#define PHB_MEM_2_SIZE_LOW     0x02E0
 #define PHB_DOSHOLE_OFFSET     0x08E0
 
+/* CalIOC2 specific */
+#define PHB_SAVIOR_L2           0x0DB0
+
 /* PHB_CONFIG_RW */
 #define PHB_TCE_ENABLE         0x20000000
 #define PHB_SLOT_DISABLE       0x1C000000
 
 static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 static void calgary_tce_cache_blast(struct iommu_table *tbl);
+static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 
 static struct cal_chipset_ops calgary_chip_ops = {
        .handle_quirks = calgary_handle_quirks,
        .tce_cache_blast = calgary_tce_cache_blast
 };
 
+static struct cal_chipset_ops calioc2_chip_ops = {
+       .handle_quirks = calioc2_handle_quirks,
+       .tce_cache_blast = NULL
+};
+
 static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
 
 /* enable this to stress test the chip's TCE cache */
        tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
        tce_free(tbl, 0, tbl->it_size);
 
-       tbl->chip_ops = &calgary_chip_ops;
+       if (is_calgary(dev->device))
+               tbl->chip_ops = &calgary_chip_ops;
+       else if (is_calioc2(dev->device))
+               tbl->chip_ops = &calioc2_chip_ops;
+       else
+               BUG();
 
        calgary_reserve_regions(dev);
 
        readq(target); /* flush */
 }
 
-static void __init calgary_handle_quirks(struct iommu_table *tbl,
-       struct pci_dev *dev)
+static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev)
+{
+       unsigned char busnum = dev->bus->number;
+       void __iomem *bbar = tbl->bbar;
+       void __iomem *target;
+       u32 val;
+
+       /*
+        * CalIOC2 designers recommend setting bit 8 in 0xnDB0 to 1
+        */
+       target = calgary_reg(bbar, phb_offset(busnum) | PHB_SAVIOR_L2);
+       val = cpu_to_be32(readl(target));
+       val |= 0x00800000;
+       writel(cpu_to_be32(val), target);
+}
+
+static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev)
 {
        unsigned char busnum = dev->bus->number;
 
         * Give split completion a longer timeout on bus 1 for aic94xx
         * http://bugzilla.kernel.org/show_bug.cgi?id=7180
         */
-       if (busnum == 1)
+       if (is_calgary(dev->device) && (busnum == 1))
                calgary_set_split_completion_timeout(tbl->bbar, busnum,
                                                     CCR_2SEC_TIMEOUT);
 }