset) + i;
+ mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad);
+ ret = install_fb(machine_data->fsl_diu_info[i]);
+ if (ret) {
+ dev_err(&ofdev->dev,
+ "Failed to register framebuffer %d\n",
+ i);
+ goto error;
+ }
+ }
+
+ if (request_irq_local(machine_data->irq)) {
+ dev_err(machine_data->fsl_diu_info[0]->dev,
+ "could not request irq for diu.");
+ goto error;
+ }
+
+ machine_data->dev_attr.attr.name = "monitor";
+ machine_data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
+ machine_data->dev_attr.show = show_monitor;
+ machine_data->dev_attr.store = store_monitor;
+ error = device_create_file(machine_data->fsl_diu_info[0]->dev,
+ &machine_data->dev_attr);
+ if (error) {
+ dev_err(machine_data->fsl_diu_info[0]->dev,
+ "could not create sysfs %s file\n",
+ machine_data->dev_attr.attr.name);
+ }
+
+ dev_set_drvdata(&ofdev->dev, machine_data);
+ return 0;
+
+error:
+ for (i = ARRAY_SIZE(machine_data->fsl_diu_info);
+ i > 0; i--)
+ uninstall_fb(machine_data->fsl_diu_info[i - 1]);
+ if (pool.ad.vaddr)
+ free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+ if (pool.gamma.vaddr)
+ free_buf(&pool.gamma, 768, 32);
+ if (pool.cursor.vaddr)
+ free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+ if (machine_data->dummy_aoi_virt)
+ fsl_diu_free(machine_data->dummy_aoi_virt, 64);
+ iounmap(dr.diu_reg);
+
+error2:
+ for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
+ if (machine_data->fsl_diu_info[i])
+ framebuffer_release(machine_data->fsl_diu_info[i]);
+ kfree(machine_data);
+
+ return ret;
+}
+
+
+static int fsl_diu_remove(struct of_device *ofdev)
+{
+ struct fsl_diu_data *machine_data;
+ int i;
+
+ machine_data = dev_get_drvdata(&ofdev->dev);
+ disable_lcdc(machine_data->fsl_diu_info[0]);
+ free_irq_local(machine_data->irq);
+ for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
+ uninstall_fb(machine_data->fsl_diu_info[i - 1]);
+ if (pool.ad.vaddr)
+ free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+ if (pool.gamma.vaddr)
+ free_buf(&pool.gamma, 768, 32);
+ if (pool.cursor.vaddr)
+ free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+ if (machine_data->dummy_aoi_virt)
+ fsl_diu_free(machine_data->dummy_aoi_virt, 64);
+ iounmap(dr.diu_reg);
+ for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
+ if (machine_data->fsl_diu_info[i])
+ framebuffer_release(machine_data->fsl_diu_info[i]);
+ kfree(machine_data);
+
+ return 0;
+}
+
+#ifndef MODULE
+static int __init fsl_diu_setup(char *options)
+{
+ char *opt;
+ unsigned long val;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ if (!strncmp(opt, "monitor=", 8)) {
+ if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
+ monitor_port = val;
+ } else if (!strncmp(opt, "bpp=", 4)) {
+ if (!strict_strtoul(opt + 4, 10, &val))
+ default_bpp = val;
+ } else
+ fb_mode = opt;
+ }
+
+ return 0;
+}
+#endif
+
+static struct of_device_id fsl_diu_match[] = {
+ {
+ .compatible = "fsl,diu",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_diu_match);
+
+static struct of_platform_driver fsl_diu_driver = {
+ .owner = THIS_MODULE,
+ .name = "fsl_diu",
+ .match_table = fsl_diu_match,
+ .probe = fsl_diu_probe,
+ .remove = fsl_diu_remove,
+ .suspend = fsl_diu_suspend,
+ .resume = fsl_diu_resume,
+};
+
+static int __init fsl_diu_init(void)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ struct device_node *np;
+ const u32 *prop;
+#endif
+ int ret;
+#ifndef MODULE
+ char *option;
+
+ /*
+ * For kernel boot options (in 'video=xxxfb:<options>' format)
+ */
+ if (fb_get_options("fslfb", &option))
+ return -ENODEV;
+ fsl_diu_setup(option);
+#endif
+ printk(KERN_INFO "Freescale DIU driver\n");
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ np = of_find_node_by_type(NULL, "cpu");
+ if (!np) {
+ printk(KERN_ERR "Err: can't find device node 'cpu'\n");
+ return -ENODEV;
+ }
+
+ prop = of_get_property(np, "d-cache-size", NULL);
+ if (prop == NULL)
+ return -ENODEV;
+
+ /* Freescale PLRU requires 13/8 times the cache size to do a proper
+ displacement flush
+ */
+ coherence_data_size = *prop * 13;
+ coherence_data_size /= 8;
+
+ prop = of_get_property(np, "d-cache-line-size", NULL);
+ if (prop == NULL)
+ return -ENODEV;
+ d_cache_line_size = *prop;
+
+ of_node_put(np);
+ coherence_data = vmalloc(coherence_data_size);
+ if (!coherence_data)
+ return -ENOMEM;
+#endif
+ ret = of_register_platform_driver(&fsl_diu_driver);
+ if (ret) {
+ printk(KERN_ERR
+ "fsl-diu: failed to register platform driver\n");
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ vfree(coherence_data);
+#endif
+ iounmap(dr.diu_reg);
+ }
+ return ret;
+}
+
+static void __exit fsl_diu_exit(void)
+{
+ of_unregister_platform_driver(&fsl_diu_driver);
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ vfree(coherence_data);
+#endif
+}
+
+module_init(fsl_diu_init);
+module_exit(fsl_diu_exit);
+
+MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
+MODULE_DESCRIPTION("Freescale DIU framebuffer driver");
+MODULE_LICENSE("GPL");
+
+module_param_named(mode, fb_mode, charp, 0);
+MODULE_PARM_DESC(mode,
+ "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+module_param_named(bpp, default_bpp, ulong, 0);
+MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
+module_param_named(monitor, monitor_port, int, 0);
+MODULE_PARM_DESC(monitor,
+ "Specify the monitor port (0, 1 or 2) if supported by the platform");
+
projects / linux-2.6-omap-h63xx.git / commitdiff