#ifdef CONFIG_M68VZ328
        #define CPU "MC68VZ328"
 #endif
-#ifdef CONFIG_M68332
-       #define CPU "MC68332"
-#endif
 #ifdef CONFIG_M68360
        #define CPU "MC68360"
 #endif
 
 #define        NE2000_BYTE             volatile unsigned char
 #endif
 
-#if defined(CONFIG_CFV240)
-#define NE2000_ADDR             0x40010000
-#define NE2000_ADDR1            0x40010001
-#define NE2000_ODDOFFSET        0x00000000
-#define NE2000_IRQ              1
-#define NE2000_IRQ_VECTOR       0x19
-#define NE2000_IRQ_PRIORITY     2
-#define NE2000_IRQ_LEVEL        1
-#define        NE2000_BYTE             volatile unsigned char
-#endif
-
 #if defined(CONFIG_M5307C3)
 #define NE2000_ADDR            0x40000300
 #define NE2000_ODDOFFSET       0x00010000
  *     On most NE2000 implementations on ColdFire boards the chip is
  *     mapped in kinda funny, due to its ISA heritage.
  */
-#ifdef CONFIG_CFV240
-#define NE2000_PTR(addr)       (NE2000_ADDR + ((addr & 0x3f) << 1) + 1)
-#define NE2000_DATA_PTR(addr)  (NE2000_ADDR + ((addr & 0x3f) << 1))
-#else
 #define        NE2000_PTR(addr)        ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
 #define        NE2000_DATA_PTR(addr)   (addr)
-#endif
 
 
 void ne2000_outb(unsigned int val, unsigned int addr)
 }
 #endif
 
-#if defined(CONFIG_CFV240)
-void ne2000_irqsetup(int irq)
-{
-       volatile unsigned char  *icrp;
-
-       icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR1);
-       *icrp = MCFSIM_ICR_LEVEL1 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
-       mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT1);
-}
-#endif
-
 #if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
 void ne2000_irqsetup(int irq)
 {
 
  *     Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
  *     5307 or 5407 specific addresses.
  */
-#if defined(CONFIG_M5204)
-#include <asm/m5204sim.h>
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
 #include <asm/m5206sim.h>
 #elif defined(CONFIG_M520x)
 #include <asm/m520xsim.h>
 
 /*
  *     Get address specific defines for this ColdFire member.
  */
-#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
 #define        MCFTIMER_BASE1          0x100           /* Base address of TIMER1 */
 #define        MCFTIMER_BASE2          0x120           /* Base address of TIMER2 */
 #elif defined(CONFIG_M5272)
 
 #if defined(CONFIG_M5272)
 #define        MCFUART_BASE1           0x100           /* Base address of UART1 */
 #define        MCFUART_BASE2           0x140           /* Base address of UART2 */
-#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
 #if defined(CONFIG_NETtel)
 #define        MCFUART_BASE1           0x180           /* Base address of UART1 */
 #define        MCFUART_BASE2           0x140           /* Base address of UART2 */
 
 }
 
 
-#ifdef CONFIG_M68332
-#define HARD_RESET_NOW() ({            \
-        local_irq_disable();           \
-        asm("                          \
-       movew   #0x0000, 0xfffa6a;      \
-        reset;                         \
-        /*movew #0x1557, 0xfffa44;*/   \
-        /*movew #0x0155, 0xfffa46;*/   \
-        moveal #0, %a0;                        \
-        movec %a0, %vbr;               \
-        moveal 0, %sp;                 \
-        moveal 4, %a0;                 \
-        jmp (%a0);                     \
-        ");                            \
-})
-#endif
-
 #if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
        defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
 #define HARD_RESET_NOW() ({            \