ide: tighten checks on PCI BARs in ide_hwif_configure()

Alan has fixed PCI layer handling of PCI IDE in Compatibility mode so
PCI BAR 0/1 (and/or 2/3) content reported by kernel should never be zero.

Tighten checks on PCI BARs and also fix printk() message while on it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 3dea5a59626e18762f9ff34f825bcee9041611c1..166211f53f17ade5b55a1c3916b36a43e36dbb02 100644 (file)
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -319,18 +319,18 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
 
                ctl  = pci_resource_start(dev, 2*port+1);
                base = pci_resource_start(dev, 2*port);
-               if ((ctl && !base) || (base && !ctl)) {
-                       printk(KERN_ERR "%s: inconsistent baseregs (BIOS) "
-                               "for port %d, skipping\n", d->name, port);
-                       return NULL;
-               }
-       }
-       if (!ctl) {
+       } else {
                /* Use default values */
                ctl = port ? 0x374 : 0x3f4;
                base = port ? 0x170 : 0x1f0;
        }
 
+       if (!base || !ctl) {
+               printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
+                               d->name, port);
+               return NULL;
+       }
+
        hwif = ide_find_port_slot(d);
        if (hwif == NULL) {
                printk(KERN_ERR "%s: too many IDE interfaces, no room in "